Skip to content

L
linux
Switch branch/tag
  1. 16 Oct, 2024 3 commits
    • Peter Rashleigh's avatar
      net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361 · 1833d8a2
      Peter Rashleigh authored 
      According to the Marvell datasheet the 88E6361 has two VTU pages
(4k VIDs per page) so the max_vid should be 8191, not 4095.

In the current implementation mv88e6xxx_vtu_walk() gives unexpected
results because of this error. I verified that mv88e6xxx_vtu_walk()
works correctly on the MV88E6361 with this patch in place.

Fixes: 12899f29 ("net: dsa: mv88e6xxx: enable support for 88E6361 switch")
Signed-off-by: default avatarPeter Rashleigh <peter@rashleigh.ca>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241014204342.5852-1-peter@rashleigh.caSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1833d8a2
    • Kuniyuki Iwashima's avatar
      tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink(). · e8c526f2
      Kuniyuki Iwashima authored 
      Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().

  """
  We are seeing a use-after-free from a bpf prog attached to
  trace_tcp_retransmit_synack. The program passes the req->sk to the
  bpf_sk_storage_get_tracing kernel helper which does check for null
  before using it.
  """

The commit 83fccfc3 ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.

Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.

If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.

The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.

The scenario would be

  1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
     but del_timer_sync() is missed

  2. reqsk timer is executed and scheduled again

  3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
     reqsk timer still has another one, and inet_csk_accept() does not
     clear req->sk for non-TFO sockets

  4. sk is close()d

  5. reqsk timer is executed again, and BPF touches req->sk

Let's not use timer_pending() by passing the caller context to
__inet_csk_reqsk_queue_drop().

Note that reqsk timer is pinned, so the issue does not happen in most
use cases. [1]

[0]
BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0

Use-after-free read at 0x00000000a891fb3a (in kfence-#1):
bpf_sk_storage_get_tracing+0x2e/0x1b0
bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda
bpf_trace_run2+0x4c/0xc0
tcp_rtx_synack+0xf9/0x100
reqsk_timer_handler+0xda/0x3d0
run_timer_softirq+0x292/0x8a0
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
intel_idle_irq+0x5a/0xa0
cpuidle_enter_state+0x94/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb

kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6

allocated by task 0 on cpu 9 at 260507.901592s:
sk_prot_alloc+0x35/0x140
sk_clone_lock+0x1f/0x3f0
inet_csk_clone_lock+0x15/0x160
tcp_create_openreq_child+0x1f/0x410
tcp_v6_syn_recv_sock+0x1da/0x700
tcp_check_req+0x1fb/0x510
tcp_v6_rcv+0x98b/0x1420
ipv6_list_rcv+0x2258/0x26e0
napi_complete_done+0x5b1/0x2990
mlx5e_napi_poll+0x2ae/0x8d0
net_rx_action+0x13e/0x590
irq_exit_rcu+0xf5/0x320
common_interrupt+0x80/0x90
asm_common_interrupt+0x22/0x40
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb

freed by task 0 on cpu 9 at 260507.927527s:
rcu_core_si+0x4ff/0xf10
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb

Fixes: 83fccfc3 ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: default avatarMartin KaFai Lau <martin.lau@kernel.org>
Closes: https://lore.kernel.org/netdev/eb6684d0-ffd9-4bdc-9196-33f690c25824@linux.dev/
Link: https://lore.kernel.org/netdev/b55e2ca0-42f2-4b7c-b445-6ffd87ca74a0@linux.dev/ [1]
Signed-off-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Reviewed-by: default avatarMartin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241014223312.4254-1-kuniyu@amazon.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e8c526f2
    • Wang Hai's avatar
      net: bcmasp: fix potential memory leak in bcmasp_xmit() · fed07d3e
      Wang Hai authored 
      The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb
in case of mapping fails, add dev_kfree_skb() to fix it.

Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: default avatarWang Hai <wanghai38@huawei.com>
Acked-by: default avatarFlorian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241014145901.48940-1-wanghai38@huawei.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      fed07d3e
  3. 15 Oct, 2024 18 commits
  5. 14 Oct, 2024 1 commit
  7. 11 Oct, 2024 10 commits
    • Alessandro Zanni's avatar
      selftests: drivers: net: fix name not defined · 174714f0
      Alessandro Zanni authored 
      This fix solves this error, when calling kselftest with targets
"drivers/net":

File "tools/testing/selftests/net/lib/py/nsim.py", line 64, in __init__
  if e.errno == errno.ENOSPC:
NameError: name 'errno' is not defined

The error was found by running tests manually with the command:
make kselftest TARGETS="drivers/net"

The module errno makes available standard error system symbols.
Reviewed-by: default avatarPetr Machata <petrm@nvidia.com>
Signed-off-by: default avatarAlessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20241010183034.24739-1-alessandro.zanni87@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      174714f0
    • Alessandro Zanni's avatar
      selftests: net/rds: add module not found · 6ea8a1c2
      Alessandro Zanni authored 
      This fix solves this error, when calling kselftest with targets "net/rds":

The error was found by running tests manually with the command:
make kselftest TARGETS="net/rds"

The patch also specifies to import ip() function from the utils module.
Signed-off-by: default avatarAlessandro Zanni <alessandro.zanni87@gmail.com>
Reviewed-by: default avatarAllison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20241010194421.48198-1-alessandro.zanni87@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      6ea8a1c2
    • Wei Fang's avatar
      net: enetc: add missing static descriptor and inline keyword · 1d7b2ce4
      Wei Fang authored 
      Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.

include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
      62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
         |                  ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
      62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
         | ^
         | static
8 warnings generated.

Fixes: 6517798d ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: stable@vger.kernel.org
Reported-by: default avatarkernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/Signed-off-by: default avatarWei Fang <wei.fang@nxp.com>
Reviewed-by: default avatarClaudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1d7b2ce4
    • Jakub Kicinski's avatar
      Merge branch 'net-enetc-fix-some-issues-of-xdp' · 0af8c8ae
      Jakub Kicinski authored 
      Wei Fang says:

====================
net: enetc: fix some issues of XDP

We found some bugs when testing the XDP function of enetc driver,
and these bugs are easy to reproduce. This is not only causes XDP
to not work, but also the network cannot be restored after exiting
the XDP program. So the patch set is mainly to fix these bugs. For
details, please see the commit message of each patch.

v1: https://lore.kernel.org/bpf/20240919084104.661180-1-wei.fang@nxp.com/
v2: https://lore.kernel.org/netdev/20241008224806.2onzkt3gbslw5jxb@skbuf/
v3: https://lore.kernel.org/imx/20241009090327.146461-1-wei.fang@nxp.com/
====================

Link: https://patch.msgid.link/20241010092056.298128-1-wei.fang@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      0af8c8ae
    • Wei Fang's avatar
      net: enetc: disable NAPI after all rings are disabled · 6b58fadd
      Wei Fang authored 
      When running "xdp-bench tx eno0" to test the XDP_TX feature of ENETC
on LS1028A, it was found that if the command was re-run multiple times,
Rx could not receive the frames, and the result of xdp-bench showed
that the rx rate was 0.

root@ls1028ardb:~# ./xdp-bench tx eno0
Hairpinning (XDP_TX) packets on eno0 (ifindex 3; driver fsl_enetc)
Summary                      2046 rx/s                  0 err,drop/s
Summary                         0 rx/s                  0 err,drop/s
Summary                         0 rx/s                  0 err,drop/s
Summary                         0 rx/s                  0 err,drop/s

By observing the Rx PIR and CIR registers, CIR is always 0x7FF and
PIR is always 0x7FE, which means that the Rx ring is full and can no
longer accommodate other Rx frames. Therefore, the problem is caused
by the Rx BD ring not being cleaned up.

Further analysis of the code revealed that the Rx BD ring will only
be cleaned if the "cleaned_cnt > xdp_tx_in_flight" condition is met.
Therefore, some debug logs were added to the driver and the current
values of cleaned_cnt and xdp_tx_in_flight were printed when the Rx
BD ring was full. The logs are as follows.

[  178.762419] [XDP TX] >> cleaned_cnt:1728, xdp_tx_in_flight:2140
[  178.771387] [XDP TX] >> cleaned_cnt:1941, xdp_tx_in_flight:2110
[  178.776058] [XDP TX] >> cleaned_cnt:1792, xdp_tx_in_flight:2110

From the results, the max value of xdp_tx_in_flight has reached 2140.
However, the size of the Rx BD ring is only 2048. So xdp_tx_in_flight
did not drop to 0 after enetc_stop() is called and the driver does not
clear it. The root cause is that NAPI is disabled too aggressively,
without having waited for the pending XDP_TX frames to be transmitted,
and their buffers recycled, so that xdp_tx_in_flight cannot naturally
drop to 0. Later, enetc_free_tx_ring() does free those stale, unsent
XDP_TX packets, but it is not coded up to also reset xdp_tx_in_flight,
hence the manifestation of the bug.

One option would be to cover this extra condition in enetc_free_tx_ring(),
but now that the ENETC_TX_DOWN exists, we have created a window at
the beginning of enetc_stop() where NAPI can still be scheduled, but
any concurrent enqueue will be blocked. Therefore, enetc_wait_bdrs()
and enetc_disable_tx_bdrs() can be called with NAPI still scheduled,
and it is guaranteed that this will not wait indefinitely, but instead
give us an indication that the pending TX frames have orderly dropped
to zero. Only then should we call napi_disable().

This way, enetc_free_tx_ring() becomes entirely redundant and can be
dropped as part of subsequent cleanup.

The change also refactors enetc_start() so that it looks like the
mirror opposite procedure of enetc_stop().

Fixes: ff58fda0 ("net: enetc: prioritize ability to go down over packet processing")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarWei Fang <wei.fang@nxp.com>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-5-wei.fang@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      6b58fadd
    • Wei Fang's avatar
      net: enetc: disable Tx BD rings after they are empty · 0a93f2ca
      Wei Fang authored 
      The Tx BD rings are disabled first in enetc_stop() and the driver
waits for them to become empty. This operation is not safe while
the ring is actively transmitting frames, and will cause the ring
to not be empty and hardware exception. As described in the NETC
block guide, software should only disable an active Tx ring after
all pending ring entries have been consumed (i.e. when PI = CI).
Disabling a transmit ring that is actively processing BDs risks
a HW-SW race hazard whereby a hardware resource becomes assigned
to work on one or more ring entries only to have those entries be
removed due to the ring becoming disabled.

When testing XDP_REDIRECT feautre, although all frames were blocked
from being put into Tx rings during ring reconfiguration, the similar
warning log was still encountered:

fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear

The reason is that when there are still unsent frames in the Tx ring,
disabling the Tx ring causes the remaining frames to be unable to be
sent out. And the Tx ring cannot be restored, which means that even
if the xdp program is uninstalled, the Tx frames cannot be sent out
anymore. Therefore, correct the operation order in enect_start() and
enect_stop().

Fixes: ff58fda0 ("net: enetc: prioritize ability to go down over packet processing")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarWei Fang <wei.fang@nxp.com>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-4-wei.fang@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      0a93f2ca
    • Wei Fang's avatar
      net: enetc: block concurrent XDP transmissions during ring reconfiguration · c728a95c
      Wei Fang authored 
      When testing the XDP_REDIRECT function on the LS1028A platform, we
found a very reproducible issue that the Tx frames can no longer be
sent out even if XDP_REDIRECT is turned off. Specifically, if there
is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on,
the console may display some warnings like "timeout for tx ring #6
clear", and all redirected frames will be dropped, the detailed log
is as follows.

root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2
Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc)
[203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear
[204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
[204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear
eno0->eno2     1420505 rx/s       1420590 err,drop/s      0 xmit/s
  xmit eno0->eno2    0 xmit/s     1420590 drop/s     0 drv_err/s     15.71 bulk-avg
eno0->eno2     1420484 rx/s       1420485 err,drop/s      0 xmit/s
  xmit eno0->eno2    0 xmit/s     1420485 drop/s     0 drv_err/s     15.71 bulk-avg

By analyzing the XDP_REDIRECT implementation of enetc driver, the
driver will reconfigure Tx and Rx BD rings when a bpf program is
installed or uninstalled, but there is no mechanisms to block the
redirected frames when enetc driver reconfigures rings. Similarly,
XDP_TX verdicts on received frames can also lead to frames being
enqueued in the Tx rings. Because XDP ignores the state set by the
netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to
suppress transmission of XDP frames.

Fixes: c33bfaf9 ("net: enetc: set up XDP program under enetc_reconfigure()")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarWei Fang <wei.fang@nxp.com>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-3-wei.fang@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c728a95c
    • Wei Fang's avatar
      net: enetc: remove xdp_drops statistic from enetc_xdp_drop() · 412950d5
      Wei Fang authored 
      The xdp_drops statistic indicates the number of XDP frames dropped in
the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and
XDP_REDIRECT actions. If frame loss occurs in these two actions, the
frames loss count should not be included in xdp_drops, because there
are already xdp_tx_drops and xdp_redirect_failures to count the frame
loss of these two actions, so it's better to remove xdp_drops statistic
from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action.

Fixes: 7ed2bc80 ("net: enetc: add support for XDP_TX")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarWei Fang <wei.fang@nxp.com>
Reviewed-by: default avatarMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-2-wei.fang@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      412950d5
    • Daniel Machon's avatar
      net: sparx5: fix source port register when mirroring · 8a6be4bd
      Daniel Machon authored 
      When port mirroring is added to a port, the bit position of the source
port, needs to be written to the register ANA_AC_PROBE_PORT_CFG.  This
register is replicated for n_ports > 32, and therefore we need to derive
the correct register from the port number.

Before this patch, we wrongly calculate the register from portno /
BITS_PER_BYTE, where the divisor ought to be 32, causing any port >=8 to
be written to the wrong register. We fix this, by using do_div(), where
the dividend is the register, the remainder is the bit position and the
divisor is now 32.

Fixes: 4e50d72b ("net: sparx5: add port mirroring implementation")
Signed-off-by: default avatarDaniel Machon <daniel.machon@microchip.com>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-mirroring-fix-v1-1-9ec962301989@microchip.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8a6be4bd
    • Xin Long's avatar
      ipv4: give an IPv4 dev to blackhole_netdev · 22600596
      Xin Long authored 
      After commit 8d7017fd ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), blackhole_netdev was introduced to invalidate
dst cache entries on the TX path whenever the cache times out or is
flushed.

When two UDP sockets (sk1 and sk2) send messages to the same destination
simultaneously, they are using the same dst cache. If the dst cache is
invalidated on one path (sk2) while the other (sk1) is still transmitting,
sk1 may try to use the invalid dst entry.

         CPU1                   CPU2

      udp_sendmsg(sk1)       udp_sendmsg(sk2)
      udp_send_skb()
      ip_output()
                                             <--- dst timeout or flushed
                             dst_dev_put()
      ip_finish_output2()
      ip_neigh_for_gw()

This results in a scenario where ip_neigh_for_gw() returns -EINVAL because
blackhole_dev lacks an in_dev, which is needed to initialize the neigh in
arp_constructor(). This error is then propagated back to userspace,
breaking the UDP application.

The patch fixes this issue by assigning an in_dev to blackhole_dev for
IPv4, similar to what was done for IPv6 in commit e5f80fcf ("ipv6:
give an IPv6 dev to blackhole_netdev"). This ensures that even when the
dst entry is invalidated with blackhole_dev, it will not fail to create
the neigh entry.

As devinet_init() is called ealier than blackhole_netdev_init() in system
booting, it can not assign the in_dev to blackhole_dev in devinet_init().
As Paolo suggested, add a separate late_initcall() in devinet.c to ensure
inet_blackhole_dev_init() is called after blackhole_netdev_init().

Fixes: 8d7017fd ("blackhole_netdev: use blackhole_netdev to invalidate dst entries")
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/3000792d45ca44e16c785ebe2b092e610e5b3df1.1728499633.git.lucien.xin@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      22600596
  9. 10 Oct, 2024 8 commits
    • Linus Torvalds's avatar
      Merge tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 1d227fcc
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth and netfilter.

  Current release - regressions:

   - dsa: sja1105: fix reception from VLAN-unaware bridges

   - Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is
     enabled"

   - eth: fec: don't save PTP state if PTP is unsupported

  Current release - new code bugs:

   - smc: fix lack of icsk_syn_mss with IPPROTO_SMC, prevent null-deref

   - eth: airoha: update Tx CPU DMA ring idx at the end of xmit loop

   - phy: aquantia: AQR115c fix up PMA capabilities

  Previous releases - regressions:

   - tcp: 3 fixes for retrans_stamp and undo logic

  Previous releases - always broken:

   - net: do not delay dst_entries_add() in dst_release()

   - netfilter: restrict xtables extensions to families that are safe,
     syzbot found a way to combine ebtables with extensions that are
     never used by userspace tools

   - sctp: ensure sk_state is set to CLOSED if hashing fails in
     sctp_listen_start

   - mptcp: handle consistently DSS corruption, and prevent corruption
     due to large pmtu xmit"

* tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
  MAINTAINERS: Add headers and mailing list to UDP section
  MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL]
  slip: make slhc_remember() more robust against malicious packets
  net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC
  ppp: fix ppp_async_encode() illegal access
  docs: netdev: document guidance on cleanup patches
  phonet: Handle error of rtnl_register_module().
  mpls: Handle error of rtnl_register_module().
  mctp: Handle error of rtnl_register_module().
  bridge: Handle error of rtnl_register_module().
  vxlan: Handle error of rtnl_register_module().
  rtnetlink: Add bulk registration helpers for rtnetlink message handlers.
  net: do not delay dst_entries_add() in dst_release()
  mptcp: pm: do not remove closing subflows
  mptcp: fallback when MPTCP opts are dropped after 1st data
  tcp: fix mptcp DSS corruption due to large pmtu xmit
  mptcp: handle consistently DSS corruption
  net: netconsole: fix wrong warning
  net: dsa: refuse cross-chip mirroring operations
  net: fec: don't save PTP state if PTP is unsupported
  ...
      1d227fcc
    • Linus Torvalds's avatar
      Merge tag 'trace-ringbuffer-v6.12-rc2' of... · 0edab8d1
      Linus Torvalds authored 
      Merge tag 'trace-ringbuffer-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing fix from Steven Rostedt:
 "Ring-buffer fix: do not have boot-mapped buffers use CPU hotplug
  callbacks

  When a ring buffer is mapped to memory assigned at boot, it also
  splits it up evenly between the possible CPUs. But the allocation code
  still attached a CPU notifier callback to this ring buffer. When a CPU
  is added, the callback will happen and another per-cpu buffer is
  created for the ring buffer.

  But for boot mapped buffers, there is no room to add another one (as
  they were all created already). The result of calling the CPU hotplug
  notifier on a boot mapped ring buffer is unpredictable and could lead
  to a system crash.

  If the ring buffer is boot mapped simply do not attach the CPU
  notifier to it"

* tag 'trace-ringbuffer-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Do not have boot mapped buffers hook to CPU hotplug
      0edab8d1
    • Linus Torvalds's avatar
      Merge tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux · eb952c47
      Linus Torvalds authored 
      Pull btrfs fixes from David Sterba:

 - update fstrim loop and add more cancellation points, fix reported
   delayed or blocked suspend if there's a huge chunk queued

 - fix error handling in recent qgroup xarray conversion

 - in zoned mode, fix warning printing device path without RCU
   protection

 - again fix invalid extent xarray state (6252690f), lost due to
   refactoring

* tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix clear_dirty and writeback ordering in submit_one_sector()
  btrfs: zoned: fix missing RCU locking in error message when loading zone info
  btrfs: fix missing error handling when adding delayed ref with qgroups enabled
  btrfs: add cancellation points to trim loops
  btrfs: split remaining space to discard in chunks
      eb952c47
    • Linus Torvalds's avatar
      Merge tag 'nfsd-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux · 5870963f
      Linus Torvalds authored 
      Pull nfsd fixes from Chuck Lever:

 - Fix NFSD bring-up / shutdown

 - Fix a UAF when releasing a stateid

* tag 'nfsd-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: fix possible badness in FREE_STATEID
  nfsd: nfsd_destroy_serv() must call svc_destroy() even if nfsd_startup_net() failed
  NFSD: Mark filecache "down" if init fails
      5870963f
    • Linus Torvalds's avatar
      Merge tag 'xfs-6.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux · 825ec756
      Linus Torvalds authored 
      Pull xfs fixes from Carlos Maiolino:

 - A few small typo fixes

 - fstests xfs/538 DEBUG-only fix

 - Performance fix on blockgc on COW'ed files, by skipping trims on
   cowblock inodes currently opened for write

 - Prevent cowblocks to be freed under dirty pagecache during unshare

 - Update MAINTAINERS file to quote the new maintainer

* tag 'xfs-6.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix a typo
  xfs: don't free cowblocks from under dirty pagecache on unshare
  xfs: skip background cowblock trims on inodes open for write
  xfs: support lowmode allocations in xfs_bmap_exact_minlen_extent_alloc
  xfs: call xfs_bmap_exact_minlen_extent_alloc from xfs_bmap_btalloc
  xfs: don't ifdef around the exact minlen allocations
  xfs: fold xfs_bmap_alloc_userdata into xfs_bmapi_allocate
  xfs: distinguish extra split from real ENOSPC from xfs_attr_node_try_addname
  xfs: distinguish extra split from real ENOSPC from xfs_attr3_leaf_split
  xfs: return bool from xfs_attr3_leaf_add
  xfs: merge xfs_attr_leaf_try_add into xfs_attr_leaf_addname
  xfs: Use try_cmpxchg() in xlog_cil_insert_pcp_aggregate()
  xfs: scrub: convert comma to semicolon
  xfs: Remove empty declartion in header file
  MAINTAINERS: add Carlos Maiolino as XFS release manager
      825ec756
    • Jakub Kicinski's avatar
      Merge branch 'maintainers-networking-file-coverage-updates' · 7b43ba65
      Jakub Kicinski authored 
      Simon Horman says:

====================
MAINTAINERS: Networking file coverage updates

The aim of this proposal is to make the handling of some files,
related to Networking and Wireless, more consistently. It does so by:

1. Adding some more headers to the UDP section, making it consistent
   with the TCP section.

2. Excluding some files relating to Wireless from NETWORKING [GENERAL],
   making their handling consistent with other files related to
   Wireless.

The aim of this is to make things more consistent.  And for MAINTAINERS
to better reflect the situation on the ground.  I am more than happy to
be told that the current state of affairs is fine. Or for other ideas to
be discussed.

v1: https://lore.kernel.org/20241004-maint-net-hdrs-v1-0-41fd555aacc5@kernel.org
====================

Link: https://patch.msgid.link/20241009-maint-net-hdrs-v2-0-f2c86e7309c8@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      7b43ba65
    • Simon Horman's avatar
      MAINTAINERS: Add headers and mailing list to UDP section · 5404b5a2
      Simon Horman authored 
      Add netdev mailing list and some more udp.h headers to the UDP section.
This is now more consistent with the TCP section.
Acked-by: default avatarWillem de Bruijn <willemb@google.com>
Signed-off-by: default avatarSimon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-maint-net-hdrs-v2-2-f2c86e7309c8@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      5404b5a2
    • Simon Horman's avatar
      MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL] · 9937aae3
      Simon Horman authored 
      We already exclude wireless drivers from the netdev@ traffic, to
delegate it to linux-wireless@, and avoid overwhelming netdev@.

Many of the following wireless-related sections MAINTAINERS
are already not included in the NETWORKING [GENERAL] section.
For consistency, exclude those that are.

* 802.11 (including CFG80211/NL80211)
* MAC80211
* RFKILL
Acked-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarSimon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-maint-net-hdrs-v2-1-f2c86e7309c8@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9937aae3
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7