This patch adds debug support for imx platforms. This is important in
order to gather information about the state of the DSP in case of an
oops and the reason for the oops.

This is done by checking if a message with a panic code has been placed
in the debug box, in the imx8_dsp_handle_request function from sof/imx.

If positive, the function imx8_dump, added in common, will be called.
The first step is to gather information about the registers, filename,
line number and stack by calling the imx8_get_registers, added in common.
Then the information will be printed to the console by calling the
get_status function.
Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: SOF: DSP core management fixes for 5.10" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

This series contains some improvements to how DSP core management
is done in SOF, and adds a distinction between cores managed by
the host versus cores managed by the DSP.

Pierre-Louis Bossart (1):
  ASoC: SOF: Intel: hda-loader: s/master/primary

Ranjani Sridharan (3):
  ASoC: SOF: rename cores_mask to host_managed_cores_mask
  ASoC: SOF: Intel: hda: modify core_power_up/down op
  ASoC: SOF: Intel: remove the  HDA_DSP_CORE_MASK() macro

 sound/soc/sof/intel/apl.c        |  2 +-
 sound/soc/sof/intel/bdw.c        |  2 +-
 sound/soc/sof/intel/byt.c        |  6 +++---
 sound/soc/sof/intel/cnl.c        | 15 ++++-----------
 sound/soc/sof/intel/hda-dsp.c    | 20 +++++++++++++++++---
 sound/soc/sof/intel/hda-loader.c | 11 +++++------
 sound/soc/sof/intel/hda.c        |  2 +-
 sound/soc/sof/intel/hda.h        |  3 ---
 sound/soc/sof/intel/shim.h       |  2 +-
 sound/soc/sof/intel/tgl.c        |  2 +-
 10 files changed, 34 insertions(+), 31 deletions(-)

--
2.27.0

Merge series "ASoC: mediatek: mt8183-da7219: support machine driver for rt1015p" from Tzung-Bi Shih <tzungbi@google.com>:

The series reuses mt8183-da7219-max98357.c for supporting machine
driver with rt1015p speaker amplifier.

The 1st patch adds document for the new proposed compatible string.

The 2nd patch changes the machine driver to support "RT1015P" codec.

Tzung-Bi Shih (2):
  ASoC: dt-bindings: mt8183-da7219: add compatible string for using
    rt1015p
  ASoC: mediatek: mt8183-da7219: support machine driver with rt1015p

 .../bindings/sound/mt8183-da7219-max98357.txt |  1 +
 sound/soc/mediatek/Kconfig                    |  1 +
 .../mediatek/mt8183/mt8183-da7219-max98357.c  | 40 +++++++++++++++++++
 3 files changed, 42 insertions(+)

--
2.28.0.526.ge36021eeef-goog

Merge series "ASoC: ti: j721e-evm: Support for j7200 variant" from Peter Ujfalusi <peter.ujfalusi@ti.com>:

Hi,

Changes since v1:
- Suffix the 2359296000 constant with 'u' to silence C90 warning

When j7200 SOM is connected to the CPB, the audio setup is a bit different:
Only 48KHz family have clock path, 44.1KHz is not supported.

Update the binding documentation and add support for the j7200 version of CPB
to the driver.

Regards,
Peter
---
Peter Ujfalusi (2):
  ASoC: dt-bindings: ti,j721e-cpb-audio: Document support for j7200-cpb
  ASoC: ti: j721e-evm: Add support for j7200-cpb audio

 .../bindings/sound/ti,j721e-cpb-audio.yaml    | 92 ++++++++++++++-----
 sound/soc/ti/j721e-evm.c                      | 11 +++
 2 files changed, 81 insertions(+), 22 deletions(-)

--
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Enable support of pm_runtime on STM32 SAI driver to allow
SAI power state monitoring.
pm_runtime_put_autosuspend() is called from ASoC framework
on pcm device close.
The pmdown_time delay is available in runtime context, and may be set
in SAI driver to take into account shutdown delay on playback.
However, this shutdown delay is already handled in the DAPMs
of the audio codec linked to SAI CPU DAI.
So, the choice is made, not to support this delay on CPU DAI side.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200911081507.7276-1-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

The variable bclk_rate is checked in:
  if (bclk_rate && mclk_rate % bclk_rate)

This indicates that bclk_rate can be zero.
If so, a divide-by-zero bug will occur:
  div_bclk = mclk_rate / bclk_rate;

To fix this possible bug, the function returns -EINVAL when bclk_rate is
zero.
Signed-off-by: Tuo Li <tuoli96@outlook.com>
Link: https://lore.kernel.org/r/TY2PR04MB4029799E60A5BCAAD5B7B5BBB8280@TY2PR04MB4029.apcprd04.prod.outlook.comSigned-off-by: Mark Brown <broonie@kernel.org>

DMI product name is used to support system variants based out of
tgl_max98373_rt5682 in current implementation. Replace this DMI search with
DMI_OEM_STRING. Coreboot(BIOS used in these systems) is
setting the needed DMI_OEM_STRING field to uniquely identify these
systems.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910162705.2026036-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use inclusive language for DSP cores.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-5-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the HDA_DSP_CORE_MASK() macro and use BIT() and GENMASK()
macros directly for more clarity.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Modify the core_power_up/down ops for HDA platforms to restrict
the core_mask to the ones allowed by chip->cores_mask. This is needed
because on some HDA platforms not all cores can be powered up/down
by the host and this must be handled internally in the FW.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Rename the cores_mask in struct sof_intel_dsp_desc to
host_managed_cores_mask to be more indicative of the fact that
only these cores can be powered up/down by the host.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When j7200 SOM is attached to the CPB we only have parent clock for 48KHz
family and the rate of the parent clock is 2359296000Hz.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200910124110.19361-3-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

j721e or j7200 SOM can be attached to the same Common Processor Board (CPB)

With the j7200 SOM only the 48KHz family parent clock is available and
McASP0 is used for the audio.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200910124110.19361-2-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Supports machine driver with rt1015p ("mt8183_da7219_rt1015p").
Embeds in the existing mt8183-da7219-max98357.c because they share
most of the code.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200911024833.1673961-3-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Machines with rt1015p should use the compatible string
"mediatek,mt8183_da7219_rt1015p".
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200911024833.1673961-2-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: q6dsp: Add support to Codec Ports." from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

LPASS IP on SoCs like SM8250 has Digital Codec part integrated into it.
This ports are exposed in Q6DSP as Codec ports. This patchset adds
support to those q6afe ports along with q6routing and q6afe-dai.

This patchset has been tested along with other patches on
Qualcomm Robotics RB5 Platform with Soundwire and WSA8815 Codec.

Thanks,
srini

Srinivas Kandagatla (8):
  ASoC: q6dsp: q6afe: add support to Codec DMA ports
  ASoC: q6dsp: q6routing: add support to Codec DMA ports
  ASoC: q6dsp: q6afe: prepare afe_apr_send_pkt to take response opcode
  ASoC: q6dsp: q6afe: add global q6afe waitqueue
  ASoC: q6dsp: q6afe: add lpass hw voting support
  ASoC: q6dsp: q6afe: update q6afe_set_param to support global clocks
  ASoC: q6dsp: q6afe: add codec lpass clocks
  ASoC: q6dsp: q6afe-dai: add support to Codec DMA ports

 include/dt-bindings/sound/qcom,q6afe.h |  22 ++
 sound/soc/qcom/qdsp6/q6afe-dai.c       | 229 ++++++++++++++++++
 sound/soc/qcom/qdsp6/q6afe.c           | 308 +++++++++++++++++++++++--
 sound/soc/qcom/qdsp6/q6afe.h           |  33 ++-
 sound/soc/qcom/qdsp6/q6routing.c       | 121 +++++++++-
 5 files changed, 689 insertions(+), 24 deletions(-)

--
2.21.0

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-9-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

LPASS now has integrated codec control whose clocks are controlled by Q6DSP.
This patch adds support to those clocks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-8-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Previously there was no case where we need to set clock or send commands
that are not associated with q6afe ports, now we have cases like clock
voting and clock consumers like codecs that needed these clocks.

update q6afe_set_param() to support such cases, including token passing.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-7-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-6-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

In some cases like clocks q6afe would have to process commands
without an associated q6afe port, in such cases waitqueue is
required at global level to wait for the command to finish.
This patch also adds the command result to go with this waitqueue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-5-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Update afe_apr_send_pkt() to take response opcode that it should wait for.
This is helpful in cases where we expect response other than the
actual command opcode.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-4-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

New LPASS supports various codec macros, DSP firmware already
has support to those ports. Add corresponding configuration
support to those ports in adsp drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Adds DT binding document for rt1015p.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200910042949.3795682-3-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Adds rt1015p codec driver.

Rt1015p is a rt1015 variant.
- It doesn't support I2C.
- It only supports S24, 48kHz, 64FS.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200910042949.3795682-2-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds DT bindings for the new Microchip S/PDIF TX Controller
embedded inside sama7g5 SoCs.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200909145348.367033-1-codrin.ciubotariu@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

The new SPDIF TX controller is a serial port compliant with the IEC-
60958 standard. It also supports programmable User Data and Channel
Status fields.

This IP is embedded in Microchip's sama7g5 SoC.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200909145348.367033-2-codrin.ciubotariu@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

The tasklet is an old API that should be deprecated, usually can be
converted to another decent API.  In ASoC TXx9 ACLC driver, a tasklet
is still used for offloading the hardware reset function.  It can be
achieved gracefully with a work queued, too.

This patch replaces the tasklet usage in TXx9 ACLC driver with a
simple work.  The conversion is fairly straightforward.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200903104749.21435-4-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

The tasklet is an old API that should be deprecated, usually can be
converted to another decent API.  In ASoC SH SIU driver, a tasklet is
still used for offloading the hardware reset function.  It can be
achieved gracefully with a work queued, too.

This patch replaces the tasklet usage in SH SIU driver with a simple
work.  The conversion is fairly straightforward.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200903104749.21435-3-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

The tasklet is an old API that should be deprecated, usually can be
converted to another decent API.  In ASoC FSL ESAI CPU DAI driver, a
tasklet is still used for offloading the hardware reset function.
It can be achieved gracefully with a work queued, too.

This patch replaces the tasklet usage in fsl esai driver with a simple
work.  The conversion is fairly straightforward.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200903104749.21435-2-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'topic/tasklet-convert' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.10

Merge series "ASoC: qcom: common: Parse auxiliary devices from device tree" from Stephan Gerhold <stephan@gerhold.net>:

In some cases we need to probe additional audio components that do
not appear as part of the DAI links specified in the device tree.
Examples for this are auxiliary devices such as analog amplifiers
or codecs.

The ASoC core provides a way to probe these components by adding
them to snd_soc_card->aux_dev.

This patch set allows specifying them in the device tree through
a new "aux-devs" property.

v1: https://lore.kernel.org/linux-arm-msm/20200819091533.2334-1-stephan@gerhold.net/
Changes in v2:
  - Fix value type in device tree bindings:
    aux-devs should be array of phandles without any arguments, so change
    <phandles with arguments> -> <array of phandles>

Stephan Gerhold (2):
  ASoC: dt-bindings: qcom: Document "aux-devs" property
  ASoC: qcom: common: Parse auxiliary devices from device tree

 .../devicetree/bindings/sound/qcom,apq8016-sbc.txt        | 7 +++++++
 Documentation/devicetree/bindings/sound/qcom,apq8096.txt  | 8 ++++++++
 Documentation/devicetree/bindings/sound/qcom,sdm845.txt   | 8 ++++++++
 sound/soc/qcom/common.c                                   | 4 ++++
 4 files changed, 27 insertions(+)

--
2.28.0

if of_find_device_by_node() succeed, imx_es8328_probe() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.

Fixes: 7e7292db ("ASoC: fsl: add imx-es8328 machine driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200825130224.1488694-1-yukuai3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

In some cases we need to probe additional audio components that do
not appear as part of the DAI links specified in the device tree.
Examples for this are auxiliary devices such as analog amplifiers
or codecs.

The ASoC core provides a way to probe these components by adding
them to snd_soc_card->aux_dev. We can use the snd_soc_of_parse_aux_devs()
function to parse them from the device tree.

As an example for this, some MSM8916 smartphones have an analog
speaker amplifier connected to the HPHR output. With the new property
this can be modelled as follows:

	speaker-amp: audio-amplifier {
		compatible = "simple-audio-amplifier";
		enable-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
		sound-name-prefix = "Speaker Amp";
	};

	&sound {
		aux-devs = <&speaker_amp>;
		audio-routing = "Speaker Amp IN", "HPHR";
	};

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200826095141.94017-3-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

In some cases we need to probe additional audio components that do
not appear as part of the DAI links specified in the device tree.
Examples for this are auxiliary devices such as analog amplifiers
or codecs.

To make them work they need to be added as part of "aux-devs"
and connected to some other audio component using the audio routes
configurable using "(qcom,)audio-routing".

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200826095141.94017-2-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

Mt6359 platform device is instantiated by mfd_add_devices().  In the
case, dev->of_node is NULL so that mt6359_parse_dt() always fails to
parse the desired DT properties.

Gets the DT properties via dev->parent->of_node.

Fixes: 8061734a ("ASoC: mediatek: mt6359: add codec driver")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200908070044.1142644-1-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch implements the snd_sof_bytes_ext_volatile_get() to read the
actual parameters from DSP by sending the SOF_IPC_COMP_GET_DATA IPC
for the kcontrol of type SOF_TPLG_KCTL_BYTES_VOLATILE_RO.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200908092825.1813847-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds support for write-only and read-only TLV byte kcontrols
by checking for appropriate get/put IO handlers.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200908092825.1813847-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The initial machine driver supports only j721e-cpb and the ivi addon, but
other EVMs for different K3 SoC can have similar audio setup which can
be supported by the driver with small or no modification.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200908113204.12012-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>