The cpsw-phy-sel device is not a child of the cpsw interconnect target
module. It lives in the system control module.

Let's fix this issue by trying to use cpsw-phy-sel phandle first if it
exists and if not fall back to current usage of trying to find the
cpsw-phy-sel child. That way the phy sel driver can be a child of the
system control module where it belongs in the device tree.

Without this fix, we cannot have a proper interconnect target module
hierarchy in device tree for things like genpd.

Note that deferred probe is mostly not supported by cpsw and this patch
does not attempt to fix that. In case deferred probe support is needed,
this could be added to cpsw_slave_open() and phy_connect() so they start
handling and returning errors.

For documenting it, looks like the cpsw-phy-sel is used for all cpsw device
tree nodes. It's missing the related binding documentation, so let's also
update the binding documentation accordingly.

Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current cpsw usage for cpsw-phy-sel is undocumented but is used for
all the boards using cpsw. And cpsw-phy-sel is not really a child of
the cpsw device, it lives in the system control module instead.

Let's document the existing usage, and improve it a bit where we prefer
to use a phandle instead of a child device for it. That way we can
properly describe the hardware in dts files for things like genpd.

Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hangbin Liu says:

====================
igmp: fix two incorrect unsolicit report count issues

Just like the subject, fix two minor igmp unsolicit report count issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

After link down and up, i.e. when call ip_mc_up(), we doesn't init
im->unsolicit_count. So after igmp_timer_expire(), we will not start
timer again and only send one unsolicit report at last.

Fix it by initializing im->unsolicit_count in igmp_group_added(), so
we can respect igmp robustness value.

Fixes: 24803f38 ("igmp: do not remove igmp souce list info when set link down")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not start timer if im->unsolicit_count equal to 0 after decrease.
Or we will send one more unsolicit report message. i.e. 3 instead of 2 by
default.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 80f1a0f4 ("net/ipv6: Put lwtstate when destroying fib6_info")
partially fixed the kmemleak [1], lwtstate can be copied from fib6_info,
with ip6_rt_copy_init(), and it should be done only once there.

rt->dst.lwtstate is set by ip6_rt_init_dst(), at the start of the function
ip6_rt_copy_init(), so there is no need to get it again at the end.

With this patch, lwtstate also isn't copied from RTF_REJECT routes.

[1]:
unreferenced object 0xffff880b6aaa14e0 (size 64):
  comm "ip", pid 10577, jiffies 4295149341 (age 1273.903s)
  hex dump (first 32 bytes):
    01 00 04 00 04 00 00 00 10 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000018664623>] lwtunnel_build_state+0x1bc/0x420
    [<00000000b73aa29a>] ip6_route_info_create+0x9f7/0x1fd0
    [<00000000ee2c5d1f>] ip6_route_add+0x14/0x70
    [<000000008537b55c>] inet6_rtm_newroute+0xd9/0xe0
    [<000000002acc50f5>] rtnetlink_rcv_msg+0x66f/0x8e0
    [<000000008d9cd381>] netlink_rcv_skb+0x268/0x3b0
    [<000000004c893c76>] netlink_unicast+0x417/0x5a0
    [<00000000f2ab1afb>] netlink_sendmsg+0x70b/0xc30
    [<00000000890ff0aa>] sock_sendmsg+0xb1/0xf0
    [<00000000a2e7b66f>] ___sys_sendmsg+0x659/0x950
    [<000000001e7426c8>] __sys_sendmsg+0xde/0x170
    [<00000000fe411443>] do_syscall_64+0x9f/0x4a0
    [<000000001be7b28b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<000000006d21f353>] 0xffffffffffffffff

Fixes: 6edb3c96 ("net/ipv6: Defer initialization of dst to data path")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check the return codes of these functions and halt reset
in case of failure. The driver will remain in a dormant state
until the next reset event, when device initialization will be
re-attempted.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some systems don't have the ping6 binary anymore, and use ping for
everything. Detect the absence of ping6 and try to use ping instead.

Fixes: d1f1b9cb ("selftests: net: Introduce first PMTU test")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 82612de1 ("ip_tunnel: restore binding to ifaces with a
large mtu"), the maximum MTU for vti4 is based on IP_MAX_MTU instead of
the mysterious constant 0xFFF8.  This makes this selftest fail.

Fixes: 82612de1 ("ip_tunnel: restore binding to ifaces with a large mtu")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC 1337 says:
 ''Ignore RST segments in TIME-WAIT state.
   If the 2 minute MSL is enforced, this fix avoids all three hazards.''

So with net.ipv4.tcp_rfc1337=1, expected behaviour is to have TIME-WAIT sk
expire rather than removing it instantly when a reset is received.

However, Linux will also re-start the TIME-WAIT timer.

This causes connect to fail when tying to re-use ports or very long
delays (until syn retry interval exceeds MSL).

packetdrill test case:
// Demonstrate bogus rearming of TIME-WAIT timer in rfc1337 mode.
`sysctl net.ipv4.tcp_rfc1337=1`

0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0

0.100 < S 0:0(0) win 29200 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4

// Receive first segment
0.310 < P. 1:1001(1000) ack 1 win 46

// Send one ACK
0.310 > . 1:1(0) ack 1001

// read 1000 byte
0.310 read(4, ..., 1000) = 1000

// Application writes 100 bytes
0.350 write(4, ..., 100) = 100
0.350 > P. 1:101(100) ack 1001

// ACK
0.500 < . 1001:1001(0) ack 101 win 257

// close the connection
0.600 close(4) = 0
0.600 > F. 101:101(0) ack 1001 win 244

// Our side is in FIN_WAIT_1 & waits for ack to fin
0.7 < . 1001:1001(0) ack 102 win 244

// Our side is in FIN_WAIT_2 with no outstanding data.
0.8 < F. 1001:1001(0) ack 102 win 244
0.8 > . 102:102(0) ack 1002 win 244

// Our side is now in TIME_WAIT state, send ack for fin.
0.9 < F. 1002:1002(0) ack 102 win 244
0.9 > . 102:102(0) ack 1002 win 244

// Peer reopens with in-window SYN:
1.000 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7>

// Therefore, reply with ACK.
1.000 > . 102:102(0) ack 1002 win 244

// Peer sends RST for this ACK.  Normally this RST results
// in tw socket removal, but rfc1337=1 setting prevents this.
1.100 < R 1002:1002(0) win 244

// second syn. Due to rfc1337=1 expect another pure ACK.
31.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7>
31.0 > . 102:102(0) ack 1002 win 244

// .. and another RST from peer.
31.1 < R 1002:1002(0) win 244
31.2 `echo no timer restart;ss -m -e -a -i -n -t -o state TIME-WAIT`

// third syn after one minute.  Time-Wait socket should have expired by now.
63.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7>

// so we expect a syn-ack & 3whs to proceed from here on.
63.0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>

Without this patch, 'ss' shows restarts of tw timer and last packet is
thus just another pure ack, more than one minute later.

This restores the original code from commit 283fd6cf0be690a83
("Merge in ANK networking jumbo patch") in netdev-vger-cvs.git .

For some reason the else branch was removed/lost in 1f28b683339f7
("Merge in TCP/UDP optimizations and [..]") and timer restart became
unconditional.
Reported-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Getting prompt "The RDS Protocol" (RDS) is not too helpful, and it is
easily confused with Radio Data System (which we may want to support
in kernel, too).
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the race between netvsc_probe() and
rndis_set_subchannel(), which can cause a deadlock.

These are the related 3 paths which show the deadlock:

path #1:
    Workqueue: hv_vmbus_con vmbus_onmessage_work [hv_vmbus]
    Call Trace:
     schedule
     schedule_preempt_disabled
     __mutex_lock
     __device_attach
     bus_probe_device
     device_add
     vmbus_device_register
     vmbus_onoffer
     vmbus_onmessage_work
     process_one_work
     worker_thread
     kthread
     ret_from_fork

path #2:
    schedule
     schedule_preempt_disabled
     __mutex_lock
     netvsc_probe
     vmbus_probe
     really_probe
     __driver_attach
     bus_for_each_dev
     driver_attach_async
     async_run_entry_fn
     process_one_work
     worker_thread
     kthread
     ret_from_fork

path #3:
    Workqueue: events netvsc_subchan_work [hv_netvsc]
    Call Trace:
     schedule
     rndis_set_subchannel
     netvsc_subchan_work
     process_one_work
     worker_thread
     kthread
     ret_from_fork

Before path #1 finishes, path #2 can start to run, because just before
the "bus_probe_device(dev);" in device_add() in path #1, there is a line
"object_uevent(&dev->kobj, KOBJ_ADD);", so systemd-udevd can
immediately try to load hv_netvsc and hence path #2 can start to run.

Next, path #2 offloads the subchannal's initialization to a workqueue,
i.e. path #3, so we can end up in a deadlock situation like this:

Path #2 gets the device lock, and is trying to get the rtnl lock;
Path #3 gets the rtnl lock and is waiting for all the subchannel messages
to be processed;
Path #1 is trying to get the device lock, but since #2 is not releasing
the device lock, path #1 has to sleep; since the VMBus messages are
processed one by one, this means the sub-channel messages can't be
procedded, so #3 has to sleep with the rtnl lock held, and finally #2
has to sleep... Now all the 3 paths are sleeping and we hit the deadlock.

With the patch, we can make sure #2 gets both the device lock and the
rtnl lock together, gets its job done, and releases the locks, so #1
and #3 will not be blocked for ever.

Fixes: 8195b139 ("hv_netvsc: fix deadlock on hotplug")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To avoid leaking a running timer we need to wait for the
posted reconfigs after netdev is unregistered.  In common
case the process of deinitializing the device will perform
synchronous reconfigs which wait for posted requests, but
especially with VXLAN ports being actively added and removed
there can be a race condition leaving a timer running after
adapter structure is freed leading to a crash.

Add an explicit flush after deregistering and for a good
measure a warning to check if timer is running just before
structures are freed.

Fixes: 3d780b92 ("nfp: add async reconfiguration mechanism")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 71e41286.

mmap()/munmap() can not be backed by kmalloced pages :

We fault in :

    VM_BUG_ON_PAGE(PageSlab(page), page);

    unmap_single_vma+0x8a/0x110
    unmap_vmas+0x4b/0x90
    unmap_region+0xc9/0x140
    do_munmap+0x274/0x360
    vm_munmap+0x81/0xc0
    SyS_munmap+0x2b/0x40
    do_syscall_64+0x13e/0x1c0
    entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: 71e41286 ("packet: switch kvzalloc to allocate memory")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: John Sperbeck <jsperbeck@google.com>
Bisected-by: John Sperbeck <jsperbeck@google.com>
Cc: Zhang Yu <zhangyu31@baidu.com>
Cc: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
net_sched: reject unknown tcfa_action values

As agreed some time ago, this changeset reject unknown tcfa_action values,
instead of changing such values under the hood.

A tdc test is included to verify the new behavior.

v1 -> v2:
 - helper is now static and renamed according to act_* convention
 - updated extack message, according to the new behavior
====================
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only the police action allows us to specify an arbitrary numeric value
for the control action. This change introduces an explicit test case
for the above feature and then leverage it for testing the kernel behavior
for invalid control actions (reject).
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the commit 802bfb19 ("net/sched: user-space can't set
unknown tcfa_action values"), unknown tcfa_action values are
converted to TC_ACT_UNSPEC, but the common agreement is instead
rejecting such configurations.

This change also introduces a helper to simplify the destruction
of a single action, avoiding code duplication.

v1 -> v2:
 - helper is now static and renamed according to act_* convention
 - updated extack message, according to the new behavior

Fixes: 802bfb19 ("net/sched: user-space can't set unknown tcfa_action values")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without a valid of_node in struct device we can't find the mvpp2 port
device by its DT node. Specifically, this breaks
of_find_net_device_by_node().

For example, the Armada 8040 based Clearfog GT-8K uses Marvell 88E6141
switch connected to the &cp1_eth2 port:

&cp1_mdio {
	...

	switch0: switch0@4 {
		compatible = "marvell,mv88e6085";
		...

		ports {
			...

			port@5 {
				reg = <5>;
				label = "cpu";
				ethernet = <&cp1_eth2>;
			};
		};
	};
};

Without this patch, dsa_register_switch() returns -EPROBE_DEFER because
of_find_net_device_by_node() can't find the device_node of the &cp1_eth2
device.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using the fixed PHY with GENET (e.g. MOCA) the PHY link
status can be determined from the internal link status captured
by the MAC. This allows the PHY state machine to use the correct
link state with the fixed PHY even if MAC link event interrupts
are missed when the net device is opened.

Fixes: 8d88c6eb ("net: bcmgenet: enable MoCA link state change detection")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Stratix10 SoC is an AARCH64 based platform that shares the same ethernet
controller that is on other SoCFPGA platforms. Build the platform driver.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sabrina Dubroca says:

====================
ipv6: fix error path of inet6_init()

The error path of inet6_init() can trigger multiple kernel panics,
mostly due to wrong ordering of cleanups. This series fixes those
issues.
====================
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl_unregister_all(PF_INET6) gets called from inet6_init in cases when
no handler has been registered for PF_INET6 yet, for example if
ip6_mr_init() fails. Abort and avoid a NULL pointer deref in that case.

Example of panic (triggered by faking a failure of
 register_pernet_subsys):

    general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
    [...]
    RIP: 0010:rtnl_unregister_all+0x17e/0x2a0
    [...]
    Call Trace:
     ? rtnetlink_net_init+0x250/0x250
     ? sock_unregister+0x103/0x160
     ? kernel_getsockopt+0x200/0x200
     inet6_init+0x197/0x20d

Fixes: e2fddf5e ("[IPV6]: Make af_inet6 to check ip6_route_init return value.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.")
contains an error in the cleanup path of inet6_init(): when
proto_register(&pingv6_prot, 1) fails, we try to unregister
&pingv6_prot. When rawv6_init() fails, we skip unregistering
&pingv6_prot.

Example of panic (triggered by faking a failure of
 proto_register(&pingv6_prot, 1)):

    general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
    [...]
    RIP: 0010:__list_del_entry_valid+0x79/0x160
    [...]
    Call Trace:
     proto_unregister+0xbb/0x550
     ? trace_preempt_on+0x6f0/0x6f0
     ? sock_no_shutdown+0x10/0x10
     inet6_init+0x153/0x1b8

Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 15e66807 ("ipv6: reorder icmpv6_init() and ip6_mr_init()")
moved the cleanup label for ipmr_fail, but should have changed the
contents of the cleanup labels as well. Now we can end up cleaning up
icmpv6 even though it hasn't been initialized (jump to icmp_fail or
ipmr_fail).

Simply undo things in the reverse order of their initialization.

Example of panic (triggered by faking a failure of icmpv6_init):

    kasan: GPF could be caused by NULL-ptr deref or user memory access
    general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
    [...]
    RIP: 0010:__list_del_entry_valid+0x79/0x160
    [...]
    Call Trace:
     ? lock_release+0x8a0/0x8a0
     unregister_pernet_operations+0xd4/0x560
     ? ops_free_list+0x480/0x480
     ? down_write+0x91/0x130
     ? unregister_pernet_subsys+0x15/0x30
     ? down_read+0x1b0/0x1b0
     ? up_read+0x110/0x110
     ? kmem_cache_create_usercopy+0x1b4/0x240
     unregister_pernet_subsys+0x1d/0x30
     icmpv6_cleanup+0x1d/0x30
     inet6_init+0x1b5/0x23f

Fixes: 15e66807 ("ipv6: reorder icmpv6_init() and ip6_mr_init()")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

in the (rare) case of failure in nla_nest_start(), missing NULL checks in
tcf_pedit_key_ex_dump() can make the following command

 # tc action add action pedit ex munge ip ttl set 64

dereference a NULL pointer:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 PGD 800000007d1cd067 P4D 800000007d1cd067 PUD 7acd3067 PMD 0
 Oops: 0002 [#1] SMP PTI
 CPU: 0 PID: 3336 Comm: tc Tainted: G            E     4.18.0.pedit+ #425
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_pedit_dump+0x19d/0x358 [act_pedit]
 Code: be 02 00 00 00 48 89 df 66 89 44 24 20 e8 9b b1 fd e0 85 c0 75 46 8b 83 c8 00 00 00 49 83 c5 08 48 03 83 d0 00 00 00 4d 39 f5 <66> 89 04 25 00 00 00 00 0f 84 81 01 00 00 41 8b 45 00 48 8d 4c 24
 RSP: 0018:ffffb5d4004478a8 EFLAGS: 00010246
 RAX: ffff8880fcda2070 RBX: ffff8880fadd2900 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: ffffb5d4004478ca RDI: ffff8880fcda206e
 RBP: ffff8880fb9cb900 R08: 0000000000000008 R09: ffff8880fcda206e
 R10: ffff8880fadd2900 R11: 0000000000000000 R12: ffff8880fd26cf40
 R13: ffff8880fc957430 R14: ffff8880fc957430 R15: ffff8880fb9cb988
 FS:  00007f75a537a740(0000) GS:ffff8880fda00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007a2fa005 CR4: 00000000001606f0
 Call Trace:
  ? __nla_reserve+0x38/0x50
  tcf_action_dump_1+0xd2/0x130
  tcf_action_dump+0x6a/0xf0
  tca_get_fill.constprop.31+0xa3/0x120
  tcf_action_add+0xd1/0x170
  tc_ctl_action+0x137/0x150
  rtnetlink_rcv_msg+0x263/0x2d0
  ? _cond_resched+0x15/0x40
  ? rtnl_calcit.isra.30+0x110/0x110
  netlink_rcv_skb+0x4d/0x130
  netlink_unicast+0x1a3/0x250
  netlink_sendmsg+0x2ae/0x3a0
  sock_sendmsg+0x36/0x40
  ___sys_sendmsg+0x26f/0x2d0
  ? do_wp_page+0x8e/0x5f0
  ? handle_pte_fault+0x6c3/0xf50
  ? __handle_mm_fault+0x38e/0x520
  ? __sys_sendmsg+0x5e/0xa0
  __sys_sendmsg+0x5e/0xa0
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f75a4583ba0
 Code: c3 48 8b 05 f2 62 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d fd c3 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24
 RSP: 002b:00007fff60ee7418 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007fff60ee7540 RCX: 00007f75a4583ba0
 RDX: 0000000000000000 RSI: 00007fff60ee7490 RDI: 0000000000000003
 RBP: 000000005b842d3e R08: 0000000000000002 R09: 0000000000000000
 R10: 00007fff60ee6ea0 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007fff60ee7554 R14: 0000000000000001 R15: 000000000066c100
 Modules linked in: act_pedit(E) ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul ext4 crc32_pclmul mbcache ghash_clmulni_intel jbd2 pcbc snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer cryptd glue_helper snd joydev pcspkr soundcore virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk virtio_console failover qxl crc32c_intel drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix virtio_pci libata virtio_ring i2c_core virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_pedit]
 CR2: 0000000000000000

Like it's done for other TC actions, give up dumping pedit rules and return
an error if nla_nest_start() returns NULL.

Fixes: 71d0ed70 ("net/act_pedit: Support using offset relative to the conventional network headers")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the R7S9210 which is part of the RZ/A2 series.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Peng Li says:

====================
net: hns: fix some bugs about speed and duplex change

If there are packets in hardware when changing the spped
or duplex, it may cause hardware hang up.

This patchset adds the code for waiting chip to clean the all
pkts(TX & RX) in chip when the driver uses the function named
"adjust link".

This patchset cleans the pkts as follows:
1) close rx of chip, close tx of protocol stack.
2) wait rcb, ppe, mac to clean.
3) adjust link
4) open rx of chip, open tx of protocol stack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If there are packets in hardware when changing the speed
or duplex, it may cause hardware hang up.

This patch adds netif_carrier_off before change speed and
duplex in ethtool_ops.set_link_ksettings, and adds
netif_carrier_on after complete the change.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If there are packets in hardware when changing the speed
or duplex, it may cause hardware hang up.

This patch adds the code for waiting chip to clean the all
pkts(TX & RX) in chip when the driver uses the function named
"adjust link".

This patch cleans the pkts as follows:
1) close rx of chip, close tx of protocol stack.
2) wait rcb, ppe, mac to clean.
3) adjust link
4) open rx of chip, open tx of protocol stack.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I have two Ethernet adapters:
  r8169 0000:03:01.0 eth0: RTL8169sb/8110sb, 00:14:d1:14:2d:49, XID 10000000, IRQ 18
  r8169 0000:01:00.0 eth0: RTL8168e/8111e, 64:66:b3:11:14:5d, XID 2c200000, IRQ 30
And after upgrading from linux 4.15 [1] to linux 4.18+ [2] RTL8169sb failed to
receive any packets. tcpdump shows a lot of checksum mismatch.

  [1]: a0f79386
  [2]: 05193597 (4.19 merge window opened)

I started bisecting and the found that [3] breaks it. According to [4]:
  "For 8110S, 8110SB, and 8110SC series, the initial value of RxConfig
  needs to be set after the tx/rx is enabled."
So I moved rtl_init_rxcfg() after enabling tx/rs and now my adapter works
(RTL8168e works too).

  [3]: 3559d81e
  [4]: e542a226 ("r8169: adjust the RxConfig
settings.")

Also drop "rx" from rtl_set_rx_tx_config_registers(), since it does nothing
with it already.

Fixes: 3559d81e ("r8169: simplify
rtl_hw_start_8169")

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported a use-after-free in tipc_group_fill_sock_diag(),
where tipc_group_fill_sock_diag() still reads tsk->group meanwhile
tipc_group_delete() just deletes it in tipc_release().

tipc_nl_sk_walk() aims to lock this sock when walking each sock
in the hash table to close race conditions with sock changes like
this one, by acquiring tsk->sk.sk_lock.slock spinlock, unfortunately
this doesn't work at all. All non-BH call path should take
lock_sock() instead to make it work.

tipc_nl_sk_walk() brutally iterates with raw rht_for_each_entry_rcu()
where RCU read lock is required, this is the reason why lock_sock()
can't be taken on this path. This could be resolved by switching to
rhashtable iterator API's, where taking a sleepable lock is possible.
Also, the iterator API's are friendly for restartable calls like
diag dump, the last position is remembered behind the scence,
all we need to do here is saving the iterator into cb->args[].

I tested this with parallel tipc diag dump and thousands of tipc
socket creation and release, no crash or memory leak.

Reported-by: syzbot+b9c8f3ab2994b7cd1625@syzkaller.appspotmail.com
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 4ae0169f.

This change in the handling of the coalesce timer is causing regression on
(at least) amlogic platforms.

Network will break down very quickly (a few seconds) after starting
a download. This can easily be reproduced using iperf3 for example.

The problem has been reported on the S805, S905, S912 and A113 SoCs
(Realtek and Micrel PHYs) and it is likely impacting all Amlogics
platforms using Gbit ethernet

No problem was seen with the platform using 10/100 only PHYs (GXL internal)

Reverting change brings things back to normal and allows to use network
again until we better understand the problem with the coalesce timer.

Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rhashtable_walk_exit() must be paired with rhashtable_walk_enter().

Fixes: 40f9f439 ("tipc: Fix tipc_sk_reinit race conditions")
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before the commit d6990976 ("vti6: fix PMTU caching and reporting
on xmit") '!skb->ignore_df' check was always true because the function
skb_scrub_packet() was called before it, resetting ignore_df to zero.

In the commit, skb_scrub_packet() was moved below, and now this check
can be false for the packet, e.g. when sending it in the two fragments,
this prevents successful PMTU updates in such case. The next attempts
to send the packet lead to the same tx error. Moreover, vti6 initial
MTU value relies on PMTU adjustments.

This issue can be reproduced with the following LTP test script:
    udp_ipsec_vti.sh -6 -p ah -m tunnel -s 2000

Fixes: ccd740cb ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-08-29

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a build error in sk_reuseport_convert_ctx_access() when
   compiling with clang which cannot resolve hweight_long() at
   build time inside the BUILD_BUG_ON() assertion, from Stefan.

2) Several fixes for BPF sockmap, four of them in getting the
   bpf_msg_pull_data() helper to work, one use after free case
   in bpf_tcp_close() and one refcount leak in bpf_tcp_recvmsg(),
   from Daniel.

3) Another fix for BPF sockmap where we misaccount sk_mem_uncharge()
   in the socket redirect error case from unwinding scatterlist
   twice, from John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
This set contains three more fixes for the bpf_msg_pull_data()
mainly for correcting scatterlist ring wrap-arounds as well as
fixing up data pointers. For details please see individual patches.
Thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When we perform the sg shift repair for the scatterlist ring, we
currently start out at i = first_sg + 1. However, this is not
correct since the first_sg could point to the sge sitting at slot
MAX_SKB_FRAGS - 1, and a subsequent i = MAX_SKB_FRAGS will access
the scatterlist ring (sg) out of bounds. Add the sk_msg_iter_var()
helper for iterating through the ring, and apply the same rule
for advancing to the next ring element as we do elsewhere. Later
work will use this helper also in other places.

Fixes: 015632bb ("bpf: sk_msg program helper bpf_sk_msg_pull_data")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

If first_sg and last_sg wraps around in the scatterlist ring, then we
need to account for that in the shift as well. E.g. crafting such msgs
where this is the case leads to a hang as shift becomes negative. E.g.
consider the following scenario:

  first_sg := 14     |=>    shift := -12     msg->sg_start := 10
  last_sg  :=  3     |                       msg->sg_end   :=  5

round  1:  i := 15, move_from :=   3, sg[15] := sg[  3]
round  2:  i :=  0, move_from := -12, sg[ 0] := sg[-12]
round  3:  i :=  1, move_from := -11, sg[ 1] := sg[-11]
round  4:  i :=  2, move_from := -10, sg[ 2] := sg[-10]
[...]
round 13:  i := 11, move_from :=  -1, sg[ 2] := sg[ -1]
round 14:  i := 12, move_from :=   0, sg[ 2] := sg[  0]
round 15:  i := 13, move_from :=   1, sg[ 2] := sg[  1]
round 16:  i := 14, move_from :=   2, sg[ 2] := sg[  2]
round 17:  i := 15, move_from :=   3, sg[ 2] := sg[  3]
[...]

This means we will loop forever and never hit the msg->sg_end condition
to break out of the loop. When we see that the ring wraps around, then
the shift should be MAX_SKB_FRAGS - first_sg + last_sg - 1. Meaning,
the remainder slots from the tail of the ring and the head until last_sg
combined.

Fixes: 015632bb ("bpf: sk_msg program helper bpf_sk_msg_pull_data")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In the current code, msg->data is set as sg_virt(&sg[i]) + start - offset
and msg->data_end relative to it as msg->data + bytes. Using iterator i
to point to the updated starting scatterlist element holds true for some
cases, however not for all where we'd end up pointing out of bounds. It
is /correct/ for these ones:

1) When first finding the starting scatterlist element (sge) where we
   find that the page is already privately owned by the msg and where
   the requested bytes and headroom fit into the sge's length.

However, it's /incorrect/ for the following ones:

2) After we made the requested area private and updated the newly allocated
   page into first_sg slot of the scatterlist ring; when we find that no
   shift repair of the ring is needed where we bail out updating msg->data
   and msg->data_end. At that point i will point to last_sg, which in this
   case is the next elem of first_sg in the ring. The sge at that point
   might as well be invalid (e.g. i == msg->sg_end), which we use for
   setting the range of sg_virt(&sg[i]). The correct one would have been
   first_sg.

3) Similar as in 2) but when we find that a shift repair of the ring is
   needed. In this case we fix up all sges and stop once we've reached the
   end. In this case i will point to will point to the new msg->sg_end,
   and the sge at that point will be invalid. Again here the requested
   range sits in first_sg.

Fixes: 015632bb ("bpf: sk_msg program helper bpf_sk_msg_pull_data")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

While recently going over bpf_msg_pull_data(), I noticed three
issues which are fixed in here:

1) When we attempt to find the first scatterlist element (sge)
   for the start offset, we add len to the offset before we check
   for start < offset + len, whereas it should come after when
   we iterate to the next sge to accumulate the offsets. For
   example, given a start offset of 12 with a sge length of 8
   for the first sge in the list would lead us to determine this
   sge as the first sge thinking it covers first 16 bytes where
   start is located, whereas start sits in subsequent sges so
   we would end up pulling in the wrong data.

2) After figuring out the starting sge, we have a short-cut test
   in !msg->sg_copy[i] && bytes <= len. This checks whether it's
   not needed to make the page at the sge private where we can
   just exit by updating msg->data and msg->data_end. However,
   the length test is not fully correct. bytes <= len checks
   whether the requested bytes (end - start offsets) fit into the
   sge's length. The part that is missing is that start must not
   be sge length aligned. Meaning, the start offset into the sge
   needs to be accounted as well on top of the requested bytes
   as otherwise we can access the sge out of bounds. For example
   the sge could have length of 8, our requested bytes could have
   length of 8, but at a start offset of 4, so we also would need
   to pull in 4 bytes of the next sge, when we jump to the out
   label we do set msg->data to sg_virt(&sg[i]) + start - offset
   and msg->data_end to msg->data + bytes which would be oob.

3) The subsequent bytes < copy test for finding the last sge has
   the same issue as in point 2) but also it tests for less than
   rather than less or equal to. Meaning if the sge length is of
   8 and requested bytes of 8 while having the start aligned with
   the sge, we would unnecessarily go and pull in the next sge as
   well to make it private.

Fixes: 015632bb ("bpf: sk_msg program helper bpf_sk_msg_pull_data")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>