Skip to content

L
linux
Switch branch/tag
  1. 04 Oct, 2024 9 commits
    • Luiz Augusto von Dentz's avatar
      Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync · 18fd04ad
      Luiz Augusto von Dentz authored 
      This checks if the ACL connection remains valid as it could be destroyed
while hci_enhanced_setup_sync is pending on cmd_sync leading to the
following trace:

BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60
Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37

CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
 <TASK>
 dump_stack_lvl+0x5d/0x80
 ? hci_enhanced_setup_sync+0x91b/0xa60
 print_report+0x152/0x4c0
 ? hci_enhanced_setup_sync+0x91b/0xa60
 ? __virt_addr_valid+0x1fa/0x420
 ? hci_enhanced_setup_sync+0x91b/0xa60
 kasan_report+0xda/0x1b0
 ? hci_enhanced_setup_sync+0x91b/0xa60
 hci_enhanced_setup_sync+0x91b/0xa60
 ? __pfx_hci_enhanced_setup_sync+0x10/0x10
 ? __pfx___mutex_lock+0x10/0x10
 hci_cmd_sync_work+0x1c2/0x330
 process_one_work+0x7d9/0x1360
 ? __pfx_lock_acquire+0x10/0x10
 ? __pfx_process_one_work+0x10/0x10
 ? assign_work+0x167/0x240
 worker_thread+0x5b7/0xf60
 ? __kthread_parkme+0xac/0x1c0
 ? __pfx_worker_thread+0x10/0x10
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x293/0x360
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2f/0x70
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1a/0x30
 </TASK>

Allocated by task 34:
 kasan_save_stack+0x30/0x50
 kasan_save_track+0x14/0x30
 __kasan_kmalloc+0x8f/0xa0
 __hci_conn_add+0x187/0x17d0
 hci_connect_sco+0x2e1/0xb90
 sco_sock_connect+0x2a2/0xb80
 __sys_connect+0x227/0x2a0
 __x64_sys_connect+0x6d/0xb0
 do_syscall_64+0x71/0x140
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Freed by task 37:
 kasan_save_stack+0x30/0x50
 kasan_save_track+0x14/0x30
 kasan_save_free_info+0x3b/0x60
 __kasan_slab_free+0x101/0x160
 kfree+0xd0/0x250
 device_release+0x9a/0x210
 kobject_put+0x151/0x280
 hci_conn_del+0x448/0xbf0
 hci_abort_conn_sync+0x46f/0x980
 hci_cmd_sync_work+0x1c2/0x330
 process_one_work+0x7d9/0x1360
 worker_thread+0x5b7/0xf60
 kthread+0x293/0x360
 ret_from_fork+0x2f/0x70
 ret_from_fork_asm+0x1a/0x30

Cc: stable@vger.kernel.org
Fixes: e07a06b4 ("Bluetooth: Convert SCO configure_datapath to hci_sync")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      18fd04ad
    • Luiz Augusto von Dentz's avatar
      Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change · 08d19142
      Luiz Augusto von Dentz authored 
      rfcomm_sk_state_change attempts to use sock_lock so it must never be
called with it locked but rfcomm_sock_ioctl always attempt to lock it
causing the following trace:

======================================================
WARNING: possible circular locking dependency detected
6.8.0-syzkaller-08951-gfe46a7dd #0 Not tainted
------------------------------------------------------
syz-executor386/5093 is trying to acquire lock:
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline]
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73

but task is already holding lock:
ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491

Reported-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com
Tested-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218
Fixes: 3241ad82 ("[Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCO")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      08d19142
    • Jakub Kicinski's avatar
      Merge branch 'ibmvnic-fix-for-send-scrq-direct' · 500257db
      Jakub Kicinski authored 
      Nick Child says:

====================
ibmvnic: Fix for send scrq direct

This is a v2 of a patchset (now just patch) which addresses a
bug in a new feature which is causing major link UP issues with
certain physical cards.

For a full summary of the issue:
  1. During vnic initialization we get the following values from vnic
     server regarding "Transmit / Receive Descriptor Requirement" (see
      PAPR Table 584. CAPABILITIES Commands):
    - LSO Tx frame = 0x0F , header offsets + L2, L3, L4 headers required
    - CSO Tx frame = 0x0C , header offsets + L2 header required
    - standard frame = 0x0C , header offsets + L2 header required
  2. Assume we are dealing with only "standard frames" from now on (no
     CSO, no LSO)
  3. When using 100G backing device, we don't hand vnic server any header
     information and TX is successful
  4. When using 25G backing device, we don't hand vnic server any header
    information and TX fails and we get "Adapter Error" transport events.
The obvious issue here is that vnic client should be respecting the 0X0C
header requirement for standard frames.  But 100G cards will also give
0x0C despite the fact that we know TX works if we ignore it. That being
said, we still must respect values given from the managing server. Will
need to work with them going forward to hopefully get 100G cards to
return 0x00 for this bitstring so the performance gains of using
send_subcrq_direct can be continued.
====================

Link: https://patch.msgid.link/20241001163200.1802522-1-nnac123@linux.ibm.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      500257db
    • Nick Child's avatar
      ibmvnic: Inspect header requirements before using scrq direct · de390657
      Nick Child authored 
      Previously, the TX header requirement for standard frames was ignored.
This requirement is a bitstring sent from the VIOS which maps to the
type of header information needed during TX. If no header information,
is needed then send subcrq direct can be used (which can be more
performant).

This bitstring was previously ignored for standard packets (AKA non LSO,
non CSO) due to the belief that the bitstring was over-cautionary. It
turns out that there are some configurations where the backing device
does need header information for transmission of standard packets. If
the information is not supplied then this causes continuous "Adapter
error" transport events. Therefore, this bitstring should be respected
and observed before considering the use of send subcrq direct.

Fixes: 74839f7a ("ibmvnic: Introduce send sub-crq direct")
Signed-off-by: default avatarNick Child <nnac123@linux.ibm.com>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001163200.1802522-2-nnac123@linux.ibm.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      de390657
    • Jakub Kicinski's avatar
      Merge branch 'netfilter-br_netfilter-fix-panic-with-metadata_dst-skb' · 69ea1d4a
      Jakub Kicinski authored 
      Andy Roulin says:

====================
netfilter: br_netfilter: fix panic with metadata_dst skb

There's a kernel panic possible in the br_netfilter module when sending
untagged traffic via a VxLAN device. Traceback is included below.
This happens during the check for fragmentation in br_nf_dev_queue_xmit
if the MTU on the VxLAN device is not big enough.

It is dependent on:
1) the br_netfilter module being loaded;
2) net.bridge.bridge-nf-call-iptables set to 1;
3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port;
4) untagged frames with size higher than the VxLAN MTU forwarded/flooded

This case was never supported in the first place, so the first patch drops
such packets.

A regression selftest is added as part of the second patch.

PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data.
[  176.291791] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000110
[  176.292101] Mem abort info:
[  176.292184]   ESR = 0x0000000096000004
[  176.292322]   EC = 0x25: DABT (current EL), IL = 32 bits
[  176.292530]   SET = 0, FnV = 0
[  176.292709]   EA = 0, S1PTW = 0
[  176.292862]   FSC = 0x04: level 0 translation fault
[  176.293013] Data abort info:
[  176.293104]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[  176.293488]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[  176.293787]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[  176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000
[  176.294166] [0000000000000110] pgd=0000000000000000,
p4d=0000000000000000
[  176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[  176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth
br_netfilter bridge stp llc ipv6 crct10dif_ce
[  176.295923] CPU: 0 PID: 188 Comm: ping Not tainted
6.8.0-rc3-g5b3fbd61 #2
[  176.296314] Hardware name: linux,dummy-virt (DT)
[  176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[  176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[  176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter]
[  176.297636] sp : ffff800080003630
[  176.297743] x29: ffff800080003630 x28: 0000000000000008 x27:
ffff6828c49ad9f8
[  176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24:
00000000000003e8
[  176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21:
ffff6828c3b16d28
[  176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18:
0000000000000014
[  176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15:
0000000095744632
[  176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12:
ffffb7e137926a70
[  176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 :
0000000000000000
[  176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 :
f20e0100bebafeca
[  176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 :
0000000000000000
[  176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 :
ffff6828c7f918f0
[  176.300889] Call trace:
[  176.301123]  br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[  176.301411]  br_nf_post_routing+0x2a8/0x3e4 [br_netfilter]
[  176.301703]  nf_hook_slow+0x48/0x124
[  176.302060]  br_forward_finish+0xc8/0xe8 [bridge]
[  176.302371]  br_nf_hook_thresh+0x124/0x134 [br_netfilter]
[  176.302605]  br_nf_forward_finish+0x118/0x22c [br_netfilter]
[  176.302824]  br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter]
[  176.303136]  br_nf_forward+0x2b8/0x4e0 [br_netfilter]
[  176.303359]  nf_hook_slow+0x48/0x124
[  176.303803]  __br_forward+0xc4/0x194 [bridge]
[  176.304013]  br_flood+0xd4/0x168 [bridge]
[  176.304300]  br_handle_frame_finish+0x1d4/0x5c4 [bridge]
[  176.304536]  br_nf_hook_thresh+0x124/0x134 [br_netfilter]
[  176.304978]  br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter]
[  176.305188]  br_nf_pre_routing+0x250/0x524 [br_netfilter]
[  176.305428]  br_handle_frame+0x244/0x3cc [bridge]
[  176.305695]  __netif_receive_skb_core.constprop.0+0x33c/0xecc
[  176.306080]  __netif_receive_skb_one_core+0x40/0x8c
[  176.306197]  __netif_receive_skb+0x18/0x64
[  176.306369]  process_backlog+0x80/0x124
[  176.306540]  __napi_poll+0x38/0x17c
[  176.306636]  net_rx_action+0x124/0x26c
[  176.306758]  __do_softirq+0x100/0x26c
[  176.307051]  ____do_softirq+0x10/0x1c
[  176.307162]  call_on_irq_stack+0x24/0x4c
[  176.307289]  do_softirq_own_stack+0x1c/0x2c
[  176.307396]  do_softirq+0x54/0x6c
[  176.307485]  __local_bh_enable_ip+0x8c/0x98
[  176.307637]  __dev_queue_xmit+0x22c/0xd28
[  176.307775]  neigh_resolve_output+0xf4/0x1a0
[  176.308018]  ip_finish_output2+0x1c8/0x628
[  176.308137]  ip_do_fragment+0x5b4/0x658
[  176.308279]  ip_fragment.constprop.0+0x48/0xec
[  176.308420]  __ip_finish_output+0xa4/0x254
[  176.308593]  ip_finish_output+0x34/0x130
[  176.308814]  ip_output+0x6c/0x108
[  176.308929]  ip_send_skb+0x50/0xf0
[  176.309095]  ip_push_pending_frames+0x30/0x54
[  176.309254]  raw_sendmsg+0x758/0xaec
[  176.309568]  inet_sendmsg+0x44/0x70
[  176.309667]  __sys_sendto+0x110/0x178
[  176.309758]  __arm64_sys_sendto+0x28/0x38
[  176.309918]  invoke_syscall+0x48/0x110
[  176.310211]  el0_svc_common.constprop.0+0x40/0xe0
[  176.310353]  do_el0_svc+0x1c/0x28
[  176.310434]  el0_svc+0x34/0xb4
[  176.310551]  el0t_64_sync_handler+0x120/0x12c
[  176.310690]  el0t_64_sync+0x190/0x194
[  176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860)
[  176.315743] ---[ end trace 0000000000000000 ]---
[  176.316060] Kernel panic - not syncing: Oops: Fatal exception in
interrupt
[  176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000
[  176.316564] PHYS_OFFSET: 0xffff97d780000000
[  176.316782] CPU features: 0x0,88000203,3c020000,0100421b
[  176.317210] Memory Limit: none
[  176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal
Exception in interrupt ]---\
====================

Link: https://patch.msgid.link/20241001154400.22787-1-aroulin@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      69ea1d4a
    • Andy Roulin's avatar
      selftests: add regression test for br_netfilter panic · bc4d22b7
      Andy Roulin authored 
      Add a new netfilter selftests to test against br_netfilter panics when
VxLAN single-device is used together with untagged traffic and high MTU.
Reviewed-by: default avatarPetr Machata <petrm@nvidia.com>
Signed-off-by: default avatarAndy Roulin <aroulin@nvidia.com>
Acked-by: default avatarNikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241001154400.22787-3-aroulin@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      bc4d22b7
    • Andy Roulin's avatar
      netfilter: br_netfilter: fix panic with metadata_dst skb · f9ff7665
      Andy Roulin authored 
      Fix a kernel panic in the br_netfilter module when sending untagged
traffic via a VxLAN device.
This happens during the check for fragmentation in br_nf_dev_queue_xmit.

It is dependent on:
1) the br_netfilter module being loaded;
2) net.bridge.bridge-nf-call-iptables set to 1;
3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port;
4) untagged frames with size higher than the VxLAN MTU forwarded/flooded

When forwarding the untagged packet to the VxLAN bridge port, before
the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and
changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type
of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL.

Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check
for frames that needs to be fragmented: frames with higher MTU than the
VxLAN device end up calling br_nf_ip_fragment, which in turns call
ip_skb_dst_mtu.

The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst
with valid dst->dev, thus the crash.

This case was never supported in the first place, so drop the packet
instead.

PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data.
[  176.291791] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000110
[  176.292101] Mem abort info:
[  176.292184]   ESR = 0x0000000096000004
[  176.292322]   EC = 0x25: DABT (current EL), IL = 32 bits
[  176.292530]   SET = 0, FnV = 0
[  176.292709]   EA = 0, S1PTW = 0
[  176.292862]   FSC = 0x04: level 0 translation fault
[  176.293013] Data abort info:
[  176.293104]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[  176.293488]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[  176.293787]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[  176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000
[  176.294166] [0000000000000110] pgd=0000000000000000,
p4d=0000000000000000
[  176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[  176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth
br_netfilter bridge stp llc ipv6 crct10dif_ce
[  176.295923] CPU: 0 PID: 188 Comm: ping Not tainted
6.8.0-rc3-g5b3fbd61 #2
[  176.296314] Hardware name: linux,dummy-virt (DT)
[  176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[  176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[  176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter]
[  176.297636] sp : ffff800080003630
[  176.297743] x29: ffff800080003630 x28: 0000000000000008 x27:
ffff6828c49ad9f8
[  176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24:
00000000000003e8
[  176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21:
ffff6828c3b16d28
[  176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18:
0000000000000014
[  176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15:
0000000095744632
[  176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12:
ffffb7e137926a70
[  176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 :
0000000000000000
[  176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 :
f20e0100bebafeca
[  176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 :
0000000000000000
[  176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 :
ffff6828c7f918f0
[  176.300889] Call trace:
[  176.301123]  br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[  176.301411]  br_nf_post_routing+0x2a8/0x3e4 [br_netfilter]
[  176.301703]  nf_hook_slow+0x48/0x124
[  176.302060]  br_forward_finish+0xc8/0xe8 [bridge]
[  176.302371]  br_nf_hook_thresh+0x124/0x134 [br_netfilter]
[  176.302605]  br_nf_forward_finish+0x118/0x22c [br_netfilter]
[  176.302824]  br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter]
[  176.303136]  br_nf_forward+0x2b8/0x4e0 [br_netfilter]
[  176.303359]  nf_hook_slow+0x48/0x124
[  176.303803]  __br_forward+0xc4/0x194 [bridge]
[  176.304013]  br_flood+0xd4/0x168 [bridge]
[  176.304300]  br_handle_frame_finish+0x1d4/0x5c4 [bridge]
[  176.304536]  br_nf_hook_thresh+0x124/0x134 [br_netfilter]
[  176.304978]  br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter]
[  176.305188]  br_nf_pre_routing+0x250/0x524 [br_netfilter]
[  176.305428]  br_handle_frame+0x244/0x3cc [bridge]
[  176.305695]  __netif_receive_skb_core.constprop.0+0x33c/0xecc
[  176.306080]  __netif_receive_skb_one_core+0x40/0x8c
[  176.306197]  __netif_receive_skb+0x18/0x64
[  176.306369]  process_backlog+0x80/0x124
[  176.306540]  __napi_poll+0x38/0x17c
[  176.306636]  net_rx_action+0x124/0x26c
[  176.306758]  __do_softirq+0x100/0x26c
[  176.307051]  ____do_softirq+0x10/0x1c
[  176.307162]  call_on_irq_stack+0x24/0x4c
[  176.307289]  do_softirq_own_stack+0x1c/0x2c
[  176.307396]  do_softirq+0x54/0x6c
[  176.307485]  __local_bh_enable_ip+0x8c/0x98
[  176.307637]  __dev_queue_xmit+0x22c/0xd28
[  176.307775]  neigh_resolve_output+0xf4/0x1a0
[  176.308018]  ip_finish_output2+0x1c8/0x628
[  176.308137]  ip_do_fragment+0x5b4/0x658
[  176.308279]  ip_fragment.constprop.0+0x48/0xec
[  176.308420]  __ip_finish_output+0xa4/0x254
[  176.308593]  ip_finish_output+0x34/0x130
[  176.308814]  ip_output+0x6c/0x108
[  176.308929]  ip_send_skb+0x50/0xf0
[  176.309095]  ip_push_pending_frames+0x30/0x54
[  176.309254]  raw_sendmsg+0x758/0xaec
[  176.309568]  inet_sendmsg+0x44/0x70
[  176.309667]  __sys_sendto+0x110/0x178
[  176.309758]  __arm64_sys_sendto+0x28/0x38
[  176.309918]  invoke_syscall+0x48/0x110
[  176.310211]  el0_svc_common.constprop.0+0x40/0xe0
[  176.310353]  do_el0_svc+0x1c/0x28
[  176.310434]  el0_svc+0x34/0xb4
[  176.310551]  el0t_64_sync_handler+0x120/0x12c
[  176.310690]  el0t_64_sync+0x190/0x194
[  176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860)
[  176.315743] ---[ end trace 0000000000000000 ]---
[  176.316060] Kernel panic - not syncing: Oops: Fatal exception in
interrupt
[  176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000
[  176.316564] PHYS_OFFSET: 0xffff97d780000000
[  176.316782] CPU features: 0x0,88000203,3c020000,0100421b
[  176.317210] Memory Limit: none
[  176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal
Exception in interrupt ]---\

Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Reviewed-by: default avatarIdo Schimmel <idosch@nvidia.com>
Signed-off-by: default avatarAndy Roulin <aroulin@nvidia.com>
Acked-by: default avatarNikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241001154400.22787-2-aroulin@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      f9ff7665
    • Vladimir Oltean's avatar
      net: dsa: sja1105: fix reception from VLAN-unaware bridges · 1f9fc48f
      Vladimir Oltean authored 
      The blamed commit introduced an unexpected regression in the sja1105
driver. Packets from VLAN-unaware bridge ports get received correctly,
but the protocol stack can't seem to decode them properly.

For ds->untag_bridge_pvid users (thus also sja1105), the blamed commit
did introduce a functional change: dsa_switch_rcv() used to call
dsa_untag_bridge_pvid(), which looked like this:

	err = br_vlan_get_proto(br, &proto);
	if (err)
		return skb;

	/* Move VLAN tag from data to hwaccel */
	if (!skb_vlan_tag_present(skb) && skb->protocol == htons(proto)) {
		skb = skb_vlan_untag(skb);
		if (!skb)
			return NULL;
	}

and now it calls dsa_software_vlan_untag() which has just this:

	/* Move VLAN tag from data to hwaccel */
	if (!skb_vlan_tag_present(skb)) {
		skb = skb_vlan_untag(skb);
		if (!skb)
			return NULL;
	}

thus lacks any skb->protocol == bridge VLAN protocol check. That check
is deferred until a later check for skb->vlan_proto (in the hwaccel area).

The new code is problematic because, for VLAN-untagged packets,
skb_vlan_untag() blindly takes the 4 bytes starting with the EtherType
and turns them into a hwaccel VLAN tag. This is what breaks the protocol
stack.

It would be tempting to "make it work as before" and only call
skb_vlan_untag() for those packets with the skb->protocol actually
representing a VLAN.

But the premise of the newly introduced dsa_software_vlan_untag() core
function is not wrong. Drivers set ds->untag_bridge_pvid or
ds->untag_vlan_aware_bridge_pvid presumably because they send all
traffic to the CPU reception path as VLAN-tagged. So why should we spend
any additional CPU cycles assuming that the packet may be VLAN-untagged?
And why does the sja1105 driver opt into ds->untag_bridge_pvid if it
doesn't always deliver packets to the CPU as VLAN-tagged?

The answer to the latter question is indeed more interesting: it doesn't
need to. This got done in commit 884be12f ("net: dsa: sja1105: add
support for imprecise RX"), because I thought it would be needed, but I
didn't realize that it doesn't actually make a difference.

As explained in the commit message of the blamed patch, ds->untag_bridge_pvid
only makes a difference in the VLAN-untagged receive path of a bridge port.
However, in that operating mode, tag_sja1105.c makes use of VLAN tags
with the ETH_P_SJA1105 TPID, and it decodes and consumes these VLAN tags
as if they were DSA tags (aka tag_8021q operation). Even if commit
884be12f ("net: dsa: sja1105: add support for imprecise RX") added
this logic in sja1105_bridge_vlan_add():

	/* Always install bridge VLANs as egress-tagged on the CPU port. */
	if (dsa_is_cpu_port(ds, port))
		flags = 0;

that was for _bridge_ VLANs, which are _not_ committed to hardware
in VLAN-unaware mode (aka the mode where ds->untag_bridge_pvid does
anything at all). Even prior to that change, the tag_8021q VLANs
were always installed as egress-tagged on the CPU port, see
dsa_switch_tag_8021q_vlan_add():

	u16 flags = 0; // egress-tagged, non-PVID

	if (dsa_port_is_user(dp))
		flags |= BRIDGE_VLAN_INFO_UNTAGGED |
			 BRIDGE_VLAN_INFO_PVID;

	err = dsa_port_do_tag_8021q_vlan_add(dp, info->vid,
					     flags);
	if (err)
		return err;

Whether the sja1105 driver needs the new flag, ds->untag_vlan_aware_bridge_pvid,
rather than ds->untag_bridge_pvid, is a separate discussion. To fix the
current bug in VLAN-unaware bridge mode, I would argue that the sja1105
driver should not request something it doesn't need, rather than
complicating the core DSA helper. Whereas before the blamed commit, this
setting was harmless, now it has caused breakage.

Fixes: 93e4649e ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241001140206.50933-1-vladimir.oltean@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1f9fc48f
    • Jakub Kicinski's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · 096c0fa4
      Jakub Kicinski authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-09-30 (ice, idpf)

This series contains updates to ice and idpf drivers:

For ice:

Michal corrects setting of dst VSI on LAN filters and adds clearing of
port VLAN configuration during reset.

Gui-Dong Han corrects failures to decrement refcount in some error
paths.

Przemek resolves a memory leak in ice_init_tx_topology().

Arkadiusz prevents setting of DPLL_PIN_STATE_SELECTABLE to an improper
value.

Dave stops clearing of VLAN tracking bit to allow for VLANs to be properly
restored after reset.

For idpf:

Ahmed sets uninitialized dyn_ctl_intrvl_s value.

Josh corrects use and reporting of mailbox size.

Larysa corrects order of function calls during de-initialization.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  idpf: deinit virtchnl transaction manager after vport and vectors
  idpf: use actual mbx receive payload length
  idpf: fix VF dynamic interrupt ctl register initialization
  ice: fix VLAN replay after reset
  ice: disallow DPLL_PIN_STATE_SELECTABLE for dpll output pins
  ice: fix memleak in ice_init_tx_topology()
  ice: clear port vlan config during reset
  ice: Fix improper handling of refcount in ice_sriov_set_msix_vec_count()
  ice: Fix improper handling of refcount in ice_dpll_init_rclk_pins()
  ice: set correct dst VSI in only LAN filters
====================

Link: https://patch.msgid.link/20240930223601.3137464-1-anthony.l.nguyen@intel.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      096c0fa4
  3. 03 Oct, 2024 31 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7