ePAPR represents hardware threads as cpu node properties in device tree.
So with existing QEMU, hardware threads are simply exposed as vcpus with
one hardware thread.

The e6500 core shares TLBs between hardware threads. Without tlb write
conditional instruction, the Linux kernel uses per core mechanisms to
protect against duplicate TLB entries.

The guest is unable to detect real siblings threads, so it can't use the
TLB protection mechanism. An alternative solution is to use the hypervisor
to allocate different lpids to guest's vcpus that runs simultaneous on real
siblings threads. On systems with two threads per core this patch halves
the size of the lpid pool that the allocator sees and use two lpids per VM.
Use even numbers to speedup vcpu lpid computation with consecutive lpids
per VM: vm1 will use lpids 2 and 3, vm2 lpids 4 and 5, and so on.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
[agraf: fix spelling]
Signed-off-by: Alexander Graf <agraf@suse.de>

Since the guest can read the machine's PVR (Processor Version Register)
directly and see the real value, we should disallow userspace from
setting any value for the guest's PVR other than the real host value.
Therefore this makes kvm_arch_vcpu_set_sregs_hv() check the supplied
PVR value and return an error if it is different from the host value,
which has been put into vcpu->arch.pvr at vcpu creation time.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

Occasional failures have been seen with split-core mode and migration
where the message "KVM: couldn't grab cpu" appears.  This increases
the length of time that we wait from 1ms to 10ms, which seems to
work around the issue.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

We currently decide at compile-time which of the SPE or AltiVec units to
support exclusively. Guard kernel defines with CONFIG_SPE_POSSIBLE and
CONFIG_PPC_E500MC and remove shared defines.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Powerpc timer implementation is a copycat version of s390. Now that they removed
the tasklet with commit ea74c0ea follow this
optimization.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

This patch emulates debug registers and debug exception
to support guest using debug resource. This enables running
gdb/kgdb etc in guest.

On BOOKE architecture we cannot share debug resources between QEMU and
guest because:
    When QEMU is using debug resources then debug exception must
    be always enabled. To achieve this we set MSR_DE and also set
    MSRP_DEP so guest cannot change MSR_DE.

    When emulating debug resource for guest we want guest
    to control MSR_DE (enable/disable debug interrupt on need).

    So above mentioned two configuration cannot be supported
    at the same time. So the result is that we cannot share
    debug resources between QEMU and Guest on BOOKE architecture.

In the current design QEMU gets priority over guest, this means that if
QEMU is using debug resources then guest cannot use them and if guest is
using debug resource then QEMU can overwrite them.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Move ONE_REG AltiVec support to powerpc generic layer.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Make ONE_REG generic for server and embedded architectures by moving
kvm_vcpu_ioctl_get_one_reg() and kvm_vcpu_ioctl_set_one_reg() functions
to powerpc layer.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Add AltiVec support in KVM for Book3e. FPU support gracefully reuse host
infrastructure so follow the same approach for AltiVec.

Book3e specification defines shared interrupt numbers for SPE and AltiVec
units. Still SPE is present in e200/e500v2 cores while AltiVec is present in
e6500 core. So we can currently decide at compile-time which of the SPE or
AltiVec units to support exclusively by using CONFIG_SPE_POSSIBLE and
CONFIG_PPC_E500MC defines. As Alexander Graf suggested, keep SPE and AltiVec
exception handlers distinct to improve code readability.

Guests have the privilege to enable AltiVec, so we always need to support
AltiVec in KVM and implicitly in host to reflect interrupts and to save/restore
the unit context. KVM will be loaded on cores with AltiVec unit only if
CONFIG_ALTIVEC is defined. Use this define to guard KVM AltiVec logic.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Increase FPU laziness by loading the guest state into the unit before entering
the guest instead of doing it on each vcpu schedule. Without this improvement
an interrupt may claim floating point corrupting guest state.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

This was missed in respective one_reg implementation patch.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Add 'r' to register name r2 in kvmppc_hv_enter.

Also update comment at the top of kvmppc_hv_enter to indicate that R2/TOC is
non-volatile.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

Book3E specification defines shared interrupt numbers for SPE and AltiVec
units. Still SPE is present in e200/e500v2 cores while AltiVec is present in
e6500 core. So we can currently decide at compile-time which unit to support
exclusively. As Alexander Graf suggested, this will improve code readability
especially in KVM.

Use distinct defines to identify SPE/AltiVec interrupt numbers, reverting
c58ce397 and 6b310fc5 patches that added common defines.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

SPE exception handlers are now defined for 32-bit e500mc cores even though
SPE unit is not present and CONFIG_SPE is undefined.

Restrict SPE exception handlers to e200/e500 cores adding CONFIG_SPE_POSSIBLE
and consequently guard __stup_ivors and __setup_cpu functions.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Guest visible debug register and hardware visible debug registers are
same, so ther is no need to have arch->shadow_dbg_reg, instead use
arch->dbg_reg.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Dbsr is not visible to userspace and we do not think any need to
expose this to userspace because:
  Userspace cannot inject debug interrupt to guest (as this
  does not know guest ability to handle debug interrupt), so
  userspace will always clear DBSR.
  Now if userspace has to always clear DBSR in KVM_EXIT_DEBUG
  handling then clearing dbsr in kernel looks simple as this
  avoid doing SET_SREGS/set_one_reg() to clear DBSR
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

This patch changes the default behavior of MSRP_DEP, that is
guest is not allowed to change the MSR_DE, to guest can change
MSR_DE. When userspace is debugging guest then it override the
default behavior and set MSRP_DEP. This stops guest to change
MSR_DE when userspace is debugging guest.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

This patch adds "rfdi" instruction emulation which is required for
guest debug hander on BOOKE-HV
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Debug interrupt can be either "critical level" or "debug level".
There are separate set of save/restore registers used for different level.
Example: DSRR0/DSRR1 are used for "debug level" and CSRR0/CSRR1
are used for critical level debug interrupt.

Using CPU_FTR_DEBUG_LVL_EXC to decide which interrupt level to be used.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

In init_rmode_identity_map(), there two variables indicating the return
value, r and ret, and it return 0 on error, 1 on success. The function
is only called by vmx_create_vcpu(), and ret is redundant.

This patch removes the redundant variable, and makes init_rmode_identity_map()
return 0 on success, -errno on failure.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_arch->ept_identity_pagetable holds the ept identity pagetable page. But
it is never used to refer to the page at all.

In vcpu initialization, it indicates two things:
1. indicates if ept page is allocated
2. indicates if a memory slot for identity page is initialized

Actually, kvm_arch->ept_identity_pagetable_done is enough to tell if the ept
identity pagetable is initialized. So we can remove ept_identity_pagetable.

NOTE: In the original code, ept identity pagetable page is pinned in memroy.
      As a result, it cannot be migrated/hot-removed. After this patch, since
      kvm_arch->ept_identity_pagetable is removed, ept identity pagetable page
      is no longer pinned in memory. And it can be migrated/hot-removed.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Gleb Natapov <gleb@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Now that we have a dynamic means to register kvm_device_ops, use that
for the VFIO kvm device, instead of relying on the static table.

This is achieved by a module_init call to register the ops with KVM.

Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alex Williamson <Alex.Williamson@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Using the new kvm_register_device_ops() interface makes us get rid of
an #ifdef in common code.

Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Now that we have a dynamic means to register kvm_device_ops, use that
for the ARM VGIC, instead of relying on the static table.

Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_ioctl_create_device currently has knowledge of all the device types
and their associated ops. This is fairly inflexible when adding support
for new in-kernel device emulations, so move what we currently have out
into a table, which can support dynamic registration of ops by new
drivers for virtual hardware.

Cc: Alex Williamson <Alex.Williamson@redhat.com>
Cc: Alex Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Currently, we call ioapic_service() immediately when we find the irq is still
active during eoi broadcast. But for real hardware, there's some delay between
the EOI writing and irq delivery.  If we do not emulate this behavior, and
re-inject the interrupt immediately after the guest sends an EOI and re-enables
interrupts, a guest might spend all its time in the ISR if it has a broken
handler for a level-triggered interrupt.

Such livelock actually happens with Windows guests when resuming from
hibernation.

As there's no way to recognize the broken handle from new raised ones, this patch
delays an interrupt if 10.000 consecutive EOIs found that the interrupt was
still high.  The guest can then make a little forward progress, until a proper
IRQ handler is set or until some detection routine in the guest (such as
Linux's note_interrupt()) recognizes the situation.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This patch replace the set_bit method by kvm_make_request
to make code more readable and consistent.
Signed-off-by: Guo Hui Liu <liuguohui@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Initially the tracepoint was added only to the APIC_DM_FIXED case,
also because it reported coalesced interrupts that only made sense
for that case.  However, the coalesced argument is not used anymore
and tracing other delivery modes is useful, so hoist the call out
of the switch statement.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We have APIC_DEFAULT_PHYS_BASE defined as 0xfee00000, which is also the address of
apic access page. So use this macro.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Gleb Natapov <gleb@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-20140910' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next

KVM: s390: Fixes and features for next (3.18)

1. Crypto/CPACF support: To enable the MSA4 instructions we have to
   provide a common control structure for each SIE control block
2. Two cleanups found by a static code checker: one redundant assignment
   and one useless if
3. Fix the page handling of the diag10 ballooning interface. If the
   guest freed the pages at absolute 0 some checks and frees were
   incorrect
4. Limit guests to 16TB
5. Add __must_check to interrupt injection code

r is already initialized to 0.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>

The old handling of prefix pages was broken in the diag10 ballooner.
We now rely on gmap_discard to check for start > end and do a
slow path if the prefix swap pages are affected:
1. discard the pages from start to prefix
2. discard the absolute 0 pages
3. discard the pages after prefix swap to end
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>

Due to the earlier check we know that ipte_lock_count must be 0.
No need to add a useless if. Let's make clear that we are going
to always wakeup when we execute that code.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>

We must not fallthrough if the conditions for external call are not met.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org

Currently we fill up a full 5 level page table to hold the guest
mapping. Since commit "support gmap page tables with less than 5
levels" we can do better.
Having more than 4 TB might be useful for some testing scenarios,
so let's just limit ourselves to 16TB guest size.
Having more than that is totally untested as I do not have enough
swap space/memory.

We continue to allow ucontrol the full size.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

We now propagate interrupt injection errors back to the ioctl. We
should mark functions that might fail with __must_check.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Jens Freimann <jfrei@linux.vnet.ibm.com>

We have to provide a per guest crypto block for the CPUs to
enable MSA4 instructions. According to icainfo on z196 or
later this enables CCM-AES-128, CMAC-AES-128, CMAC-AES-192
and CMAC-AES-256.
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split MSA4/protected key into two patches]

It looks like when this was initially merged it got accidentally included
in the following section. I've just moved it back in the correct section
and re-numbered it as other ioctls have been added since.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In preparation for working on the ARM implementation I noticed the debug
interface was missing from the API document. I've pieced together the
expected behaviour from the code and commit messages written it up as
best I can.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>