'soc' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:

  exynos_tmu.c:890:14: error: cast to smaller integer type 'enum soc_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230810091318.70261-1-krzysztof.kozlowski@linaro.org

The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230809101439.2663042-1-ruanjinjie@huawei.com

Referring to platform_get_irq()'s definition, the return value has
already been checked if ret < 0, and printed via dev_err_probe().
Calling dev_err_probe() one more time outside platform_get_irq()
is obviously redundant.

Removing dev_err_probe() outside platform_get_irq() to clean up
above problem.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230802094527.988842-1-chenjiahao16@huawei.com

The sun8i thermal driver reads calibration data via the nvmem API at
startup, updating the device configuration and not referencing the data
again.  Rather than explicitly freeing the nvmem data the driver relies
on devm_ to release it, even though the data is never referenced again.
The allocation is still tracked so it's not leaked but this is notable
when looking at the code and is a little wasteful so let's instead
explicitly free the nvmem after we're done with it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230719-thermal-sun8i-free-nvmem-v1-1-f553d5afef79@kernel.org

It's redundant, let's remove it.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230626125515.18830-1-frank.li@vivo.com

This patch fixes the following sparse warnings:

drivers/thermal/qcom/tsens-v1.c:24:40: sparse: warning: symbol 'tsens_qcs404_nvmem' was not declared. Should it be static?
drivers/thermal/qcom/tsens-v0_1.c:26:40: sparse: warning: symbol 'tsens_8916_nvmem' was not declared. Should it be static?
drivers/thermal/qcom/tsens-v0_1.c:42:40: sparse: warning: symbol 'tsens_8974_nvmem' was not declared. Should it be static?
drivers/thermal/qcom/tsens-v0_1.c:64:40: sparse: warning: symbol 'tsens_8974_backup_nvmem' was not declared. Should it be static?

No functional change intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230713160415.149381-1-minhuadotchen@gmail.com

nvmem_cell_read_u32() may return -EPROBE_DEFER if NVMEM supplier has not
yet been probed. Future reprobe may succeed, so printing:

  i.mx8mm_thermal 30260000.tmu: Failed to read OCOTP nvmem cell (-517).

to the log is confusing. Fix this by using dev_err_probe. This also
elevates the message from warning to error, which is more correct: The
log message is only ever printed in probe error path and probe aborts
afterwards, so it really warrants an error-level message.

Fixes: 40329164 ("thermal/drivers/imx: Add support for loading calibration data from OCOTP")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230708112647.2897294-1-a.fatoum@pengutronix.de

The documentation says "If an error occurs, ERR_PTR(-ERROR) will be
returned" but the current code checks against a NULL pointer returned.

Fix this by checking if IS_ERR().
Signed-off-by: Minjie Du <duminjie@vivo.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230713042413.2519-1-duminjie@vivo.com

Each LVTS thermal controller can have up to four sensors, each capable
of triggering its own interrupt when its measured temperature crosses
the configured threshold. The threshold for each sensor is handled
separately by the thermal framework, since each one is registered with
its own thermal zone and trips. However, the temperature thresholds are
configured on the controller, and therefore are shared between all
sensors on that controller.

When the temperature measured by the sensors is different enough to
cause the thermal framework to configure different thresholds for each
one, interrupts start triggering on sensors outside the last threshold
configured.

To address the issue, track the thresholds required by each sensor and
only actually set the highest one in the hardware, and disable
interrupts for all sensors outside the current configured range.

Fixes: f5f633b1 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-7-nfraprado@collabora.com

The thermal framework might leave the low threshold unset if there
aren't any lower trip points. This leaves the register zeroed, which
translates to a very high temperature for the low threshold. The
interrupt for this threshold is then immediately triggered, and the
state machine gets stuck, preventing any other temperature monitoring
interrupts to ever trigger.

(The same happens by not setting the Cold or Hot to Normal thresholds
when using those)

Set the unused threshold to a valid low value. This value was chosen so
that for any valid golden temperature read from the efuse, when the
value is converted to raw and back again to milliCelsius, the result
doesn't underflow.

Fixes: f5f633b1 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-6-nfraprado@collabora.com

Out of the many interrupts supported by the hardware, the only ones of
interest to the driver currently are:
* The temperature went over the high offset threshold, for any of the
  sensors
* The temperature went below the low offset threshold, for any of the
  sensors
* The temperature went over the stage3 threshold

These are the only thresholds configured by the driver through the
OFFSETH, OFFSETL, and PROTTC registers, respectively.

The current interrupt mask in LVTS_MONINT_CONF, enables many more
interrupts, including data ready on sensors for both filtered and
immediate mode. These are not only not handled by the driver, but they
are also triggered too often, causing unneeded overhead. Disable these
unnecessary interrupts.

The meaning of each bit can be seen in the comment describing
LVTS_MONINTST in the IRQ handler.

Fixes: f5f633b1 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-5-nfraprado@collabora.com

There are two kinds of temperature monitoring interrupts available:
* High Offset, Low Offset
* Hot, Hot to normal, Cold

The code currently uses the hot/h2n/cold interrupts, however in a way
that doesn't work: the cold threshold is left uninitialized, which
prevents the other thresholds from ever triggering, and the h2n
interrupt is used as the lower threshold, which prevents the hot
interrupt from triggering again after the thresholds are updated by the
thermal framework, since a hot interrupt can only trigger again after
the hot to normal interrupt has been triggered.

But better yet than addressing those issues, is to use the high/low
offset interrupts instead. This way only two thresholds need to be
managed, which have a simpler state machine, making them a better match
to the thermal framework's high and low thresholds.

Fixes: f5f633b1 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-4-nfraprado@collabora.com

Each controller can be configured to operate on immediate or filtered
mode. On filtered mode, the sensors are enabled by setting the
corresponding bits in MONCTL0, while on immediate mode, by setting
MSRCTL1.

Previously, the code would set MSRCTL1 for all four sensors when
configured to immediate mode, but given that the controller might not
have all four sensors connected, this would cause interrupts to trigger
for non-existent sensors. Fix this by handling the MSRCTL1 register
analogously to the MONCTL0: only enable the sensors that were declared.

Fixes: f5f633b1 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-3-nfraprado@collabora.com

There is a single IRQ handler for each LVTS thermal domain, and it is
supposed to check each of its underlying controllers for the origin of
the interrupt and clear its status. However due to a typo, only the
first controller was ever being handled, which resulted in the interrupt
never being cleared when it happened on the other controllers. Add the
missing index so interrupts are handled for all controllers.

Fixes: f5f633b1 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-2-nfraprado@collabora.com

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Since commit 3d439b1a ("thermal/core: Alloc-copy-free the thermal
zone parameters structure"), thermal_zone_device_register() allocates
a copy of the tzp argument and frees it when unregistering, so
thermal_of_zone_register() now ends up leaking its original tzp and
double-freeing the tzp copy. Fix this by locating tzp on stack instead.

Fixes: 3d439b1a ("thermal/core: Alloc-copy-free the thermal zone parameters structure")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: 6.4+ <stable@vger.kernel.org> # 6.4+: 8bcbb18c61d6: thermal: core: constify params in thermal_zone_device_register
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Since commit 3d439b1a ("thermal/core: Alloc-copy-free the thermal zone
parameters structure"), thermal_zone_device_register() allocates a copy
of the tzp argument and callers need not explicitly manage its lifetime.

This means the function no longer cares about the parameter being
mutable, so constify it.

No functional change.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull tracing fixes from Steven Rostedt:

 - Swapping the ring buffer for snapshotting (for things like irqsoff)
   can crash if the ring buffer is being resized. Disable swapping when
   this happens. The missed swap will be reported to the tracer

 - Report error if the histogram fails to be created due to an error in
   adding a histogram variable, in event_hist_trigger_parse()

 - Remove unused declaration of tracing_map_set_field_descr()

* tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/histograms: Return an error if we fail to add histogram to hist_vars list
  ring-buffer: Do not swap cpu_buffer during resize process
  tracing: Remove unused extern declaration tracing_map_set_field_descr()

Merge tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix stale help text in gconfig

 - Support *.S files in compile_commands.json

 - Flatten KBUILD_CFLAGS

 - Fix external module builds with Rust so that temporary files are
   created in the modules directories instead of the kernel tree

* tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: rust: avoid creating temporary files
  kbuild: flatten KBUILD_CFLAGS
  gen_compile_commands: add assembly files to compilation database
  kconfig: gconfig: correct program name in help text
  kconfig: gconfig: drop the Show Debug Info help text

`rustc` outputs by default the temporary files (i.e. the ones saved
by `-Csave-temps`, such as `*.rcgu*` files) in the current working
directory when `-o` and `--out-dir` are not given (even if
`--emit=x=path` is given, i.e. it does not use those for temporaries).

Since out-of-tree modules are compiled from the `linux` tree,
`rustc` then tries to create them there, which may not be accessible.

Thus pass `--out-dir` explicitly, even if it is just for the temporary
files.

Similarly, do so for Rust host programs too.
Reported-by: Raphael Nestler <raphael.nestler@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1015Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs
Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs
Fixes: 295d8398 ("kbuild: specify output names separately for each emission type from rustc")
Cc: stable@vger.kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Avoid pKVM finalization if KVM initialization fails

   - Add missing BTI instructions in the hypervisor, fixing an early
     boot failure on BTI systems

   - Handle MMU notifiers correctly for non hugepage-aligned memslots

   - Work around a bug in the architecture where hypervisor timer
     controls have UNKNOWN behavior under nested virt

   - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel
     BUG in cpu hotplug resulting from per-CPU accessor sanity checking

   - Make WFI emulation on GICv4 systems robust w.r.t. preemption,
     consistently requesting a doorbell interrupt on vcpu_put()

   - Uphold RES0 sysreg behavior when emulating older PMU versions

   - Avoid macro expansion when initializing PMU register names,
     ensuring the tracepoints pretty-print the sysreg

  s390:

   - Two fixes for asynchronous destroy

  x86 fixes will come early next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: pv: fix index value of replaced ASCE
  KVM: s390: pv: simplify shutdown and fix race
  KVM: arm64: Fix the name of sys_reg_desc related to PMU
  KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
  KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
  KVM: arm64: Add missing BTI instructions
  KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
  KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
  KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
  KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits

Pull ext4 fixes from Ted Ts'o:
 "Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's
  checkpoint code"

* tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
  ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()
  ext4: correct inline offset when handling xattrs in inode body
  jbd2: remove __journal_try_to_free_buffer()
  jbd2: fix a race when checking checkpoint buffer busy
  jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
  jbd2: remove journal_clean_one_cp_list()
  jbd2: remove t_checkpoint_io_list
  jbd2: recheck chechpointing non-dirty buffer

Pull smb client fix from Steve French:
 "Add minor debugging improvement.

  The change improves ability to read a network trace to debug problems
  on encrypted connections which are very common (e.g. using wireshark
  or tcpdump).

  That works today with tools like 'smbinfo keys /mnt/file' but requires
  passing in a filename on the mount (see e.g. [1]), but it often makes
  more sense to just pass in the mount point path (ie a directory not a
  filename).

  So this fix was needed to debug some types of problems (an obvious
  example is on an encrypted connection failing operations on an empty
  share or with no files in the root of the directory) - so you can
  simply pass in the 'smbinfo keys <mntpoint>' and get the information
  that wireshark needs"

Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1]

* tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: allow dumping keys for directories too

Merge tag 'kvm-s390-master-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

Two fixes for asynchronous destroy

Merge tag 'kvmarm-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.5, part #1

 - Avoid pKVM finalization if KVM initialization fails

 - Add missing BTI instructions in the hypervisor, fixing an early boot
   failure on BTI systems

 - Handle MMU notifiers correctly for non hugepage-aligned memslots

 - Work around a bug in the architecture where hypervisor timer controls
   have UNKNOWN behavior under nested virt.

 - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
   in cpu hotplug resulting from per-CPU accessor sanity checking.

 - Make WFI emulation on GICv4 systems robust w.r.t. preemption,
   consistently requesting a doorbell interrupt on vcpu_put()

 - Uphold RES0 sysreg behavior when emulating older PMU versions

 - Avoid macro expansion when initializing PMU register names, ensuring
   the tracepoints pretty-print the sysreg.

Commit 6018b585 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.

Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com

Cc: stable@vger.kernel.org
Fixes: 6018b585 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When ring_buffer_swap_cpu was called during resize process,
the cpu buffer was swapped in the middle, resulting in incorrect state.
Continuing to run in the wrong state will result in oops.

This issue can be easily reproduced using the following two scripts:
/tmp # cat test1.sh
//#! /bin/sh
for i in `seq 0 100000`
do
         echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb
         sleep 0.5
         echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb
         sleep 0.5
done
/tmp # cat test2.sh
//#! /bin/sh
for i in `seq 0 100000`
do
        echo irqsoff > /sys/kernel/debug/tracing/current_tracer
        sleep 1
        echo nop > /sys/kernel/debug/tracing/current_tracer
        sleep 1
done
/tmp # ./test1.sh &
/tmp # ./test2.sh &

A typical oops log is as follows, sometimes with other different oops logs.

[  231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8
[  231.713375] Modules linked in:
[  231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.5.0-rc1-00276-g20edcec2 #15
[  231.716750] Hardware name: linux,dummy-virt (DT)
[  231.718152] Workqueue: events update_pages_handler
[  231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  231.721171] pc : rb_update_pages+0x378/0x3f8
[  231.722212] lr : rb_update_pages+0x25c/0x3f8
[  231.723248] sp : ffff800082b9bd50
[  231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000
[  231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0
[  231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a
[  231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000
[  231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510
[  231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002
[  231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558
[  231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001
[  231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000
[  231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208
[  231.744196] Call trace:
[  231.744892]  rb_update_pages+0x378/0x3f8
[  231.745893]  update_pages_handler+0x1c/0x38
[  231.746893]  process_one_work+0x1f0/0x468
[  231.747852]  worker_thread+0x54/0x410
[  231.748737]  kthread+0x124/0x138
[  231.749549]  ret_from_fork+0x10/0x20
[  231.750434] ---[ end trace 0000000000000000 ]---
[  233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  233.721696] Mem abort info:
[  233.721935]   ESR = 0x0000000096000004
[  233.722283]   EC = 0x25: DABT (current EL), IL = 32 bits
[  233.722596]   SET = 0, FnV = 0
[  233.722805]   EA = 0, S1PTW = 0
[  233.723026]   FSC = 0x04: level 0 translation fault
[  233.723458] Data abort info:
[  233.723734]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[  233.724176]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[  233.724589]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[  233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000
[  233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[  233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[  233.726720] Modules linked in:
[  233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.5.0-rc1-00276-g20edcec2 #15
[  233.727777] Hardware name: linux,dummy-virt (DT)
[  233.728225] Workqueue: events update_pages_handler
[  233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  233.729054] pc : rb_update_pages+0x1a8/0x3f8
[  233.729334] lr : rb_update_pages+0x154/0x3f8
[  233.729592] sp : ffff800082b9bd50
[  233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000
[  233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418
[  233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003
[  233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58
[  233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001
[  233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000
[  233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c
[  233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0
[  233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000
[  233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000
[  233.734418] Call trace:
[  233.734593]  rb_update_pages+0x1a8/0x3f8
[  233.734853]  update_pages_handler+0x1c/0x38
[  233.735148]  process_one_work+0x1f0/0x468
[  233.735525]  worker_thread+0x54/0x410
[  233.735852]  kthread+0x124/0x138
[  233.736064]  ret_from_fork+0x10/0x20
[  233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060)
[  233.736959] ---[ end trace 0000000000000000 ]---

After analysis, the seq of the error is as follows [1-5]:

int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
			int cpu_id)
{
	for_each_buffer_cpu(buffer, cpu) {
		cpu_buffer = buffer->buffers[cpu];
		//1. get cpu_buffer, aka cpu_buffer(A)
		...
		...
		schedule_work_on(cpu,
		 &cpu_buffer->update_pages_work);
		//2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to
		// update_pages_handler, do the update process, set 'update_done' in
		// complete(&cpu_buffer->update_done) and to wakeup resize process.
	//---->
		//3. Just at this moment, ring_buffer_swap_cpu is triggered,
		//cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer.
		//ring_buffer_swap_cpu is called as the 'Call trace' below.

		Call trace:
		 dump_backtrace+0x0/0x2f8
		 show_stack+0x18/0x28
		 dump_stack+0x12c/0x188
		 ring_buffer_swap_cpu+0x2f8/0x328
		 update_max_tr_single+0x180/0x210
		 check_critical_timing+0x2b4/0x2c8
		 tracer_hardirqs_on+0x1c0/0x200
		 trace_hardirqs_on+0xec/0x378
		 el0_svc_common+0x64/0x260
		 do_el0_svc+0x90/0xf8
		 el0_svc+0x20/0x30
		 el0_sync_handler+0xb0/0xb8
		 el0_sync+0x180/0x1c0
	//<----

	/* wait for all the updates to complete */
	for_each_buffer_cpu(buffer, cpu) {
		cpu_buffer = buffer->buffers[cpu];
		//4. get cpu_buffer, cpu_buffer(B) is used in the following process,
		//the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong.
		//for example, cpu_buffer(A)->update_done will leave be set 1, and will
		//not 'wait_for_completion' at the next resize round.
		  if (!cpu_buffer->nr_pages_to_update)
			continue;

		if (cpu_online(cpu))
			wait_for_completion(&cpu_buffer->update_done);
		cpu_buffer->nr_pages_to_update = 0;
	}
	...
}
	//5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong,
	//Continuing to run in the wrong state, then oops occurs.

Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cnSigned-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Since commit 08d43a5f ("tracing: Add lock-free tracing_map"),
this is never used, so can be removed.

Link: https://lore.kernel.org/linux-trace-kernel/20230722032123.24664-1-yuehaibing@huawei.com

Cc: <mhiramat@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Make it slightly easier to see which compiler options are added and
removed (and not worry about column limit too!).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Like C source files, tooling can find it useful to have the assembly
source file compilation recorded.

The .S extension appears to used across all architectures.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.

To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:

  1. It must have it's logical start immediately to the left of
  (ie less than) original logical start.

  2. It must not be deleted

To find this pa we use the following traversal method:

1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.

2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.

3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.

4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.

This approach also takes care of having deleted PAs in the tree.

(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)

[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/

Cc: stable@kernel.org # 6.4
Fixes: 38727786 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

In ext4_mb_choose_next_group_best_avail(), we want the start order to be
1 less than goal length and the min_order to be, at max, 1 more than the
original length. This commit fixes an off by one issue that arose due to
the fact that 1 << fls(n) > (n).

After all the processing:

order = 1 order below goal len
min_order = maximum of the three:-
             - order - trim_order
             - 1 order below B2C(s_stripe)
             - 1 order above original len

Cc: stable@kernel.org
Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted.  This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied.  If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region.  The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.

Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull powerpc fixes from Michael Ellerman:

 - Reinstate support for little endian ELFv1 binaries, which it turns
   out still exist in the wild.

 - Revert a change which used asm goto for WARN_ON/__WARN_FLAGS, as it
   lead to dead code generation and seemed to trigger compiler bugs in
   some edge cases.

 - Fix a deadlock in the pseries VAS code, between live migration and
   the driver's mmap handler.

 - Disable KCOV instrumentation in the powerpc KASAN code.

Thanks to Andrew Donnellan, Benjamin Gray, Christophe Leroy, Haren
Myneni, Russell Currey, and Uwe Kleine-König.

* tag 'powerpc-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc/64s: Remove support for ELFv1 little endian userspace"
  powerpc/kasan: Disable KCOV in KASAN code
  powerpc/512x: lpbfifo: Convert to platform remove callback returning void
  powerpc/crypto: Add gitignore for generated P10 AES/GCM .S files
  Revert "powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm goto"
  powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close

From 2.43 to 2.44
Signed-off-by: Steve French <stfrench@microsoft.com>

Dumping the enc/dec keys is a session wide operation.
And it should not matter if the ioctl was run on
a regular file or a directory.

Currently, we obtain the tcon pointer from the
cifs file handle. But since there's no dir open call
in cifs, this is not populated for dirs.

This change allows dumping of session keys using ioctl
even for directories. To do this, we'll now get the
tcon pointer from the superblock, and not from the file
handle.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull s390 fixes from Heiko Carstens:

 - Fix per vma lock fault handling: add missing !(fault & VM_FAULT_ERROR)
   check to fault handler to prevent error handling for return values
   that don't indicate an error

 - Use kfree_sensitive() instead of kfree() in paes crypto code to clear
   memory that may contain keys before freeing it

 - Fix reply buffer size calculation for CCA replies in zcrypt device
   driver

* tag 's390-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: fix reply buffer calculations for CCA replies
  s390/crypto: use kfree_sensitive() instead of kfree()
  s390/mm: fix per vma lock fault handling

Pull block fixes from Jens Axboe:

 - Fix for loop regressions (Mauricio)

 - Fix a potential stall with batched wakeups in sbitmap (David)

 - Fix for stall with recursive plug flushes (Ross)

 - Skip accounting of empty requests for blk-iocost (Chengming)

 - Remove a dead field in struct blk_mq_hw_ctx (Chengming)

* tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux:
  loop: do not enforce max_loop hard limit by (new) default
  loop: deprecate autoloading callback loop_probe()
  sbitmap: fix batching wakeup
  blk-iocost: skip empty flush bio in iocost
  blk-mq: delete dead struct blk_mq_hw_ctx->queued field
  blk-mq: Fix stall due to recursive flush plug