- 12 Oct, 2021 2 commits
-
-
Mike Christie authored
In commit 9e67600e ("scsi: iscsi: Fix race condition between login and sync thread") we meant to add a check where before we call ->set_param() we make sure the iscsi_cls_connection is bound. The problem is that between versions 4 and 5 of the patch the deletion of the unchecked set_param() call was dropped so we ended up with 2 calls. As a result we can still hit a crash where we access the unbound connection on the first call. This patch removes that first call. Fixes: 9e67600e ("scsi: iscsi: Fix race condition between login and sync thread") Link: https://lore.kernel.org/r/20211010161904.60471-1-michael.christie@oracle.comReviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Li Feng <fengli@smartx.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Dexuan Cui authored
After commit ea2f0f77 ("scsi: core: Cap scsi_host cmd_per_lun at can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the hv_storvsc driver sets scsi_driver.can_queue to an integer value that exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets shost->cmd_per_lun to a negative "short" value. Use min_t(int, ...) to work around the issue. Link: https://lore.kernel.org/r/20211008043546.6006-1-decui@microsoft.com Fixes: ea2f0f77 ("scsi: core: Cap scsi_host cmd_per_lun at can_queue") Cc: stable@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 05 Oct, 2021 5 commits
-
-
Mike Christie authored
Commit d39df158 ("scsi: iscsi: Have abort handler get ref to conn") added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but then also changed the handling of the case where we detect an already completed task where we now end up doing a goto to the common put/cleanup code. This results in a iscsi_task use after free, because the common cleanup code will do a put on the iscsi_task. This reverts the goto and moves the iscsi_get_conn() to after we've checked if the iscsi_task is valid. Link: https://lore.kernel.org/r/20211004210608.9962-1-michael.christie@oracle.com Fixes: d39df158 ("scsi: iscsi: Have abort handler get ref to conn") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
When an FC-GS I/O is aborted by lpfc, the driver requires a node pointer for a dereference operation. In the abort I/O routine, the driver miscasts a context pointer to the wrong data type and overwrites a single byte outside of the allocated space. This miscast is done in the abort I/O function handler because the handler works on both FC-GS and FC-LS commands. However, the code neglected to get the correct job location for the node. Fix this by acquiring the necessary node pointer from the correct job structure depending on the I/O type. Link: https://lore.kernel.org/r/20211004231210.35524-1-jsmart2021@gmail.comCo-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Dan Carpenter authored
It's not holding the lock at this stage and the IRQ "flags" are not correct so it would restore something bogus. Delete the unlock statement. Link: https://lore.kernel.org/r/20211004103851.GE25015@kili Fixes: 3e641400 ("scsi: elx: efct: SCSI I/O handling routines") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Adrian Hunter authored
The UFS driver uses blk_mq_tagset_busy_iter() when identifying task management requests to complete, however blk_mq_tagset_busy_iter() doesn't work. blk_mq_tagset_busy_iter() only iterates requests dispatched by the block layer. That appears as if it might have started since commit 37f4a24c ("blk-mq: centralise related handling into blk_mq_get_driver_tag") which removed 'data->hctx->tags->rqs[rq->tag] = rq' from blk_mq_rq_ctx_init() which gets called: blk_get_request blk_mq_alloc_request __blk_mq_alloc_request blk_mq_rq_ctx_init Since UFS task management requests are not dispatched by the block layer, hctx->tags->rqs[rq->tag] remains NULL, and since blk_mq_tagset_busy_iter() relies on finding requests using hctx->tags->rqs[rq->tag], UFS task management requests are never found by blk_mq_tagset_busy_iter(). By using blk_mq_tagset_busy_iter(), the UFS driver was relying on internal details of the block layer, which was fragile and subsequently got broken. Fix by removing the use of blk_mq_tagset_busy_iter() and having the driver keep track of task management requests. Link: https://lore.kernel.org/r/20210922091059.4040-1-adrian.hunter@intel.com Fixes: 1235fc56 ("scsi: ufs: core: Fix task management request completion timeout") Fixes: 69a6c269 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs") Cc: stable@vger.kernel.org Tested-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
John Garry authored
Commit 756fb6a8 ("scsi: acornscsi: Remove tagged queuing vestiges") mistakenly introduced a reference to function scsi_cmd_to_tag(). This function does not exist as it was removed from an earlier series version when I upstreamed the named commit - originally authored By Hannes - but this reference still remained. Fix by replacing the reference to scsi_cmd_to_tag() with scsi_cmd_to_rq(scsi_scmd)->tag, which scsi_cmd_to_tag() was a wrapper for. Link: https://lore.kernel.org/r/1633002717-79765-1-git-send-email-john.garry@huawei.com Fixes: 756fb6a8 ("scsi: acornscsi: Remove tagged queuing vestiges") Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 29 Sep, 2021 5 commits
-
-
Rahul Lakkireddy authored
Both cxgb4 and csiostor drivers run on their own independent Physical Function. But when cxgb4 and csiostor are both being loaded in parallel via modprobe, there is a race when firmware upgrade is attempted by both the drivers. When the cxgb4 driver initiates the firmware upgrade, it halts the firmware and the chip until upgrade is complete. When the csiostor driver is coming up in parallel, the firmware mailbox communication fails with timeouts and the csiostor driver probe fails. Add a module soft dependency on cxgb4 driver to ensure loading csiostor triggers cxgb4 to load first when available to avoid the firmware upgrade race. Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com Fixes: a3667aae ("[SCSI] csiostor: Chelsio FCoE offload driver") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Arun Easi authored
Disable default logging of some I/O path messages. If desired, the messages can be turned back on by setting ql2xextended_error_logging. Link: https://lore.kernel.org/r/20210925035154.29815-1-njavali@marvell.comReviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
There are a couple of spelling mistakes in pr_info and pr_err messages. Fix them. Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Jiapeng Chong authored
Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Jonathan Hsu authored
Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace(). Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com Fixes: 4b42d557 ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs") Cc: stable@vger.kernel.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jonathan Hsu <jonathan.hsu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 22 Sep, 2021 12 commits
-
-
Wen Xiong authored
Setting SCSI logging level with error=3, we saw some errors from enclosues: [108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427778] ses 0:0:9:0: Power-on or device reset occurred [108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current] [108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred [108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1 [108017.427804] ses 0:0:9:0: Failed to bind enclosure -19 [108017.427895] ses 0:0:10:0: Attached Enclosure device [108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13 Retry if the Send/Receive Diagnostic commands complete with a transient error status (NOT_READY or UNIT_ATTENTION with ASC 0x29). Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.comReviewed-by: Brian King <brking@linux.ibm.com> Reviewed-by: James Bottomley <jejb@linux.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Link: https://lore.kernel.org/r/20210920183206.17477-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Arnd Bergmann authored
I fixed a stringop-overread warning earlier this year, now a second copy of the original code was added and the warning came back: drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_cmf_info_show': drivers/scsi/lpfc/lpfc_attr.c:289:25: error: 'strnlen' specified bound 4095 exceeds source size 24 [-Werror=stringop-overread] 289 | strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix it the same way as the other copy. Link: https://lore.kernel.org/r/20210920095628.1191676-1-arnd@kernel.org Fixes: ada48ba7 ("scsi: lpfc: Fix gcc -Wstringop-overread warning") Fixes: 74a7baa2 ("scsi: lpfc: Add cmf_info sysfs entry") Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Dan Carpenter authored
The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE". We're not going to hit the limit so this fix will not affect runtime. Link: https://lore.kernel.org/r/20210916132331.GE25094@kili Fixes: 5b9e70b2 ("scsi: lpfc: raise sg count for nvme to use available sg resources") Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Dan Carpenter authored
This scnprintf() uses the wrong limit. It should be "LPFC_FPIN_WWPN_LINE_SZ - len" instead of LPFC_FPIN_WWPN_LINE_SZ. Link: https://lore.kernel.org/r/20210916132251.GD25094@kili Fixes: 428569e6 ("scsi: lpfc: Expand FPIN and RDF receive logging") Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
The 'current_tag' field in struct scsi_device is unused now; remove it. Link: https://lore.kernel.org/r/1631696835-136198-4-git-send-email-john.garry@huawei.comReviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
The acornscsi driver has a config option to enable tagged queuing, but this option gets disabled in the driver itself with the comment 'needs to be debugged'. As this is a _really_ old driver I doubt anyone will be wanting to invest time here, so remove the tagged queue vestiges and make our lives easier. [jpg: Use scsi_cmd_to_rq()] Link: https://lore.kernel.org/r/1631696835-136198-3-git-send-email-john.garry@huawei.comSigned-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
The driver is attempting to allocate a tag internally which is a no-go with blk-mq. Switch the driver to use the request tag and kill usage of scmd->tag and scmd->device->current_tag. [jpg: Change to use scsi_cmd_to_rq()] Link: https://lore.kernel.org/r/1631696835-136198-2-git-send-email-john.garry@huawei.comSigned-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Dmitry Bogdanov authored
In dual mode in case of disabling the target, the whole port goes offline and initiator is turned off too. Fix restoring initiator mode after disabling target in dual mode. Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com Fixes: 0645cb83 ("scsi: qla2xxx: Add mode control for each physical port") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
A command tag is passed as the second argument of the __ufshcd_transfer_req_compl() call in ufshcd_eh_device_reset_handler() instead of a bitmask. Fix this by passing a bitmask as argument instead of a command tag. Link: https://lore.kernel.org/r/20210916175408.2260084-1-bvanassche@acm.org Fixes: a45f9371 ("scsi: ufs: Optimize host lock on transfer requests send/compl paths") Cc: Can Guo <cang@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
This patch addresses the following Coverity report about the zno * sdkp->zone_blocks expression: CID 1475514 (#1 of 1): Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN) overflow_before_widen: Potentially overflowing expression zno * sdkp->zone_blocks with type unsigned int (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type sector_t (64 bits, unsigned). Link: https://lore.kernel.org/r/20210917212314.2362324-1-bvanassche@acm.org Fixes: 5795eb44 ("scsi: sd_zbc: emulate ZONE_APPEND commands") Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Adrian Hunter authored
This reverts commit a113eaaf. There are a couple of issues with the commit: 1. It causes deadlocks. 2. It causes the shost->eh_cmd_q list of failed requests not to be processed, ever. So revert it. 1. Deadlocks The SCSI error handler runs with requests blocked beginning when scsi_schedule_eh() sets SHOST_RECOVERY state, continuing through scsi_error_handler() callback ->eh_strategy_handler() until scsi_restart_operations() is called. By setting eh_strategy_handler to ufshcd_err_handler, the patch changed the UFS error handler to run with requests blocked, including PM requests, for the entire run of the error handler. That conflicts with UFS error handler existing synchronization with UFS device PM operations. The UFS error handler synchronizes with runtime PM by doing pm_runtime_get_sync() prior to blocking requests itself. It synchronizes with system PM by use of hba->host_sem, again before blocking requests itself. However, if requests are already blocked, then PM operations will block. So: the UFS error handler blocks waiting on PM + PM blocks waiting on SCSI PM requests to process or fail + PM requests are blocked waiting on error handling to finish = deadlock This happens both for runtime PM and system PM. Prior to the patch, these deadlocks could not happen even if SCSI error handling was running, because the presence of requests in shost->eh_cmd_q would mean the queues could not be suspended, which would mean that, should the UFS error handler run at the same time, it would not need to wait for PM or vice versa. Please note these scenarios are not just theoretical, they were found during testing on a Samsung Galaxy Book S. 2. ->eh_strategy_handler() must process shost->eh_cmd_q list of failed requests, as all other eh_strategy_handler's do except UFS error handler. Refer for example: scsi_unjam_host(), ata_scsi_error() and sas_scsi_recover_host(). Link: https://lore.kernel.org/r/20210917144349.14058-1-adrian.hunter@intel.com Fixes: a113eaaf ("scsi: ufs: Synchronize SCSI and UFS error handling") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 14 Sep, 2021 16 commits
-
-
Zenghui Yu authored
device_initialize() is used to take a refcount on the device. However, put_device() is not called during device teardown. This leads to a leak of private data of the driver core, dev_name(), etc. This is reported by kmemleak at boot time if we compile kernel with DEBUG_TEST_DRIVER_REMOVE. Fix memory leaks during unregistration and implement a release function. Link: https://lore.kernel.org/r/20210911105306.1511-1-yuzenghui@huawei.com Fixes: ead09dd3 ("scsi: bsg: Simplify device registration") Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Heiner Kallweit authored
sd_spinup_disk() is a little bit noisy after commit 848ade90 ("scsi: sd: Do not exit sd_spinup_disk() quietly"): scsi 0:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Media removed, stopped polling sd 0:0:0:0: [sda] Media removed, stopped polling sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: [sda] Media removed, stopped polling There's not really a benefit in printing the same message multiple times. Therefore print it only if media_present was previously set. Link: https://lore.kernel.org/r/a2d0a249-6035-9697-626a-e14ec50ef6ee@gmail.comReviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Adrian Hunter authored
Intel LKF can experience link errors. Make fixes to increase link stability, especially when switching to high speed modes. Link: https://lore.kernel.org/r/20210831145317.26306-1-adrian.hunter@intel.com Fixes: b2c57925 ("scsi: ufs: ufs-pci: Add support for Intel LKF") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
There are a couple of statements where the indentation is not correct, clean these up. Remove a redundant break statement. Link: https://lore.kernel.org/r/20210902224215.57286-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
There are a few statements where the indentation is not correct, clean these up. Link: https://lore.kernel.org/r/20210902223643.56979-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
There is a spelling mistake in a literal string. Fix it. Link: https://lore.kernel.org/r/20210826115714.11844-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Jens Axboe authored
There's little point in keeping this one separately maintained these days, so just remove the entry and it'll fall under the SCSI subsystem where it belongs. Link: https://lore.kernel.org/r/c5e12bd1-10de-634c-d6b3-dac79ed01af5@kernel.dkSigned-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
jing yangyang authored
WARNING !A || A && B is equivalent to !A || B This issue was detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20210820030805.12383-1-jing.yangyang@zte.com.cnReported-by: Zeal Robot <zealci@zte.com.cn> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Helge Deller authored
Drop retrieve_from_waiting_list() to avoid this warning: drivers/scsi/ncr53c8xx.c:8000:26: warning: ‘retrieve_from_waiting_list’ defined but not used [-Wunused-function] Link: https://lore.kernel.org/r/YTfS/LH5vCN6afDW@ls3530 Fixes: 1c22e327 ("scsi: ncr53c8xx: Remove unused code") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Smatch checker reported the following error: drivers/base/power/sysfs.c:833 dpm_sysfs_remove() warn: sleeping in atomic context With a calling sequence of: efct_lio_npiv_drop_nport() <- disables preempt -> fc_vport_terminate() -> device_del() -> dpm_sysfs_remove() Issue is efct_lio_npiv_drop_nport() is making the fc_vport_terminate() call while holding a lock w/ ipl raised. It is unnecessary to hold the lock over this call, shift where the lock is taken. Link: https://lore.kernel.org/r/20210907165225.10821-1-jsmart2021@gmail.comReported-by: Dan Carpenter <dan.carpenter@oracle.com> Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com> Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Maurizio Lombardi authored
Commit 356ba2a8 ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") introduced support for changeable alua_support and pgr_support target attributes. These can only be changed if the backstore is user-backed, otherwise the kernel returns -EINVAL. This triggers a warning in the targetcli/rtslib code when performing a target restore that includes non-userbacked backstores: # targetctl restore Storage Object block/storage1: Cannot set attribute alua_support: [Errno 22] Invalid argument, skipped Storage Object block/storage1: Cannot set attribute pgr_support: [Errno 22] Invalid argument, skipped Fix this warning by returning an error code only if we are really going to flip the PGR/ALUA bit in the transport_flags field, otherwise we will do nothing and return success. Return ENOSYS instead of EINVAL if the pgr/alua attributes can not be changed, this way it will be possible for userspace to understand if the operation failed because an invalid value has been passed to strtobool() or because the attributes are fixed. Fixes: 356ba2a8 ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") Link: https://lore.kernel.org/r/20210906151809.52811-1-mlombard@redhat.comReviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Naohiro Aota authored
Reporting zones on a SCSI device sometimes fail with the following error: [76248.516390] ata16.00: invalid transfer count 131328 [76248.523618] sd 15:0:0:0: [sda] REPORT ZONES start lba 536870912 failed The error (from drivers/ata/libata-scsi.c:ata_scsi_zbc_in_xlat()) indicates that buffer size is not aligned to SECTOR_SIZE. This happens when the __vmalloc() failed. Consider we are reporting 4096 zones, then we will have "bufsize = roundup((4096 + 1) * 64, SECTOR_SIZE)" = (513 * 512) = 262656. Then, __vmalloc() failure halves the bufsize to 131328, which is no longer aligned to SECTOR_SIZE. Use rounddown() to ensure the size is always aligned to SECTOR_SIZE and fix the comment as well. Link: https://lore.kernel.org/r/20210906140642.2267569-1-naohiro.aota@wdc.com Fixes: 23a50861 ("scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()") Cc: stable@vger.kernel.org # 5.5+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Ming Lei authored
After a device is initialized via device_initialize() it should be freed via put_device(). sd_probe() currently gets this wrong, fix it up. Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.comReviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Sreekanth Reddy authored
Call cpu_relax() while waiting for the current blk-mq polling instance to complete. Link: https://lore.kernel.org/r/20210901152542.27866-1-sreekanth.reddy@broadcom.comReviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Baokun Li authored
ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call into the driver, we might not match and return that we don't want attr visible in sysfs. Found in code review. Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com Fixes: e746f345 ("scsi: iscsi: Fix iface sysfs attr detection") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
ChanWoo Lee authored
The following parameters are not used in the function. Remove them. *func(): ufshpb_set_hpb_read_to_upiu -> struct ufshpb_lu *hpb -> u32 lpn Link: https://lore.kernel.org/r/20210901025617.31174-1-cw9316.lee@samsung.comReviewed-by: Daejun Park <daejun7.park@samsung.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-