The description says:

 Cause IO segments sent to a device for DMA to be merged virtually
 by the IOMMU when they happen to have been allocated contiguously.
 This doesn't add pressure to the IOMMU allocator. However, some
 drivers don't support getting large merged segments coming back
 from *_map_sg().

 Most drivers don't have this problem; it is safe to say Y here.

It's out of date. Long ago, drivers didn't have a way to tell IOMMUs
about their segment length limit (that is, the maximum segment length
that they can handle). So IOMMUs merged as many segments as possible
and gave too large segments to drivers.

dma_get_max_seg_size() was introduced to solve the above
problem. Device drives can use the API to tell IOMMU about the maximum
segment length that they can handle. In addition, the default limit
(64K) should be safe for everyone.

So this config option seems to be unnecessary.

Note that this config option just enables users to disable the virtual
merging by default. Users can still disable the virtual merging by the
boot parameter.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc initializes swiotlb before parsing the kernel boot options so
swiotlb options (e.g. specifying the swiotlb buffer size) are ignored.

Any time before freeing bootmem works for swiotlb so this patch moves
powerpc's swiotlb initialization after parsing the kernel boot
options, mem_init (as x86 does).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Becky Bruce <beckyb@kernel.crashing.org>
Tested-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

When printk() is disabled (CONFIG_PRINTK) at menu item
 General setup
 -> Configure standard kernel features (for small systems)
    -> Enable support for printk
then there should be no printk() calls at all.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The powerpc implementations of syscall_get_error and
syscall_set_return_value should use CCR0:S0 (0x10000000) for testing
and setting syscall error status.  Fortunately these APIs don't seem
to be used at the moment.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We shouldn't be always setting 'M' in the TLB entry since its reasonable
for somethings to be mapped non-coherent.  The PTE should have 'M' set
properly.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

e500v1/v2 based chips will treat any reserved field being set in an
opcode as illegal.  Thus always setting the hint in the opcode is
a bad idea.

Anton should be kept away from the powerpc opcode map.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/mce: Fix build bug with CONFIG_PROVE_LOCKING=y && CONFIG_X86_MCE_INTEL=y

drivers/i2c/busses/i2c-xiic.c:493: error: implicit declaration of function 'mdelay'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "Richard Röjfors" <richard.rojfors@pelagicore.com>
Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This file was missed in the original patch that went into Linus' tree.

Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add ALDI/MEDION netbook E1222 to qurik reset table
  Input: ALPS - fix stuck buttons on some touchpads
  Input: wm831x-on - convert to use genirq
  Input: ads7846 - add wakeup support
  Input: appletouch - fix integer overflow issue
  Input: ad7877 - increase pen up imeout
  Input: ads7846 - add support for AD7843 parts
  Input: bf54x-keys - fix system hang when pressing a key
  Input: alps - add support for the touchpad on Toshiba Tecra A11-11L
  Input: remove BKL, fix input_open_file() locking
  Input: serio_raw - remove BKL
  Input: mousedev - remove BKL
  Input: add driver for TWL4030 vibrator device
  Input: enable remote wakeup for PNP i8042 keyboard ports
  Input: scancode in get/set_keycodes should be unsigned
  Input: i8042 - use platfrom_create_bundle() helper
  Input: wacom - merge out and in prox events
  Input: gamecon - fix off by one range check
  Input: wacom - replace WACOM_PKGLEN_PENABLED

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: remove whitespaces before quoted newlines
  nilfs2: remove spaces before tabs
  nilfs2: fix various typos in comments
  nilfs2: fix typo "cout" -> "count" in error message
  nilfs2: fix function name typos in docbook comments
  nilfs2: fix discrepancy in use of static specifier

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-algo-bit: Add pre- and post-xfer hooks
  at24: Init dynamic bin_attribute structures
  i2c: Drop configure option I2C_DEBUG_CHIP
  tsl2550: Move from i2c/chips to misc
  i2c-i801: Don't use the block buffer for I2C block writes
  i2c-powermac: Be less verbose in the absence of real errors.
  i2c-smbus: Use device_lock/device_unlock

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: Skip check for mandatory locks when unlocking
  9p: Fixes a simple bug enabling writes beyond 2GB.
  9p: Change the name of new protocol from 9p2010.L to 9p2000.L
  fs/9p: re-init the wstat in readdir loop
  net/9p: Add sysfs mount_tag file for virtio 9P device
  net/9p: Use the tag name in the config space for identifying mount point

Commit f56e8a07 "x86/mce: Fix RCU lockdep splats" introduced the
following build bug:

  arch/x86/kernel/cpu/mcheck/mce.c: In function 'mce_log':
  arch/x86/kernel/cpu/mcheck/mce.c:166: error: 'mce_read_mutex' undeclared (first use in this function)
  arch/x86/kernel/cpu/mcheck/mce.c:166: error: (Each undeclared identifier is reported only once
  arch/x86/kernel/cpu/mcheck/mce.c:166: error: for each function it appears in.)

Move the in-the-middle-of-file lock variable up to the variable
definition section, the top of the .c file.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267830207-9474-3-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

ALDI/MEDION netbook E1222 needs to be in the reset quirk list for
its touchpad's proper function.
Reported-by: Michael Fischer <mifi@gmx.de>
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Enable button release event redirection to the device that got the
button press not only for touchpads with interleaved protocols, but
unconditionally for all Alps touchpads. This is required at least
for the touchpads in Dell Inspiron 8200 and Latitude d630.
Signed-off-by: Martin Buck <mb-tmp-yvahk-vachg@gromit.dyndns.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Add very basic XVR-1000 framebuffer driver.
  qlogicpti: Remove slash in QlogicPTI irq name

This kills the following checkpatch warnings:

 WARNING: unnecessary whitespace before a quoted newline
 #869: FILE: super.c:869:
 +     	           "remount to a different snapshot. \n",

 WARNING: unnecessary whitespace before a quoted newline
 #389: FILE: the_nilfs.c:389:
 +     	    printk(KERN_ERR "NILFS: too short segment. \n");
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This kills the following checkpatch warnings:

 WARNING: please, no space before tabs
 #74: FILE: segment.h:74:
 +^Iunsigned ^I^Iflags;$

 WARNING: please, no space before tabs
 #35: FILE: segbuf.c:35:
 +^Iint ^I^I^Istart, end; /* The region to be submitted */$
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This fixes various typos I found in comments of nilfs2.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Fixes the following typos in docbook comments:

 nilfs_detroy_transaction_cache -> nilfs_destroy_transaction_cache
 nilfs_secgtor_start_timer -> nilfs_segctor_start_timer
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Two segbuf functions, nilfs_segbuf_write and nilfs_segbuf_wait, are
declared with the static storage class specifier, but their
implementations are not.

This fixes the discrepancy.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Frans van Berckel <fberckel@xs4all.nl>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits)
  bridge: ensure to unlock in error path in br_multicast_query().
  drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages
  sky2: Avoid rtnl_unlock without rtnl_lock
  ipv6: Send netlink notification when DAD fails
  drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant
  ipconfig: Handle devices which take some time to come up.
  mac80211: Fix memory leak in ieee80211_if_write()
  mac80211: Fix (dynamic) power save entry
  ipw2200: use kmalloc for large local variables
  ath5k: read eeprom IQ calibration values correctly for G mode
  ath5k: fix I/Q calibration (for real)
  ath5k: fix TSF reset
  ath5k: use fixed antenna for tx descriptors
  libipw: split ieee->networks into small pieces
  mac80211: Fix sta_mtx unlocking on insert STA failure path
  rt2x00: remove KSEG1ADDR define from rt2x00soc.h
  net: add ColdFire support to the smc91x driver
  asix: fix setting mac address for AX88772
  ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}.
  net: Fix dev_mc_add()
  ...

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix pick_next_highest_task_rt() for cgroups
  sched: Cleanup: remove unused variable in try_to_wake_up()
  x86: Fix sched_clock_cpu for systems with unsynchronized TSC

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD systems
  x86, UV: Fix target_cpus() in x2apic_uv_x.c
  x86: Reduce per cpu warning boot up messages
  x86: Reduce per cpu MCA boot up messages
  x86_64, cpa: Don't work hard in preserving kernel 2M mappings when using 4K already

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking: Make sparse work with inline spinlocks and rwlocks
  x86/mce: Fix RCU lockdep splats
  rcu: Increase RCU CPU stall timeouts if PROVE_RCU
  ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
  rcu: Suppress RCU lockdep warnings during early boot
  rcu, ftrace: Fix RCU lockdep splat in ftrace_perf_buf_prepare()
  rcu: Suppress __mpol_dup() false positive from RCU lockdep
  rcu: Make rcu_read_lock_sched_held() handle !PREEMPT
  rcu: Add control variables to lockdep_rcu_dereference() diagnostics
  rcu, cgroup: Relax the check in task_subsys_state() as early boot is now handled by lockdep-RCU
  rcu: Use wrapper function instead of exporting tasklist_lock
  sched, rcu: Fix rcu_dereference() for RCU-lockdep
  rcu: Make task_subsys_state() RCU-lockdep checks handle boot-time use
  rcu: Fix holdoff for accelerated GPs for last non-dynticked CPU
  x86/gart: Unexport gart_iommu_aperture

Fix trivial conflicts in kernel/trace/ftrace.c

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Do not record user stack trace from NMI context
  tracing: Disable buffer switching when starting or stopping trace
  tracing: Use same local variable when resetting the ring buffer
  function-graph: Init curr_ret_stack with ret_stack
  ring-buffer: Move disabled check into preempt disable section
  function-graph: Add tracing_thresh support to function_graph tracer
  tracing: Update the comm field in the right variable in update_max_tr
  function-graph: Use comment notation for func names of dangling '}'
  function-graph: Fix unused reference to ftrace_set_func()
  tracing: Fix warning in s_next of trace file ops
  tracing: Include irqflags headers from trace clock

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Sound MSI fallout on a Asus mobo NVIDIA MCP55
  sound: fix opti92x-ad1848 build
  ALSA: hda - Fix input source elements of secondary ADCs on Realtek
  ALSA: hda - Fix wrong model range check for ALC268

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Provide generic perf_sample_data initialization
  MAINTAINERS: Add Arnaldo as tools/perf/ co-maintainer
  perf trace: Don't use pager if scripting
  perf trace/scripting: Remove extraneous header read
  perf, ARM: Modify kuser rmb() call to compile for Thumb-2
  x86/stacktrace: Don't dereference bad frame pointers
  perf archive: Don't try to collect files without a build-id
  perf_events, x86: Fixup fixed counter constraints
  perf, x86: Restrict the ANY flag
  perf, x86: rename macro in ARCH_PERFMON_EVENTSEL_ENABLE
  perf, x86: add some IBS macros to perf_event.h
  perf, x86: make IBS macros available in perf_event.h
  hw-breakpoints: Remove stub unthrottle callback
  x86/hw-breakpoints: Remove the name field
  perf: Remove pointless breakpoint union
  perf lock: Drop the buffers multiplexing dependency
  perf lock: Fix and add misc documentally things
  percpu: Add __percpu sparse annotations to hw_breakpoint

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Skip check for mandatory locks when unlocking
  GFS2: Allow the number of committed revokes to temporarily be negative
  GFS2: do not select QUOTA

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix CX4 link problem in back-to-back configuration
  RDMA/nes: Clear stall bit before destroying NIC QP
  RDMA/nes: Set assume_aligned_header bit
  RDMA/cxgb3: Wait at least one schedule cycle during device removal
  IB/mad: Ignore iWARP devices on device removal
  IPoIB: Include return code in trace message for ib_post_send() failures
  IPoIB: Fix TX queue lockup with mixed UD/CM traffic

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote:
> From: Mikael Pettersson <mikpe@it.uu.se>
> Date: Wed, 10 Mar 2010 16:33:28 +0100
> > Booting 2.6.34-rc1 on a machine with a tulip nic I see
> > a number of kernel messages that include "(null)" where
> > previous kernels included the string "tulip0":
> CC:'ing the guilty party :-)  It's one of the following
> commits:

Thanks Mikael.

Anonymity has some good attributes.
Blame avoidance is one of them.

I've broad shoulders.  It's me, then Dwight Howard...

There might be another few of these where ->name or ->dev
was used before struct device or net_device was registered.
I'll go back and check.

tulip_core has:

	if (tp->flags & HAS_MEDIA_TABLE) {
		sprintf(dev->name, DRV_NAME "%d", board_idx);	/* hack */
		tulip_parse_eeprom(dev);
		strcpy(dev->name, "eth%d");			/* un-hack */
	}

So I don't feel _too_ bad.

tulip_parse_eeprom is done before register_netdev so the logging
there can not use netdev_<level> or dev_<level>(&dev->dev
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure we always call rtnl_lock before going down the
error path in sky2_resume, which unlocks the rtnl lock.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we are managing IPv6 addresses using DHCP, it would be nice
for user-space to be notified if an address configured through
DHCP fails DAD.  Otherwise user-space would have to poll to see
whether DAD succeeds.

This patch uses the existing notification mechanism and simply
hooks it into the DAD failure code path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The constant TG3_FLAG_10_100_ONLY should be used with the tg3_flags field,
not the tg3_flags2 field, as done elsewhere in the same file.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>