This eliminates the need to scan every bucket to regenerate dev_usage at
mount time.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Originally, bcachefs - going back to bcache - stored, for each bucket, a
16 bit counter corresponding to how long it had been since the bucket
was read from. But, this required periodically rescaling counters on
every bucket to avoid wraparound. That wasn't an issue in bcache, where
we'd perodically rewrite the per bucket metadata all at once, but in
bcachefs we're trying to avoid having to walk every single bucket.

This patch switches to persisting 64 bit io clocks, corresponding to the
64 bit bucket timestaps introduced in the previous patch with
KEY_TYPE_alloc_v2.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This introduces a new version of KEY_TYPE_alloc, which uses the new
varint encoding introduced for inodes. This means we'll eventually be
able to support much larger bucket sizes (for SMR devices), and the
read/write time fields are expanded to 64 bits - which will be used in
the next patch to get rid of the periodic rescaling of those fields.

Also, for buckets that are members of erasure coded stripes, this adds
persistent fields for the index of the stripe they're members of and the
stripe redundancy. This is part of work to get rid of having to scan and
read into memory the alloc and stripes btrees at mount time.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a bug introduced by "bcachefs: Improve diagnostics when
journal entries are missing" - devices in a replicas entry are supposed
to be sorted.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Also, make journal writes obey foreground_target and metadata_target.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Now that we can repair metadata during GC, we can handle bad pointers
that would trigger errors being marked, when they need to just be
dropped.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When we walk the btrees during recovery, part of that is checking that
btree topology is correct: for every interior btree node, its child
nodes should exactly span the range the parent node covers.

Previously, we had checks for this, but not repair code. Now that we
have the ability to do btree updates during initial GC, this patch adds
that repair code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Some errors may need to be fixed in order for GC to successfully run -
walk and mark all metadata. But we can't start the allocators and do
normal btree updates until after GC has completed, and allocation
information is known to be consistent, so we need a different method of
doing btree updates.

Fortunately, we already have code for walking the btree while overlaying
keys from the journal to be replayed. This patch adds an update path
that adds keys to the list of keys to be replayed by journal replay, and
also fixes up iterators.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is so that when we discover btree topology issues, we can just
update the pointer to a btree node and signal btree read path that the
min/max keys in the node header should be updated from the node pointer.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Still a lot of work to be done here: we can't yet repair btree topology
issues, but this patch refactors things so that we have better access to
what we need in the topology checks. Next up will be figuring out a way
to do btree updates during gc, before journal replay is done.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

There's an outstanding bug with journal entries being missing in journal
replay. This patch adds code to print out where the journal entries were
physically located that were around the entry(ies) being missing, which
should make debugging easier.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Ideally, this limit will be going away in the future.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The userspace bch_err() macro doesn't use the filesystem argument. Could
also be fixed with a better macro.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

If we're invalidating a bucket that has cached data in it, data_type
won't be 0 - oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

More work towards getting rid of the in memory struct bucket: this path
adds code for marking superblock and journal buckets via the btree, and
uses it in the device add and journal resize paths.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This patch is working towards eventually getting rid of the in memory
struct bucket, and relying only on the btree representation.

Since bch2_invalidate_bucket() was only used for incrementing gens, not
invalidating cached data, no other counters were being changed as a side
effect - meaning it's safe for the allocator code to increment the
bucket gen directly.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is to make it more amenable for serialization.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This was useful before we had transactional updates to interior btree
nodes - but now, it's just extra unneeded complexity.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This was leading to a very strange bug in bch2_bucket_io_time_reset(),
where we'd retry without clearing out the list of updates.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

If journal replay hasn't finished, the journal can't be empty - oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We're transitioning to memalloc_nofs_save/restore instead of GFP flags
with the rest of the kernel, and GFP_NOIO was excessively strict and
causing unnnecessary allocation failures - these allocations are done
with btree locks dropped.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We had a deadlock on page_lock, because buffered reads signal completion
by unlocking the page, but the dio read path normally dirties the pages
it's reading to with set_page_dirty_lock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It was using an internal btree node iterator interface, when
bch2_btree_iter_peek_slot() sufficed. We were hitting a null ptr deref
that looked like it was from the iterator not being uptodate - this will
also fix that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

There was a race: btree node writes drop their reference on journal pins
before clearing the btree_node_write_in_flight flag.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In the future, stripe index 0 will be a sentinal value. This patch
doesn't disallow stripes at POS_MIN yet, leaving that for when we do the
on disk format changes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Allocating buckets for existing stripes was busted, in part because the
data structures were too contorted. This reworks new stripes so that we
have an array of open buckets that matches blocks in the stripe, and
it's sparse if we're reusing an existing stripe.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

A user reported a bug that implies they might not be correctly sorted,
this should help track that down.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This makes bch2_stripes_write() work more like bch2_alloc_write().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The primary stripes radix tree can be sparse, which was causing an
assertion to pop because the one use for gc isn't. Fix this by changing
the algorithm to copy between the two radix trees.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The sectors argument shouldn't have been a u32 - it can be up to U32_MAX
(i.e. fallocate creating persistent reservations), and if replication is
enabled we'll overflow when we calculate the real number of sectors to
reserve. Oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

All writes prior to a journal write need to be flushed before the
journal write itself happens. On single device filesystems, it suffices
to mark the write with REQ_PREFLUSH|REQ_FUA, but on multi device
filesystems we need to issue flushes to every device - and wait for them
to complete - before issuing the journal writes. Previously, we were
issuing flushes to every device, but we weren't waiting for them to
complete before issuing the journal writes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is because we had a bug where we were writing out journal entries
with garbage last_seq, and not catching it.

Also, completely ignore jset->last_seq when JSET_NO_FLUSH is true,
because of aforementioned bug, but change the write path to set last_seq
to 0 when JSET_NO_FLUSH is true.

Minor other cleanups and comments.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a bug where mark and sweep gc incorrectly was clearing out
the stripes heap and causing assertions to fire later - simpler to just
create the stripes heap after gc has finished.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_btree_and_journal_walk() walks the btree overlaying keys from the
journal; it was introduced so that we could read in the alloc btree
prior to journal replay being done, when journalling of updates to
interior btree nodes was introduced.

But it didn't have btree node prefetching, which introduced a severe
regression with mount times, particularly on spinning rust. This patch
implements btree node prefetching for the btree + journal walk,
hopefully fixing that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

 - Originally bch_extent_stripe_ptr didn't contain the block index,
   instead we'd have to search through the stripe pointers to figure out
   which pointer matched. When the block field was added to
   bch_extent_stripe_ptr, not all of the code was updated to use it.
   This patch fixes that, and we also now verify that field where it
   makes sense.

 - The ec_stripe_buf_init/exit() functions have been improved, and are
   now used by the bch2_ec_read_extent() (recovery read) path.

 - get_stripe_key() is now used by bch2_ec_read_extent().

 - We now have a getter and setter for checksums within a stripe, like
   we had previously for block sector counts, and ec_generate_checksums
   and ec_validate_checksums are now quite a bit smaller and cleaner.

ec.c still needs a lot of work, but this patch is slowly moving things
in the right direction.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

More debugging info is always a good thing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>