Skip to content

L
linux
Switch branch/tag
  1. 08 Apr, 2017 13 commits
    • Hou Tao's avatar
      xfs: reset b_first_retry_time when clear the retry status of xfs_buf_t · 17c17805
      Hou Tao authored 
      commit 4dd2eb63 upstream.

After successful IO or permanent error, b_first_retry_time also
needs to be cleared, else the invalid first retry time will be
used by the next retry check.
Signed-off-by: default avatarHou Tao <houtao1@huawei.com>
Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      17c17805
    • Darrick J. Wong's avatar
      xfs: mark speculative prealloc CoW fork extents unwritten · b0f88f0d
      Darrick J. Wong authored 
      commit 5eda4300 upstream.

Christoph Hellwig pointed out that there's a potentially nasty race when
performing simultaneous nearby directio cow writes:

"Thread 1 writes a range from B to c

"                    B --------- C
                           p

"a little later thread 2 writes from A to B

"        A --------- B
               p

[editor's note: the 'p' denote cowextsize boundaries, which I added to
make this more clear]

"but the code preallocates beyond B into the range where thread
"1 has just written, but ->end_io hasn't been called yet.
"But once ->end_io is called thread 2 has already allocated
"up to the extent size hint into the write range of thread 1,
"so the end_io handler will splice the unintialized blocks from
"that preallocation back into the file right after B."

We can avoid this race by ensuring that thread 1 cannot accidentally
remap the blocks that thread 2 allocated (as part of speculative
preallocation) as part of t2's write preparation in t1's end_io handler.
The way we make this happen is by taking advantage of the unwritten
extent flag as an intermediate step.

Recall that when we begin the process of writing data to shared blocks,
we create a delayed allocation extent in the CoW fork:

D: --RRRRRRSSSRRRRRRRR---
C: ------DDDDDDD---------

When a thread prepares to CoW some dirty data out to disk, it will now
convert the delalloc reservation into an /unwritten/ allocated extent in
the cow fork.  The da conversion code tries to opportunistically
allocate as much of a (speculatively prealloc'd) extent as possible, so
we may end up allocating a larger extent than we're actually writing
out:

D: --RRRRRRSSSRRRRRRRR---
U: ------UUUUUUU---------

Next, we convert only the part of the extent that we're actively
planning to write to normal (i.e. not unwritten) status:

D: --RRRRRRSSSRRRRRRRR---
U: ------UURRUUU---------

If the write succeeds, the end_cow function will now scan the relevant
range of the CoW fork for real extents and remap only the real extents
into the data fork:

D: --RRRRRRRRSRRRRRRRR---
U: ------UU--UUU---------

This ensures that we never obliterate valid data fork extents with
unwritten blocks from the CoW fork.
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b0f88f0d
    • Darrick J. Wong's avatar
      xfs: allow unwritten extents in the CoW fork · a0c46fae
      Darrick J. Wong authored 
      commit 05a630d7 upstream.

In the data fork, we only allow extents to perform the following state
transitions:

delay -> real <-> unwritten

There's no way to move directly from a delalloc reservation to an
/unwritten/ allocated extent.  However, for the CoW fork we want to be
able to do the following to each extent:

delalloc -> unwritten -> written -> remapped to data fork

This will help us to avoid a race in the speculative CoW preallocation
code between a first thread that is allocating a CoW extent and a second
thread that is remapping part of a file after a write.  In order to do
this, however, we need two things: first, we have to be able to
transition from da to unwritten, and second the function that converts
between real and unwritten has to be made aware of the cow fork.  Do
both of those things.
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a0c46fae
    • Darrick J. Wong's avatar
      xfs: verify free block header fields · 1dc0e72c
      Darrick J. Wong authored 
      commit de14c5f5 upstream.

Perform basic sanity checking of the directory free block header
fields so that we avoid hanging the system on invalid data.

(Granted that just means that now we shutdown on directory write,
but that seems better than hanging...)
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1dc0e72c
    • Darrick J. Wong's avatar
      xfs: check for obviously bad level values in the bmbt root · 58565508
      Darrick J. Wong authored 
      commit b3bf607d upstream.

We can't handle a bmbt that's taller than BTREE_MAXLEVELS, and there's
no such thing as a zero-level bmbt (for that we have extents format),
so if we see this, send back an error code.
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      58565508
    • Darrick J. Wong's avatar
      xfs: filter out obviously bad btree pointers · 2b9dcb94
      Darrick J. Wong authored 
      commit d5a91bae upstream.

Don't let anybody load an obviously bad btree pointer.  Since the values
come from disk, we must return an error, not just ASSERT.
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: default avatarEric Sandeen <sandeen@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2b9dcb94
    • Darrick J. Wong's avatar
      xfs: fail _dir_open when readahead fails · cb308466
      Darrick J. Wong authored 
      commit 7a652bbe upstream.

When we open a directory, we try to readahead block 0 of the directory
on the assumption that we're going to need it soon.  If the bmbt is
corrupt, the directory will never be usable and the readahead fails
immediately, so we might as well prevent the directory from being opened
at all.  This prevents a subsequent read or modify operation from
hitting it and taking the fs offline.

NOTE: We're only checking for early failures in the block mapping, not
the readahead directory block itself.
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: default avatarEric Sandeen <sandeen@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cb308466
    • Darrick J. Wong's avatar
      xfs: fix toctou race when locking an inode to access the data map · 8059f061
      Darrick J. Wong authored 
      commit 4b5bd5bf upstream.

We use di_format and if_flags to decide whether we're grabbing the ilock
in btree mode (btree extents not loaded) or shared mode (anything else),
but the state of those fields can be changed by other threads that are
also trying to load the btree extents -- IFEXTENTS gets set before the
_bmap_read_extents call and cleared if it fails.

We don't actually need to have IFEXTENTS set until after the bmbt
records are successfully loaded and validated, which will fix the race
between multiple threads trying to read the same directory.  The next
patch strengthens directory bmbt validation by refusing to open the
directory if reading the bmbt to start directory readahead fails.
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8059f061
    • Brian Foster's avatar
      xfs: fix eofblocks race with file extending async dio writes · 02577091
      Brian Foster authored 
      commit e4229d6b upstream.

It's possible for post-eof blocks to end up being used for direct I/O
writes. dio write performs an upfront unwritten extent allocation, sends
the dio and then updates the inode size (if necessary) on write
completion. If a file release occurs while a file extending dio write is
in flight, it is possible to mistake the post-eof blocks for speculative
preallocation and incorrectly truncate them from the inode. This means
that the resulting dio write completion can discover a hole and allocate
new blocks rather than perform unwritten extent conversion.

This requires a strange mix of I/O and is thus not likely to reproduce
in real world workloads. It is intermittently reproduced by generic/299.
The error manifests as an assert failure due to transaction overrun
because the aforementioned write completion transaction has only
reserved enough blocks for btree operations:

  XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, \
   file: fs/xfs//xfs_trans.c, line: 309

The root cause is that xfs_free_eofblocks() uses i_size to truncate
post-eof blocks from the inode, but async, file extending direct writes
do not update i_size until write completion, long after inode locks are
dropped. Therefore, xfs_free_eofblocks() effectively truncates the inode
to the incorrect size.

Update xfs_free_eofblocks() to serialize against dio similar to how
extending writes are serialized against i_size updates before post-eof
block zeroing. Specifically, wait on dio while under the iolock. This
ensures that dio write completions have updated i_size before post-eof
blocks are processed.
Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      02577091
    • Brian Foster's avatar
      xfs: sync eofblocks scans under iolock are livelock prone · 696bfc8e
      Brian Foster authored 
      commit c3155097 upstream.

The xfs_eofblocks.eof_scan_owner field is an internal field to
facilitate invoking eofb scans from the kernel while under the iolock.
This is necessary because the eofb scan acquires the iolock of each
inode. Synchronous scans are invoked on certain buffered write failures
while under iolock. In such cases, the scan owner indicates that the
context for the scan already owns the particular iolock and prevents a
double lock deadlock.

eofblocks scans while under iolock are still livelock prone in the event
of multiple parallel scans, however. If multiple buffered writes to
different inodes fail and invoke eofblocks scans at the same time, each
scan avoids a deadlock with its own inode by virtue of the
eof_scan_owner field, but will never be able to acquire the iolock of
the inode from the parallel scan. Because the low free space scans are
invoked with SYNC_WAIT, the scan will not return until it has processed
every tagged inode and thus both scans will spin indefinitely on the
iolock being held across the opposite scan. This problem can be
reproduced reliably by generic/224 on systems with higher cpu counts
(x16).

To avoid this problem, simplify the semantics of eofblocks scans to
never invoke a scan while under iolock. This means that the buffered
write context must drop the iolock before the scan. It must reacquire
the lock before the write retry and also repeat the initial write
checks, as the original state might no longer be valid once the iolock
was dropped.
Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      696bfc8e
    • Brian Foster's avatar
      xfs: pull up iolock from xfs_free_eofblocks() · ff4ea420
      Brian Foster authored 
      commit a36b9261 upstream.

xfs_free_eofblocks() requires the IOLOCK_EXCL lock, but is called from
different contexts where the lock may or may not be held. The
need_iolock parameter exists for this reason, to indicate whether
xfs_free_eofblocks() must acquire the iolock itself before it can
proceed.

This is ugly and confusing. Simplify the semantics of
xfs_free_eofblocks() to require the caller to acquire the iolock
appropriately and kill the need_iolock parameter. While here, the mp
param can be removed as well as the xfs_mount is accessible from the
xfs_inode structure. This patch does not change behavior.
Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ff4ea420
    • Ladi Prosek's avatar
      KVM: nVMX: fix nested EPT detection · 3eb24329
      Ladi Prosek authored 
      commit 7ad658b6 upstream.

The nested_ept_enabled flag introduced in commit 7ca29de2 was not
computed correctly. We are interested only in L1's EPT state, not the
the combined L0+L1 value.

In particular, if L0 uses EPT but L1 does not, nested_ept_enabled must
be false to make sure that PDPSTRs are loaded based on CR3 as usual,
because the special case described in 26.3.2.4 Loading Page-Directory-
Pointer-Table Entries does not apply.

Fixes: 7ca29de2 ("KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT")
Cc: qemu-stable@nongnu.org
Reported-by: default avatarWanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: default avatarDavid Hildenbrand <david@redhat.com>
Signed-off-by: default avatarLadi Prosek <lprosek@redhat.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3eb24329
    • Ilya Dryomov's avatar
      libceph: force GFP_NOIO for socket allocations · 8a7eb087
      Ilya Dryomov authored 
      commit 633ee407 upstream.

sock_alloc_inode() allocates socket+inode and socket_wq with
GFP_KERNEL, which is not allowed on the writeback path:

    Workqueue: ceph-msgr con_work [libceph]
    ffff8810871cb018 0000000000000046 0000000000000000 ffff881085d40000
    0000000000012b00 ffff881025cad428 ffff8810871cbfd8 0000000000012b00
    ffff880102fc1000 ffff881085d40000 ffff8810871cb038 ffff8810871cb148
    Call Trace:
    [<ffffffff816dd629>] schedule+0x29/0x70
    [<ffffffff816e066d>] schedule_timeout+0x1bd/0x200
    [<ffffffff81093ffc>] ? ttwu_do_wakeup+0x2c/0x120
    [<ffffffff81094266>] ? ttwu_do_activate.constprop.135+0x66/0x70
    [<ffffffff816deb5f>] wait_for_completion+0xbf/0x180
    [<ffffffff81097cd0>] ? try_to_wake_up+0x390/0x390
    [<ffffffff81086335>] flush_work+0x165/0x250
    [<ffffffff81082940>] ? worker_detach_from_pool+0xd0/0xd0
    [<ffffffffa03b65b1>] xlog_cil_force_lsn+0x81/0x200 [xfs]
    [<ffffffff816d6b42>] ? __slab_free+0xee/0x234
    [<ffffffffa03b4b1d>] _xfs_log_force_lsn+0x4d/0x2c0 [xfs]
    [<ffffffff811adc1e>] ? lookup_page_cgroup_used+0xe/0x30
    [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs]
    [<ffffffffa03b4dcf>] xfs_log_force_lsn+0x3f/0xf0 [xfs]
    [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs]
    [<ffffffffa03a62c6>] xfs_iunpin_wait+0xc6/0x1a0 [xfs]
    [<ffffffff810aa250>] ? wake_atomic_t_function+0x40/0x40
    [<ffffffffa039a723>] xfs_reclaim_inode+0xa3/0x330 [xfs]
    [<ffffffffa039ac07>] xfs_reclaim_inodes_ag+0x257/0x3d0 [xfs]
    [<ffffffffa039bb13>] xfs_reclaim_inodes_nr+0x33/0x40 [xfs]
    [<ffffffffa03ab745>] xfs_fs_free_cached_objects+0x15/0x20 [xfs]
    [<ffffffff811c0c18>] super_cache_scan+0x178/0x180
    [<ffffffff8115912e>] shrink_slab_node+0x14e/0x340
    [<ffffffff811afc3b>] ? mem_cgroup_iter+0x16b/0x450
    [<ffffffff8115af70>] shrink_slab+0x100/0x140
    [<ffffffff8115e425>] do_try_to_free_pages+0x335/0x490
    [<ffffffff8115e7f9>] try_to_free_pages+0xb9/0x1f0
    [<ffffffff816d56e4>] ? __alloc_pages_direct_compact+0x69/0x1be
    [<ffffffff81150cba>] __alloc_pages_nodemask+0x69a/0xb40
    [<ffffffff8119743e>] alloc_pages_current+0x9e/0x110
    [<ffffffff811a0ac5>] new_slab+0x2c5/0x390
    [<ffffffff816d71c4>] __slab_alloc+0x33b/0x459
    [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0
    [<ffffffff8164bda1>] ? inet_sendmsg+0x71/0xc0
    [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0
    [<ffffffff811a21f2>] kmem_cache_alloc+0x1a2/0x1b0
    [<ffffffff815b906d>] sock_alloc_inode+0x2d/0xd0
    [<ffffffff811d8566>] alloc_inode+0x26/0xa0
    [<ffffffff811da04a>] new_inode_pseudo+0x1a/0x70
    [<ffffffff815b933e>] sock_alloc+0x1e/0x80
    [<ffffffff815ba855>] __sock_create+0x95/0x220
    [<ffffffff815baa04>] sock_create_kern+0x24/0x30
    [<ffffffffa04794d9>] con_work+0xef9/0x2050 [libceph]
    [<ffffffffa04aa9ec>] ? rbd_img_request_submit+0x4c/0x60 [rbd]
    [<ffffffff81084c19>] process_one_work+0x159/0x4f0
    [<ffffffff8108561b>] worker_thread+0x11b/0x530
    [<ffffffff81085500>] ? create_worker+0x1d0/0x1d0
    [<ffffffff8108b6f9>] kthread+0xc9/0xe0
    [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90
    [<ffffffff816e1b98>] ret_from_fork+0x58/0x90
    [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90

Use memalloc_noio_{save,restore}() to temporarily force GFP_NOIO here.

Link: http://tracker.ceph.com/issues/19309Reported-by: default avatarSergey Jerusalimov <wintchester@gmail.com>
Signed-off-by: default avatarIlya Dryomov <idryomov@gmail.com>
Reviewed-by: default avatarJeff Layton <jlayton@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8a7eb087
  3. 31 Mar, 2017 18 commits
  5. 30 Mar, 2017 9 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.10.7 · 55db23d3
      Greg Kroah-Hartman authored
      55db23d3
    • Jiri Slaby's avatar
      crypto: algif_hash - avoid zero-sized array · 0dad3de8
      Jiri Slaby authored 
      commit 62071194 upstream.

With this reproducer:
  struct sockaddr_alg alg = {
          .salg_family = 0x26,
          .salg_type = "hash",
          .salg_feat = 0xf,
          .salg_mask = 0x5,
          .salg_name = "digest_null",
  };
  int sock, sock2;

  sock = socket(AF_ALG, SOCK_SEQPACKET, 0);
  bind(sock, (struct sockaddr *)&alg, sizeof(alg));
  sock2 = accept(sock, NULL, NULL);
  setsockopt(sock, SOL_ALG, ALG_SET_KEY, "\x9b\xca", 2);
  accept(sock2, NULL, NULL);

==== 8< ======== 8< ======== 8< ======== 8< ====

one can immediatelly see an UBSAN warning:
UBSAN: Undefined behaviour in crypto/algif_hash.c:187:7
variable length array bound value 0 <= 0
CPU: 0 PID: 15949 Comm: syz-executor Tainted: G            E      4.4.30-0-default #1
...
Call Trace:
...
 [<ffffffff81d598fd>] ? __ubsan_handle_vla_bound_not_positive+0x13d/0x188
 [<ffffffff81d597c0>] ? __ubsan_handle_out_of_bounds+0x1bc/0x1bc
 [<ffffffffa0e2204d>] ? hash_accept+0x5bd/0x7d0 [algif_hash]
 [<ffffffffa0e2293f>] ? hash_accept_nokey+0x3f/0x51 [algif_hash]
 [<ffffffffa0e206b0>] ? hash_accept_parent_nokey+0x4a0/0x4a0 [algif_hash]
 [<ffffffff8235c42b>] ? SyS_accept+0x2b/0x40

It is a correct warning, as hash state is propagated to accept as zero,
but creating a zero-length variable array is not allowed in C.

Fix this as proposed by Herbert -- do "?: 1" on that site. No sizeof or
similar happens in the code there, so we just allocate one byte even
though we do not use the array.
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net> (maintainer:CRYPTO API)
Reported-by: default avatarSasha Levin <sasha.levin@oracle.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0dad3de8
    • Takashi Iwai's avatar
      fbcon: Fix vc attr at deinit · f9955dca
      Takashi Iwai authored 
      commit 8aac7f34 upstream.

fbcon can deal with vc_hi_font_mask (the upper 256 chars) and adjust
the vc attrs dynamically when vc_hi_font_mask is changed at
fbcon_init().  When the vc_hi_font_mask is set, it remaps the attrs in
the existing console buffer with one bit shift up (for 9 bits), while
it remaps with one bit shift down (for 8 bits) when the value is
cleared.  It works fine as long as the font gets updated after fbcon
was initialized.

However, we hit a bizarre problem when the console is switched to
another fb driver (typically from vesafb or efifb to drmfb).  At
switching to the new fb driver, we temporarily rebind the console to
the dummy console, then rebind to the new driver.  During the
switching, we leave the modified attrs as is.  Thus, the new fbcon
takes over the old buffer as if it were to contain 8 bits chars
(although the attrs are still shifted for 9 bits), and effectively
this results in the yellow color texts instead of the original white
color, as found in the bugzilla entry below.

An easy fix for this is to re-adjust the attrs before leaving the
fbcon at con_deinit callback.  Since the code to adjust the attrs is
already present in the current fbcon code, in this patch, we simply
factor out the relevant code, and call it from fbcon_deinit().

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000619Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f9955dca
    • Daniel Vetter's avatar
      drm: reference count event->completion · 2a324104
      Daniel Vetter authored 
      commit 24835e44 upstream.

When writing the generic nonblocking commit code I assumed that
through clever lifetime management I can assure that the completion
(stored in drm_crtc_commit) only gets freed after it is completed. And
that worked.

I also wanted to make nonblocking helpers resilient against driver
bugs, by having timeouts everywhere. And that worked too.

Unfortunately taking boths things together results in oopses :( Well,
at least sometimes: What seems to happen is that the drm event hangs
around forever stuck in limbo land. The nonblocking helpers eventually
time out, move on and release it. Now the bug I tested all this
against is drivers that just entirely fail to deliver the vblank
events like they should, and in those cases the event is simply
leaked. But what seems to happen, at least sometimes, on i915 is that
the event is set up correctly, but somohow the vblank fails to fire in
time. Which means the event isn't leaked, it's still there waiting for
eventually a vblank to fire. That tends to happen when re-enabling the
pipe, and then the trap springs and the kernel oopses.

The correct fix here is simply to refcount the crtc commit to make
sure that the event sticks around even for drivers which only
sometimes fail to deliver vblanks for some arbitrary reasons. Since
crtc commits are already refcounted that's easy to do.

References: https://bugs.freedesktop.org/show_bug.cgi?id=96781
Cc: Jim Rees <rees@umich.edu>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: default avatarMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161221102331.31033-1-daniel.vetter@ffwll.ch
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2a324104
    • Dan Streetman's avatar
      xen: do not re-use pirq number cached in pci device msi msg data · 59758483
      Dan Streetman authored 
      commit c74fd80f upstream.

Revert the main part of commit:
af42b8d1 ("xen: fix MSI setup and teardown for PV on HVM guests")

That commit introduced reading the pci device's msi message data to see
if a pirq was previously configured for the device's msi/msix, and re-use
that pirq.  At the time, that was the correct behavior.  However, a
later change to Qemu caused it to call into the Xen hypervisor to unmap
all pirqs for a pci device, when the pci device disables its MSI/MSIX
vectors; specifically the Qemu commit:
c976437c7dba9c7444fb41df45468968aaa326ad
("qemu-xen: free all the pirqs for msi/msix when driver unload")

Once Qemu added this pirq unmapping, it was no longer correct for the
kernel to re-use the pirq number cached in the pci device msi message
data.  All Qemu releases since 2.1.0 contain the patch that unmaps the
pirqs when the pci device disables its MSI/MSIX vectors.

This bug is causing failures to initialize multiple NVMe controllers
under Xen, because the NVMe driver sets up a single MSIX vector for
each controller (concurrently), and then after using that to talk to
the controller for some configuration data, it disables the single MSIX
vector and re-configures all the MSIX vectors it needs.  So the MSIX
setup code tries to re-use the cached pirq from the first vector
for each controller, but the hypervisor has already given away that
pirq to another controller, and its initialization fails.

This is discussed in more detail at:
https://lists.xen.org/archives/html/xen-devel/2017-01/msg00447.html

Fixes: af42b8d1 ("xen: fix MSI setup and teardown for PV on HVM guests")
Signed-off-by: default avatarDan Streetman <dan.streetman@canonical.com>
Reviewed-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Acked-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      59758483
    • Vaidyanathan Srinivasan's avatar
      cpuidle: Validate cpu_dev in cpuidle_add_sysfs() · 53569305
      Vaidyanathan Srinivasan authored 
      commit ad0a45fd upstream.

If a given cpu is not in cpu_present and cpu hotplug
is disabled, arch can skip setting up the cpu_dev.

Arch cpuidle driver should pass correct cpu mask
for registration, but failing to do so by the driver
causes error to propagate and crash like this:

[   30.076045] Unable to handle kernel paging request for data at address 0x00000048
[   30.076100] Faulting instruction address: 0xc0000000007b2f30
cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
    pc: c0000000007b2f30: kobject_get+0x20/0x70
    lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
    sp: c000003feb18b8f0
   msr: 9000000000009033
   dar: 48
 dsisr: 40000000
  current = 0xc000003fd2ed8300
  paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/0
Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
enter ? for help
[c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
[c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
[c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
[c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
[c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
[c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
[c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
[c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
[c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
[c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74

Validating cpu_dev fixes the crash and reports correct error message like:

[   30.163506] Failed to register cpuidle device for cpu136
[   30.173329] Registration of powernv driver failed.
Signed-off-by: default avatarVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
[ rjw: Comment massage ]
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      53569305
    • Damien Le Moal's avatar
      scsi: sd: Check for unaligned partial completion · a27142e6
      Damien Le Moal authored 
      commit c46f0917 upstream.

Commit <f2e767bb> ("mpt3sas: Force request partial completion
alignment") was not considering the case of commands not operating on
logical block size units (e.g. REQ_OP_ZONE_REPORT and its 64B aligned
partial replies). In this case, forcing alignment of resid to the device
logical block size can break the command result, e.g. in the case of
REQ_OP_ZONE_REPORT, the exact number of zone reported by the device.

Move the partial completion alignement check of mpt3sas to a generic
implementation in sd_done(). The check is added within the default
section of the initial req_op() switch case so that the report and reset
zone commands are ignored. In addition, as sd_done() is not called for
passthrough requests, resid corrections are not done as intended by the
initial mpt3sas patch.

Fixes: f2e767bb ("mpt3sas: Force request partial completion alignment")
Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
Acked-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a27142e6
    • Dave Jiang's avatar
      device-dax: fix pmd/pte fault fallback handling · 66c08128
      Dave Jiang authored 
      commit 0134ed4f upstream.

Jeff Moyer reports:

    With a device dax alignment of 4KB or 2MB, I get sigbus when running
    the attached fio job file for the current kernel (4.11.0-rc1+).  If
    I specify an alignment of 1GB, it works.

    I turned on debug output, and saw that it was failing in the huge
    fault code.

     dax dax1.0: dax_open
     dax dax1.0: dax_mmap
     dax dax1.0: dax_dev_huge_fault: fio: write (0x7f08f0a00000 -
     dax dax1.0: __dax_dev_pud_fault: phys_to_pgoff(0xffffffffcf60
     dax dax1.0: dax_release

    fio config for reproduce:
    [global]
    ioengine=dev-dax
    direct=0
    filename=/dev/dax0.0
    bs=2m

    [write]
    rw=write

    [read]
    stonewall
    rw=read

The driver fails to fallback when taking a fault that is larger than
the device alignment, or handling a larger fault when a smaller
mapping is already established. While we could support larger
mappings for a device with a smaller alignment, that change is
too large for the immediate fix. The simplest change is to force
fallback until the fault size matches the alignment.

Fixes: dee41079 ("/dev/dax, core: file operations and dax-mmap")
Cc: <stable@vger.kernel.org>
Reported-by: default avatarJeff Moyer <jmoyer@redhat.com>
Signed-off-by: default avatarDave Jiang <dave.jiang@intel.com>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      66c08128
    • Ilya Dryomov's avatar
      libceph: don't set weight to IN when OSD is destroyed · 96aa12df
      Ilya Dryomov authored 
      commit b581a585 upstream.

Since ceph.git commit 4e28f9e63644 ("osd/OSDMap: clear osd_info,
osd_xinfo on osd deletion"), weight is set to IN when OSD is deleted.
This changes the result of applying an incremental for clients, not
just OSDs.  Because CRUSH computations are obviously affected,
pre-4e28f9e63644 servers disagree with post-4e28f9e63644 clients on
object placement, resulting in misdirected requests.

Mirrors ceph.git commit a6009d1039a55e2c77f431662b3d6cc5a8e8e63f.

Fixes: 930c5328 ("libceph: apply new_state before new_up_client on incrementals")
Link: http://tracker.ceph.com/issues/19122Signed-off-by: default avatarIlya Dryomov <idryomov@gmail.com>
Reviewed-by: default avatarSage Weil <sage@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      96aa12df
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7