- 16 Feb, 2016 10 commits
-
-
Andrey Smetanin authored
VMBus hypercall codes inside Hyper-V UAPI header will be used by QEMU to implement VMBus host devices support. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Joerg Roedel <joro@8bytes.org> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org [Do not rename the constant at the same time as moving it, as that would cause semantic conflicts with the Hyper-V tree. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Rename HV_X64_HV_NOTIFY_LONG_SPIN_WAIT by HVCALL_NOTIFY_LONG_SPIN_WAIT, so the name is more consistent with the other hypercalls. Signed-off-by:
-
Paolo Bonzini authored
Sometimes when setting a breakpoint a process doesn't stop on it. This is because the debug registers are not loaded correctly on VCPU load. The following simple reproducer from Oleg Nesterov tries using debug registers in both the host and the guest, for example by running "./bp 0 1" on the host and "./bp 14 15" under QEMU. #include <unistd.h> #include <signal.h> #include <stdlib.h> #include <stdio.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <sys/user.h> #include <asm/debugreg.h> #include <assert.h> #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len) { unsigned long dr7; dr7 = ((len | type) & 0xf) << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE); if (enable) dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE)); return dr7; } int write_dr(int pid, int dr, unsigned long val) { return ptrace(PTRACE_POKEUSER, pid, offsetof (struct user, u_debugreg[dr]), val); } void set_bp(pid_t pid, void *addr) { unsigned long dr7; assert(write_dr(pid, 0, (long)addr) == 0); dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1); assert(write_dr(pid, 7, dr7) == 0); } void *get_rip(int pid) { return (void*)ptrace(PTRACE_PEEKUSER, pid, offsetof(struct user, regs.rip), 0); } void test(int nr) { void *bp_addr = &&label + nr, *bp_hit; int pid; printf("test bp %d\n", nr); assert(nr < 16); // see 16 asm nops below pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); kill(getpid(), SIGSTOP); for (;;) { label: asm ( "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" ); } } assert(pid == wait(NULL)); set_bp(pid, bp_addr); for (;;) { assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0); assert(pid == wait(NULL)); bp_hit = get_rip(pid); if (bp_hit != bp_addr) fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n", bp_hit - &&label, nr); } } int main(int argc, const char *argv[]) { while (--argc) { int nr = atoi(*++argv); if (!fork()) test(nr); } while (wait(NULL) > 0) ; return 0; } Cc: stable@vger.kernel.org Suggested-by:Nadadv Amit <namit@cs.technion.ac.il> Reported-by:
Andrey Wagin <avagin@gmail.com> Signed-off-by:
-
Radim Krčmář authored
Smatch noticed a NULL dereference in kvm_intr_is_single_vcpu_fast that happens if VM already warned about invalid lowest-priority interrupt. Create a function for common code while fixing it. Fixes: 6228a0da ("KVM: x86: Add lowest-priority support for vt-d posted-interrupts") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
This is the same as before: kvm_scale_tsc(tgt_tsc_khz) = tgt_tsc_khz * ratio = tgt_tsc_khz * user_tsc_khz / tsc_khz (see set_tsc_khz) = user_tsc_khz (see kvm_guest_time_update) = vcpu->arch.virtual_tsc_khz (see kvm_set_tsc_khz) However, computing it through kvm_scale_tsc will make it possible to include the NTP correction in tgt_tsc_khz. Reviewed-by:Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
This refers to the desired (scaled) frequency, which is called user_tsc_khz in the rest of the file. Reviewed-by:
-
Jan Kiszka authored
When we take a #DB or #BP vmexit while in guest mode, we first of all need to check if there is ongoing guest debugging that might be interested in the event. Currently, we unconditionally leave L2 and inject the event into L1 if it is intercepting the exceptions. That breaks things marvelously. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Jan Kiszka authored
There is quite some common code in all these is_<exception>() helpers. Factor it out before adding even more of them. Signed-off-by:
-
Christian Borntraeger authored
Right now halt_poll_ns can be change during runtime. The grow and shrink factors can only be set during module load. Lets fix several aspects of grow shrink: - make grow/shrink changeable by root - make all variables unsigned int - read the variables once to prevent races Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes and features for kvm/next (4.6) 1. also provide the floating point registers via sync regs 2. Separate out intruction vs. data accesses 3. Fix program interrupts in some cases 4. Documentation fixes 5. dirty log improvements for huge guests
-
- 10 Feb, 2016 18 commits
-
-
Christian Borntraeger authored
A KVM_GET_DIRTY_LOG ioctl might take a long time. This can result in fatal signals seemingly being ignored. Lets bail out during the dirty bit sync, if a fatal signal is pending. Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
When doing dirty logging on huge guests (e.g.600GB) we sometimes get rcu stall timeouts with backtraces like [ 2753.194083] ([<0000000000112fb2>] show_trace+0x12a/0x130) [ 2753.194092] [<0000000000113024>] show_stack+0x6c/0xe8 [ 2753.194094] [<00000000001ee6a8>] rcu_pending+0x358/0xa48 [ 2753.194099] [<00000000001f20cc>] rcu_check_callbacks+0x84/0x168 [ 2753.194102] [<0000000000167654>] update_process_times+0x54/0x80 [ 2753.194107] [<00000000001bdb5c>] tick_sched_handle.isra.16+0x4c/0x60 [ 2753.194113] [<00000000001bdbd8>] tick_sched_timer+0x68/0x90 [ 2753.194115] [<0000000000182a88>] __run_hrtimer+0x88/0x1f8 [ 2753.194119] [<00000000001838ba>] hrtimer_interrupt+0x122/0x2b0 [ 2753.194121] [<000000000010d034>] do_extint+0x16c/0x170 [ 2753.194123] [<00000000005e206e>] ext_skip+0x38/0x3e [ 2753.194129] [<000000000012157c>] gmap_test_and_clear_dirty+0xcc/0x118 [ 2753.194134] ([<00000000001214ea>] gmap_test_and_clear_dirty+0x3a/0x118) [ 2753.194137] [<0000000000132da4>] kvm_vm_ioctl_get_dirty_log+0xd4/0x1b0 [ 2753.194143] [<000000000012ac12>] kvm_vm_ioctl+0x21a/0x548 [ 2753.194146] [<00000000002b57f6>] do_vfs_ioctl+0x30e/0x518 [ 2753.194149] [<00000000002b5a9c>] SyS_ioctl+0x9c/0xb0 [ 2753.194151] [<00000000005e1ae6>] sysc_tracego+0x14/0x1a [ 2753.194153] [<000003ffb75f3972>] 0x3ffb75f3972 We should do a cond_resched in here. Signed-off-by:
-
Christian Borntraeger authored
Dirty log query can take a long time for huge guests. Holding the mmap_sem for very long times can cause some unwanted latencies. Turns out that we do not need to hold the mmap semaphore. We hold the slots_lock for gfn->hva translation and walk the page tables with that address, so no need to look at the VMAs. KVM also holds a reference to the mm, which should prevent other things going away. During the walk we take the necessary ptl locks. Signed-off-by:
-
Cornelia Huck authored
The interface for adapter mappings was designed with code in mind that maps each address only once; let's document this. Otherwise, duplicate mappings are added to the list, which makes the code ineffective and uses up the limited amount of mapping needlessly. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
David Hildenbrand authored
Let's properly document KVM_S390_VM_CRYPTO and its attributes. Signed-off-by:
-
David Hildenbrand authored
Let's properly document KVM_S390_VM_TOD and its attributes. Reviewed-by:
-
David Hildenbrand authored
Since commit 9977e886 ("s390/kernel: lazy restore fpu registers"), vregs in struct sie_page is unsed. We can safely remove the field and the definition. Signed-off-by:
-
David Hildenbrand authored
On instruction-fetch exceptions, we have to forward the PSW by any valid ilc and correctly use that ilc when injecting the irq. Injection will already take care of rewinding the PSW if we injected a nullifying program irq, so we don't need special handling prior to injection. Until now, autodetection would have guessed an ilc of 0. Reviewed-by:
-
David Hildenbrand authored
On SIE faults, the ilc cannot be detected automatically, as the icptcode is 0. The ilc indicated in the program irq will always be 0. Therefore we have to manually specify the ilc in order to tell the guest which ilen was used when forwarding the PSW. Reviewed-by:
-
David Hildenbrand authored
Program irq injection during program irq intercepts is the last candidates that injects nullifying irqs and relies on delivery to do the right thing. As we should not rely on the icptcode during any delivery (because that value will not be migrated), let's add a flag, telling prog IRQ delivery to not rewind the PSW in case of nullifying prog IRQs. Signed-off-by:
-
David Hildenbrand authored
__extract_prog_irq() is used only once for getting the program check data in one place. Let's combine it with an injection function to avoid a memset and to prevent misuse on injection by simplifying the interface to only have the VCPU as parameter. Reviewed-by:
-
David Hildenbrand authored
Let's use our fresh new function read_guest_instr() to access guest storage via the correct addressing schema. Reviewed-by:
-
David Hildenbrand authored
When an instruction is to be fetched, special handling applies to secondary-space mode and access-register mode. The instruction is to be fetched from primary space. We can easily support this by selecting the right asce for translation. Access registers will never be used during translation, so don't include them in the interface. As we only want to read from the current PSW address for now, let's also hide that detail. Reviewed-by:
-
David Hildenbrand authored
We will need special handling when fetching instructions, so let's introduce new guest access modes GACC_FETCH and GACC_STORE instead of a write flag. An additional patch will then introduce GACC_IFETCH. Reviewed-by:
-
David Hildenbrand authored
We have to migrate the program irq ilc and someday we will have to specify the ilc without KVM trying to autodetect the value. Let's reuse one of the spare fields in our program irq that should always be set to 0 by user space. Because we also want to make use of 0 ilcs ("not available"), we need a validity indicator. If no valid ilc is given, we try to autodetect the ilc via the current icptcode and icptstatus + parameter and store the valid ilc in the irq structure. This has a nice effect: QEMU's making use of KVM_S390_IRQ / KVM_S390_SET_IRQ_STATE / KVM_S390_GET_IRQ_STATE for migration will directly migrate the ilc without any changes. Please note that we use bit 0 as validity and bit 1,2 for the ilc, so by applying the ilc mask we directly get the ilen which is usually what we work with. Reviewed-by: -
David Hildenbrand authored
We have some confusion about ilc vs. ilen in our current code. So let's correctly use the term ilen when dealing with (ilc << 1). Program irq injection didn't take care of the correct ilc in case of irqs triggered by EXECUTE functions, let's provide one function kvm_s390_get_ilen() to take care of all that. Also, manually specifying in intercept handlers the size of the instruction (and sometimes overwriting that value for EXECUTE internally) doesn't make too much sense. So also provide the functions: - kvm_s390_retry_instr to retry the currently intercepted instruction - kvm_s390_rewind_psw to rewind the PSW without internal overwrites - kvm_s390_forward_psw to forward the PSW Reviewed-by:
-
David Hildenbrand authored
As we already store the floating point registers in the vector save area in floating point register format when we don't have MACHINE_HAS_VX, we can directly expose them to user space using a new sync flag. The floating point registers will be valid when KVM_SYNC_FPRS is set. The fpc will also be valid when KVM_SYNC_FPRS is set. Either KVM_SYNC_FPRS or KVM_SYNC_VRS will be enabled, never both. Let's also change two positions where we access vrs, making the code easier to read and one comment superfluous. Suggested-by:
-
David Hildenbrand authored
If we have MACHINE_HAS_VX, the floating point registers are stored in the vector register format, event if the guest isn't enabled for vector registers. So we can allow KVM_SYNC_VRS as soon as MACHINE_HAS_VX is available. This can in return be used by user space to support floating point registers via struct kvm_run when the machine has vector registers. Signed-off-by:
-
- 09 Feb, 2016 8 commits
-
-
Paolo Bonzini authored
Different pieces of code checked for vcpu->arch.apic being (non-)NULL, or used kvm_vcpu_has_lapic (more optimized) or lapic_in_kernel. Replace everything with lapic_in_kernel's name and kvm_vcpu_has_lapic's implementation. Reviewed-by:
-
Paolo Bonzini authored
Do for kvm_cpu_has_pending_timer and kvm_inject_pending_timer_irqs what the other irq.c routines have been doing. Reviewed-by:
-
Paolo Bonzini authored
Usually the in-kernel APIC's existence is checked in the caller. Do not bother checking it again in lapic.c. Reviewed-by:
-
Feng Wu authored
Add host irq information in trace event, so we can better understand which irq is in posted mode. Signed-off-by:
Feng Wu <feng.wu@intel.com> Reviewed-by:
-
Feng Wu authored
Use vector-hashing to deliver lowest-priority interrupts for VT-d posted-interrupts. This patch extends kvm_intr_is_single_vcpu() to support lowest-priority handling. Signed-off-by:
-
Feng Wu authored
Use vector-hashing to deliver lowest-priority interrupts, As an example, modern Intel CPUs in server platform use this method to handle lowest-priority interrupts. Signed-off-by:
-
Feng Wu authored
When the interrupt is not single destination any more, we need to change back IRTE to remapped mode explicitly. Signed-off-by:
-
Paolo Bonzini authored
This is similar to the existing div_frac function, but it returns the remainder too. Unlike div_frac, it can be used to implement long division, e.g. (a << 64) / b for 32-bit a and b. Signed-off-by:
-
- 08 Feb, 2016 4 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "KVM-ARM fixes, mostly coming from the PMU work" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm64: KVM: Fix guest dead loop when register accessor returns false arm64: KVM: Fix comments of the CP handler arm64: KVM: Fix wrong use of the CPSR MODE mask for 32bit guests arm64: KVM: Obey RES0/1 reserved bits when setting CPTR_EL2 arm64: KVM: Fix AArch64 guest userspace exception injection
-
Linus Torvalds authored
Merge tag 'regmap-fix-v4.5-big-endian' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A single revert back to v4.4 endianness handling. Commit 29bb45f2 ("regmap-mmio: Use native endianness for read/write") attempted to fix some long standing bugs in the MMIO implementation for big endian systems caused by duplicate byte swapping in both regmap and readl()/writel(). Sadly the fix makes things worse rather than better, so revert it for now" * tag 'regmap-fix-v4.5-big-endian' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: mmio: Revert to v4.4 endianness handling
-
Masahiro Yamada authored
Fix the doubled "started" and tidy up the following sentences. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paolo Bonzini authored
Merge tag 'kvm-arm-for-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM fixes for v4.5-rc2 A few random fixes, mostly coming from the PMU work by Shannon: - fix for injecting faults coming from the guest's userspace - cleanup for our CPTR_EL2 accessors (reserved bits) - fix for a bug impacting perf (user/kernel discrimination) - fix for a 32bit sysreg handling bug
-
