Skip to content

L
linux
Switch branch/tag
  1. 06 Oct, 2017 4 commits
    • Seth Forshee's avatar
      powerpc: Always initialize input array when calling epapr_hypercall() · 186b8f15
      Seth Forshee authored 
      Several callers to epapr_hypercall() pass an uninitialized stack
allocated array for the input arguments, presumably because they
have no input arguments. However this can produce errors like
this one

 arch/powerpc/include/asm/epapr_hcalls.h:470:42: error: 'in' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  unsigned long register r3 asm("r3") = in[0];
                                        ~~^~~

Fix callers to this function to always zero-initialize the input
arguments array to prevent this.
Signed-off-by: default avatarSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      186b8f15
    • Michael Neuling's avatar
      powerpc: Add PPC_EMULATED_STATS to powernv_defconfig · e366b921
      Michael Neuling authored 
      This is useful, especially for developers.
Signed-off-by: default avatarMichael Neuling <mikey@neuling.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      e366b921
    • Guilherme G. Piccoli's avatar
      powerpc/xmon: Add option to show uptime information · 59d3391e
      Guilherme G. Piccoli authored 
      It might be useful to quickly get the uptime of a running system on
xmon, without needing to grab data from memory and doing math on
struct addresses.

For example, it'd be useful to check for how long after a crash a
system is on xmon shell or if some test was started after the first
test crashed (and this 2nd test crashed too into xmon).

This small patch adds the 'U' command, to accomplish this.
Suggested-by: default avatarMurilo Fossa Vicentini <muvic@linux.vnet.ibm.com>
Signed-off-by: default avatarGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
[mpe: Display units (seconds), add sync()/__delay() sequence]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      59d3391e
    • Michael Ellerman's avatar
      powerpc/powernv: Make opal_event_shutdown() callable from IRQ context · c6baa077
      Michael Ellerman authored 
      In opal_event_shutdown() we free all the IRQs hanging off the
opal_event_irqchip. However it's not safe to do so if we're called
from IRQ context, because free_irq() wants to synchronise versus IRQ
context. This can lead to warnings and a stuck system.

For example from sysrq-b:

  Trying to free IRQ 17 from IRQ context!
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1461 __free_irq+0x398/0x8d0
  ...
  NIP __free_irq+0x398/0x8d0
  LR __free_irq+0x394/0x8d0
  Call Trace:
    __free_irq+0x394/0x8d0 (unreliable)
    free_irq+0xa4/0x140
    opal_event_shutdown+0x128/0x180
    opal_shutdown+0x1c/0xb0
    pnv_shutdown+0x20/0x40
    machine_restart+0x38/0x90
    emergency_restart+0x28/0x40
    sysrq_handle_reboot+0x24/0x40
    __handle_sysrq+0x198/0x590
    hvc_poll+0x48c/0x8c0
    hvc_handle_interrupt+0x1c/0x50
    __handle_irq_event_percpu+0xe8/0x6e0
    handle_irq_event_percpu+0x34/0xe0
    handle_irq_event+0xc4/0x210
    handle_level_irq+0x250/0x770
    generic_handle_irq+0x5c/0xa0
    opal_handle_events+0x11c/0x240
    opal_interrupt+0x38/0x50
    __handle_irq_event_percpu+0xe8/0x6e0
    handle_irq_event_percpu+0x34/0xe0
    handle_irq_event+0xc4/0x210
    handle_fasteoi_irq+0x174/0xa10
    generic_handle_irq+0x5c/0xa0
    __do_irq+0xbc/0x4e0
    call_do_irq+0x14/0x24
    do_IRQ+0x18c/0x540
    hardware_interrupt_common+0x158/0x180

We can avoid that by using disable_irq_nosync() rather than
free_irq(). Although it doesn't fully free the IRQ, it should be
sufficient when we're shutting down, particularly in an emergency.

Add an in_interrupt() check and use free_irq() when we're shutting
down normally. It's probably OK to use disable_irq_nosync() in that
case too, but for now it's safer to leave that behaviour as-is.

Fixes: 9f0fd049 ("powerpc/powernv: Add a virtual irqchip for opal events")
Reported-by: default avatarAnton Blanchard <anton@samba.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      c6baa077
  3. 05 Oct, 2017 2 commits
    • Naveen N. Rao's avatar
      powerpc/jprobes: Validate break handler invocation as being due to a jprobe_return() · 3368f569
      Naveen N. Rao authored 
      Fix a circa 2005 FIXME by implementing a check to ensure that we
actually got into the jprobe break handler() due to the trap in
jprobe_return().
Acked-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: default avatarNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      3368f569
    • Naveen N. Rao's avatar
      powerpc/jprobes: Disable preemption when triggered through ftrace · 6baea433
      Naveen N. Rao authored 
      KPROBES_SANITY_TEST throws the below splat when CONFIG_PREEMPT is
enabled:

  Kprobe smoke test: started
  DEBUG_LOCKS_WARN_ON(val > preempt_count())
  ------------[ cut here ]------------
  WARNING: CPU: 19 PID: 1 at kernel/sched/core.c:3094 preempt_count_sub+0xcc/0x140
  Modules linked in:
  CPU: 19 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc7-nnr+ #97
  task: c0000000fea80000 task.stack: c0000000feb00000
  NIP:  c00000000011d3dc LR: c00000000011d3d8 CTR: c000000000a090d0
  REGS: c0000000feb03400 TRAP: 0700   Not tainted  (4.13.0-rc7-nnr+)
  MSR:  8000000000021033 <SF,ME,IR,DR,RI,LE>  CR: 28000282  XER: 00000000
  CFAR: c00000000015aa18 SOFTE: 0
  <snip>
  NIP preempt_count_sub+0xcc/0x140
  LR  preempt_count_sub+0xc8/0x140
  Call Trace:
    preempt_count_sub+0xc8/0x140 (unreliable)
    kprobe_handler+0x228/0x4b0
    program_check_exception+0x58/0x3b0
    program_check_common+0x16c/0x170
    --- interrupt: 0 at kprobe_target+0x8/0x20
                     LR = init_test_probes+0x248/0x7d0
    kp+0x0/0x80 (unreliable)
    livepatch_handler+0x38/0x74
    init_kprobes+0x1d8/0x208
    do_one_initcall+0x68/0x1d0
    kernel_init_freeable+0x298/0x374
    kernel_init+0x24/0x160
    ret_from_kernel_thread+0x5c/0x70
  Instruction dump:
  419effdc 3d22001b 39299240 81290000 2f890000 409effc8 3c82ffcb 3c62ffcb
  3884bc68 3863bc18 4803d5fd 60000000 <0fe00000> 4bffffa8 60000000 60000000
  ---[ end trace 432dd46b4ce3d29f ]---
  Kprobe smoke test: passed successfully

The issue is that we aren't disabling preemption in
kprobe_ftrace_handler(). Disable it.

Fixes: ead514d5 ("powerpc/kprobes: Add support for KPROBES_ON_FTRACE")
Acked-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: default avatarNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Trim oops a little for formatting]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      6baea433
  5. 04 Oct, 2017 18 commits
  7. 03 Oct, 2017 1 commit
  9. 28 Sep, 2017 2 commits
    • Frederic Barrat's avatar
      cxl: Enable global TLBIs for cxl contexts · 03b8abed
      Frederic Barrat authored 
      The PSL and nMMU need to see all TLB invalidations for the memory
contexts used on the adapter. For the hash memory model, it is done by
making all TLBIs global as soon as the cxl driver is in use. For
radix, we need something similar, but we can refine and only convert
to global the invalidations for contexts actually used by the device.

The new mm_context_add_copro() API increments the 'active_cpus' count
for the contexts attached to the cxl adapter. As soon as there's more
than 1 active cpu, the TLBIs for the context become global. Active cpu
count must be decremented when detaching to restore locality if
possible and to avoid overflowing the counter.

The hash memory model support is somewhat limited, as we can't
decrement the active cpus count when mm_context_remove_copro() is
called, because we can't flush the TLB for a mm on hash. So TLBIs
remain global on hash.
Signed-off-by: default avatarFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Fixes: f24be42a ("cxl: Add psl9 specific code")
Tested-by: default avatarAlistair Popple <alistair@popple.id.au>
[mpe: Fold in updated comment on the barrier from Fred]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      03b8abed
    • Frederic Barrat's avatar
      powerpc/mm: Export flush_all_mm() · 6110236b
      Frederic Barrat authored 
      With the optimizations introduced by commit a46cc7a9
("powerpc/mm/radix: Improve TLB/PWC flushes"), flush_tlb_mm() no
longer flushes the page walk cache (PWC) with radix. This patch
introduces flush_all_mm(), which flushes everything, TLB and PWC, for
a given mm.
Signed-off-by: default avatarFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-By: default avatarAlistair Popple <alistair@popple.id.au>
[mpe: Add a WARN_ON_ONCE() in the empty hash routines]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      6110236b
  11. 26 Sep, 2017 2 commits
    • Michael Neuling's avatar
      powerpc/64s: Add workaround for P9 vector CI load issue · 5080332c
      Michael Neuling authored 
      POWER9 DD2.1 and earlier has an issue where some cache inhibited
vector load will return bad data. The workaround is two part, one
firmware/microcode part triggers HMI interrupts when hitting such
loads, the other part is this patch which then emulates the
instructions in Linux.

The affected instructions are limited to lxvd2x, lxvw4x, lxvb16x and
lxvh8x.

When an instruction triggers the HMI, all threads in the core will be
sent to the HMI handler, not just the one running the vector load.

In general, these spurious HMIs are detected by the emulation code and
we just return back to the running process. Unfortunately, if a
spurious interrupt occurs on a vector load that's to normal memory we
have no way to detect that it's spurious (unless we walk the page
tables, which is very expensive). In this case we emulate the load but
we need do so using a vector load itself to ensure 128bit atomicity is
preserved.

Some additional debugfs emulated instruction counters are added also.
Signed-off-by: default avatarMichael Neuling <mikey@neuling.org>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Switch CONFIG_PPC_BOOK3S_64 to CONFIG_VSX to unbreak the build]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      5080332c
    • Benjamin Herrenschmidt's avatar
      powerpc/powernv: Rework EEH initialization on powernv · b9fde58d
      Benjamin Herrenschmidt authored 
      Remove the post_init callback which is only used
by powernv, we can just call it explicitly from
the powernv code.

This partially kills the ability to "disable" eeh at
runtime via debugfs as this was calling that same
callback again, but this is both unused and broken
in several ways. If we want to revive it, we need
to create a dedicated enable/disable callback on the
backend that does the right thing.

Let the bulk of eeh initialize normally at
core_initcall() like it does on pseries by removing
the hack in eeh_init() that delays it.

Instead we make sure our eeh->probe cleanly bails
out of the PEs haven't been created yet and we force
a re-probe where we used to call eeh_init() again.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: default avatarRussell Currey <ruscur@russell.cc>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      b9fde58d
  13. 24 Sep, 2017 11 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7