- 30 Oct, 2015 24 commits
-
-
Matthew R. Ochs authored
Sparse uncovered several errors with MMIO operations (accessing directly) and handling endianness. These can cause issues when running in different environments. Introduce __iomem and proper endianness tags/swaps where appropriate to make driver sparse clean. Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
Manoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com>
-
Matthew R. Ochs authored
Several function prologs have incorrect parameter names and return code descriptions. This can lead to confusion when reviewing the source and creates inaccurate documentation. To remedy, update the function prologs to properly reflect parameter names and return codes. Signed-off-by:
-
Matthew R. Ochs authored
The host reset handler is called with I/O already blocked, thus there is no need to explicitly block and unblock I/O in the handler. Signed-off-by:
-
Matthew R. Ochs authored
When the device reset handler is entered while a reset operation is taking place, the handler exits without actually sending a reset (TMF) to the targeted device. This behavior is incorrect as the device is not reset. Further complicating matters is the fact that a success is returned even when the TMF was not sent. To fix, the state is rechecked after coming out of the reset state. When the state is normal, a TMF will be sent out. Signed-off-by:
-
Matthew R. Ochs authored
The workq can process work in parallel with a remove event, leading to a condition where the workq handler can access freed memory. To remedy, the workq should be terminated prior to freeing memory. Move the termination call earlier in remove and use cancel_work_sync() instead of flush_work() as there is not a need to process any scheduled work when shutting down. Signed-off-by:
-
Matthew R. Ochs authored
Currently, scsi_host_put() is being called prematurely in the remove path and is missing entirely in an error cleanup path. The former can lead to memory being freed too early with subsequent access potentially corrupting data whilst the former would result in a memory leak. Move the usage on remove to be the last cleanup action taken and introduce a call to scsi_host_put() in the one initialization error path that does not use remove to cleanup. Signed-off-by:
-
Matthew R. Ochs authored
The AFU version is stored as a non-terminated string of bytes within a 64-bit little-endian register. Presently the value is read directly (no MMIO accessor) and is stored in a buffer that is not big enough to contain a NULL terminator. Additionally the version obtained is not evaluated against a known value to prevent usage with unsupported AFUs. All of these deficiencies can lead to a variety of problems. To remedy, use the correct MMIO accessor to read the version value into a null-terminated buffer and add a check to prevent an incompatible AFU from being used with this driver. Signed-off-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
-
Matthew R. Ochs authored
At present, both ports must be online for the device to configure properly. Remove this dependency and the unnecessary internal LUN override logic as well. Additionally, as a refactoring measure, change the return code variable name to match that used throughout the driver. With this change, the card will be able to configure even when the link is down. At some later point when the link is transitioned to 'up', a link state change interrupt will trigger the port configuration. Note that despite its void-like behavior, the function was left with a return code for right now in case its behavior needs to be altered again in the near future based on testing. Signed-off-by:
-
Matthew R. Ochs authored
A bug was introduced earlier in the development cycle when cleaning up logic statements. Instead of skipping bits that are not set, set bits are skipped, causing async interrupts to not be handled correctly. To fix, simply add back in the proper evaluation for an unset bit. Signed-off-by:
-
Matthew R. Ochs authored
Following a link up event, the LUNs available to the host may have changed. Without rescanning the host, the LUN topology is unknown to the user. In such a state, the user would be unable to locate provisioned resources. To remedy, the host should be rescanned after a link up event. Signed-off-by:
-
Matthew R. Ochs authored
The resid is incorrectly set which can lead to unnecessary retry attempts by the stack. This is due to resid _always_ being set using a value returned from the adapter. Instead, the value should only be interpreted and set when in an underrun scenario. Signed-off-by:
-
Matthew R. Ochs authored
Borrowing the TMF waitq's spinlock causes a stall condition when waiting for the TMF to complete. To remedy, introduce our own spin lock to serialize TMF and use the appropriate wait services. Also add a timeout while waiting for a TMF completion. When a TMF times out, report back a failure such that a bigger hammer reset can occur. Signed-off-by:
-
Matthew R. Ochs authored
During run-time the driver can be very chatty and spam the system kernel log. Various print statements can be limited and/or moved to development-only mode. Additionally, numerous prints can be converted to trace the corresponding device. Lastly, one spelling correction was made: 'entra' to 'extra'. The following changes were made: - pr_debug to pr_devel - pr_debug to pr_debug_ratelimited - pr_err to dev_err - pr_debug to dev_dbg Signed-off-by:
-
Matthew R. Ochs authored
Implement the following suggestions and add two new attributes to allow for debugging the port LUN table. - use scnprintf() instead of snprintf() - use DEVICE_ATTR_RO and DEVICE_ATTR_RW Suggested-by:
Shane Seymour <shane.seymour@hp.com> Signed-off-by:
-
Matthew R. Ochs authored
Found during code inspection, that the following functions are not being used outside of the file where they are defined. Make them static. int cxlflash_send_cmd(struct afu *, struct afu_cmd *); void cxlflash_wait_resp(struct afu *, struct afu_cmd *); int cxlflash_afu_reset(struct cxlflash_cfg *); struct afu_cmd *cxlflash_cmd_checkout(struct afu *); void cxlflash_cmd_checkin(struct afu_cmd *); void init_pcr(struct cxlflash_cfg *); int init_global(struct cxlflash_cfg *); Signed-off-by:
-
Matthew R. Ochs authored
Limbo is not an accurate representation of this state and is also not consistent with the terminology that other drivers use to represent this concept. Rename the state and and its associated waitq to 'reset'. Signed-off-by:
-
Matthew R. Ochs authored
During an EEH freeze event, certain CXL services should not be called until after the hardware reset has taken place. Doing so can result in unnecessary failures and possibly cause other ill effects by triggering hardware accesses. This translates to a requirement to quiesce all threads that may potentially use CXL runtime service during this window. In particular, multiple ioctls make use of the CXL services when acting on contexts on behalf of the user. Thus, it is essential to 'drain' running ioctls _before_ proceeding with handling the EEH freeze event. Create the ability to drain ioctls by wrapping the ioctl handler call in a read semaphore and then implementing a small routine that obtains the write semaphore, effectively creating a wait point for all currently executing ioctls. Signed-off-by:
-
Matthew R. Ochs authored
The context encode mask covers more than 32-bits, making it a long integer. This should be noted by appending the ULL width suffix to the mask. Signed-off-by:
-
Matthew R. Ochs authored
Using sizeof(bool) is considered poor form for various reasons and sparse warns us of that. Correct by changing type from bool to u8. Signed-off-by:
-
Matthew R. Ochs authored
If the same virtual LUN is accessed over multiple cards, only accesses made over the first card will be valid. Accesses made over the second card will go to the wrong LUN causing data corruption. This is because the global LUN's mode word was being used to determine whether the LUN table for that card needs to be programmed. The mode word would be setup by the first card, causing the LUN table for the second card to not be programmed. By unconditionally initializing the LUN table (not depending on the mode word), the problem is avoided. Signed-off-by:
-
Matthew R. Ochs authored
When a LUN is removed, the sdev that is associated with the LUN remains intact until its reference count drops to 0. In order to prevent an sdev from being removed while a context is still associated with it, obtain an additional reference per-context for each LUN attached to the context. This resolves a potential Oops in the release handler when a dealing with a LUN that has already been removed. Signed-off-by:
-
Manoj Kumar authored
The timeout value for read capacity is too small. Certain devices may take longer to respond and thus the command may prematurely timeout. Additionally the literal used for the timeout is stale. Update the timeout to 30 seconds (matches the value used in sd.c) and rework the timeout literal to a more appropriate description. Signed-off-by:
-
Manoj Kumar authored
Magic numbers are not meaningful and can create confusion. As a remedy, replace them with descriptive literals. Replace 512 with literal MAX_SECTOR_UNIT. Replace 5 with literal CMD_RETRIES. Signed-off-by:
-
Manoj Kumar authored
If two concurrent MANAGE_LUN ioctls are issued with the same WWID parameter, it would result in an incorrect value of port_sel. This is because port_sel is modified without any locks being held. If the first caller stalls after the return from find_and_create_lun(), the value of port_sel will be set incorrectly to indicate a single port, though in this case it should have been set to both ports. To fix, use the global mutex to serialize the lookup of the WWID and the subsequent modification of port_sel. Signed-off-by:
-
- 27 Oct, 2015 16 commits
-
-
Alan Stern authored
The "compatible" matching algorithm used for looking up old-style blacklist entries in a scsi_dev_info_list is buggy. The core of the algorithm looks like this: if (memcmp(devinfo->vendor, vendor, min(max, strlen(devinfo->vendor)))) /* not a match */ where max is the length of the device's vendor string after leading spaces have been removed but trailing spaces have not. Because of the min() computation, either entry could be a proper substring of the other and the code would still think that they match. In the case originally reported, the device's vendor and product strings were "Inateck " and " ". These matched against the following entry in the global device list: {"", "Scanner", "1.80", BLIST_NOLUN} because "" is a substring of "Inateck " and "" (the result of removing leading spaces from the device's product string) is a substring of "Scanner". The mistaken match prevented the system from scanning and finding the device's second Logical Unit. This patch fixes the problem by making two changes. First, the code for leading-space removal is hoisted out of the loop. (This means it will sometimes run unnecessarily, but since a large percentage of all lookups involve the "compatible" entries in global device list, this should be an overall improvement.) Second and more importantly, the patch removes trailing spaces and adds a check to verify that the two resulting strings are exactly the same length. This prevents matches where one entry is a proper substring of the other. Signed-off-by:Alan Stern <stern@rowland.harvard.edu> Reported-by:
Giulio Bernardi <ugilio@gmail.com> Tested-by:
-
Alan Stern authored
In drivers/scsi/scsi_devinfo.c, the scsi_dev_info_list_del_keyed() and scsi_get_device_flags_keyed() routines contain a large amount of duplicate code for finding vendor/product matches in a scsi_dev_info_list. This patch factors out the duplicate code and puts it in a separate function, scsi_dev_info_list_find(). Signed-off-by:
-
Maurizio Lombardi authored
the kernel prints some warnings when compiled with CONFIG_DMA_API_DEBUG. This is because the fnic driver doesn't check the return value of pci_map_single(). [ 11.942770] scsi host12: fnic [ 11.950811] ------------[ cut here ]------------ [ 11.950818] WARNING: at lib/dma-debug.c:937 check_unmap+0x47b/0x920() [ 11.950821] fnic 0000:0c:00.0: DMA-API: device driver failed to check map error[device address=0x0000002020a30040] [size=44 bytes] [mapped as single] Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed By: Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Ketan Mukadam authored
We would like to get the following updates in: Revert ownership to "Emulex" from "Avago Technologies" Signed-off-by:Ketan Mukadam <ketan.mukadam@avagotech.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Ketan Mukadam authored
Signed-off-by:
-
Shirish Pargaonkar authored
Do not log error for netevents that need no action such as NETDEV_REGISTER 0x0005, NETDEV_CHANGEADDR, and NETDEV_CHANGENAME. It results in logging error messages such as these [ 35.315872] bnx2fc: Unknown netevent 5 [ 35.315935] bnx2fc: Unknown netevent 8 [ 35.353866] bnx2fc: Unknown netevent 10 and generating bug reports. Remove logging this message as an ERROR instead of turning them into either DEBUG or INFO level messages. Signed-off-by:
Shirish Pargaonkar <spargaonkar@suse.com> Acked-by:
Eddie Wai <eddie.wai@broadcom.com> Acked-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by:
James Smart <james.smart@avagotech.com> Signed-off-by:
-
James Smart authored
Initial link up defaults were not properly being tracked relative to initial FLOGI or pt2pt PLOGI. Add code to initialize them. Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
James Smart authored
Forgot to clear FCF Discovery in-progress flag upon FLOGI failures. Thus we didn't restart FLOGI. Signed-off-by:
-
James Smart authored
Fix for discovery failure in PT2PT when FLOGI's ELS ACC response gets aborted Change login state machine to: - Restart FLOGI if prior is ABTS'd - Reject incoming FLOGIs if we have one pending The above ensures that we always finish FLOGI processing, regardless of who initated FLOGI, before processing PLOGI's. Signed-off-by:
-
James Smart authored
Signed-off-by:
-
Ales Novak authored
lpfc_send_rscn_event() allocates data for sizeof(struct lpfc_rscn_event_header) + payload_len, but claims that the data has size of sizeof(struct lpfc_els_event_header) + payload_len. That leads to buffer overruns. Signed-off-by:
Ales Novak <alnovak@suse.cz> Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Sebastian Herbszt <herbszt@gmx.de> Signed-off-by:
-
Sebastian Herbszt authored
Remove set but not used variables. Signed-off-by:
-
Nicholas Krause authored
lpfc:Make the function lpfc_sli4_mbox_completions_pending static in order to comply with function prototype This makes the function lpfc_sli4_mbox_completion's definition static now in order to comply with its prototype being also declared as static too. Signed-off-by:
Nicholas Krause <xerofoify@gmail.com> Signed-off-by:
-
Ian Mitchell authored
This patch allows the LPFC to start up without a fatal kernel bug based on an exceeded KMALLOC_MAX_SIZE and a too large NR_CPU-based maskbits field. The bug was based on the number of CPU cores in a system. Using the get_cpu_mask() function declared in kernel/cpu.c allows the driver to load on the community kernel 4.2 RC1. Below is the kernel bug reproduced: 8<-------------------------------------------------------------------- 2199382.828437 ( 0.005216)| lpfc 0003:02:00.0: enabling device (0140 -> 0142) 2199382.999272 ( 0.170835)| ------------[ cut here ]------------ 2199382.999337 ( 0.000065)| WARNING: CPU: 84 PID: 404 at mm/slab_common.c:653 kmalloc_slab+0x2f/0x89() 2199383.004534 ( 0.005197)| Modules linked in: lpfc(+) usbcore(+) mptctl scsi_transport_fc sg lpc_ich i2c_i801 usb_common tpm_tis mfd_core tpm acpi_cpufreq button scsi_dh_alua scsi_dh_rdacusbcore: registered new device driver usb 2199383.020568 ( 0.016034)| 2199383.020581 ( 0.000013)| scsi_dh_hp_sw scsi_dh_emc scsi_dh gru thermal sata_nv processor piix fan thermal_sysehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 2199383.035288 ( 0.014707)| 2199383.035306 ( 0.000018)| hwmon ata_piix 2199383.035336 ( 0.000030)| CPU: 84 PID: 404 Comm: kworker/84:0 Not tainted 3.18.0-rc2-gat-00106-ga7ca10f2-dirty #178 2199383.047077 ( 0.011741)| ehci-pci: EHCI PCI platform driver 2199383.047134 ( 0.000057)| Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 2199383.056245 ( 0.009111)| Workqueue: events work_for_cpu_fn 2199383.066174 ( 0.009929)| 000000000000028d ffff88eef827bbe8 ffffffff815a542f 000000000000028d 2199383.069545 ( 0.003371)| ffffffff810ea142 ffff88eef827bc28 ffffffff8104365c ffff88eefe4006c8 2199383.076214 ( 0.006669)| 0000000000000000 00000000000080d0 0000000000000000 0000000000000004 2199383.079213 ( 0.002999)| Call Trace: 2199383.084084 ( 0.004871)| [<ffffffff815a542f>] dump_stack+0x49/0x62 2199383.087283 ( 0.003199)| [<ffffffff810ea142>] ? kmalloc_slab+0x2f/0x89 2199383.091415 ( 0.004132)| [<ffffffff8104365c>] warn_slowpath_common+0x77/0x92 2199383.095197 ( 0.003782)| [<ffffffff8104368c>] warn_slowpath_null+0x15/0x17 2199383.103336 ( 0.008139)| [<ffffffff810ea142>] kmalloc_slab+0x2f/0x89 2199383.107082 ( 0.003746)| [<ffffffff8110fd9e>] __kmalloc+0x13/0x16a 2199383.112531 ( 0.005449)| [<ffffffffa01a8ed9>] lpfc_pci_probe_one_s4+0x105b/0x1644 [lpfc] 2199383.115316 ( 0.002785)| [<ffffffff81302b92>] ? pci_bus_read_config_dword+0x75/0x87 2199383.123431 ( 0.008115)| [<ffffffffa01a951f>] lpfc_pci_probe_one+0x5d/0xcb5 [lpfc] 2199383.127364 ( 0.003933)| [<ffffffff81497119>] ? dbs_check_cpu+0x168/0x177 2199383.136438 ( 0.009074)| [<ffffffff81496fa5>] ? gov_queue_work+0xb4/0xc0 2199383.140407 ( 0.003969)| [<ffffffff8130b2a1>] local_pci_probe+0x1e/0x52 2199383.143105 ( 0.002698)| [<ffffffff81052c47>] work_for_cpu_fn+0x13/0x1b 2199383.147315 ( 0.004210)| [<ffffffff81054965>] process_one_work+0x222/0x35e 2199383.151379 ( 0.004064)| [<ffffffff81054e76>] worker_thread+0x3d5/0x46e 2199383.159402 ( 0.008023)| [<ffffffff81054aa1>] ? process_one_work+0x35e/0x35e 2199383.163097 ( 0.003695)| [<ffffffff810599c6>] kthread+0xc8/0xd2 2199383.167476 ( 0.004379)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.176434 ( 0.008958)| [<ffffffff815a8cac>] ret_from_fork+0x7c/0xb0 2199383.180086 ( 0.003652)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.192333 ( 0.012247)| ehci-pci 0000:00:1a.0: EHCI Host Controller -------------------------------------------------------------------->8 The proposed solution was approved by James Smart at Emulex and tested on a UV2 machine with 6144 cores. With the fix, the LPFC module loads with no unwanted effects on the system. Signed-off-by:
Ian Mitchell <imitchell@sgi.com> Signed-off-by:
Alex Thorlton <athorlton@sgi.com> Suggested-by:
Robert Elliot <elliott@hp.com> [james.smart: resolve unused variable warning] Signed-off-by:
-
Johannes Thumshirn authored
Destroy lpfc_hba_index IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by:
-
