This is preparation for moving the generic DSP support out of
ASoC. This change separates the generic handling of power and state
transitions from the DAPM API wrapper.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-9-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Split some functions into ASoC and generic portions so that existing
interfaces can be retained whilst allowing the implementation to be
moved out of ASoC.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-8-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

In preparation for moving the generic DSP support out of ASoC, add
some new logging macros that will be used from the generic code.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-7-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

This rename is preparation for moving the generic DSP support out of
ASoC, generic code named wm_* will be renamed to cs_*.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-6-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Removes wm_adsp_ctl_work and integrates the work_struct into
wm_coeff_ctl so it may be referenced.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-5-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

When parsing a compressed buffer from the firmware the driver currently
open codes reading the firmware coefficient containing the buffer
description. Improve this slightly by using the coefficient read
functions already provided by the wm_adsp driver. It is worth noting
this change requires the running variable to be set before
wm_adsp_buffer_init is called, however this is safe, since its all still
under the power lock and nothing in the compressed code gates itself on
running.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-4-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Checking earlier in the function if a control already exists avoids
superfluous string construction and also prepares for future
refactoring.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-3-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

In preparation for moving the generic DSP support out of ASoC, remove
the use of the ALSA specific types for the control type. The use of an
ALSA type was unnecessary, the simplified code is easier to read and
avoids Sparse warnings.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-2-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the pl1022_rdk driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-16-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the pl1022_ds driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-15-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the mpc8610_hpcd driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-14-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the imx-sgtl5000 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-13-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the imx-rpmsg driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-12-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the imx-hdmi driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-11-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the imx-es8328 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-10-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the imx-card driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-9-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the imx-audmix driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-8-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the fsl_ssi driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-7-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the fsl_sai driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-6-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the fsl-mqs driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-5-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the fsl-esai driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-4-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the fsl-audmix driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-3-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the fsl-asoc-card driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-2-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the eureka-tlv320 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921213542.31688-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the cros_ec_codec driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210920170414.17903-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

commit 82d3ec1d ("ASoC: Use schema reference for sound-name-prefix")
added name-prefix.yaml schema and the same reference was used in couple
of other schemas. But this is causing following warning and the same is
fixed in current patch.

 Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
 audio-codec@34: 'sound-name-prefix' does not match any of the regexes:
 'pinctrl-[0-9]+'
  From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
 Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
 audio-codec@36: 'sound-name-prefix' does not match any of the regexes:
 'pinctrl-[0-9]+'
  From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml

Fixes: 82d3ec1d ("ASoC: Use schema reference for sound-name-prefix")
Reported-by: Rob Herring <robh+dt@kernel.org>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1632238860-16947-1-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is a spelling mistake in the module description. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210920184152.18109-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

On i.MX8ULP the spdif works with EDMA, so add compatible
string and soc specific data for i.MX8ULP.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1631238562-27081-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

These are only assigned to the ops field in the snd_soc_dai_link struct
which is a pointer to const struct snd_soc_ops. Make them const to allow
the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210920193947.10237-1-rikard.falkeborn@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Revert 6e8cc4dd ("spi: tegra20-slink: Declare runtime suspend and
resume functions conditionally") which was mistakenly applied to the
ASoC tree not the SPI tree (where it was also applied.
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: compress: Support module_get on stream open" from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

Hi,

SOF is marking all componet drivers with module_get_upon_open = 1 which works
fine with normal PCM streams, however on compressed side the module get upon
open is not supported. The module_get works when module_get_upon_open is not set
becasue the snd_soc_component_module_get_when_probe() will pass NULL for the
substream parameter of snd_soc_component_module_get().

In order to re-use the existing infrastructure for module_get, the proposal is
to convert the mark_module to void pointer (like the pm mark) and implement
matching code for the compressed open/free to pcm open/close.

Regards,
Peter
---
Peter Ujfalusi (2):
  ASoC: soc-component: Convert the mark_module to void*
  ASoC: compress/component: Use module_get_when_open/put_when_close for
    cstream

 include/sound/soc-component.h | 14 ++++----
 sound/soc/soc-component.c     | 61 +++++++++++++++--------------------
 sound/soc/soc-compress.c      | 43 +++++++++++++++++++++---
 3 files changed, 71 insertions(+), 47 deletions(-)

--
2.33.0

Merge series "Extend AHUB audio support for Tegra210 and later" from Sameer Pujar <spujar@nvidia.com>:

Earlier as part of series [0], support for ADMAIF and I/O modules (such
as I2S, DMIC and DSPK) was added. This series aims at exposing some of
the AHUB internal modules (listed below), which can be used for audio
pre or post processing.

  * SFC (Sampling Frequency Converter)
  * MVC (Master Volume Control)
  * AMX (Audio Multiplexer)
  * ADX (Audio Demultiplexer)
  * Mixer

These modules can be plugged into audio paths and relevant processing
can be done. The MUX routes are extended to allow add or remove above
modules in the path via mixer controls. This is similar to how specific
ADMAIF channels are connected to relevant I/O module instances at the
moment.

Some of these modules can alter PCM parameters. Consider example of
resampler (44.1 -> 48 kHz) in the path.

  aplay(44.1 kHz) -> ADMAIF -> SFC -> (48 kHz) I2S -> (48kHz) Codec

The modules following SFC should be using converted sample rate and DAIs
need to be configured accordingly. The audio-graph driver provides a
mechanism to fixup the new parameters which can be specified in DT for a
given DAI. Then core uses these new values via fixup callback and then
pass it to respective DAIs hw_param() callback. The "convert-rate",
described in [1], property can be used when there is rate conversion in
the audio path. Similarly "convert-channels" can be used when there is
channel conversion in the path. There is no "convert-xxx" property for
sample size conversions. It can be added if necessary.

[0] https://www.lkml.org/lkml/2020/7/21/1357
[1] Documentation/devicetree/bindings/sound/audio-graph-port.yaml

Changelog
=========

v1 -> v2
--------
 * Put comments for soft reset application in the drivers.
 * Split out mute/volume control logic in put() calls of MVC driver and
   use separate callbacks for the respective kcontrols.
 * Update kcontrol put() callback in MVC driver to return 1 whenever
   there is change. Similar change is done in other drivers too.
 * Use name-prefix.yaml reference for the driver documentation now.
 * Add sound-name-prefix pattern for MIXER driver and use prefix
   accordingly in DT.

Sameer Pujar (13):
  ASoC: soc-pcm: Don't reconnect an already active BE
  ASoC: simple-card-utils: Increase maximum DAI links limit to 512
  ASoC: audio-graph: Fixup CPU endpoint hw_params in a BE<->BE link
  ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules
  ASoC: tegra: Add routes for few AHUB modules
  ASoC: tegra: Add Tegra210 based MVC driver
  ASoC: tegra: Add Tegra210 based SFC driver
  ASoC: tegra: Add Tegra210 based AMX driver
  ASoC: tegra: Add Tegra210 based ADX driver
  ASoC: tegra: Add Tegra210 based Mixer driver
  arm64: defconfig: Enable few Tegra210 based AHUB drivers
  arm64: tegra: Add few AHUB devices for Tegra210 and later
  arm64: tegra: Extend APE audio support on Jetson platforms

 .../bindings/sound/nvidia,tegra210-adx.yaml        |   76 +
 .../bindings/sound/nvidia,tegra210-ahub.yaml       |   20 +
 .../bindings/sound/nvidia,tegra210-amx.yaml        |   76 +
 .../bindings/sound/nvidia,tegra210-mixer.yaml      |   74 +
 .../bindings/sound/nvidia,tegra210-mvc.yaml        |   76 +
 .../bindings/sound/nvidia,tegra210-sfc.yaml        |   73 +
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1554 ++++++++-
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |  120 +
 arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 1493 +++++++-
 .../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 1520 ++++++++-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           |  116 +
 arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts |  876 +++++
 arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts |  876 +++++
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           |   77 +
 arch/arm64/configs/defconfig                       |    5 +
 include/sound/simple_card_utils.h                  |    2 +-
 sound/soc/generic/audio-graph-card.c               |    4 +-
 sound/soc/soc-pcm.c                                |    4 +
 sound/soc/tegra/Kconfig                            |   48 +
 sound/soc/tegra/Makefile                           |   10 +
 sound/soc/tegra/tegra210_adx.c                     |  531 +++
 sound/soc/tegra/tegra210_adx.h                     |   72 +
 sound/soc/tegra/tegra210_ahub.c                    |  511 ++-
 sound/soc/tegra/tegra210_amx.c                     |  600 ++++
 sound/soc/tegra/tegra210_amx.h                     |   93 +
 sound/soc/tegra/tegra210_mixer.c                   |  674 ++++
 sound/soc/tegra/tegra210_mixer.h                   |  100 +
 sound/soc/tegra/tegra210_mvc.c                     |  645 ++++
 sound/soc/tegra/tegra210_mvc.h                     |  117 +
 sound/soc/tegra/tegra210_sfc.c                     | 3549 ++++++++++++++++++++
 sound/soc/tegra/tegra210_sfc.h                     |   78 +
 31 files changed, 13647 insertions(+), 423 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
 create mode 100644 sound/soc/tegra/tegra210_adx.c
 create mode 100644 sound/soc/tegra/tegra210_adx.h
 create mode 100644 sound/soc/tegra/tegra210_amx.c
 create mode 100644 sound/soc/tegra/tegra210_amx.h
 create mode 100644 sound/soc/tegra/tegra210_mixer.c
 create mode 100644 sound/soc/tegra/tegra210_mixer.h
 create mode 100644 sound/soc/tegra/tegra210_mvc.c
 create mode 100644 sound/soc/tegra/tegra210_mvc.h
 create mode 100644 sound/soc/tegra/tegra210_sfc.c
 create mode 100644 sound/soc/tegra/tegra210_sfc.h

--
2.7.4

We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210918213553.14514-2-wsa+renesas@sang-engineering.comSigned-off-by: Mark Brown <broonie@kernel.org>

As part of the effort to remove our old APIs based on outdated terminology
update the Intel board drivers to use modern terminology.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20210920065508.7854-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Correct several errors in rt5682s dtschema:
1. The examples should be under "examples":
    'example' is not one of ['$id', '$schema', 'title', 'description', 'examples', ...

2. Missing type for vendor properties

3. clock-names should be an array:
    properties:clock-names:items: {'const': 'mclk'} is not of type 'array'

4. Example DTS should include headers:
    [scripts/Makefile.lib:386: Documentation/devicetree/bindings/sound/realtek,rt5682s.example.dt.yaml] Error 1

5. Node name in example DTS misses unit address and does not match DT
   convention (generic name):
    Warning (reg_format): /example-0/rt5682s:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)

6. Node address should be in size-cells:0 block in example DTS:
    Warning (reg_format): /example-0/codec@1a:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)

Fixes: 50159fdb ("ASoC: dt-bindings: rt5682s: add bindings for rt5682s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210920112106.140918-1-krzysztof.kozlowski@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

As part of moving to remove the old style defines for the bus clocks update
the ab8500 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210916141335.43818-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

sof_get_ops() is not used and the struct sof_ops_table is only used by that
macro.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210920064156.4763-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This symbol is not used outside of rt5682s.c, so marks it static.

Fix the following sparse warning:

sound/soc/codecs/rt5682s.c:2848:39: warning: symbol
'rt5682s_soc_component_dev' was not declared. Should it be static?

sound/soc/codecs/rt5682s.c:2842:30: warning: symbol
'rt5682s_aif2_dai_ops' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1631955726-77693-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Mixer supports mixing of up to ten 7.1 audio input streams and
generate five outputs (each of which can be any combination of the
ten input streams)

This patch registers Mixer driver with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device.
The DAI driver exposes Mixer interfaces, which can be used to connect
different components in the ASoC layer. Makefile and Kconfig support
is added to allow build the driver. It can be enabled in the DT via
"nvidia,tegra210-amixer" compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-11-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Audio Demultiplexer (ADX) block takes an input stream with up to
16 channels and demultiplexes it into four output streams of up to 16
channels each. A byte RAM helps to form output frames by any combination
of bytes from the input frame. Its design is identical to that of byte
RAM in the AMX except that the data flow direction is reversed.

This patch registers ADX driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes ADX interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-adx"
compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>