- 14 Jul, 2019 13 commits
-
-
Melissa Wen authored
[ Upstream commit df4d737e ] According to the AD7150 configuration register description, bit 7 assumes value 1 when the threshold mode is fixed and 0 when it is adaptive, however, the operation that identifies this mode was considering the opposite values. This patch renames the boolean variable to describe it correctly and properly replaces it in the places where it is used. Fixes: 531efd6a ("staging:iio:adc:ad7150: chan_spec conv + i2c_smbus commands + drop unused poweroff timeout control.") Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Srinivas Kandagatla authored
[ Upstream commit 03ecad90 ] Assigning local iterator to array element and using it again for indexing would cross the array boundary. Fix this by directly referring array element without using the local variable. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
John Fastabend authored
[ Upstream commit bd95e678 ] Backlog work for psock (sk_psock_backlog) might sleep while waiting for memory to free up when sending packets. However, while sleeping the socket may be closed and removed from the map by the user space side. This breaks an assumption in sk_stream_wait_memory, which expects the wait queue to be still there when it wakes up resulting in a use-after-free shown below. To fix his mark sendmsg as MSG_DONTWAIT to avoid the sleep altogether. We already set the flag for the sendpage case but we missed the case were sendmsg is used. Sockmap is currently the only user of skb_send_sock_locked() so only the sockmap paths should be impacted. ================================================================== BUG: KASAN: use-after-free in remove_wait_queue+0x31/0x70 Write of size 8 at addr ffff888069a0c4e8 by task kworker/0:2/110 CPU: 0 PID: 110 Comm: kworker/0:2 Not tainted 5.0.0-rc2-00335-g28f9d1a3-dirty #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 Workqueue: events sk_psock_backlog Call Trace: print_address_description+0x6e/0x2b0 ? remove_wait_queue+0x31/0x70 kasan_report+0xfd/0x177 ? remove_wait_queue+0x31/0x70 ? remove_wait_queue+0x31/0x70 remove_wait_queue+0x31/0x70 sk_stream_wait_memory+0x4dd/0x5f0 ? sk_stream_wait_close+0x1b0/0x1b0 ? wait_woken+0xc0/0xc0 ? tcp_current_mss+0xc5/0x110 tcp_sendmsg_locked+0x634/0x15d0 ? tcp_set_state+0x2e0/0x2e0 ? __kasan_slab_free+0x1d1/0x230 ? kmem_cache_free+0x70/0x140 ? sk_psock_backlog+0x40c/0x4b0 ? process_one_work+0x40b/0x660 ? worker_thread+0x82/0x680 ? kthread+0x1b9/0x1e0 ? ret_from_fork+0x1f/0x30 ? check_preempt_curr+0xaf/0x130 ? iov_iter_kvec+0x5f/0x70 ? kernel_sendmsg_locked+0xa0/0xe0 skb_send_sock_locked+0x273/0x3c0 ? skb_splice_bits+0x180/0x180 ? start_thread+0xe0/0xe0 ? update_min_vruntime.constprop.27+0x88/0xc0 sk_psock_backlog+0xb3/0x4b0 ? strscpy+0xbf/0x1e0 process_one_work+0x40b/0x660 worker_thread+0x82/0x680 ? process_one_work+0x660/0x660 kthread+0x1b9/0x1e0 ? __kthread_create_on_node+0x250/0x250 ret_from_fork+0x1f/0x30 Fixes: 20bf50de ("skbuff: Function to send an skbuf on a socket") Reported-by:
Jakub Sitnicki <jakub@cloudflare.com> Tested-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
John Crispin authored
[ Upstream commit 25d16d12 ] The reported rate is not scaled down correctly. After applying this patch, the function will behave just like the v/ht equivalents. Signed-off-by:
Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jakub Sitnicki authored
[ Upstream commit 186bcc3d ] Once psock gets unlinked from its sock (sk_psock_drop), user-space can still trigger a call to sk->sk_write_space by setting TCP_NOTSENT_LOWAT socket option. This causes a null-ptr-deref because we try to read psock->saved_write_space from sk_psock_write_space: ================================================================== BUG: KASAN: null-ptr-deref in sk_psock_write_space+0x69/0x80 Read of size 8 at addr 00000000000001a0 by task sockmap-echo/131 CPU: 0 PID: 131 Comm: sockmap-echo Not tainted 5.2.0-rc1-00094-gf49aa1de #81 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 Call Trace: ? sk_psock_write_space+0x69/0x80 __kasan_report.cold.2+0x5/0x3f ? sk_psock_write_space+0x69/0x80 kasan_report+0xe/0x20 sk_psock_write_space+0x69/0x80 tcp_setsockopt+0x69a/0xfc0 ? tcp_shutdown+0x70/0x70 ? fsnotify+0x5b0/0x5f0 ? remove_wait_queue+0x90/0x90 ? __fget_light+0xa5/0xf0 __sys_setsockopt+0xe6/0x180 ? sockfd_lookup_light+0xb0/0xb0 ? vfs_write+0x195/0x210 ? ksys_write+0xc9/0x150 ? __x64_sys_read+0x50/0x50 ? __bpf_trace_x86_fpu+0x10/0x10 __x64_sys_setsockopt+0x61/0x70 do_syscall_64+0xc5/0x520 ? vmacache_find+0xc0/0x110 ? syscall_return_slowpath+0x110/0x110 ? handle_mm_fault+0xb4/0x110 ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe ? trace_hardirqs_off_caller+0x4b/0x120 ? trace_hardirqs_off_thunk+0x1a/0x3a entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f2e5e7cdcce Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b1 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 36 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8a 11 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffed011b778 EFLAGS: 00000206 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2e5e7cdcce RDX: 0000000000000019 RSI: 0000000000000006 RDI: 0000000000000007 RBP: 00007ffed011b790 R08: 0000000000000004 R09: 00007f2e5e84ee80 R10: 00007ffed011b788 R11: 0000000000000206 R12: 00007ffed011b78c R13: 00007ffed011b788 R14: 0000000000000007 R15: 0000000000000068 ================================================================== Restore the saved sk_write_space callback when psock is being dropped to fix the crash. Signed-off-by:
-
Björn Töpel authored
[ Upstream commit fe121ee5 ] When using 32-bit subregisters (ALU32), the RISC-V JIT would not clear the high 32-bits of the target register and therefore generate incorrect code. E.g., in the following code: $ cat test.c unsigned int f(unsigned long long a, unsigned int b) { return (unsigned int)a & b; } $ clang-9 -target bpf -O2 -emit-llvm -S test.c -o - | \ llc-9 -mattr=+alu32 -mcpu=v3 .text .file "test.c" .globl f .p2align 3 .type f,@function f: r0 = r1 w0 &= w2 exit .Lfunc_end0: .size f, .Lfunc_end0-f The JIT would not clear the high 32-bits of r0 after the and-operation, which in this case might give an incorrect return value. After this patch, that is not the case, and the upper 32-bits are cleared. Reported-by:
Jiong Wang <jiong.wang@netronome.com> Fixes: 2353ecc6 ("bpf, riscv: add BPF JIT for RV64G") Signed-off-by:
Björn Töpel <bjorn.topel@gmail.com> Signed-off-by:
-
Matteo Croce authored
[ Upstream commit a195ceff ] GCC 9 fails to calculate the size of local constant strings and produces a false positive: samples/bpf/task_fd_query_user.c: In function ‘test_debug_fs_uprobe’: samples/bpf/task_fd_query_user.c:242:67: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 215 [-Wformat-truncation=] 242 | snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/%ss/%s/id", | ^~ 243 | event_type, event_alias); | ~~~~~~~~~~~ samples/bpf/task_fd_query_user.c:242:2: note: ‘snprintf’ output between 45 and 300 bytes into a destination of size 256 242 | snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/%ss/%s/id", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 243 | event_type, event_alias); | ~~~~~~~~~~~~~~~~~~~~~~~~ Workaround this by lowering the buffer size to a reasonable value. Related GCC Bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83431Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
Chang-Hsien Tsai authored
[ Upstream commit f7c2d64b ] If the trace for read is larger than 4096, the return value sz will be 4096. This results in off-by-one error on buf: static char buf[4096]; ssize_t sz; sz = read(trace_fd, buf, sizeof(buf)); if (sz > 0) { buf[sz] = 0; puts(buf); } Signed-off-by:
Chang-Hsien Tsai <luke.tw@gmail.com> Signed-off-by:
-
Aaron Ma authored
[ Upstream commit aa440de3 ] Adding 2 new touchpad PNPIDs to enable middle button support. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 6b23af07 ] The BIUCTRL register writes require that a data barrier be inserted after comitting the write to the register for the block to latch in the recently written values. Reads have no such requirement and are not changed. Fixes: 34642650 ("soc: Move brcmstb to bcm/brcmstb") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 490cad5a ] In case setup_hifcpubiuctrl_regs() returns an error, because of e.g: an unsupported CPU type, just catch that error and return instead of blindly continuing with the initialization. This fixes a NULL pointer de-reference with the code continuing without having a proper array of registers to use. Fixes: 22f7a911 ("soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs") Signed-off-by:
-
Christophe Leroy authored
commit a1a42f84 upstream. The talitos driver has two ways to perform AEAD depending on the HW capability. Some HW support both. It is needed to give them different names to distingish which one it is for instance when a test fails. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 7405c8d7 ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU") Cc: stable@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit 20a0f976 upstream. Commit c778f96b ("crypto: lrw - Optimize tweak computation") incorrectly reduced the alignmask of LRW instances from '__alignof__(u64) - 1' to '__alignof__(__be32) - 1'. However, xor_tweak() and setkey() assume that the data and key, respectively, are aligned to 'be128', which has u64 alignment. Fix the alignmask to be at least '__alignof__(be128) - 1'. Fixes: c778f96b ("crypto: lrw - Optimize tweak computation") Cc: <stable@vger.kernel.org> # v4.20+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
- 10 Jul, 2019 27 commits
-
-
Greg Kroah-Hartman authored
-
Roman Bolshakov authored
commit 5676234f upstream. WRITE SAME corrupts data on the block device behind iblock if the command is emulated. The emulation code issues (M - 1) * N times more bios than requested, where M is the number of 512 blocks per real block size and N is the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a device with 4k blocks, 7 * N more LBAs gets written after the requested range. The issue happens because the number of 512 byte sectors to be written is decreased one by one while the real bios are typically from 1 to 8 512 byte sectors per bio. Fixes: c66ac9db ("[SCSI] target: Add LIO target core v4.0.0-rc6") Cc: <stable@vger.kernel.org> Signed-off-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 75f2d86b upstream. CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser tables are vaguely sane. It was set to default to 'Y' for the moment to catch errors in upcoming fs conversion development. Make sure it is not enabled by default in the final release of v5.1. Fixes: 31d921c7 ("vfs: Add configuration parser helpers") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dan Carpenter authored
commit 4c89cc73 upstream. The "pending" variable was a u32 but we cast it to an unsigned long pointer when we do the for_each_set_bit() loop. The problem is that on big endian 64bit systems that results in an out of bounds read. Fixes: 4e4106f5 ("dmaengine: jz4780: Fix transfers being ACKed too soon") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Robin Gong authored
commit 3f93a4f2 upstream. It is possible for an irq triggered by channel0 to be received later after clks are disabled once firmware loaded during sdma probe. If that happens then clearing them by writing to SDMA_H_INTR won't work and the kernel will hang processing infinite interrupts. Actually, don't need interrupt triggered on channel0 since it's pollling SDMA_H_STATSTOP to know channel0 done rather than interrupt in current code, just clear BD_INTR to disable channel0 interrupt to avoid the above case. This issue was brought by commit 1d069bfa ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") which didn't take care the above case. Fixes: 1d069bfa ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") Cc: stable@vger.kernel.org #5.0+ Signed-off-by:
Robin Gong <yibin.gong@nxp.com> Reported-by:
Sven Van Asbroeck <thesven73@gmail.com> Tested-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
-
Sricharan R authored
commit f6034225 upstream. One space is left unused in circular FIFO to differentiate 'full' and 'empty' cases. So take that in to account while counting for the descriptors completed. Fixes the issue reported here, https://lkml.org/lkml/2019/6/18/669 Cc: stable@vger.kernel.org Reported-by:
Sricharan R <sricharan@codeaurora.org> Tested-by:
-
Cedric Hombourger authored
commit 637dfa0f upstream. scripts/package/builddeb calls "make dtbs_install" after executing a plain make (i.e. no build targets specified). It will fail if dtbs were not built beforehand. Match the arm64 architecture where DTBs get built by the "all" target. Signed-off-by:
Cedric Hombourger <Cedric_Hombourger@mentor.com> [paul.burton@mips.com: s/builddep/builddeb] Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
-
Dmitry Korotin authored
commit 0b24cae4 upstream. Add a missing EHB (Execution Hazard Barrier) in mtc0 -> mfc0 sequence. Without this execution hazard barrier it's possible for the value read back from the KScratch register to be the value from before the mtc0. Reproducible on P5600 & P6600. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register Signed-off-by:
Dmitry Korotin <dkorotin@wavecomp.com> [paul.burton@mips.com: - Commit message tweaks. - Add Fixes tags. - Mark for stable back to v3.15 where P5600 support was introduced.] Signed-off-by:
-
Hauke Mehrtens authored
commit d6ed083f upstream. The bounds check used the uninitialized variable vaddr, it should use the given parameter kaddr instead. When using the uninitialized value the compiler assumed it to be 0 and optimized this function to just return 0 in all cases. This should make the function check the range of the given address and only do the page map check in case it is in the expected range of virtual addresses. Fixes: 074a1e11 ("MIPS: Bounds check virt_addr_valid") Cc: stable@vger.kernel.org # v4.12+ Cc: Paul Burton <paul.burton@mips.com> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Chuck Lever authored
commit 1e091c3b upstream. The DRC appears to be effectively empty after an RPC/RDMA transport reconnect. The problem is that each connection uses a different source port, which defeats the DRC hash. Clients always have to disconnect before they send retransmissions to reset the connection's credit accounting, thus every retransmit on NFS/RDMA will miss the DRC. An NFS/RDMA client's IP source port is meaningless for RDMA transports. The transport layer typically sets the source port value on the connection to a random ephemeral port. The server already ignores it for the "secure port" check. See commit 16e4d93f ("NFSD: Ignore client's source port on RDMA transports"). The Linux NFS server's DRC resolves XID collisions from the same source IP address by using the checksum of the first 200 bytes of the RPC call header. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Paul Menzel authored
commit 3b2d4dcf upstream. Since commit 10a68cdf (nfsd: fix performance-limiting session calculation) (Linux 5.1-rc1 and 4.19.31), shares from NFS servers with 1 TB of memory cannot be mounted anymore. The mount just hangs on the client. The gist of commit 10a68cdf is the change below. -avail = clamp_t(int, avail, slotsize, avail/3); +avail = clamp_t(int, avail, slotsize, total_avail/3); Here are the macros. #define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <) #define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi) `total_avail` is 8,434,659,328 on the 1 TB machine. `clamp_t()` casts the values to `int`, which for 32-bit integers can only hold values −2,147,483,648 (−2^31) through 2,147,483,647 (2^31 − 1). `avail` (in the function signature) is just 65536, so that no overflow was happening. Before the commit the assignment would result in 21845, and `num = 4`. When using `total_avail`, it is causing the assignment to be 18446744072226137429 (printed as %lu), and `num` is then 4164608182. My next guess is, that `nfsd_drc_mem_used` is then exceeded, and the server thinks there is no memory available any more for this client. Updating the arguments of `clamp_t()` and `min_t()` to `unsigned long` fixes the issue. Now, `avail = 65536` (before commit 10a68cdf `avail = 21845`), but `num = 4` remains the same. Fixes: c54f24e3 (nfsd: fix performance-limiting session calculation) Cc: stable@vger.kernel.org Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Wanpeng Li authored
commit bb34e690 upstream. Thomas reported that: | Background: | | In preparation of supporting IPI shorthands I changed the CPU offline | code to software disable the local APIC instead of just masking it. | That's done by clearing the APIC_SPIV_APIC_ENABLED bit in the APIC_SPIV | register. | | Failure: | | When the CPU comes back online the startup code triggers occasionally | the warning in apic_pending_intr_clear(). That complains that the IRRs | are not empty. | | The offending vector is the local APIC timer vector who's IRR bit is set | and stays set. | | It took me quite some time to reproduce the issue locally, but now I can | see what happens. | | It requires apicv_enabled=0, i.e. full apic emulation. With apicv_enabled=1 | (and hardware support) it behaves correctly. | | Here is the series of events: | | Guest CPU | | goes down | | native_cpu_disable() | | apic_soft_disable(); | | play_dead() | | .... | | startup() | | if (apic_enabled()) | apic_pending_intr_clear() <- Not taken | | enable APIC | | apic_pending_intr_clear() <- Triggers warning because IRR is stale | | When this happens then the deadline timer or the regular APIC timer - | happens with both, has fired shortly before the APIC is disabled, but the | interrupt was not serviced because the guest CPU was in an interrupt | disabled region at that point. | | The state of the timer vector ISR/IRR bits: | | ISR IRR | before apic_soft_disable() 0 1 | after apic_soft_disable() 0 1 | | On startup 0 1 | | Now one would assume that the IRR is cleared after the INIT reset, but this | happens only on CPU0. | | Why? | | Because our CPU0 hotplug is just for testing to make sure nothing breaks | and goes through an NMI wakeup vehicle because INIT would send it through | the boots-trap code which is not really working if that CPU was not | physically unplugged. | | Now looking at a real world APIC the situation in that case is: | | ISR IRR | before apic_soft_disable() 0 1 | after apic_soft_disable() 0 1 | | On startup 0 0 | | Why? | | Once the dying CPU reenables interrupts the pending interrupt gets | delivered as a spurious interupt and then the state is clear. | | While that CPU0 hotplug test case is surely an esoteric issue, the APIC | emulation is still wrong, Even if the play_dead() code would not enable | interrupts then the pending IRR bit would turn into an ISR .. interrupt | when the APIC is reenabled on startup. From SDM 10.4.7.2 Local APIC State After It Has Been Software Disabled * Pending interrupts in the IRR and ISR registers are held and require masking or handling by the CPU. In Thomas's testing, hardware cpu will not respect soft disable LAPIC when IRR has already been set or APICv posted-interrupt is in flight, so we can skip soft disable APIC checking when clearing IRR and set ISR, continue to respect soft disable APIC when attempting to set IRR. Reported-by:
Rong Chen <rong.a.chen@intel.com> Reported-by:
Feng Tang <feng.tang@intel.com> Reported-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 3f16a5c3 upstream. This warning can be triggered easily by userspace, so it should certainly not cause a panic if panic_on_warn is set. Reported-by: syzbot+c03f30b4f4c46bdf8575@syzkaller.appspotmail.com Suggested-by:
Alexander Potapenko <glider@google.com> Acked-by:
-
Martin Schwidefsky authored
[ Upstream commit c9f62152 ] With git commit d1874a0c "s390/mm: make the pxd_offset functions more robust" and a 2-level page table it can now happen that pgd_bad() gets asked to verify a large segment table entry. If the entry is marked as dirty pgd_bad() will incorrectly return true. Change the pgd_bad(), p4d_bad(), pud_bad() and pmd_bad() functions to first verify the table type, return false if the table level is lower than what the function is suppossed to check, return true if the table level is too high, and otherwise check the relevant region and segment table bits. pmd_bad() has to check against ~SEGMENT_ENTRY_BITS for normal page table pointers or ~SEGMENT_ENTRY_BITS_LARGE for large segment table entries. Same for pud_bad() which has to check against ~_REGION_ENTRY_BITS or ~_REGION_ENTRY_BITS_LARGE. Fixes: d1874a0c ("s390/mm: make the pxd_offset functions more robust") Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Linus Torvalds authored
[ Upstream commit 423ea325 ] Make the forward declaration actually match the real function definition, something that previous versions of gcc had just ignored. This is another patch to fix new warnings from gcc-9 before I start the merge window pulls. I don't want to miss legitimate new warnings just because my system update brought a new compiler with new warnings. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Nikolay Borisov authored
commit debd1c06 upstream. Recent FITRIM work, namely bbbf7243 ("btrfs: combine device update operations during transaction commit") combined the way certain operations are recoded in a transaction. As a result an ASSERT was added in dev_replace_finish to ensure the new code works correctly. Unfortunately I got reports that it's possible to trigger the assert, meaning that during a device replace it's possible to have an unfinished chunk allocation on the source device. This is supposed to be prevented by the fact that a transaction is committed before finishing the replace oepration and alter acquiring the chunk mutex. This is not sufficient since by the time the transaction is committed and the chunk mutex acquired it's possible to allocate a chunk depending on the workload being executed on the replaced device. This bug has been present ever since device replace was introduced but there was never code which checks for it. The correct way to fix is to ensure that there is no pending device modification operation when the chunk mutex is acquire and if there is repeat transaction commit. Unfortunately it's not possible to just exclude the source device from btrfs_fs_devices::dev_alloc_list since this causes ENOSPC to be hit in transaction commit. Fixing that in another way would need to add special cases to handle the last writes and forbid new ones. The looped transaction fix is more obvious, and can be easily backported. The runtime of dev-replace is long so there's no noticeable delay caused by that. Reported-by:
David Sterba <dsterba@suse.com> Fixes: 391cd9df ("Btrfs: fix unprotected alloc list insertion during the finishing procedure of replace") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Shakeel Butt authored
commit dffcac2c upstream. In production we have noticed hard lockups on large machines running large jobs due to kswaps hoarding lru lock within isolate_lru_pages when sc->reclaim_idx is 0 which is a small zone. The lru was couple hundred GiBs and the condition (page_zonenum(page) > sc->reclaim_idx) in isolate_lru_pages() was basically skipping GiBs of pages while holding the LRU spinlock with interrupt disabled. On further inspection, it seems like there are two issues: (1) If kswapd on the return from balance_pgdat() could not sleep (i.e. node is still unbalanced), the classzone_idx is unintentionally set to 0 and the whole reclaim cycle of kswapd will try to reclaim only the lowest and smallest zone while traversing the whole memory. (2) Fundamentally isolate_lru_pages() is really bad when the allocation has woken kswapd for a smaller zone on a very large machine running very large jobs. It can hoard the LRU spinlock while skipping over 100s of GiBs of pages. This patch only fixes (1). (2) needs a more fundamental solution. To fix (1), in the kswapd context, if pgdat->kswapd_classzone_idx is invalid use the classzone_idx of the previous kswapd loop otherwise use the one the waker has requested. Link: http://lkml.kernel.org/r/20190701201847.251028-1-shakeelb@google.com Fixes: e716f2eb ("mm, vmscan: prevent kswapd sleeping prematurely due to mismatched classzone_idx") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Yang Shi <yang.shi@linux.alibaba.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hdanton@sina.com> Cc: Roman Gushchin <guro@fb.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Petr Mladek authored
commit d5b844a2 upstream. The commit 9f255b63 ("module: Fix livepatch/ftrace module text permissions race") causes a possible deadlock between register_kprobe() and ftrace_run_update_code() when ftrace is using stop_machine(). The existing dependency chain (in reverse order) is: -> #1 (text_mutex){+.+.}: validate_chain.isra.21+0xb32/0xd70 __lock_acquire+0x4b8/0x928 lock_acquire+0x102/0x230 __mutex_lock+0x88/0x908 mutex_lock_nested+0x32/0x40 register_kprobe+0x254/0x658 init_kprobes+0x11a/0x168 do_one_initcall+0x70/0x318 kernel_init_freeable+0x456/0x508 kernel_init+0x22/0x150 ret_from_fork+0x30/0x34 kernel_thread_starter+0x0/0xc -> #0 (cpu_hotplug_lock.rw_sem){++++}: check_prev_add+0x90c/0xde0 validate_chain.isra.21+0xb32/0xd70 __lock_acquire+0x4b8/0x928 lock_acquire+0x102/0x230 cpus_read_lock+0x62/0xd0 stop_machine+0x2e/0x60 arch_ftrace_update_code+0x2e/0x40 ftrace_run_update_code+0x40/0xa0 ftrace_startup+0xb2/0x168 register_ftrace_function+0x64/0x88 klp_patch_object+0x1a2/0x290 klp_enable_patch+0x554/0x980 do_one_initcall+0x70/0x318 do_init_module+0x6e/0x250 load_module+0x1782/0x1990 __s390x_sys_finit_module+0xaa/0xf0 system_call+0xd8/0x2d0 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(text_mutex); lock(cpu_hotplug_lock.rw_sem); lock(text_mutex); lock(cpu_hotplug_lock.rw_sem); It is similar problem that has been solved by the commit 2d1e38f5 ("kprobes: Cure hotplug lock ordering issues"). Many locks are involved. To be on the safe side, text_mutex must become a low level lock taken after cpu_hotplug_lock.rw_sem. This can't be achieved easily with the current ftrace design. For example, arm calls set_all_modules_text_rw() already in ftrace_arch_code_modify_prepare(), see arch/arm/kernel/ftrace.c. This functions is called: + outside stop_machine() from ftrace_run_update_code() + without stop_machine() from ftrace_module_enable() Fortunately, the problematic fix is needed only on x86_64. It is the only architecture that calls set_all_modules_text_rw() in ftrace path and supports livepatching at the same time. Therefore it is enough to move text_mutex handling from the generic kernel/trace/ftrace.c into arch/x86/kernel/ftrace.c: ftrace_arch_code_modify_prepare() ftrace_arch_code_modify_post_process() This patch basically reverts the ftrace part of the problematic commit 9f255b63 ("module: Fix livepatch/ftrace module text permissions race"). And provides x86_64 specific-fix. Some refactoring of the ftrace code will be needed when livepatching is implemented for arm or nds32. These architectures call set_all_modules_text_rw() and use stop_machine() at the same time. Link: http://lkml.kernel.org/r/20190627081334.12793-1-pmladek@suse.com Fixes: 9f255b63 ("module: Fix livepatch/ftrace module text permissions race") Acked-by:
Miroslav Benes <mbenes@suse.cz> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> [ As reviewed by Miroslav Benes <mbenes@suse.cz>, removed return value of ftrace_run_update_code() as it is a void function. ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Robert Beckett authored
commit 5aeab2bf upstream. The event will be sent as part of the vblank enable during the modeset if the crtc is not being kept disabled. Fixes: 5f2f9115 ("drm/imx: atomic phase 3 step 1: Use atomic configuration") Signed-off-by:
Robert Beckett <bob.beckett@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Robert Beckett authored
commit 78c68e8f upstream. Notify drm core before sending pending events during crtc disable. This fixes the first event after disable having an old stale timestamp by having drm_crtc_vblank_off update the timestamp to now. This was seen while debugging weston log message: Warning: computed repaint delay is insane: -8212 msec This occurred due to: 1. driver starts up 2. fbcon comes along and restores fbdev, enabling vblank 3. vblank_disable_fn fires via timer disabling vblank, keeping vblank seq number and time set at current value (some time later) 4. weston starts and does a modeset 5. atomic commit disables crtc while it does the modeset 6. ipu_crtc_atomic_disable sends vblank with old seq number and time Fixes: a4744786 ("drm/imx: fix crtc vblank state regression") Signed-off-by:
-
Lucas Stach authored
commit be132e13 upstream. When something goes wrong in the GPU init after the cmdbuf suballocator has been constructed, we fail to destroy it properly. This causes havok later when the GPU is unbound due to a module unload or similar. Fixes: e66774dd (drm/etnaviv: add cmdbuf suballocator) Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Gerd Hoffmann authored
commit 41de4be6 upstream. drm_connector_update_edid_property can sleep, we must not call it while holding a spinlock. Move the callsite. Fixes: b4b01b49 ("drm/virtio: add edid support") Reported-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Tested-by:
Cornelia Huck <cohuck@redhat.com> Acked-by:
-
Alex Deucher authored
commit 25f09f85 upstream. Recommended by the hw team. Reviewed-and-Tested-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Lyude Paul authored
commit 688f3d1e upstream. I'm not entirely sure why this is, but for some reason: 921935dc ("drm/amd/powerplay: enforce display related settings only on needed") Breaks runtime PM resume on the Radeon PRO WX 3100 (Lexa) in one the pre-production laptops I have. The issue manifests as the following messages in dmesg: [drm] UVD and UVD ENC initialized successfully. amdgpu 0000:3b:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vce1 test failed (-110) [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vce_v3_0> failed -110 [drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-110). And happens after about 6-10 runtime PM suspend/resume cycles (sometimes sooner, if you're lucky!). Unfortunately I can't seem to pin down precisely which part in psm_adjust_power_state_dynamic that is causing the issue, but not skipping the display setting setup seems to fix it. Hopefully if there is a better fix for this, this patch will spark discussion around it. Fixes: 921935dc ("drm/amd/powerplay: enforce display related settings only on needed") Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Rex Zhu <Rex.Zhu@amd.com> Cc: Likun Gao <Likun.Gao@amd.com> Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Evan Quan authored
commit f78c581e upstream. Otherwise, you may get divided-by-zero error or corrput the SMU fan control feature. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Slava Abramov <slava.abramov@amd.com> Acked-by:
-
Chris Wilson authored
commit c84c9029 upstream. Despite what I think the prm recommends, commit f2253bd9 ("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context") turned out to be a huge mistake when enabling Ironlake contexts as the GPU would hang on either a MI_FLUSH or PIPE_CONTROL immediately following the MI_SET_CONTEXT of an active mesa context (more vanilla contexts, e.g. simple rendercopies with igt, do not suffer). Ville found the following clue, "[DevCTG+]: For the invalidate operation of the pipe control, the following pointers are affected. The invalidate operation affects the restore of these packets. If the pipe control invalidate operation is completed before the context save, the indirect pointers will not be restored from memory. 1. Pipeline State Pointer 2. Media State Pointer 3. Constant Buffer Packet" which suggests by us emitting the INVALIDATE prior to the MI_SET_CONTEXT, we prevent the context-restore from chasing the dangling pointers within the image, and explains why this likely prevents the GPU hang. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419111749.3910-1-chris@chris-wilson.co.uk (cherry picked from commit 928f8f42 in drm-intel-next) Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111014 Fixes: f2253bd9 ("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context") Signed-off-by:
-
Ard Biesheuvel authored
commit 6f496a55 upstream. When KASLR and KASAN are both enabled, we keep the modules where they are, and randomize the placement of the kernel so it is within 2 GB of the module region. The reason for this is that putting modules in the vmalloc region (like we normally do when KASLR is enabled) is not possible in this case, given that the entire vmalloc region is already backed by KASAN zero shadow pages, and so allocating dedicated KASAN shadow space as required by loaded modules is not possible. The default module allocation window is set to [_etext - 128MB, _etext] in kaslr.c, which is appropriate for KASLR kernels booted without a seed or with 'nokaslr' on the command line. However, as it turns out, it is not quite correct for the KASAN case, since it still intersects the vmalloc region at the top, where attempts to allocate shadow pages will collide with the KASAN zero shadow pages, causing a WARN() and all kinds of other trouble. So cap the top end to MODULES_END explicitly when running with KASAN. Cc: <stable@vger.kernel.org> # 4.9+ Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
