- 15 Apr, 2021 1 commit
-
-
Florent Revest authored
It is just missing a ';'. This macro is not used by any test yet. Fixes: 22ba3635 ("selftests/bpf: Move and extend ASSERT_xxx() testing macros") Signed-off-by:
Florent Revest <revest@chromium.org> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210414155632.737866-1-revest@chromium.org
-
- 14 Apr, 2021 2 commits
-
-
Toke Høiland-Jørgensen authored
Extend the fexit_bpf2bpf test to check that the info for the bpf_link returned by the kernel matches the expected values. While we're updating the test, change existing uses of CHEC() to use the much easier to read ASSERT_*() macros. v2: - Convert last CHECK() call and get rid of 'duration' var - Split ASSERT_OK_PTR() checks to two separate if statements Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
-
Toke Høiland-Jørgensen authored
There is currently no way to discover the target of a tracing program attachment after the fact. Add this information to bpf_link_info and return it when querying the bpf_link fd. Signed-off-by:
-
- 13 Apr, 2021 2 commits
-
-
Ilya Leoshkevich authored
pahole v1.21 supports the --btf_gen_floats flag, which makes it generate the information about the floating-point types [1]. Adjust link-vmlinux.sh to pass this flag to pahole in case it's supported, which is determined using a simple version check. [1] https://lore.kernel.org/dwarves/YHRiXNX1JUF2Az0A@kernel.org/Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
-
Pedro Tammela authored
In 'bpf_ringbuf_reserve()' we require the flag to '0' at the moment. For 'bpf_ringbuf_{discard,submit,output}' a flag of '0' might send a notification to the process if needed. Signed-off-by:Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
-
- 12 Apr, 2021 4 commits
-
-
Cong Wang authored
The last refcnt of the psock can be gone right after sock_map_remove_links(), so sk_psock_stop() could trigger a UAF. The reason why I placed sk_psock_stop() there is to avoid RCU read critical section, and more importantly, some callee of sock_map_remove_links() is supposed to be called with RCU read lock, we can not simply get rid of RCU read lock here. Therefore, the only choice we have is to grab an additional refcnt with sk_psock_get() and put it back after sk_psock_stop(). Fixes: 799aa7f9 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") Reported-by: syzbot+7b6548ae483d6f4c64ae@syzkaller.appspotmail.com Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210408030556.45134-1-xiyou.wangcong@gmail.com
-
Cong Wang authored
Using sk_psock() to retrieve psock pointer from sock requires RCU read lock, but we already get psock pointer before calling ->psock_update_sk_prot() in both cases, so we can just pass it without bothering sk_psock(). Fixes: 8a59f9d1 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") Reported-by: syzbot+320a3bc8d80f478c37e4@syzkaller.appspotmail.com Signed-off-by:
-
Daniel Borkmann authored
Synchronize tools/include/uapi/linux/bpf.h which was missing changes from various commits: - f3c45326 ("bpf: Document PROG_TEST_RUN limitations") - e5e35e75 ("bpf: BPF-helper for MTU checking add length input") Signed-off-by:
-
Joe Stringer authored
Per net/bpf/test_run.c, particular prog types have additional restrictions around the parameters that can be provided, so document these in the header. I didn't bother documenting the limitation on duration for raw tracepoints since that's an output parameter anyway. Tested with ./tools/testing/selftests/bpf/test_doc_build.sh. Suggested-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Joe Stringer <joe@cilium.io> Signed-off-by:
Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210410174549.816482-1-joe@cilium.io
-
- 09 Apr, 2021 10 commits
-
-
Andrii Nakryiko authored
Yauheni Kaliuta says: ==================== A set of fixes for selftests to make them working on systems with PAGE_SIZE > 4K + cleanup (version) and ringbuf_multi extention. --- v3->v4: - zero initialize BPF programs' static variables; - add bpf_map__inner_map to libbpf.map in alphabetical order; - add bpf_map__set_inner_map_fd test to ringbuf_multi; v2->v3: - reorder: move version removing patch first to keep main patches in one group; - rename "selftests/bpf: pass page size from userspace in sockopt_sk" as suggested; - convert sockopt_sk test to use ASSERT macros; - set page size from userspace - split patches to pairs userspace/bpf. It's easier to check that every conversion works as expected; v1->v2: - add missed 'selftests/bpf: test_progs/sockopt_sk: Convert to use BPF skeleton' ==================== Signed-off-by: -
Yauheni Kaliuta authored
Test map__set_inner_map_fd() interaction with map-in-map initialization. Use hashmap of maps just to make it different to existing array of maps. Signed-off-by:
Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by:
-
Yauheni Kaliuta authored
Set bpf table sizes dynamically according to the runtime page size value. Do not switch to ASSERT macros, keep CHECK, for consistency with the rest of the test. Can be a separate cleanup patch. Signed-off-by:
-
Andrii Nakryiko authored
The API gives access to inner map for map in map types (array or hash of map). It will be used to dynamically set max_entries in it. Signed-off-by:
-
Yauheni Kaliuta authored
Replace hardcoded 4096 with runtime value in the userspace part of the test and set bpf table sizes dynamically according to the value. Do not switch to ASSERT macros, keep CHECK, for consistency with the rest of the test. Can be a separate cleanup patch. Signed-off-by:
-
Yauheni Kaliuta authored
Replace hardcoded 4096 with runtime value in the userspace part of the test and set bpf table sizes dynamically according to the value. Do not switch to ASSERT macros, keep CHECK, for consistency with the rest of the test. Can be a separate cleanup patch. Signed-off-by:
-
Yauheni Kaliuta authored
Use ASSERT to check result but keep CHECK where format was used to report error. Use bpf_map__set_max_entries() to set map size dynamically from userspace according to page size. Zero-initialize the variable in bpf prog, otherwise it will cause problems on some versions of Clang. Signed-off-by:
-
Yauheni Kaliuta authored
Since there is no convenient way for bpf program to get PAGE_SIZE from inside of the kernel, pass the value from userspace. Zero-initialize the variable in bpf prog, otherwise it will cause problems on some versions of Clang. Signed-off-by:
-
Yauheni Kaliuta authored
Switch the test to use BPF skeleton to save some boilerplate and make it easy to access bpf program bss segment. The latter will be used to pass PAGE_SIZE from userspace since there is no convenient way for bpf program to get it from inside of the kernel. Signed-off-by:
-
Yauheni Kaliuta authored
As pointed by Andrii Nakryiko, _version is useless now, remove it. Signed-off-by:
-
- 06 Apr, 2021 2 commits
-
-
Muhammad Usama Anjum authored
bpf_preload_lock is already defined with DEFINE_MUTEX(). There is no need to initialize it again. Remove the extraneous initialization. Signed-off-by:
Muhammad Usama Anjum <musamaanjum@gmail.com> Signed-off-by:
-
Cong Wang authored
These comments in udp_bpf_update_proto() are copied from the original TCP code and apparently do not apply to UDP. Just remove them. Reported-by:
-
- 05 Apr, 2021 1 commit
-
-
Hengqi Chen authored
Add missing ')' for KERNEL_VERSION macro. Signed-off-by:
Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by:
-
- 03 Apr, 2021 1 commit
-
-
Martin KaFai Lau authored
The tracing test and the recent kfunc call test require CONFIG_DYNAMIC_FTRACE. This patch adds it to the config file. Signed-off-by:
-
- 02 Apr, 2021 17 commits
-
-
Yang Yingliang authored
Remove redundant semi-colon in finalize_btf_ext(). Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Wan Jiabing authored
struct btf_type is declared twice. One is declared at 35th line. The below one is not needed, hence remove the duplicate. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210401072037.995849-1-wanjiabing@vivo.com
-
Wan Jiabing authored
struct bpf_prog is declared twice. There is one declaration which is independent on the macro at 18th line. So the below one is not needed though. Remove the duplicate. Signed-off-by:
-
He Fengqing authored
'stack' parameter is not used in ___bpf_prog_run() after f696b8f4 ("bpf: split bpf core interpreter"), the base address have been set to FP reg. So consequently remove it. Signed-off-by:
He Fengqing <hefengqing@huawei.com> Signed-off-by:
-
John Fastabend authored
With a relatively recent clang master branch test_map skips a section, libbpf: elf: skipping unrecognized data section(5) .rodata.str1.1 the cause is some pointless strings from bpf_printks in the BPF program loaded during testing. After just removing the prints to fix above error Daniel points out the program is a bit pointless and could be simply the empty program returning SK_PASS. Here we do just that and return simply SK_PASS. This program is used with test_maps selftests to test insert/remove of a program into the sockmap and sockhash maps. Its not testing actual functionality of the TCP sockmap programs, these are tested from test_sockmap. So we shouldn't lose in test coverage and fix above warnings. This original test was added before test_sockmap existed and has been copied around ever since, clean it up now. Signed-off-by:
-
Eric Dumazet authored
Group all the often used fields in the first cache line, to reduce cache line misses. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Order fields to increase locality for most used protocols. udplite and icmp are moved at the end. Same for proc_net_devsnmp6 which is not used in fast path. This potentially saves one cache line miss for typical TCP/UDP over IPv4/IPv6. Signed-off-by:
-
Dan Carpenter authored
If the "type_a->nfcid_len" is too large then it would lead to memory corruption in pn533_target_found_type_a() when we do: memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len); Fixes: c3b1e1e8 ("NFC: Export NFCID1 from pn533") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add rx copybreak support DMA unmapping, allocating a new buffer and DMA mapping it back on the refill path is really not that efficient. Proper buffer recycling (page pool, flipping the page and using the other half) cannot be done for DPAA2 since it's not a ring based controller but it rather deals with multiple queues which all get their buffers from the same buffer pool on Rx. To circumvent these limitations, add support for Rx copybreak in dpaa2-eth. Below you can find a summary of the tests that were run to end up with the default rx copybreak value of 512. A bit about the setup - a LS2088A SoC, 8 x Cortex A72 @ 1.8GHz, IPfwd zero loss test @ 20Gbit/s throughput. I tested multiple frame sizes to get an idea where is the break even point. Here are 2 sets of results, (1) is the baseline and (2) is just allocating a new skb for all frames sizes received (as if the copybreak was even to the MTU). All numbers are in Mpps. 64 128 256 512 640 768 896 (1) 3.23 3.23 3.24 3.21 3.1 2.76 2.71 (2) 3.95 3.88 3.79 3.62 3.3 3.02 2.65 It seems that even for 512 bytes frame sizes it's comfortably better when allocating a new skb. After that, we see diminishing rewards or even worse. Changes in v2: - properly marked dpaa2_eth_copybreak as static ==================== Signed-off-by: -
Ioana Ciornei authored
It's useful, especially for debugging purposes, to have the Rx copybreak value changeable at runtime. Export it as an ethtool tunable. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Ioana Ciornei authored
DMA unmapping, allocating a new buffer and DMA mapping it back on the refill path is really not that efficient. Proper buffer recycling (page pool, flipping the page and using the other half) cannot be done for DPAA2 since it's not a ring based controller but it rather deals with multiple queues which all get their buffers from the same buffer pool on Rx. To circumvent these limitations, add support for Rx copybreak. For small sized packets instead of creating a skb around the buffer in which the frame was received, allocate a new sk buffer altogether, copy the contents of the frame and release the initial page back into the buffer pool. Signed-off-by:
-
Ioana Ciornei authored
Rename the dpaa2_eth_xdp_release_buf function into dpaa2_eth_recycle_buf since in the next patches we'll be using the same recycle mechanism for the normal stack path beside for XDP_DROP. Also, rename the array which holds the buffers to be recycled so that it does not have any reference to XDP. Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== MPTCP: Miscellaneous changes Here is a collection of patches from the MPTCP tree: Patches 1 and 2 add some helpful MIB counters for connection information. Patch 3 cleans up some unnecessary checks. Patch 4 is a new feature, support for the MP_TCPRST option. This option is used when resetting one subflow within a MPTCP connection, and provides a reason code that the recipient can use when deciding how to adapt to the lost subflow. Patches 5-7 update the existing MPTCP selftests to improve timeout handling and to share better information when tests fail. ==================== Signed-off-by: -
Matthieu Baerts authored
Very occasionally, MPTCP selftests fail. Yeah, I saw that at least once! Here we provide more details in case of errors with mptcp_join.sh script like it was done with mptcp_connect.sh, see commit 767389c8 ("selftests: mptcp: dump more info on errors") Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Matthieu Baerts authored
Not to be impacted by packets sent between sub-tests. Signed-off-by:
-
Matthieu Baerts authored
'mptcp_connect' already has a timeout for poll() but in some cases, it is not enough. With "timeout" tool, we will force the command to fail if it doesn't finish on time. Thanks to that, the script will continue and display details about the current state before marking the test as failed. Displaying this state is very important to be able to understand the issue. Best to have our CI reporting the issue than just "the test hanged". Note that in mptcp_connect.sh, we were using a long timeout to validate the fact we cannot create a socket if a sysctl is set. We don't need this timeout. In diag.sh, we want to send signals to mptcp_connect instances that have been started in the netns. But we cannot send this signal to 'timeout' otherwise that will stop the timeout and messages telling us SIGUSR1 has been received will be printed. Instead of trying to find the right PID and storing them in an array, we can simply use the output of 'ip netns pids' which is all the PIDs we want to send signal to. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160Signed-off-by:
-
Florian Westphal authored
The MPTCP reset option allows to carry a mptcp-specific error code that provides more information on the nature of a connection reset. Reset option data received gets stored in the subflow context so it can be sent to userspace via the 'subflow closed' netlink event. When a subflow is closed, the desired error code that should be sent to the peer is also placed in the subflow context structure. If a reset is sent before subflow establishment could complete, e.g. on HMAC failure during an MP_JOIN operation, the mptcp skb extension is used to store the reset information. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
