- 29 Apr, 2019 40 commits
-
-
Bart Van Assche authored
Since qla24xx_async_abort_cmd() is only called from inside qla_init.c, declare that function static. Reorder a few functions to avoid that any forward declarations are needed. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
All callbacks from the target core into the qla2xxx driver and also all I/O completion functions are serialized per command. Since .cmd_sent_to_fw and .trc_flags are only modified from inside these functions it is not necessary to protect it with locking. Remove the superfluous locking. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since the previous patch removed the only statement that sets qla_tgt_cmd.released, remove the code that depends on that member variable being set and the member variable itself. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
The previous patch guarantees that a command is only released after the firmware has finished processing it. Hence complain if a command is released that is owned by the firmware. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Remove the function qlt_abort_cmd_on_host_reset() because it can do the following, all of which can cause a kernel crash: - DMA unmapping while DMA is in progress. - Call target_execute_cmd() while DMA is in progress. - Call transport_generic_free_cmd() while the LIO core owns a command. Instead of trying to abort a command asynchronously, set the 'aborted' flag and handle the abort after the hardware has passed control back to the tcm_qla2xxx driver. Cc: Arun Easi <arun.easi@qlogic.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: c0cb4496 ("qla2xxx: Add Host reset handling in target mode.") # v3.18. Signed-off-by:
-
Bart Van Assche authored
Implementations of the .write_pending() callback functions must guarantee that an appropriate LIO core callback function will be called immediately or at a later time. Make sure that this guarantee is met for aborted SCSI commands. [mkp: typo] Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 694833ee ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13. Fixes: a07100e0 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5. Signed-off-by:
-
Bart Van Assche authored
The test "if (!cmd)" is not useful because it is guaranteed that cmd != NULL. Instead of testing the cmd pointer, rely on the tag to decide whether or not command allocation failed. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 33e79977 ("qla2xxx: Add support for QFull throttling and Term Exchange retry") # v3.18. Signed-off-by:
-
Bart Van Assche authored
All qlt_send_term_imm_notif() callers pass '1' as second argument to this function. Hence remove the (broken) code that depends on that second argument having another value. Add a pr_debug() statement that prints rc to avoid that the compiler would complain that rc has been set but is not used. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
The current order for freeing memory is as follows: - struct crc_context itself. - struct crc_context member pointers. Change the freeing order into the following: - struct crc_context member pointers. - struct crc_context itself. Detected by Coverity. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 50b81275 ("scsi: qla2xxx: Fix DMA error when the DIF sg buffer crosses 4GB boundary") # v5.1-rc1. Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality.") # v4.10. Signed-off-by:
-
Bart Van Assche authored
Make sure that the allocated interrupts are freed if allocating memory for the msix_entries array fails. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Clear each pointer after having freed memory such that it becomes safe to call qla2x00_mem_free() twice. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Instead of clearing all freed pointers at the end of qla2x00_mem_free(), clear freed pointers immediately after having freed the memory these pointers point at. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
This patch avoids that Coverity complains that qla2x00_async_event() writes outside the bounds of the mb[] arrays (MBA_IDC_AEN case). Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
It is important to know why a firmware command failed. Hence log 'rval' together with the values of the mailbox registers if a firwmare command fails. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since Coverity cannot know that rport != NULL in qla2xxx_queuecommand() and since there is code in that function that dereferences the rport pointer, modify qla2xxx_queuecommand() such that it fails SCSI commands if rport == NULL. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Testing whether a pointer is not NULL after it has been dereferenced is not useful. Hence remove the if (fcport) test. This was detected by Coverity. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since qla2x00_init_timer() is not used for I/O commands there is no need to inline this function. Hence uninline this function. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
The previous patch moved all qla2x00_is_reserved_id() callers into qla_init.c. Hence also move the qla2x00_is_reserved_id() definition into qla_init.c. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since qla2x00_clear_loop_id() is not in the hot path, uninline it. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since all qla2x00_find_new_loop_id() calls occur in the same source file as the definition of this function, move that function to just before its first caller and declare it static. Convert the header above this function into kernel-doc format. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since qla2x00_set_reserved_loop_ids() only has a single caller, move it into the source file from where it is called. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since mcmd->sess->port_name is eight bytes long, use %8phC to format that port name instead of %phC. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery") # v4.11. Signed-off-by:
-
Bart Van Assche authored
Change one occurrence of "*(" into "()" and change one occurrence of "lcoate" into "locate". Fix the reference to qla_tgt_handle_cmd_for_atio(): there has never been a function with that name. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 75f8c1f6 ("[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core") # v3.5. Fixes: 2d70c103 ("[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series") # v3.5. Signed-off-by: -
Bart Van Assche authored
Hibernation hangs as follows due to commit 21e6ba3f when using SATA: Call Trace: __schedule+0x464/0xe70 schedule+0x4e/0xd0 blk_queue_enter+0x5fe/0x7e0 generic_make_request+0x313/0x950 submit_bio+0x9b/0x250 submit_bio_wait+0xc9/0x110 hib_submit_io+0x17d/0x1c0 write_page+0x61/0xa0 swap_write_page+0x4b/0x1f0 swsusp_write+0x2f9/0x3d0 hibernate.cold.10+0x108/0x231 state_store+0xf7/0x100 kobj_attr_store+0x37/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x186/0x240 __vfs_write+0x4d/0x90 vfs_write+0xfa/0x260 ksys_write+0xb9/0x1a0 __x64_sys_write+0x43/0x50 do_syscall_64+0x71/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe Hence revert commit 21e6ba3f. Cc: Pavel Machek <pavel@ucw.cz> Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Bart Van Assche authored
Reverts commit d16ece57 to make a clean revert of its predecessor possible. Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Pedro Sousa authored
Fix RX_TERMINATION_FORCE_ENABLE define value from 0x0089 to 0x00A9 according to MIPI Alliance MPHY specification. Fixes: e785060e ("ufs: definitions for phy interface") Signed-off-by:
Pedro Sousa <sousa@synopsys.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/qedf/qedf_els.c: In function 'qedf_process_els_compl': drivers/scsi/qedf/qedf_els.c:149:20: warning: variable 'sc_cmd' set but not used [-Wunused-but-set-variable] drivers/scsi/qedf/qedf_els.c:148:28: warning: variable 'task_ctx' set but not used [-Wunused-but-set-variable] drivers/scsi/qedf/qedf_els.c: In function 'qedf_send_srr': drivers/scsi/qedf/qedf_els.c:612:6: warning: variable 'sid' set but not used [-Wunused-but-set-variable] They are never used since introduction. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
Update the driver version to 8.37.25.20. Signed-off-by:
-
Saurav Kashyap authored
Print return value of scsi_add_host on failure. Signed-off-by:
-
Saurav Kashyap authored
Log fcport for which upload failed. Signed-off-by:
-
Saurav Kashyap authored
Log the reason for start xmit failure. Signed-off-by:
Chad Dupuis <cdupuis@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
Print message on scsi_add_host failure. Signed-off-by:
-
Saurav Kashyap authored
Print the fcoe_libfc_config failure and return proper failure. Signed-off-by:
Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Saurav Kashyap authored
Comment will help in decoding the logging level. Signed-off-by:
-
Chad Dupuis authored
Port ID will help in debugging. Signed-off-by:
-
Chad Dupuis authored
Print LBA information for underrun cases. Signed-off-by:
-
Chad Dupuis authored
Printing scsi command pointer will help in crash dump analysis. Signed-off-by:
-
Chad Dupuis authored
Add debugfs node for driver stats. [mkp: typo] Signed-off-by:
-
Chad Dupuis authored
Change the message to display load failure. Signed-off-by:
-
