- 05 Jul, 2013 3 commits
-
-
Daniel Vetter authored
A magic -1 is a obscure, especially since it's actually passed as an unsigned, so depends upon the magic sign extension rules in C. This has been added in commit 3727d55e Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Wed May 8 10:45:14 2013 -0700 drm/i915: allow stolen, pre-allocated objects to avoid GTT allocation v2 Use a proper #define instead. Spotted while reviewing Ben's drm_mm_create_block changes. v2: Cast the constant to u32 since otherwise we again have a type mismatch. Suggested by Chris Wilson. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
We only do this on IBX where there's a fixed pch dpll to pipe assignment. Being explicit about it can't really hurt and makes sparse happy. Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Daniel Vetter authored
This makes sparse happy and also makes it a bit more obvious where we pull off this trick - after all we're only allowed to do it eithe as a default or on platforms where there is no disdinction between the pipe and the cpu transcoder. Reviewed-by:
-
- 02 Jul, 2013 2 commits
-
-
Ville Syrjälä authored
Use wait_for() instead of the open coded loop to avoid spreading the same old timeout related bugs. This changes the loop to use msleep(1) instead of udelay(10) when the Punit had not yet completed the frequency change. In practice that doesn't seem to hurt performance as the Punit appears to be ready pretty much always. Also give the status bit a name, instead of using the magic number 1. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Jesse Barnes authored
This should help on HSW, where we don't currently have a get_clock call. Reported-by:
Paulo Zanoni <przanoni@gmail.com> Signed-off-by:
-
- 01 Jul, 2013 35 commits
-
-
Jesse Barnes authored
Print out the flag that failed and fix up a mismatched paren. Signed-off-by:
-
Mika Kuoppala authored
As getting error state doesn't anymore require big kmallocs, make error state accessible also from sysfs. v2: - error state clearing (Chris Wilson) - user hint, proper access mode bits and name (Daniel Vetter) v3: release resources in proper order (Chris Wilson) Suggested-by:Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Mika Kuoppala authored
Make function for struct i915_error_state_buf initialization and export it, for sysfs and debugfs. Signed-off-by:
-
Mika Kuoppala authored
In preparation for sysfs error state access, export ref error state ref counting interface. Signed-off-by:
-
Mika Kuoppala authored
In preparation for accessing error state from sysfs, export error state to string conversion function. Also tuck buffer error handling inside the function. Signed-off-by:
-
Jesse Barnes authored
If the crtc is active, we can simply flip a new fb onto it, provided the other mode setting reqs are met. Otherwise, we'll need to do a full mode set to re-enable the crtc. v2: check for crtc active and set mode_changed accordingly v3: add module parameter, i915.fastboot, to control no fb -> fb flip behavior Signed-off-by:
-
Jesse Barnes authored
Need better pfit tracking to do this right. v2: use fastboot param around this hack Signed-off-by:
-
Jesse Barnes authored
We already fetch and track other state into the main CRTC and encoder structs, and for fastboot we need to do the same with the mode and clock data we read out. v2: fix debug print v3: use fastboot param around state copy v4: set clock and flags for crtc here instead of in setup_hw_state v5: rename function to intel_crtc_mode_from_pipe_config for consistency (Chris) Signed-off-by:
-
Jesse Barnes authored
We need this for comparing modes between configuration changes. The tricky part is to allow us to reuse the new get_clock stuff to recover the lvds clock on gen2/3 when neither the vbt has an lvds mode nor the panel a (useful) EDID. v2: try harder to calulate non-simple pixel clocks (Daniel) call get_clock after getting the encoder config, needed for pixel multiply (Jesse) v3: drop get_clock now that the pixel_multiply has been moved into get_pipe_config v4: re-add get_clock; we need to get the pixel multiplier in the encoder, so need to calculate the clock value after the encoder's get_config is called v5: drop hsw clock_get, still needs to be written v6: add fuzzy clock check (Daniel) v7: wrap fuzzy clock check under !IS_HASWELL use port_clock field rather than a new CPU eDP clock field in crtc_config v8: remove stale pixel_multiplier sets (Daniel) multiply by pixel_multiplier in 9xx clock get too (Daniel) v9: make sure we set pixel_multiplier before calling clock_get from mode_get for LVDS (Daniel) Signed-off-by: -
Jesse Barnes authored
Handling all the state properly for fastboot is still not yet done by far, but we need some way to be able to test what we currently have. So hide the not-yet-quite-complete stuff behind a module option. Signed-off-by:
-
Daniel Vetter authored
Now that we painstakingly track the shared pch dplls we can finally implement pixel mutliplier readout support for pch ports, too. v2: Undo the temporary hack to disable the sdvo pixel multiplier cross-checking. Cc: Imre Deak <imre.deak@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
-
Ben Widawsky authored
for file in `ls drivers/gpu/drm/i915/*.c` ; do sed -i "s/mm.gtt_mtrr/gtt.mtrr/" $file; done Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Ben Widawsky authored
Signed-off-by:
-
Ben Widawsky authored
Just for compactness. Signed-off-by:
-
Ben Widawsky authored
The original pte_encode function needed the dev argument so we could do platform specific handling via IS_GENX, etc. With the merging of a pte encoding function there should never been a need to quirk away gen specific details. The patch doesn't do much but makes the upcoming reworks in gtt/ppgtt/mm slightly (albeit, ever so) easier. Reviewed-by:
Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
-
Ben Widawsky authored
There isn't any special reason to do this other than it makes it obvious that the two members are connected. Signed-off-by:
-
Ben Widawsky authored
A previous patch had set up the ppgtt and ggtt to use the same scratch page, but still kept around both pointers. Kill it, it's not needed and gets in our way for upcoming cleanups. Signed-off-by:
-
Ben Widawsky authored
Nothing outside of i915_gem_gtt.c and more specifically, the relevant gen specific init function should need to know about number of PDEs, or PTEs per PD. Exposing this will only lead to circumventing using the upcoming VM abstraction. To accomplish this, move the defines into the .c file, rename the PDE define to be GEN6, and make the PTE count less of a magic number. The remaining code in the global gtt setup is a bit messy, but an upcoming patch will clean that one up. v2: Don't hardcode number of PDEs (Daniel + Jesse) Reworded commit message to reflect change. Reviewed-by:
-
Ben Widawsky authored
This helps when we have per VM buffer capturing. Signed-off-by:
-
Ben Widawsky authored
Not only was there an extra, but since we now kzalloc the error state, we don't need either. Signed-off-by:
-
Ville Syrjälä authored
The DPLL lock bit, and the DPIO phy status bits are read-only and controlled by the hardware, so they will never be set by the driver. Mask them out when reading the hw state, so that the state comparison won't fail. Signed-off-by:
Jesse Barnes <jbarnes@virtuosugeek.org> [danvet: Jesse asked for a code comment and I wholeheartly agree, so added one.] Signed-off-by:
-
Daniel Vetter authored
i9xx doesn't use pre_enable at all, so we can fold this in now. Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Daniel Vetter authored
Now that we have the proper pipe config to track this, we don't need to write any registers any more. Note that for platforms without DPLL_MD (pre-gen4) which store the pixel mutliplier in the DPLL register I've decided to keep the seemingly "redundant" write: The comment right below saying "do this trice for luck" doesn't instill confidence ... v2: Drop a few now unnecessary local variables and switch the enable function to take a struct intel_crtc * to simply arguments. v3: Rebase on top of the newly-colored BUG_ON. v4: Amend commit message to alliviate Imre's comment about the redudant DPLL write for the pixel mutliplier. Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
In addition to existing stuff we also need to track DPLL_MD on gen4 and vlv. This is prep work so that we can move the dpll enable sequence out from the ->mode_set callback into the crtc enabling functions. Reviewed-by:
-
Daniel Vetter authored
The ->pre_enable hook is only used for the cpu edp port on ilk-ivb, so we can safely move it up across the fdi pll enabling. Unfortunately we can't (yet) merge in the pre_pll enable hook despite that only lvds uses it on ilk-ivb: Since the same lvds hook is also need on i9xx platforms we need to fix up the pll enabling sequence there, too. Reviewed-by:
-
Daniel Vetter authored
Lots of bangin my head against the wall^UExperiments have shown that we really need to enable the lvds port before we enable plls. Strangely that seems to include the fdi rx pll on the pch. Note that the pch pll assert can fire since the lvds port has it's own special clock source settings in the DPLL register, which means it will never have a shared dpll (since there's only one LVDS port). Anyway, encode this new evidence with a few nice WARNs. v2: Incorporate review comments from Imre. - Explain why lvds can't have a shared dpll. - Update the WARN output. Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Daniel Vetter authored
Mostly since I _really_ don't want to touch the vlv hell. No code change, just duplication. Also kill a now seriously outdated code comment - the remark about the dvo encoder is now handled with the pipe A quirk. v2: Update the BUG_ONs as suggested by Jani (both in vlv_ and i9xx_ functions, since the split happens here). Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
Just yet another prep step to be able to do all this up-front, before we've set up any of the shared dplls in the new state. This will eventually be useful for atomic modesetting. Reviewed-by:
-
Daniel Vetter authored
It's been splattered over 3 different places all doing random things. Now we have (mostly) the same sequence as i8xx/i9xx, but all called from the crtc_enable hook (through the pll->enable function): - write new dividers - enable vco and wait for stable clocks - write again for the pixel mutliplier I've left the seemingly random 200 usec delay in there, just in case. Also move the encoder->pre_pll_enable hook into the crtc_enable function, at the same spot we currently have a hack to enable the lvds port. Since that hack is now redundant, kill it. While doing this patch I've learned the hard way that we can only fire up the LVDS port if both the pch dpll _and_ the fdi rc pll are not yet enabled. Otherwise things go haywire, at least on cpt. v2: It is paramount to write the FPx divisors before we enable the the vco by writing to the DPLL registers, for otherwise the divisors won't get updated. This is in line with the i8xx/i9xx dpll. v3: To keep the nice abstraction add a ->mode_set callback to set the divisors. Also streamline the enabling/disabling code a bit by removing some cargo-cult duplication and clearing registers where possible in the ->disable hook. v4: Remove now unused local variable. Acked-by:
-
Damien Lespiau authored
Once we've found the the context object programmed in CCID, there's no need to look the other objects in the list. Signed-off-by:
-
Damien Lespiau authored
A genuine 'static' omission and 2 other warnings triggered by not including the header where those functions where defined. Signed-off-by:
-
Damien Lespiau authored
Missing spaces and misplaced '*'. Signed-off-by:
-
Damien Lespiau authored
Caught with checkpatch.pl. Suggested-by:
-
Damien Lespiau authored
When running on my snb machine, recent kernels display successively: [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param But no module param is set. This happens because the check for the module parameter uses a variable that has been overridden inside the "per-chip default" code. Fix up the logic and add another reason for the FBC to the be disabled. Signed-off-by:
-
Damien Lespiau authored
This function has no user outside of intel_pm.c. Signed-off-by:
-
