- 12 Jul, 2019 7 commits
-
-
Chris Wilson authored
This will be useful to consolidate recursive code. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712094327.24437-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
In preparation for refactoring the free/clear/alloc, first move the code around so that we can avoid forward declarations in the next set of patches. Signed-off-by:
-
Chris Wilson authored
The page directory extends the page table with the shadow entries. Make the page directory struct embed the page table for easier code reuse. Signed-off-by:
-
Chris Wilson authored
We only use the dma pages for scratch, and so do not need to allocate the extra storage for the shadow page directory. v2: Refrain from reintroducing I915_PDES Signed-off-by:
-
John Harrison authored
There is a debug message in the workaround initialisation path that reports how many entries were added of each type. However, whitelist workarounds exist for multiple engines but the type name is just 'whitelist'. Tvrtko suggested adding the engine name to make the message more useful. v2: Updated the similar message in the workaround reset selftest. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
John Harrison authored
Newer hardware supports extra feature in the whitelist registers. This patch updates the selftest to test that entries marked as read only are actually read only. v2: Removed all use of 'rsvd' for read-only registers to avoid ambiguous code or error messages. Signed-off-by:
-
John Harrison authored
As per review feedback by Tvrtko, added a check that no invalid bits are being set in the whitelist flags fields. Also updated the read/write access definitions to make it clearer that they are an enum field not a set of single bit flags. Signed-off-by:
-
- 11 Jul, 2019 33 commits
-
-
José Roberto de Souza authored
This register definition changed from ICL and has now another meaning. Use the right bits on TGL. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-22-lucas.demarchi@intel.com
-
Lucas De Marchi authored
On TGL the port programming for combophy is very similar to ICL, so adapt the callers to possibly use the different register values. v2 (Lucas): Add TODO with about DPLL4 (requested by Ville) Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Mahesh Kumar authored
Add VBT-value to DDC bus pin mapping for the same. Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Make the icl function generic so it is based on phy type and can be applied to tgl as well. I checked if this could not apply to EHL as well, but unfortunately there the HPD and DDC/GMBUS pins for DDI C are mapped to TypeC Port 1 even though it doesn't have TC phy. v2: don't add a separate function for TGL, but rather reuse the ICL one (suggested by Rodrigo) v3: rebase after the introduction of enum phy and use it for the conversions Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-19-lucas.demarchi@intel.com
-
Mahesh Kumar authored
Add default GPIO pin mapping for all ports. Tiger Lake has 3 combophy ports and 6 TC ports, gpio pin1-3 are mapped to combophy & pin9-14 are mapped to TC ports. Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Previously, the recommended B credit for all platforms was 24 / number of pipes, which would give 6 for newer platforms with 4 pipes. However 6 is not enough and we need 12 on these cases. We also need a different BW credit for these platforms. Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Add port C to workaround to cover Tiger Lake. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Mahesh Kumar authored
This patch initializes DDI PORT A, B & C for Tiger lake. Other TC ports need to be initialized later once corresponding code is there. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Tiger Lake has up to 3 combo phys and 6 TC phys. Extend the helper conversion functions from port to phy. Signed-off-by:
-
Vandita Kulkarni authored
There are 2 new additional typeC ports in Tiger Lake and PORT-C is now a combophy port. This results in 6 typeC ports and 3 combophy ports. These 6 TC ports can be DP alternate mode, DP over thunderbolt, native DP on legacy DP connector or native HDMI on legacy connector. v2: Rebase on new modular FIA code (Lucas) v3: Also add new port in port_identifier(), even though it can't possibly be used there (requested by José) v4: Add conversion port->tc_port in helper function after introction of phy namespace (Lucas) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Vandita Kulkarni authored
Add a new pll array for Tiger Lake. The TC pll functions for type C will be covered in later patches after its phy is implemented. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Vandita Kulkarni authored
Add 2 new PLLs for additional TC ports. The names for the PLLs on TGL changed, but most registers remained the same, like MGPLL5_ENABLE, MGPLL6_ENABLE. So continue to use the name from ICL. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-11-lucas.demarchi@intel.com
-
Mika Kahola authored
Add power well 5 to support 4th pipe and transcoder on TGL. Cc: James Ausmus <james.ausmus@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Imre Deak authored
The patch adds the new power wells introduced by TGL (GEN 12) and maps these to existing/new power domains. The changes for GEN 12 wrt to GEN 11 are the following: - Transcoder#EDP removed from power well#1 (Transcoder#A used in low-power mode instead) - Transcoder#A is now backed by power well#1 instead of power well#3 - The DDI#B/C combo PHY ports are now backed by power well#1 instead of power well#3 - New power well#5 added for pipe#D functionality (TODO) - 2 additional TC ports (TC#5-6) backed by power well#3, 2 port specific IO power wells (only for the non-TBT modes) and 4 port specific AUX power wells (2-2 for TBT vs. non-TBT modes) - Power well#2 backs now VDSC/joining for pipe#A instead of VDSC for eDP and MIPI DSI (TODO) On TGL Port DDI#C changed to be a combo PHY (native DP/HDMI) and BSpec has renamed ports DDI#D-F to TC#4-6 respectively. Thus on ICL we have the following naming for ports: - Combo PHYs (native DP/HDMI): DDI#A-B - TBT/non-TBT (TC altmode, native DP/HDMI) PHYs: DDI#C-F Starting from GEN 12 we have the following naming for ports: - Combo PHYs (native DP/HDMI): DDI#A-C - TBT/non-TBT (TC altmode, native DP/HDMI) PHYs: DDI TC#1-6 To save some space in the power domain enum the power domain naming in the driver reflects the above change, that is power domains TC#1-3 are added as aliases for DDI#D-F and new power domains are reserved for TC#4-6. v2 (Lucas): - Separate out the bits and definitions for TGL from the ICL ones. Fix use of TRANSCODER_EDP_VDSC, that is now the correct define since we don't define TRANSCODER_A_VDSC power domain to spare a one bit in the bitmask (suggested by Ville) v3 (Lucas): - Fix missing squashes on v2 - Rebase on renamed TRANSCODER_EDP_VDSC Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:Imre Deak <imre.deak@intel.com> Signed-off-by:
-
José Roberto de Souza authored
On TGL the special EDP transcoder is gone and it should be handled by transcoder A. v2 (Lucas): - Reuse POWER_DOMAIN_TRANSCODER_EDP_VDSC (suggested by Ville) - Use crtc->dev since new_crtc_state->state may be NULL on atomic commit (suggested by Maarten) v3 (Lucas): - Rename power domain so it's clear it can also be used for transcoder A in TGL (requested by José and Manasi) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-8-lucas.demarchi@intel.com
-
José Roberto de Souza authored
On Tiger Lake there is one more pipe - check if it's fused. Signed-off-by:
-
Lucas De Marchi authored
Current list of PCI IDs for Tiger Lake. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Mahesh Kumar authored
Assume PCH_TGP when platform is TGL. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
Add the enum additions to TGP. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: David Weinehall <david.weinehall@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Tiger Lake is a Intel
® Processor containing Intel® HD Graphics. This is just an initial Tiger Lake definition. PCI IDs, generic support and new features coming in following patches. v2 (Lucas): - Remove modular FIA - feature will be re-introduced in future Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Add pipe D and transcoder D to prepare for platforms having them. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
With 4:2:0 output the LS clock can be half of what it is with 4:4:4. Make that happen. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Tested-by:
-
Steven Rostedt (VMware) authored
Currently the intel_update_plane and intel_disable_plane tracepoints record the address of plane->name in the ring buffer, and then when reading the ring buffer uses %s to get the name. The issue with this, is that those two events can be minutes, hours or even days apart. It is very dangerous to dereference a string pointer without knowing if it still exists or not. The proper way to handle this is to use the __string() macro in the tracepoint which will save the string into the ring buffer at the time of recording. Then there's no worries if the original string still exists in memory when the ring buffer is read. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> [vsyrjala: Rebase on top of drm-tip] Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_guc_submission.c:799: warning: Excess function parameter 'ctx' description in 'guc_client_alloc' Signed-off-by:
-
Ville Syrjälä authored
Zero initialize val2 so that we don't pass stack garbage to the pcode qgv read command. I suspect in this case pcode just ignores the initial value in that registers, but better safe than sorry. Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ville Syrjälä authored
Make life less annoying by favoring the intel_ types over the drm_ types in intel_atomic_commit(). Signed-off-by:
-
Ville Syrjälä authored
Streamline the code a bit by using intel_ types instead of the drm_ types. Signed-off-by:
-
Ville Syrjälä authored
Streamline the code a bit by using intel_ types instead of drm_ types in intel_atomic_track_fbs(). Signed-off-by:
-
Ville Syrjälä authored
Use swap() instead of hand rolling it in intel_shared_dpll_swap_state(), and pass in the intel_atomic_state instead of drm_atomic_state. Makes the code less convoluted. Signed-off-by:
-
Ville Syrjälä authored
Pass just the crtc state to modeset_get_crtc_power_domains(). We can get the crtc from therein. Signed-off-by:
-
Ville Syrjälä authored
wm.mutex does not protect the crtc state so no point in grabbing it to check crtc_state->wm.need_postvbl_update. Also do a bit of s/intel_crtc/crtc/ while at it. Signed-off-by:
-
Ville Syrjälä authored
The PFI credit programming performed during cdclk change on vlv/chv requires access to a register in the disp2d power well. So far we've abused pipe-A power domain for this, but now we have the more appropriate "display core" domain so let's make use of it. Signed-off-by:
-
Chris Wilson authored
Right idea, wrong lock. We already drop struct_mutex before we free the mmap_offset when freeing the object, so we need to take the vma manager lock when manipulating the mmap_offset address space for our selftests. Fixes: 8221d21b ("drm/i915/selftests: Lock the drm_mm while modifying") Signed-off-by:
-
