- 01 Jan, 2019 1 commit
-
-
Theodore Ts'o authored
The check for special (reserved) inode number checks in __ext4_iget() was broken by commit 8a363970: ("ext4: avoid declaring fs inconsistent due to invalid file handles"). This was caused by a botched reversal of the sense of the flag now known as EXT4_IGET_SPECIAL (when it was previously named EXT4_IGET_NORMAL). Fix the logic appropriately. Fixes: 8a363970 ("ext4: avoid declaring fs inconsistent...") Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org
-
- 31 Dec, 2018 3 commits
-
-
Theodore Ts'o authored
We already using mapping_set_error() in fs/ext4/page_io.c, so all we need to do is to use file_check_and_advance_wb_err() when handling fsync() requests in ext4_sync_file(). Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
Theodore Ts'o authored
In no-journal mode, we previously used __generic_file_fsync() in no-journal mode. This triggers a lockdep warning, and in addition, it's not safe to depend on the inode writeback mechanism in the case ext4. We can solve both problems by calling ext4_write_inode() directly. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
Theodore Ts'o authored
The xfstests generic/475 test switches the underlying device with dm-error while running a stress test. This results in a large number of file system errors, and since we can't lock the buffer head when marking the superblock dirty in the ext4_grp_locked_error() case, it's possible the superblock to be !buffer_uptodate() without buffer_write_io_error() being true. We need to set buffer_uptodate() before we call mark_buffer_dirty() or this will trigger a WARN_ON. It's safe to do this since the superblock must have been properly read into memory or the mount would have been successful. So if buffer_uptodate() is not set, we can safely assume that this happened due to a failed attempt to write the superblock. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 25 Dec, 2018 2 commits
-
-
Theodore Ts'o authored
The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent() while still holding the xattr semaphore. This is not necessary and it triggers a circular lockdep warning. This is because fiemap_fill_next_extent() could trigger a page fault when it writes into page which triggers a page fault. If that page is mmaped from the inline file in question, this could very well result in a deadlock. This problem can be reproduced using generic/519 with a file system configuration which has the inline_data feature enabled. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
Theodore Ts'o authored
There are enough credits reserved for most dioread_nolock writes; however, if the extent tree is sufficiently deep, and/or quota is enabled, the code was not allowing for all eventualities when reserving journal credits for the unwritten extent conversion. This problem can be seen using xfstests ext4/034: WARNING: CPU: 1 PID: 257 at fs/ext4/ext4_jbd2.c:271 __ext4_handle_dirty_metadata+0x10c/0x180 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work RIP: 0010:__ext4_handle_dirty_metadata+0x10c/0x180 ... EXT4-fs: ext4_free_blocks:4938: aborting transaction: error 28 in __ext4_handle_dirty_metadata EXT4: jbd2_journal_dirty_metadata failed: handle type 11 started at line 4921, credits 4/0, errcode -28 EXT4-fs error (device dm-1) in ext4_free_blocks:4950: error 28 Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
- 19 Dec, 2018 4 commits
-
-
Theodore Ts'o authored
If the file system has been shut down or is read-only, then ext4_write_inode() needs to bail out early. Also use jbd2_complete_transaction() instead of ext4_force_commit() so we only force a commit if it is needed. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
Theodore Ts'o authored
Some time back, nfsd switched from calling vfs_fsync() to using a new commit_metadata() hook in export_operations(). If the file system did not provide a commit_metadata() hook, it fell back to using sync_inode_metadata(). Unfortunately doesn't work on all file systems. In particular, it doesn't work on ext4 due to how the inode gets journalled --- the VFS writeback code will not always call ext4_write_inode(). So we need to provide our own ext4_nfs_commit_metdata() method which calls ext4_write_inode() directly. Google-Bug-Id: 121195940 Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
Theodore Ts'o authored
If we receive a file handle, either from NFS or open_by_handle_at(2), and it points at an inode which has not been initialized, and the file system has metadata checksums enabled, we shouldn't try to get the inode, discover the checksum is invalid, and then declare the file system as being inconsistent. This can be reproduced by creating a test file system via "mke2fs -t ext4 -O metadata_csum /tmp/foo.img 8M", mounting it, cd'ing into that directory, and then running the following program. #define _GNU_SOURCE #include <fcntl.h> struct handle { struct file_handle fh; unsigned char fid[MAX_HANDLE_SZ]; }; int main(int argc, char **argv) { struct handle h = {{8, 1 }, { 12, }}; open_by_handle_at(AT_FDCWD, &h.fh, O_RDONLY); return 0; } Google-Bug-Id: 120690101 Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
Theodore Ts'o authored
In ext4_expand_extra_isize_ea(), we calculate the total size of the xattr header, plus the xattr entries so we know how much of the beginning part of the xattrs to move when expanding the inode extra size. We need to include the terminating u32 at the end of the xattr entries, or else if there is uninitialized, non-zero bytes after the xattr entries and before the xattr values, the list of xattr entries won't be properly terminated. Reported-by:
Steve Graham <stgraham2000@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
- 10 Dec, 2018 1 commit
-
-
Chengguang Xu authored
If new mode is the same as old mode we don't have to reset inode mode in the rest of the code, so compare old and new mode before setting update_mode flag. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- 04 Dec, 2018 9 commits
-
-
ruippan (潘睿) authored
Commit e2b911c5 ("ext4: clean up feature test macros with predicate functions") broke the EXT4_IOC_GROUP_ADD ioctl. This was not noticed since only very old versions of resize2fs (before e2fsprogs 1.42) use this ioctl. However, using a new kernel with an enterprise Linux userspace will cause attempts to use online resize to fail with "No reserved GDT blocks". Fixes: e2b911c5 ("ext4: clean up feature test macros with predicate...") Cc: stable@kernel.org # v4.4 Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
ruippan (潘睿) <ruippan@tencent.com>
-
Eric Sandeen authored
As dax inches closer to production use, an administrator should not be surprised by silently disabling the feature they asked for. Signed-off-by:
Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Alexander Lochmann authored
The following members of struct transaction_s aka transaction_t were turned into lock-free variables in the past: - t_updates - t_outstanding_credits - t_handle_count However, the documentation has not been updated yet. This commit replaced the annotated lock by [none]. Found by LockDoc (Alexander Lochmann, Horst Schirmeier and Olaf Spinczyk) Signed-off-by:
Alexander Lochmann <alexander.lochmann@tu-dortmund.de> Signed-off-by:
Horst Schirmeier <horst.schirmeier@tu-dortmund.de> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Chengguang Xu authored
ext4_xattr_destroy_cache() can handle NULL pointer correctly, so there is no need to check NULL pointer before calling ext4_xattr_destroy_cache(). Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Colin Ian King authored
There is a statement that is indented with spaces, replace it with a tab. Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Colin Ian King authored
There are several lines that are indented too far, clean these up by removing the tabs. Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Maurizio Lombardi authored
In case of error, ext4_try_to_write_inline_data() should unlock and release the page it holds. Fixes: f19d5870 ("ext4: add normal write support for inline data") Cc: stable@kernel.org # 3.8 Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Pan Bian authored
The function frees qf_inode via iput but then pass qf_inode to lockdep_set_quota_inode on the failure path. This may result in a use-after-free bug. The patch frees df_inode only when it is never used. Fixes: daf647d2 ("ext4: add lockdep annotations for i_data_sem") Cc: stable@kernel.org # 4.6 Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
We can hold j_state_lock for writing at the beginning of jbd2_journal_commit_transaction() for a rather long time (reportedly for 30 ms) due cleaning revoke bits of all revoked buffers under it. The handling of revoke tables as well as cleaning of t_reserved_list, and checkpoint lists does not need j_state_lock for anything. It is only needed to prevent new handles from joining the transaction. Generally T_LOCKED transaction state prevents new handles from joining the transaction - except for reserved handles which have to allowed to join while we wait for other handles to complete. To prevent reserved handles from joining the transaction while cleaning up lists, add new transaction state T_SWITCH and watch for it when starting reserved handles. With this we can just drop the lock for operations that don't need it. Reported-and-tested-by:
Adrian Hunter <adrian.hunter@intel.com> Suggested-by:
"Theodore Y. Ts'o" <tytso@mit.edu> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- 25 Nov, 2018 6 commits
-
-
Theodore Ts'o authored
Today, when sb_bread() returns NULL, this can either be because of an I/O error or because the system failed to allocate the buffer. Since it's an old interface, changing would require changing many call sites. So instead we create our own ext4_sb_bread(), which also allows us to set the REQ_META flag. Also fixed a problem in the xattr code where a NULL return in a function could also mean that the xattr was not found, which could lead to the wrong error getting returned to userspace. Fixes: ac27a0ec ("ext4: initial copy of files from ext3") Cc: stable@kernel.org # 2.6.19 Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Linus Torvalds authored
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Two dma-direct / swiotlb regressions fixes: - zero is a valid physical address on some arm boards, we can't use it as the error value - don't try to cache flush the error return value (no matter what it is)" * tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: Skip cache maintenance on map error dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Fix a NFSv4 state manager deadlock when returning a delegation - NFSv4.2 copy do not allocate memory under the lock - flexfiles: Use the correct stateid for IO in the tightly coupled case * tag 'nfs-for-4.20-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: flexfiles: use per-mirror specified stateid for IO NFSv4.2 copy do not allocate memory under the lock NFSv4: Fix a NFSv4 state manager deadlock
-
Luc Van Oostenryck authored
I'm taking over the maintainance of Sparse so add myself as maintainer and move Christopher's info to CREDITS. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/willy/linux-daxLinus Torvalds authored
Pull XArray updates from Matthew Wilcox: "We found some bugs in the DAX conversion to XArray (and one bug which predated the XArray conversion). There were a couple of bugs in some of the higher-level functions, which aren't actually being called in today's kernel, but surfaced as a result of converting existing radix tree & IDR users over to the XArray. Some of the other changes to how the higher-level APIs work were also motivated by converting various users; again, they're not in use in today's kernel, so changing them has a low probability of introducing a bug. Dan can still trigger a bug in the DAX code with hot-offline/online, and we're working on tracking that down" * tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax: XArray tests: Add missing locking dax: Avoid losing wakeup in dax_lock_mapping_entry dax: Fix huge page faults dax: Fix dax_unlock_mapping_entry for PMD pages dax: Reinstate RCU protection of inode dax: Make sure the unlocking entry isn't locked dax: Remove optimisation from dax_lock_mapping_entry XArray tests: Correct some 64-bit assumptions XArray: Correct xa_store_range XArray: Fix Documentation XArray: Handle NULL pointers differently for allocation XArray: Unify xa_store and __xa_store XArray: Add xa_store_bh() and xa_store_irq() XArray: Turn xa_erase into an exported function XArray: Unify xa_cmpxchg and __xa_cmpxchg XArray: Regularise xa_reserve nilfs2: Use xa_erase_irq XArray: Export __xa_foo to non-GPL modules XArray: Fix xa_for_each with a single element at 0
-
- 24 Nov, 2018 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - revert of the high-resolution scrolling feature, as it breaks certain hardware due to incompatibilities between Logitech and Microsoft worlds. Peter Hutterer is working on a fixed implementation. Until that is finished, revert by Benjamin Tissoires. - revert of incorrect strncpy->strlcpy conversion in uhid, from David Herrmann - fix for buggy sendfile() implementation on uhid device node, from Eric Biggers - a few assorted device-ID specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Revert "Input: Add the `REL_WHEEL_HI_RES` event code" Revert "HID: input: Create a utility class for counting scroll events" Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"" Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice" Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice" Revert "HID: logitech: fix a used uninitialized GCC warning" Revert "HID: input: simplify/fix high-res scroll event handling" HID: Add quirk for Primax PIXART OEM mice HID: i2c-hid: Disable runtime PM for LG touchscreen HID: multitouch: Add pointstick support for Cirque Touchpad HID: steam: remove input device when a hid client is running. Revert "HID: uhid: use strlcpy() instead of strncpy()" HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges HID: input: Ignore battery reported by Symbol DS4308 HID: Add quirk for Microsoft PIXART OEM mouse
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas:: - Fix wrong conflict resolution around CONFIG_ARM64_SSBD - Fix sparse warning on unsigned long constant * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD block arm64: sysreg: fix sparse warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter. 2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann. 3) Fix socket wmem accounting in SCTP, from Xin Long. 4) Fix failed resume crash in ena driver, from Arthur Kiyanovski. 5) qed driver passes bytes instead of bits into second arg of bitmap_weight(). From Denis Bolotin. 6) Fix reset deadlock in ibmvnic, from Juliet Kim. 7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr Machata. 8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK compression during this period, from Eric Dumazet. 9) Add atomicity to SMC protocol cursor handling, from Ursula Braun. 10) Don't leave dangling error pointer if bpf_prog_add() fails in thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO headers, set sq->tso_hdrs to NULL. 11) Fix race condition over state variables in act_police, from Davide Caratti. 12) Disable guest csum in the presence of XDP in virtio_net, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits) net: gemini: Fix copy/paste error net: phy: mscc: fix deadlock in vsc85xx_default_config dt-bindings: dsa: Fix typo in "probed" net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue net: amd: add missing of_node_put() team: no need to do team_notify_peers or team_mcast_rejoin when disabling port virtio-net: fail XDP set if guest csum is negotiated virtio-net: disable guest csum during XDP set net/sched: act_police: add missing spinlock initialization net: don't keep lonely packets forever in the gro hash net/ipv6: re-do dad when interface has IFF_NOARP flag change packet: copy user buffers before orphan or clone ibmvnic: Update driver queues after change in ring size support ibmvnic: Fix RX queue buffer cleanup net: thunderx: set xdp_prog to NULL if bpf_prog_add fails net/dim: Update DIM start sample after each DIM iteration net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts net/smc: use after free fix in smc_wr_tx_put_slot() net/smc: atomic SMCD cursor handling net/smc: add SMC-D shutdown signal ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Dave and I have continued our work fixing corruption problems that can be found when running long-term burn-in exercisers on xfs. Here are some patches fixing most of the problems, but there will likely be more. :/ - Numerous corruption fixes for copy on write - Numerous corruption fixes for blocksize < pagesize writes - Don't miscalculate AG reservations for small final AGs - Fix page cache truncation to work properly for reflink and extent shifting - Fix use-after-free when retrying failed inode/dquot buffer logging - Fix corruptions seen when using copy_file_range in directio mode" * tag 'xfs-4.20-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: readpages doesn't zero page tail beyond EOF vfs: vfs_dedupe_file_range() doesn't return EOPNOTSUPP iomap: dio data corruption and spurious errors when pipes fill iomap: sub-block dio needs to zeroout beyond EOF iomap: FUA is wrong for DIO O_DSYNC writes into unwritten extents xfs: delalloc -> unwritten COW fork allocation can go wrong xfs: flush removing page cache in xfs_reflink_remap_prep xfs: extent shifting doesn't fully invalidate page cache xfs: finobt AG reserves don't consider last AG can be a runt xfs: fix transient reference count error in xfs_buf_resubmit_failed_buffers xfs: uncached buffer tracing needs to print bno xfs: make xfs_file_remap_range() static xfs: fix shared extent data corruption due to missing cow reservation
-
Andreas Fiedler authored
The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by:
Andreas Fiedler <andreas.fiedler@gmx.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Quentin Schulz authored
The vsc85xx_default_config function called in the vsc85xx_config_init function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs mistakenly calls phy_read and phy_write in-between phy_select_page and phy_restore_page. phy_select_page and phy_restore_page actually take and release the MDIO bus lock and phy_write and phy_read take and release the lock to write or read to a PHY register. Let's fix this deadlock by using phy_modify_paged which handles correctly a read followed by a write in a non-standard page. Fixes: 6a0bfbbe ("net: phy: mscc: migrate to phy_select/restore_page functions") Signed-off-by:
Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabio Estevam authored
The correct form is "can be probed", so fix the typo. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f5 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yangtao Li authored
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by:
Liang Li <liali@redhat.com> Fixes: fc423ff0 ("team: add peer notification") Fixes: 492b200e ("team: add support for sending multicast rejoins") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Nov, 2018 4 commits
-
-
Jason Wang authored
We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b690 ("virtio_net: Add XDP support") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we can receive partial csumed packets with metadata kept in the vnet_hdr. This may have several side effects: - It could be overridden by header adjustment, thus is might be not correct after XDP processing. - There's no way to pass such metadata information through XDP_REDIRECT to another driver. - XDP does not support checksum offload right now. So simply disable guest csum if possible in this the case of XDP. Fixes: 3f93522f ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pullk ceph fix from Ilya Dryomov: "A messenger fix, marked for stable" * tag 'ceph-for-4.20-rc4' of https://github.com/ceph/ceph-client: libceph: fall back to sendmsg for slab pages
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Just a single fix for this week, fixing an issue with nvme-fc" * tag 'for-linus-20181123' of git://git.kernel.dk/linux-block: nvme-fc: resolve io failures during connect
-