- 21 Nov, 2018 40 commits
-
-
Miklos Szeredi authored
commit 2d84a2d1 upstream. In current fuse_drop_waiting() implementation it's possible that fuse_wait_aborted() will not be woken up in the unlikely case that fuse_abort_conn() + fuse_wait_aborted() runs in between checking fc->connected and calling atomic_dec(&fc->num_waiting). Do the atomic_dec_and_test() unconditionally, which also provides the necessary barrier against reordering with the fc->connected check. The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE barrier after resetting fc->connected. However, this is not a performance sensitive path, and adding the explicit barrier makes it easier to document. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: b8f95e5d ("fuse: umount should wait for all requests") Cc: <stable@vger.kernel.org> #v4.19 Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miklos Szeredi authored
commit 7fabaf30 upstream. fuse_request_send_notify_reply() may fail if the connection was reset for some reason (e.g. fs was unmounted). Don't leak request reference in this case. Besides leaking memory, this resulted in fc->num_waiting not being decremented and hence fuse_wait_aborted() left in a hanging and unkillable state. Fixes: 2d45ba38 ("fuse: add retrieve request") Fixes: b8f95e5d ("fuse: umount should wait for all requests") Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com Signed-off-by:
-
Lukas Czerner authored
commit ebacb812 upstream. In async IO blocking case the additional reference to the io is taken for it to survive fuse_aio_complete(). In non blocking case this additional reference is not needed, however we still reference io to figure out whether to wait for completion or not. This is wrong and will lead to use-after-free. Fix it by storing blocking information in separate variable. This was spotted by KASAN when running generic/208 fstest. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Reported-by:
Zorro Lang <zlang@redhat.com> Signed-off-by:
-
Maciej W. Rozycki authored
commit 7ce9a992 upstream. Fix an issue with the 32-bit range error path in `rtc_hctosys' where no error code is set and consequently the successful preceding call result from `rtc_read_time' is propagated to `rtc_hctosys_ret'. This in turn makes any subsequent call to `hctosys_show' incorrectly report in sysfs that the system time has been set from this RTC while it has not. Set the error to ERANGE then if we can't express the result due to an overflow. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Fixes: b3a5ac42 ("rtc: hctosys: Ensure system time doesn't overflow time_t") Cc: stable@vger.kernel.org # 4.17+ Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Scott Mayhew authored
commit 01310bb7 upstream. Make sure we have a saved filehandle, otherwise we'll oops with a null pointer dereference in nfs4_preprocess_stateid_op(). Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit 21a446cf upstream. If we exit the NFSv4 state manager due to a umount, then we can end up leaving the NFS4CLNT_MANAGER_RUNNING flag set. If another mount causes the nfs4_client to be rereferenced before it is destroyed, then we end up never being able to recover state. Fixes: 47c2199b ("NFSv4.1: Ensure state manager thread dies on last ...") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.15+ Signed-off-by:
-
Frank Sorenson authored
commit 5d7a5bcb upstream. When truncating the encode buffer, the page_ptr is getting advanced, causing the next page to be skipped while encoding. The page is still included in the response, so the response contains a page of bogus data. We need to adjust the page_ptr backwards to ensure we encode the next page into the correct place. We saw this triggered when concurrent directory modifications caused nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting call to xdr_truncate_encode() corrupted the READDIR reply. Signed-off-by:
Frank Sorenson <sorenson@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Christophe Leroy authored
commit 568fb6f4 upstream. Since commit ad67b74d ("printk: hash addresses printed with %p"), all pointers printed with %p are printed with hashed addresses instead of real addresses in order to avoid leaking addresses in dmesg and syslog. But this applies to kdb too, with is unfortunate: Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry kdb> ps 15 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh 0x(ptrval) 1 0 0 0 S 0x(ptrval) init 0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp 0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp 0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0 0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H 0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0 0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq 0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt The whole purpose of kdb is to debug, and for debugging real addresses need to be known. In addition, data displayed by kdb doesn't go into dmesg. This patch replaces all %p by %px in kdb in order to display real addresses. Fixes: ad67b74d ("printk: hash addresses printed with %p") Cc: <stable@vger.kernel.org> Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Christophe Leroy authored
commit dded2e15 upstream. On a powerpc 8xx, 'btc' fails as follows: Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0x0 when booting the kernel with 'debug_boot_weak_hash', it fails as well Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0xba99ad80 On other platforms, Oopses have been observed too, see https://github.com/linuxppc/linux/issues/139 This is due to btc calling 'btt' with %p pointer as an argument. This patch replaces %p by %px to get the real pointer value as expected by 'btt' Fixes: ad67b74d ("printk: hash addresses printed with %p") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ulf Hansson authored
commit 763f191a upstream. There's no point to register the cpuidle driver for the current CPU, when the initialization of the arch specific back-end data fails by returning -ENXIO. Instead, let's re-order the sequence to its original flow, by first trying to initialize the back-end part and then act accordingly on the returned error code. Additionally, let's print the error message, no matter of what error code that was returned. Fixes: a0d46a3d (ARM: cpuidle: Register per cpuidle device) Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Cc: 4.19+ <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dmitry V. Levin authored
commit aba11838 upstream. Consistently use types provided by <linux/types.h> via <drm/drm.h> to fix the following linux/kfd_ioctl.h userspace compilation errors: /usr/include/linux/kfd_ioctl.h:250:2: error: unknown type name 'uint32_t' uint32_t reset_type; /usr/include/linux/kfd_ioctl.h:251:2: error: unknown type name 'uint32_t' uint32_t reset_cause; /usr/include/linux/kfd_ioctl.h:252:2: error: unknown type name 'uint32_t' uint32_t memory_lost; /usr/include/linux/kfd_ioctl.h:253:2: error: unknown type name 'uint32_t' uint32_t gpu_id; Fixes: 0c119aba ("drm/amd: Add kfd ioctl defines for hw_exception event") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Benjamin Coddington authored
commit 1e9c75fb upstream. Since commit ff17fa56 ("d_invalidate(): unhash immediately") immediately unhashes the dentry, we'll never return the mountpoint in lookup_mountpoint(), which can lead to an unbreakable loop in d_invalidate(). I have reports of NFS clients getting into this condition after the server removes an export of an existing mount created through follow_automount(), but I suspect there are various other ways to produce this problem if we hunt down users of d_invalidate(). For example, it is possible to get into this state by using XFS' d_invalidate() call in xfs_vn_unlink(): truncate -s 100m img{1,2} mkfs.xfs -q -n version=ci img1 mkfs.xfs -q -n version=ci img2 mkdir -p /mnt/xfs mount img1 /mnt/xfs mkdir /mnt/xfs/sub1 mount img2 /mnt/xfs/sub1 cat > /mnt/xfs/sub1/foo & umount -l /mnt/xfs/sub1 mount img2 /mnt/xfs/sub1 mount --make-private /mnt/xfs mkdir /mnt/xfs/sub2 mount --move /mnt/xfs/sub1 /mnt/xfs/sub2 rmdir /mnt/xfs/sub1 Fix this by moving the check for an unlinked dentry out of the detach_mounts() path. Fixes: ff17fa56 ("d_invalidate(): unhash immediately") Cc: stable@vger.kernel.org Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
-
Eric W. Biederman authored
commit 9c8e0a1b upstream. Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote: > As per mount_namespaces(7) unprivileged users should not be able to look under mount points: > > Mounts that come as a single unit from more privileged mount are locked > together and may not be separated in a less privileged mount namespace. > > However they can: > > 1. Create a mount namespace. > 2. In the mount namespace open a file descriptor to the parent of a mount point. > 3. Destroy the mount namespace. > 4. Use the file descriptor to look under the mount point. > > I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8. > > The setup: > > $ sudo sysctl kernel.unprivileged_userns_clone=1 > kernel.unprivileged_userns_clone = 1 > $ mkdir -p A/B/Secret > $ sudo mount -t tmpfs hide A/B > > > "Secret" is indeed hidden as expected: > > $ ls -lR A > A: > total 0 > drwxrwxrwt 2 root root 40 Feb 12 21:08 B > > A/B: > total 0 > > > The attack revealing "Secret": > > $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A" > /proc/self/fd/4/: > total 0 > drwxr-xr-x 3 root root 60 Feb 12 21:08 B > > /proc/self/fd/4/B: > total 0 > drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret > > /proc/self/fd/4/B/Secret: > total 0 I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and disconnecting all of the mounts in a mount namespace. Fix this by factoring drop_mounts out of drop_collected_mounts and passing 0 instead of UMOUNT_SYNC. There are two possible behavior differences that result from this. - No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on the vfsmounts being unmounted. This effects the lazy rcu walk by kicking the walk out of rcu mode and forcing it to be a non-lazy walk. - No longer disconnecting locked mounts will keep some mounts around longer as they stay because the are locked to other mounts. There are only two users of drop_collected mounts: audit_tree.c and put_mnt_ns. In audit_tree.c the mounts are private and there are no rcu lazy walks only calls to iterate_mounts. So the changes should have no effect except for a small timing effect as the connected mounts are disconnected. In put_mnt_ns there may be references from process outside the mount namespace to the mounts. So the mounts remaining connected will be the bug fix that is needed. That rcu walks are allowed to continue appears not to be a problem especially as the rcu walk change was about an implementation detail not about semantics. Cc: stable@vger.kernel.org Fixes: 5ff9d8a6 ("vfs: Lock in place mounts from more privileged users") Reported-by:
Timothy Baldwin <timbaldwin@fastmail.co.uk> Tested-by:
-
Eric W. Biederman authored
commit df7342b2 upstream. Jonathan Calmels from NVIDIA reported that he's able to bypass the mount visibility security check in place in the Linux kernel by using a combination of the unbindable property along with the private mount propagation option to allow a unprivileged user to see a path which was purposefully hidden by the root user. Reproducer: # Hide a path to all users using a tmpfs root@castiana:~# mount -t tmpfs tmpfs /sys/devices/ root@castiana:~# # As an unprivileged user, unshare user namespace and mount namespace stgraber@castiana:~$ unshare -U -m -r # Confirm the path is still not accessible root@castiana:~# ls /sys/devices/ # Make /sys recursively unbindable and private root@castiana:~# mount --make-runbindable /sys root@castiana:~# mount --make-private /sys # Recursively bind-mount the rest of /sys over to /mnnt root@castiana:~# mount --rbind /sys/ /mnt # Access our hidden /sys/device as an unprivileged user root@castiana:~# ls /mnt/devices/ breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual Solve this by teaching copy_tree to fail if a mount turns out to be both unbindable and locked. Cc: stable@vger.kernel.org Fixes: 5ff9d8a6 ("vfs: Lock in place mounts from more privileged users") Reported-by:
Jonathan Calmels <jcalmels@nvidia.com> Signed-off-by:
-
Eric W. Biederman authored
commit 25d202ed upstream. It was recently pointed out that the one instance of testing MNT_LOCKED outside of the namespace_sem is in ksys_umount. Fix that by adding a test inside of do_umount with namespace_sem and the mount_lock held. As it helps to fail fails the existing test is maintained with an additional comment pointing out that it may be racy because the locks are not held. Cc: stable@vger.kernel.org Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Fixes: 5ff9d8a6 ("vfs: Lock in place mounts from more privileged users") Signed-off-by:
-
Vasily Averin authored
commit de59fae0 upstream. Fixes: dc6982ff ("ext4: refactor code to read directory blocks ...") Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.9 Signed-off-by:
-
Vasily Averin authored
commit 53692ec0 upstream. Fixes: de05ca85 ("ext4: move call to ext4_error() into ...") Signed-off-by:
-
Vasily Averin authored
commit 6bdc9977 upstream. Fixes: 3f2571c1 ("ext4: factor out xattr moving") Fixes: 6dd4ee7c ("ext4: Expand extra_inodes space per ...") Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Vasily Averin authored
commit 45ae932d upstream. bs.bh was taken in previous ext4_xattr_block_find() call, it should be released before re-using Fixes: 7e01c8e5 ("ext3/4: fix uninitialized bs in ...") Signed-off-by:
-
Vasily Averin authored
commit ecaaf408 upstream. Fixes: dec214d0 ("ext4: xattr inode deduplication") Signed-off-by:
-
Vasily Averin authored
commit af18e35b upstream. Fixes: c8585c6f ("ext4: fix races between changing inode journal ...") Signed-off-by:
-
Theodore Ts'o authored
commit 9e463084 upstream. Fixes: bfe0a5f4 ("ext4: add more mount time checks of the superblock") Reported-by:
-
Theodore Ts'o authored
commit 4f32c38b upstream. Fixes: b4097142 ("ext4: add error checking to calls to ...") Reported-by:
-
Vasily Averin authored
commit f348e224 upstream. Fixes: 117fff10 ("ext4: grow the s_flex_groups array as needed ...") Signed-off-by:
-
Vasily Averin authored
commit feaf264c upstream. Fixes: d745a8c2 ("ext4: reduce contention on s_orphan_lock") Fixes: 6e3617e5 ("ext4: Handle non empty on-disk orphan link") Cc: Dmitry Monakhov <dmonakhov@gmail.com> Signed-off-by:
-
Vasily Averin authored
commit a6758309 upstream. ext4_mark_iloc_dirty() callers expect that it releases iloc->bh even if it returns an error. Fixes: 0db1ff22 ("ext4: add shutdown bit and check for it") Signed-off-by:
-
Vasily Averin authored
commit db6aee62 upstream. Fixes: 1c6bd717 ("ext4: convert file system to meta_bg if needed ...") Signed-off-by:
-
Vasily Averin authored
commit eb6984fa upstream. According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write() should not return bh = NULL The only time that bh could be NULL, then, would be in the case of something really going wrong; a programming error elsewhere (perhaps a wild pointer dereference) or I/O error causing on-disk file system corruption (although that would be highly unlikely given that we had *just* allocated the blocks and so the metadata blocks in question probably would still be in the cache). Fixes: e50e5129 ("ext4: xattr-in-inode support") Signed-off-by:
-
Vasily Averin authored
commit 9e402893 upstream. Currently bh is set to NULL only during first iteration of for cycle, then this pointer is not cleared after end of using. Therefore rollback after errors can lead to extra brelse(bh) call, decrements bh counter and later trigger an unexpected warning in __brelse() Patch moves brelse() calls in body of cycle to exclude requirement of brelse() call in rollback. Fixes: 33afdcc5 ("ext4: add a function which sets up group blocks ...") Signed-off-by:
-
Vasily Averin authored
commit 61a9c11e upstream. Fixes: 01f795f9 ("ext4: add online resizing support for meta_bg ...") Signed-off-by:
-
Vasily Averin authored
commit cea57941 upstream. Fixes: 33afdcc5 ("ext4: add a function which sets up group blocks ...") Cc: stable@kernel.org # 3.3 Signed-off-by:
-
Vasily Averin authored
commit ea0abbb6 upstream. Fixes: ac27a0ec ("ext4: initial copy of files from ext3") Signed-off-by:
-
Michael Kelley authored
commit 35b69a42 upstream. Add support for platforms where pit_shutdown() doesn't work because of a quirk in the PIT emulation. On these platforms setting the counter register to zero causes the PIT to start running again, negating the shutdown. Provide a global variable that controls whether the counter register is zero'ed, which platform specific code can override. Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "devel@linuxdriverproject.org" <devel@linuxdriverproject.org> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "virtualization@lists.linux-foundation.org" <virtualization@lists.linux-foundation.org> Cc: "jgross@suse.com" <jgross@suse.com> Cc: "akataria@vmware.com" <akataria@vmware.com> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: vkuznets <vkuznets@redhat.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1541303219-11142-2-git-send-email-mikelley@microsoft.comSigned-off-by:
-
Shaokun Zhang authored
commit 761333f2 upstream. block_group_err shows the group system as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: fce466ea ("btrfs: tree-checker: Verify block_group_item") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
commit ac765f83 upstream. We currently allow cloning a range from a file which includes the last block of the file even if the file's size is not aligned to the block size. This is fine and useful when the destination file has the same size, but when it does not and the range ends somewhere in the middle of the destination file, it leads to corruption because the bytes between the EOF and the end of the block have undefined data (when there is support for discard/trimming they have a value of 0x00). Example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ export foo_size=$((256 * 1024 + 100)) $ xfs_io -f -c "pwrite -S 0x3c 0 $foo_size" /mnt/foo $ xfs_io -f -c "pwrite -S 0xb5 0 1M" /mnt/bar $ xfs_io -c "reflink /mnt/foo 0 512K $foo_size" /mnt/bar $ od -A d -t x1 /mnt/bar 0000000 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 * 0524288 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c * 0786528 3c 3c 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 0786544 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0790528 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 * 1048576 The bytes in the range from 786532 (512Kb + 256Kb + 100 bytes) to 790527 (512Kb + 256Kb + 4Kb - 1) got corrupted, having now a value of 0x00 instead of 0xb5. This is similar to the problem we had for deduplication that got recently fixed by commit de02b9f6 ("Btrfs: fix data corruption when deduplicating between different files"). Fix this by not allowing such operations to be performed and return the errno -EINVAL to user space. This is what XFS is doing as well at the VFS level. This change however now makes us return -EINVAL instead of -EOPNOTSUPP for cases where the source range maps to an inline extent and the destination range's end is smaller then the destination file's size, since the detection of inline extents is done during the actual process of dropping file extent items (at __btrfs_drop_extents()). Returning the -EINVAL error is done early on and solely based on the input parameters (offsets and length) and destination file's size. This makes us consistent with XFS and anyone else supporting cloning since this case is now checked at a higher level in the VFS and is where the -EINVAL will be returned from starting with kernel 4.20 (the VFS changed was introduced in 4.20-rc1 by commit 07d19dc9 ("vfs: avoid problematic remapping requests into partial EOF block"). So this change is more geared towards stable kernels, as it's unlikely the new VFS checks get removed intentionally. A test case for fstests follows soon, as well as an update to filter existing tests that expect -EOPNOTSUPP to accept -EINVAL as well. CC: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
commit 11023d3f upstream. If we attempt to deduplicate the last block of a file A into the middle of a file B, and file A's size is not a multiple of the block size, we end rounding the deduplication length to 0 bytes, to avoid the data corruption issue fixed by commit de02b9f6 ("Btrfs: fix data corruption when deduplicating between different files"). However a length of zero will cause the insertion of an extent state with a start value greater (by 1) then the end value, leading to a corrupt extent state that will trigger a warning and cause chaos such as an infinite loop during inode eviction. Example trace: [96049.833585] ------------[ cut here ]------------ [96049.833714] WARNING: CPU: 0 PID: 24448 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs] [96049.833767] CPU: 0 PID: 24448 Comm: xfs_io Not tainted 4.19.0-rc7-btrfs-next-39 #1 [96049.833768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [96049.833780] RIP: 0010:insert_state+0x101/0x120 [btrfs] [96049.833783] RSP: 0018:ffffafd2c3707af0 EFLAGS: 00010282 [96049.833785] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006 [96049.833786] RDX: 0000000000000007 RSI: ffff99045c143230 RDI: ffff99047b2168a0 [96049.833787] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000 [96049.833787] R10: ffffafd2c3707ab8 R11: 0000000000000000 R12: ffff9903b93b12c8 [96049.833788] R13: 000000000004e000 R14: ffffafd2c3707b80 R15: ffffafd2c3707b78 [96049.833790] FS: 00007f5c14e7d700(0000) GS:ffff99047b200000(0000) knlGS:0000000000000000 [96049.833791] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [96049.833792] CR2: 00007f5c146abff8 CR3: 0000000115f4c004 CR4: 00000000003606f0 [96049.833795] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [96049.833796] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [96049.833796] Call Trace: [96049.833809] __set_extent_bit+0x46c/0x6a0 [btrfs] [96049.833823] lock_extent_bits+0x6b/0x210 [btrfs] [96049.833831] ? _raw_spin_unlock+0x24/0x30 [96049.833841] ? test_range_bit+0xdf/0x130 [btrfs] [96049.833853] lock_extent_range+0x8e/0x150 [btrfs] [96049.833864] btrfs_double_extent_lock+0x78/0xb0 [btrfs] [96049.833875] btrfs_extent_same_range+0x14e/0x550 [btrfs] [96049.833885] ? rcu_read_lock_sched_held+0x3f/0x70 [96049.833890] ? __kmalloc_node+0x2b0/0x2f0 [96049.833899] ? btrfs_dedupe_file_range+0x19a/0x280 [btrfs] [96049.833909] btrfs_dedupe_file_range+0x270/0x280 [btrfs] [96049.833916] vfs_dedupe_file_range_one+0xd9/0xe0 [96049.833919] vfs_dedupe_file_range+0x131/0x1b0 [96049.833924] do_vfs_ioctl+0x272/0x6e0 [96049.833927] ? __fget+0x113/0x200 [96049.833931] ksys_ioctl+0x70/0x80 [96049.833933] __x64_sys_ioctl+0x16/0x20 [96049.833937] do_syscall_64+0x60/0x1b0 [96049.833939] entry_SYSCALL_64_after_hwframe+0x49/0xbe [96049.833941] RIP: 0033:0x7f5c1478ddd7 [96049.833943] RSP: 002b:00007ffe15b196a8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [96049.833945] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1478ddd7 [96049.833946] RDX: 00005625ece322d0 RSI: 00000000c0189436 RDI: 0000000000000004 [96049.833947] RBP: 0000000000000000 R08: 00007f5c14a46f48 R09: 0000000000000040 [96049.833948] R10: 0000000000000541 R11: 0000000000000202 R12: 0000000000000000 [96049.833949] R13: 0000000000000000 R14: 0000000000000004 R15: 00005625ece322d0 [96049.833954] irq event stamp: 6196 [96049.833956] hardirqs last enabled at (6195): [<ffffffff91b00663>] console_unlock+0x503/0x640 [96049.833958] hardirqs last disabled at (6196): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c [96049.833959] softirqs last enabled at (6114): [<ffffffff92600370>] __do_softirq+0x370/0x421 [96049.833964] softirqs last disabled at (6095): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0 [96049.833965] ---[ end trace db7b05f01b7fa10c ]--- [96049.935816] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910 [96049.935822] irq event stamp: 6584 [96049.935823] hardirqs last enabled at (6583): [<ffffffff91b00663>] console_unlock+0x503/0x640 [96049.935825] hardirqs last disabled at (6584): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c [96049.935827] softirqs last enabled at (6328): [<ffffffff92600370>] __do_softirq+0x370/0x421 [96049.935828] softirqs last disabled at (6313): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0 [96049.935829] ---[ end trace db7b05f01b7fa123 ]--- [96049.935840] ------------[ cut here ]------------ [96049.936065] WARNING: CPU: 1 PID: 24463 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs] [96049.936107] CPU: 1 PID: 24463 Comm: umount Tainted: G W 4.19.0-rc7-btrfs-next-39 #1 [96049.936108] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [96049.936117] RIP: 0010:insert_state+0x101/0x120 [btrfs] [96049.936119] RSP: 0018:ffffafd2c3637bc0 EFLAGS: 00010282 [96049.936120] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006 [96049.936121] RDX: 0000000000000007 RSI: ffff990445cf88e0 RDI: ffff99047b2968a0 [96049.936122] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000 [96049.936123] R10: ffffafd2c3637b88 R11: 0000000000000000 R12: ffff9904574301e8 [96049.936124] R13: 000000000004e000 R14: ffffafd2c3637c50 R15: ffffafd2c3637c48 [96049.936125] FS: 00007fe4b87e72c0(0000) GS:ffff99047b280000(0000) knlGS:0000000000000000 [96049.936126] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [96049.936128] CR2: 00005562e52618d8 CR3: 00000001151c8005 CR4: 00000000003606e0 [96049.936129] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [96049.936131] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [96049.936131] Call Trace: [96049.936141] __set_extent_bit+0x46c/0x6a0 [btrfs] [96049.936154] lock_extent_bits+0x6b/0x210 [btrfs] [96049.936167] btrfs_evict_inode+0x1e1/0x5a0 [btrfs] [96049.936172] evict+0xbf/0x1c0 [96049.936174] dispose_list+0x51/0x80 [96049.936176] evict_inodes+0x193/0x1c0 [96049.936180] generic_shutdown_super+0x3f/0x110 [96049.936182] kill_anon_super+0xe/0x30 [96049.936189] btrfs_kill_super+0x13/0x100 [btrfs] [96049.936191] deactivate_locked_super+0x3a/0x70 [96049.936193] cleanup_mnt+0x3b/0x80 [96049.936195] task_work_run+0x93/0xc0 [96049.936198] exit_to_usermode_loop+0xfa/0x100 [96049.936201] do_syscall_64+0x17f/0x1b0 [96049.936202] entry_SYSCALL_64_after_hwframe+0x49/0xbe [96049.936204] RIP: 0033:0x7fe4b80cfb37 [96049.936206] RSP: 002b:00007ffff092b688 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [96049.936207] RAX: 0000000000000000 RBX: 00005562e5259060 RCX: 00007fe4b80cfb37 [96049.936208] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00005562e525faa0 [96049.936209] RBP: 00005562e525faa0 R08: 00005562e525f770 R09: 0000000000000015 [96049.936210] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fe4b85d1e64 [96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910 [96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910 [96049.936216] irq event stamp: 6616 [96049.936219] hardirqs last enabled at (6615): [<ffffffff91b00663>] console_unlock+0x503/0x640 [96049.936219] hardirqs last disabled at (6616): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c [96049.936222] softirqs last enabled at (6328): [<ffffffff92600370>] __do_softirq+0x370/0x421 [96049.936222] softirqs last disabled at (6313): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0 [96049.936223] ---[ end trace db7b05f01b7fa124 ]--- The second stack trace, from inode eviction, is repeated forever due to the infinite loop during eviction. This is the same type of problem fixed way back in 2015 by commit 113e8283 ("Btrfs: fix inode eviction infinite loop after extent_same ioctl") and commit ccccf3d6 ("Btrfs: fix inode eviction infinite loop after cloning into it"). So fix this by returning immediately if the deduplication range length gets rounded down to 0 bytes, as there is nothing that needs to be done in such case. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0xe6 0 100" /mnt/foo $ xfs_io -f -c "pwrite -S 0xe6 0 1M" /mnt/bar # Unmount the filesystem and mount it again so that we start without any # extent state records when we ask for the deduplication. $ umount /mnt $ mount /dev/sdb /mnt $ xfs_io -c "dedupe /mnt/foo 0 500K 100" /mnt/bar # This unmount triggers the infinite loop. $ umount /mnt A test case for fstests will follow soon. Fixes: de02b9f6 ("Btrfs: fix data corruption when deduplicating between different files") CC: <stable@vger.kernel.org> # 4.19+ Reviewed-by:
-
Robbie Ko authored
commit 506481b2 upstream. When the cow_file_range fails, the related resources are unlocked according to the range [start..end), so the unlock cannot be repeated in run_delalloc_nocow. In some cases (e.g. cur_offset <= end && cow_start != -1), cur_offset is not updated correctly, so move the cur_offset update before cow_file_range. kernel BUG at mm/page-writeback.c:2663! Internal error: Oops - BUG: 0 [#1] SMP CPU: 3 PID: 31525 Comm: kworker/u8:7 Tainted: P O Hardware name: Realtek_RTD1296 (DT) Workqueue: writeback wb_workfn (flush-btrfs-1) task: ffffffc076db3380 ti: ffffffc02e9ac000 task.ti: ffffffc02e9ac000 PC is at clear_page_dirty_for_io+0x1bc/0x1e8 LR is at clear_page_dirty_for_io+0x14/0x1e8 pc : [<ffffffc00033c91c>] lr : [<ffffffc00033c774>] pstate: 40000145 sp : ffffffc02e9af4f0 Process kworker/u8:7 (pid: 31525, stack limit = 0xffffffc02e9ac020) Call trace: [<ffffffc00033c91c>] clear_page_dirty_for_io+0x1bc/0x1e8 [<ffffffbffc514674>] extent_clear_unlock_delalloc+0x1e4/0x210 [btrfs] [<ffffffbffc4fb168>] run_delalloc_nocow+0x3b8/0x948 [btrfs] [<ffffffbffc4fb948>] run_delalloc_range+0x250/0x3a8 [btrfs] [<ffffffbffc514c0c>] writepage_delalloc.isra.21+0xbc/0x1d8 [btrfs] [<ffffffbffc516048>] __extent_writepage+0xe8/0x248 [btrfs] [<ffffffbffc51630c>] extent_write_cache_pages.isra.17+0x164/0x378 [btrfs] [<ffffffbffc5185a8>] extent_writepages+0x48/0x68 [btrfs] [<ffffffbffc4f5828>] btrfs_writepages+0x20/0x30 [btrfs] [<ffffffc00033d758>] do_writepages+0x30/0x88 [<ffffffc0003ba0f4>] __writeback_single_inode+0x34/0x198 [<ffffffc0003ba6c4>] writeback_sb_inodes+0x184/0x3c0 [<ffffffc0003ba96c>] __writeback_inodes_wb+0x6c/0xc0 [<ffffffc0003bac20>] wb_writeback+0x1b8/0x1c0 [<ffffffc0003bb0f0>] wb_workfn+0x150/0x250 [<ffffffc0002b0014>] process_one_work+0x1dc/0x388 [<ffffffc0002b02f0>] worker_thread+0x130/0x500 [<ffffffc0002b6344>] kthread+0x10c/0x110 [<ffffffc000284590>] ret_from_fork+0x10/0x40 Code: d503201f a9025bb5 a90363b7 f90023b9 (d4210000) CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Robbie Ko <robbieko@synology.com> Signed-off-by:
-
Filipe Manana authored
commit 008c6753 upstream. Recently we got a massive simplification for fsync, where for the fast path we no longer log new extents while their respective ordered extents are still running. However that simplification introduced a subtle regression for the case where we use a ranged fsync (msync). Consider the following example: CPU 0 CPU 1 mmap write to range [2Mb, 4Mb[ mmap write to range [512Kb, 1Mb[ msync range [512K, 1Mb[ --> triggers fast fsync (BTRFS_INODE_NEEDS_FULL_SYNC not set) --> creates extent map A for this range and adds it to list of modified extents --> starts ordered extent A for this range --> waits for it to complete writeback triggered for range [2Mb, 4Mb[ --> create extent map B and adds it to the list of modified extents --> creates ordered extent B --> start looking for and logging modified extents --> logs extent maps A and B --> finds checksums for extent A in the csum tree, but not for extent B fsync (msync) finishes --> ordered extent B finishes and its checksums are added to the csum tree <power cut> After replaying the log, we have the extent covering the range [2Mb, 4Mb[ but do not have the data checksum items covering that file range. This happens because at the very beginning of an fsync (btrfs_sync_file()) we start and wait for IO in the given range [512Kb, 1Mb[ and therefore wait for any ordered extents in that range to complete before we start logging the extents. However if right before we start logging the extent in our range [512Kb, 1Mb[, writeback is started for any other dirty range, such as the range [2Mb, 4Mb[ due to memory pressure or a concurrent fsync or msync (btrfs_sync_file() starts writeback before acquiring the inode's lock), an ordered extent is created for that other range and a new extent map is created to represent that range and added to the inode's list of modified extents. That means that we will see that other extent in that list when collecting extents for logging (done at btrfs_log_changed_extents()) and log the extent before the respective ordered extent finishes - namely before the checksum items are added to the checksums tree, which is where log_extent_csums() looks for the checksums, therefore making us log an extent without logging its checksums. Before that massive simplification of fsync, this wasn't a problem because besides looking for checkums in the checksums tree, we also looked for them in any ordered extent still running. The consequence of data checksums missing for a file range is that users attempting to read the affected file range will get -EIO errors and dmesg reports the following: [10188.358136] BTRFS info (device sdc): no csum found for inode 297 start 57344 [10188.359278] BTRFS warning (device sdc): csum failed root 5 ino 297 off 57344 csum 0x98f94189 expected csum 0x00000000 mirror 1 So fix this by skipping extents outside of our logging range at btrfs_log_changed_extents() and leaving them on the list of modified extents so that any subsequent ranged fsync may collect them if needed. Also, if we find a hole extent outside of the range still log it, just to prevent having gaps between extent items after replaying the log, otherwise fsck will complain when we are not using the NO_HOLES feature (fstest btrfs/056 triggers such case). Fixes: e7175a69 ("btrfs: remove the wait ordered logic in the log_one_extent path") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Lu Fengqi authored
commit fcd5e742 upstream. When running generic/475, we may get the following warning in dmesg: [ 6902.102154] WARNING: CPU: 3 PID: 18013 at fs/btrfs/extent-tree.c:9776 btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.109160] CPU: 3 PID: 18013 Comm: umount Tainted: G W O 4.19.0-rc8+ #8 [ 6902.110971] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 6902.112857] RIP: 0010:btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.118921] RSP: 0018:ffffc9000459bdb0 EFLAGS: 00010286 [ 6902.120315] RAX: ffff880175050bb0 RBX: ffff8801124a8000 RCX: 0000000000170007 [ 6902.121969] RDX: 0000000000000002 RSI: 0000000000170007 RDI: ffffffff8125fb74 [ 6902.123716] RBP: ffff880175055d10 R08: 0000000000000000 R09: 0000000000000000 [ 6902.125417] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175055d88 [ 6902.127129] R13: ffff880175050bb0 R14: 0000000000000000 R15: dead000000000100 [ 6902.129060] FS: 00007f4507223780(0000) GS:ffff88017ba00000(0000) knlGS:0000000000000000 [ 6902.130996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6902.132558] CR2: 00005623599cac78 CR3: 000000014b700001 CR4: 00000000003606e0 [ 6902.134270] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6902.135981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6902.137836] Call Trace: [ 6902.138939] close_ctree+0x171/0x330 [btrfs] [ 6902.140181] ? kthread_stop+0x146/0x1f0 [ 6902.141277] generic_shutdown_super+0x6c/0x100 [ 6902.142517] kill_anon_super+0x14/0x30 [ 6902.143554] btrfs_kill_super+0x13/0x100 [btrfs] [ 6902.144790] deactivate_locked_super+0x2f/0x70 [ 6902.146014] cleanup_mnt+0x3b/0x70 [ 6902.147020] task_work_run+0x9e/0xd0 [ 6902.148036] do_syscall_64+0x470/0x600 [ 6902.149142] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 6902.150375] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 6902.151640] RIP: 0033:0x7f45077a6a7b [ 6902.157324] RSP: 002b:00007ffd589f3e68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 6902.159187] RAX: 0000000000000000 RBX: 000055e8eec732b0 RCX: 00007f45077a6a7b [ 6902.160834] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055e8eec73490 [ 6902.162526] RBP: 0000000000000000 R08: 000055e8eec734b0 R09: 00007ffd589f26c0 [ 6902.164141] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e8eec73490 [ 6902.165815] R13: 00007f4507ac61a4 R14: 0000000000000000 R15: 00007ffd589f40d8 [ 6902.167553] irq event stamp: 0 [ 6902.168998] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 6902.170731] hardirqs last disabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00 [ 6902.172773] softirqs last enabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00 [ 6902.174671] softirqs last disabled at (0): [<0000000000000000>] (null) [ 6902.176407] ---[ end trace 463138c2986b275c ]--- [ 6902.177636] BTRFS info (device dm-3): space_info 4 has 273465344 free, is not full [ 6902.179453] BTRFS info (device dm-3): space_info total=276824064, used=4685824, pinned=18446744073708158976, reserved=0, may_use=0, readonly=65536 In the above line there's "pinned=18446744073708158976" which is an unsigned u64 value of -1392640, an obvious underflow. When transaction_kthread is running cleanup_transaction(), another fsstress is running btrfs_commit_transaction(). The btrfs_finish_extent_commit() may get the same range as btrfs_destroy_pinned_extent() got, which causes the pinned underflow. Fixes: d4b450cd ("Btrfs: fix race between transaction commit and empty block group removal") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reviewed-by:
-
Mathieu Malaterre authored
commit 81bd415c upstream. The split out of the hard lockup detector exposed two new weak functions, but no prototypes for them, which triggers the build warning: kernel/watchdog.c:109:12: warning: no previous prototype for ‘watchdog_nmi_enable’ [-Wmissing-prototypes] kernel/watchdog.c:115:13: warning: no previous prototype for ‘watchdog_nmi_disable’ [-Wmissing-prototypes] Add the prototypes. Fixes: 73ce0511 ("kernel/watchdog.c: move hardlockup detector to separate file") Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
