- 26 Nov, 2018 2 commits
-
-
Michael Straube authored
Remove unnecessary parentheses reported by checkpatch. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Straube authored
Cleanup remaining comparsions to true. if (x == true) -> if (x) if (x != true) -> if (!x) if (!x == true) -> if (!x) Signed-off-by:
-
- 23 Nov, 2018 19 commits
-
-
Ricardo Reis Marques Silva authored
Issue found by checkpatch. CHECK: Prefer kernel type 'u32' over 'uint32_t' +static const uint32_t vbox_cursor_plane_formats[] = { CHECK: Prefer kernel type 'u32' over 'uint32_t' +static const uint32_t vbox_primary_plane_formats[] = { CHECK: Prefer kernel type 'u32' over 'uint32_t' + const uint32_t *formats; Signed-off-by:Ricardo Reis Marques Silva <ricardormsilva93@gmail.com> Signed-off-by:
-
Michael Straube authored
The local variable ret is only used to test the return value of the call to rtl8188eu_xmitframe_complete(). Use the function directly in the if test and remove the variable ret. Signed-off-by:
-
Michael Straube authored
Replace tabs with spaces and/or remove spaces in declarations to cleanup whitespace. Signed-off-by:
-
Michael Straube authored
Add spaces around '>>' and '&' to follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Remove unnecessary parentheses in usb_ops_linux.c. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Correct spelling mistake in a comment reported by checkpatch. checksumed -> checksummed Signed-off-by:
-
Michael Straube authored
Remove braces from single line if else statement. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Cleanup line ending with a '(' to follow kernel coding style. Reported by checkpatch. Signed-off-by: -
Michael Straube authored
Use __func__ instead of hardcoded function names. Reported by checkpatch. Signed-off-by:
-
Gao Xiang authored
Previously, 2 members called `initial' and `cachedzone_la' are used for applying caching policy (whether the workgroup is at either end), which are hard to understand, rename them to `backmost' and `headoffset'. Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Gao Xiang authored
For the case of nr_to_read == lookahead_size, it is better to decompress asynchronously as well since no page will be needed immediately. Reviewed-by:
-
Gao Xiang authored
Let's make sure that the one registering a workgroup will also take the primary work lock at first for two reasons: 1) There's no need to introduce such a race window (and consequently overhead) between registering and locking, other tasks could break in by chance, and the race seems unnecessary (no benefit at all); 2) It's better to take the primary work when a workgroup is registered to apply the cache managed policy, for example, if some other tasks break in, it could turn into the in-place decompression rather than use as the cached decompression. Reviewed-by: -
Gao Xiang authored
`z_erofs_vle_workgroup' is heavily generated in the decompression, for example, it resets 32 bytes redundantly for 64-bit platforms even through Z_EROFS_VLE_INLINE_PAGEVECS + Z_EROFS_CLUSTER_MAX_PAGES, default 4, pages are stored in `z_erofs_vle_workgroup'. As an another example, `struct mutex' takes 72 bytes for our kirin 64-bit platforms, it's unnecessary to be reseted at first and be initialized each time. Let's avoid filling all `z_erofs_vle_workgroup' with 0 at first since most fields are reinitialized to meaningful values later, and pagevec is no need to initialized at all. Reviewed-by:
-
Gao Xiang authored
Just like other generic locks, insert a full barrier in case of memory reorder. Reviewed-by:
-
Gao Xiang authored
There are two minor issues in the current freeze interface: 1) Freeze interfaces have not related with CONFIG_DEBUG_SPINLOCK, therefore fix the incorrect conditions; 2) For SMP platforms, it should also disable preemption before doing atomic_cmpxchg in case that some high priority tasks preempt between atomic_cmpxchg and disable_preempt, then spin on the locked refcount later. Reviewed-by: -
Gao Xiang authored
It's better to use atomic_cond_read_relaxed, which is implemented in hardware instructions to monitor a variable changes currently for ARM64, instead of open-coded busy waiting. Reviewed-by:
-
Gao Xiang authored
When the managed cache is enabled, the last reference count of a workgroup must be used for its workstation. Otherwise, it could lead to incorrect (un)freezes in the reclaim path, and it would be harmful. A typical race as follows: Thread 1 (In the reclaim path) Thread 2 workgroup_freeze(grp, 1) refcnt = 1 ... workgroup_unfreeze(grp, 1) refcnt = 1 workgroup_get(grp) refcnt = 2 (x) workgroup_put(grp) refcnt = 1 (x) ...unexpected behaviors * grp is detached but still used, which violates cache-managed freeze constraint. Reviewed-by: -
Gao Xiang authored
It's better not to positively BUG_ON the kernel, however developers need a way to locate issues as soon as possible. DBG_BUGON is introduced and it could only crash when EROFS_FS_DEBUG (EROFS developping feature) is on. It is helpful for developers to find and solve bugs quickly by eng builds. Previously, DBG_BUGON is defined as ((void)0) if EROFS_FS_DEBUG is off, but some unused variable warnings as follows could occur: drivers/staging/erofs/unzip_vle.c: In function `init_alway:': drivers/staging/erofs/unzip_vle.c:61:33: warning: unused variable `work' [-Wunused-variable] struct z_erofs_vle_work *const work = ^~~~ Fix it to #define DBG_BUGON(x) ((void)(x)). Reviewed-by: -
Gao Xiang authored
`trace_erofs_readpage' was designed for .readpage() interface hook in order to trace the detailed synchronized read rather than the internal implementation `z_erofs_do_read_page' which both .readpage() and .readpages() use. It seems the tracepoint was placed to a wrong place by mistake and it should be moved to the right place. Fixes: 284db12c ("staging: erofs: add trace points for reading zipped data") Reviewed-by:
Chen Gong <gongchen4@huawei.com> Reviewed-by:
-
- 22 Nov, 2018 11 commits
-
-
Michael Straube authored
Rename struct field SwLed0 to avoid CamelCase. SwLed0 -> sw_led Signed-off-by:
-
Michael Straube authored
Rename the function LedControl8188eu to avoid CamelCase. LedControl8188eu -> led_control_8188eu Signed-off-by:
-
Michael Straube authored
The comment for blink_handler() adds no extra information in addition to the function name, so remove it. Signed-off-by:
-
Michael Straube authored
Rename the function BlinkHandler to avoid CamelCase. BlinkHandler -> blink_handler Signed-off-by:
-
Michael Straube authored
Rename the function SwLedOff to avoid CamelCase. SwLedOff -> sw_led_off Signed-off-by:
-
Michael Straube authored
Rename the function SwLedOn to avoid CamelCase. SwLedOn -> sw_led_on Signed-off-by:
-
Michael Straube authored
Rename the variable LedCfg to avoid CamleCase. LedCfg -> led_cfg Signed-off-by:
-
Michael Straube authored
Add spaces around '&' to follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Remove comments in rtl8188eu_led.c. The function names are well descriptive. Signed-off-by:
-
Michael Straube authored
Remove unnecessary parentheses reported by checkpatch. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: First set of new device support, features and cleanups for IIO in the 4.21 cycle Along with the headline feature of 5 new drivers, we have the substantial addition of auxilliary sensor support on the lsm6sdx parts for ST. There has also been a good set of staging cleanup in this period with more underway. An ever increasing number of devices supported with just a new ID which is a good sign that at least some manufacturers are continuing to stabilise their interfaces. New device support, * ad7124 - New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts with the inevitable DT binding. * ad7949 - New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs. * rm3100 - New driver supporting PNIs RM3100 magnometer with bindings and vendor prefix. * ti-dac7311 - New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with DT bindings. * vcnl5035 - New driver supporting the light sensor part of the VCNL4035, with DT bindings Features, * bindings - Add a generic ADC channel binding as we keep reinventing this wheel. * adc128s052 - Add IDs for additional pin compatible parts. - Add APCI ID seen on E3940 UP squared boards. * ad_sigma_delta - Allow for custom data register overiding default. * kxcjk1013 - Add KIOX0009 ACPI ID as seen on the Acer One 10. * lsm6dsx - Rework leading to... - External sensor support using the built in I2C master. - Initial support for a slave lis2mdl magnetometer. * meson-saradc - Add temperature sensor support and bindings. * st_magn - New ID for lsm9dsl_magn with bindings - New ID for lis3de accelerometer * tpl0102 - Add supprot for IIO_AVAIL_RANGE to report the range available from this device to userspace and in kernel users. Cleanups and minor fixes * tools - Allow outside specification of CFLAGS * ad2s90 - Handle and spi_read error. - Handle spi_setup failure - Drop a pointless assignment. - Prevent a potentail race by moving device registration to after all other setup. - Add missing scale attribute. - Add a sanity check on channel type before trying to read it. * ad2s1210 - Move to modern gpio descriptors. - Drop a gpioin flag which made no sense as far as we can tell. - Add dt table (bindings doc to follow when this is ready for moving out of staging). * ad5933 - Drop camel-case naming of ext_clk_hz. - White space fixes. * ad7150 - Local variable to shorten overly long line. - Alignment and line break fixes. * ad7280a - Handle an error path that was previously ignored. - Use crc8.h to build the crc table replacing custom code. - Avoid unecessary cast. - Power down the device if an error happens in probe - Use devm routines to simplify probe and remove. * ad7606 - Alignment fixes. * ad7780 - This worked as long as by coincidence an uninitialized value was 0. Lets not rely on that. - Ensure gain update is only used with the ad778x chips that actually support it. - Tidy up pattern mask generation. - Read regulator when scale is requested (which should be infrequent) as it might have changed from initialization. * ad7816 - Move to modern gpio descriptors - Don't use a busy_pin for ad7818 as there isn't one. - Ensure RD/WR and CONVST pins are outputs (previously they were brought up as inputs which doesn't seem to make any sense) - DT id table. * adc128s052 - SPDX * adt7316 - Alignment fix. - Fix data reading. When using I2C the driver never actually used the value read. This has been broken a very long time hence no rush to fix it now + the driver is undergoing a lot of cleanup. - Sanity check that the i2c read didn't fail to actually read anything. * dpot-dac - Mark a switch full through with slightly different text so that gcc doesn't warn on it. * gyro-adc - Fix a wrong file in the MAINTAINERS entry and add binding doc to the listed files. * ina2xx - Add some early returns to clarify error paths in switch. * lsm6dsx - MAINTAINERS entry. * max11100 - SPDX * max9611 - SPDX * mcp4131 - use of_device_get_match_data in preference to spi_get_device_id approach. * rcar-adc - SPDX * sc27xx - Add ADC conversion timeout support to avoid possible fault. * ssp_sensors - Don't free managed resources manually. * st-magn - Add a comment to avoid future confusion over when to use -magn postfix (on multi chip in package parts) - Add BDU register for LIS3MDL where it seems to have been missed. * st-sensors - Minor spelling, grammar etc fixes. * tpl0102 - Use a pointer rather than an index of an array to improve conciseness. * tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (80 commits) Staging: iio: adt7316: Add an extra check for 'ret' equals to 0 Staging: iio: adt7316: Fix i2c data reading, set the data field dt-bindings: iio: adc: Add docs for ad7124 iio: adc: Add ad7124 support dt-bindings: iio: adc: Add common ADCs properties to a separate file iio: ad_sigma_delta: Allow to provide custom data register address staging: iio: ad7816: Add device tree table. iio: imu: st_lsm6dsx: add entry in MAINTAINERS file iio: potentiometer: mcp4131: use of_device_get_match_data() staging: iio: adc: ad7280a: use devm_* APIs staging: iio: adc: ad7280a: power down the device on error in probe dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine iio: imu: st_lsm6dsx: add i2c embedded controller support iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap iio: imu: st_lsm6dsx: introduce locked read/write utility routines ...
-
- 20 Nov, 2018 8 commits
-
-
André Almeida authored
Using multiple license representation as shown here [1]. [1] https://spdx.org/sites/cpstandard/files/pages/files/using_spdx_license_list_short_identifiers.pdfSigned-off-by:
André Almeida <andrealmeid@riseup.net> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
André Almeida authored
As one can see in a typedef at linux/types.h:103, s32 and int32_t are both a 32 bits signed integer. s32 is preferred because it is defined by the kernel maintainers and it prevents portability issues. Changed to meet checkpatch criteria. Signed-off-by:
-
Cristian Sicilia authored
Align parameters to the opened parentesis. Signed-off-by:
Cristian Sicilia <sicilia.cristian@gmail.com> Reviewed-by:
-
Cristian Sicilia authored
Comparisons should place the constant on the right side of the test. Signed-off-by:
-
Cristian Sicilia authored
Replace equal to NULL with logic unary operator, and removing not equal to NULL comparison. Signed-off-by:
-
Tim Collier authored
Remove the unused crcend variable from the crcimage function. Signed-off-by:
Tim Collier <osdevtc@gmail.com> Signed-off-by:
-
Cristian Sicilia authored
Fix function naming and parenthesis. Signed-off-by:
-
Cristian Sicilia authored
The line is split up to stay in 80 characters- Signed-off-by:
-
