- 28 Mar, 2020 1 commit
-
-
Martin Blumenstingl authored
Most platforms with a Mali-400 or Mali-450 GPU also have support for changing the GPU clock frequency. Add devfreq support so the GPU clock rate is updated based on the actual GPU usage when the "operating-points-v2" property is present in the board.dts. The actual devfreq code is taken from panfrost_devfreq.c and modified so it matches what the lima hardware needs: - a call to dev_pm_opp_set_clkname() during initialization because there are two clocks on Mali-4x0 IPs. "core" is the one that actually clocks the GPU so we need to control it using devfreq. - locking when reading or writing the devfreq statistics because (unlike than panfrost) we have multiple PP and GP IRQs which may finish jobs concurrently. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200319203427.2259891-3-martin.blumenstingl@googlemail.com
-
- 27 Mar, 2020 5 commits
-
-
Sean Paul authored
Now that we can support multiple simultaneous replies, remove the restrictions placed on sending new tx msgs. This patch essentially just reverts commit 5a64967a ("drm/dp_mst: Have DP_Tx send one msg at a time") now that the problem is solved in a different way. Cc: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Wayne Lin <waynelin@amd.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200213211523.156998-4-sean@poorly.run
-
Sean Paul authored
Currently we have one down reply message servicing the mst manager, so we need to serialize all tx msgs to ensure we only have one message in flight at a time. For obvious reasons this is suboptimal (but less suboptimal than the free-for-all we had before serialization). This patch removes the single down_rep_recv message from manager and adds 2 replies in the branch structure. The 2 replies mirrors the tx_slots which we use to rate-limit outgoing messages and correspond to seqno in the packet headers. Cc: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by:
-
Sean Paul authored
In preparation of per-branch device down message handling, separate header parsing from message building. This will allow us to peek at figure out which branch device the message is from before starting to parse the message contents. Reviewed-by:
-
Hans de Goede authored
Currently drivers using drm_fbdev_generic_setup() end up with a single empty aperture in their fb_info struct. Not having the proper info in the apertures list causes register_framebuffer to not remove conflicting framebuffers, which some drivers currently workaround by manually calling drm_fb_helper_remove_conflicting_pci_framebuffers(). Add a TODO as a reminder that we need to fix this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200326151009.102377-1-hdegoede@redhat.com
-
Marek Szyprowski authored
Don't confuse user with meaningless warning about failure in getting regulators in case of deferred probe. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226101307.16708-1-m.szyprowski@samsung.com
-
- 26 Mar, 2020 34 commits
-
-
Daniel Vetter authored
All collected together to provide a consistent story in one patch, instead of the somewhat bumpy refactor-evolution leading to this. Also some thoughts on what the next steps could be: - Create a macro called devm_drm_dev_alloc() which essentially wraps the kzalloc(); devm_drm_dev_init(); drmm_add_final_kfree() combo. Needs to be a macro since we'll have to do some typeof trickery and casting to make this fully generic for all drivers that embed struct drm_device into their own thing. - A lot of the simple drivers now have essentially just drm_dev_unplug(); drm_atomic_helper_shutdown(); as their $bus_driver->remove hook. We could create a devm_mode_config_reset which sets drm_atomic_helper_shutdown as it's cleanup action, and a devm_drm_dev_register with drm_dev_unplug as it's cleanup action, and simple drivers wouldn't have a need for a ->remove function at all, and we could delete them. - For more complicated drivers we need drmm_ versions of a _lot_ more things. All the userspace visible objects (crtc, plane, encoder, crtc), anything else hanging of those (maybe a drmm_get_edid, at least for panels and other built-in stuff). Also some more thoughts on why we're not reusing devm_ with maybe a fake struct device embedded into the drm_device (we can't use the kdev, since that's in each drm_minor). - Code review gets extremely tricky, since every time you see a devm_ you need to carefully check whether the fake device (with the drm_device lifetim) or the real device (with the lifetim of the underlying physical device and driver binding) are used. That's not going to help at all, and we have enormous amounts of drivers who use devm_ where they really shouldn't. Having different types makes sure the compiler type checks this for us and ensures correctness. - The set of functions are very much non-overlapping. E.g. devm_ioremap makes total sense, drmm_ioremap has the wrong lifetime, since hw resources need to be cleaned out at driver unbind and wont outlive that like a drm_device. Similar, but other way round for drmm_connector_init (which is the only correct version, devm_ for drm_connector is just buggy). Simply not having the wrong version again prevents bugs. Finally I guess this opens a huge todo for all the drivers. I'm semi-tempted to do a tree-wide s/devm_kzalloc/drmm_kzalloc/ since most likely that'll fix an enormous amount of bugs and most likely not cause any issues at all (aside from maybe holding onto memory slightly too long). v2: - Doc improvements from Laurent. - Also add kerneldoc for the new drmm_add_action_or_reset. v3: - Remove kerneldoc for drmm_remove_action. Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> fixup docs Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-52-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
There's only two functions called from that: drm_kms_helper_poll_fini() and udl_free_urb_list(). Both of these are also called from the ubs_driver->disconnect hook, so entirely pointless to do the same again in the ->release hook. Furthermore by the time we clean up the drm_driver we really shouldn't be touching hardware anymore, so stopping the poll worker and freeing the urb allocations in ->disconnect is the right thing to do. Now disconnect still cleans things up before unregistering the driver, but that's a different issue. v2: Use _fini, not _disable in unplug, motivated by discussions with Thomas. _disable/_enable are for suspend/resume. Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Daniel Vetter authored
It's right above the drm_dev_put(). This allows us to delete a bit of onion unwinding in udl_modeset_init(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Acked-by:
-
Daniel Vetter authored
Allows us to drop the drm_driver.release callback from all drivers, and remove the mipi_dbi_release() function. This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Daniel Vetter authored
7/7 drivers agree that's the right choice, let's do this. This avoids duplicating the same old error checking code over all 7 drivers, which is the motivation here. Acked-by:
-
Daniel Vetter authored
Allows us to drop the drm_driver.release callback. This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) I also noticed that I've failed to add the error checking, __must_check caught that. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v2) Signed-off-by:
-
Daniel Vetter authored
Instead of having a work item that never stops (which really should be a kthread), with a dedicated workqueue to not upset anyone else, use a delayed work. A bunch of changes: - We can throw out all the custom wakeup and requeue logic and state tracking. If we schedule the work with a 0 delay it'll get scheduled immediately. - Persistent state (frame & draw_status_timeout) need to be moved out of the work. - diff is bigger than the changes, biggest chunk is reindenting the work fn because it lost its while loop. Lots of code deleting as consequence all over. Specifically we can delete the drm_driver.release code now! v2: Review from Hans: - Use mod_delayed_work in the plane update path to make sure we do actually schedule immediately). In the worker we still want queue_delayed_work, which won't modify the timeout when the work is already scheduled. Which is exactly what we want if the work races with a plane update. - Switch to system_long_wq, Hans says on usb2 a plane upload can take 80 ms. Reviewed-by:
-
Daniel Vetter authored
Also there's a race in the disconnect implemenation. First shut down, then unplug, leaves a window where userspace could sneak in and restart the entire machinery. With this we can also delete the very un-atomic global pipe_enabled tracking. Reviewed-by:
-
Daniel Vetter authored
Only drops the drm_dev_put, but hey a few lines! Reviewed-by:
-
Daniel Vetter authored
The drm_mode_config_cleanup call we can drop, and all the allocations we can switch over to drmm_kzalloc. Unfortunately the work queue is still present, so can't get rid of the drm_driver->release function outright. v2: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> (v1) Signed-off-by:
-
Daniel Vetter authored
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: Another driver with a bit much devm_kzalloc, which should probably use drmm_kzalloc instead ... I'm pretty sure this one blows up already under KASAN because it's using devm_drm_dev_init, and later on devm_kzalloc. Hence the memory will get freed before the final drm_dev_put (all from the devres code), but the cleanup in that final drm_dev_put will access the just freed memory. Unfortunately fixing this properly needs slightly more work, namely drmm_ versions for all the drm objects (planes, crtc, ...), so that the cleanup actually happens before even drmm_kzalloc would release the underlying memory. Not quite there yet. v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Jyri Sarha <jsarha@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Vetter authored
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: Another driver with a bit much devm_kzalloc, which should probably use drmm_kzalloc instead ... v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Acked-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Acked-by:
-
Daniel Vetter authored
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: Another driver with a bit much devm_kzalloc, which should probably use drmm_kzalloc instead ... v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v2) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Vetter authored
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: Another driver with a bit much devm_kzalloc, which should probably use drmm_kzalloc instead ... v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Philippe Cornu <philippe.cornu@st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Vetter authored
It's (almost, there's some iommu stuff without significance) right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: Another driver with a bit much devm_kzalloc, which should probably use drmm_kzalloc instead ... v2: Explain why this cleanup is possible (Laurent). v3: Jump out at the right label (Francesco) v4: Try again, kbuild caught that I didn't build test this properly ... v5: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Acked-by:
-
Daniel Vetter authored
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: Another driver with a bit much devm_kzalloc, which should probably use drmm_kzalloc instead ... v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v2) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Vetter authored
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: This driver gets its devm_ stuff all wrong wrt drm_device and anything hanging off that. Not the only one unfortunately. v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Acked-by:
-
Daniel Vetter authored
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: This driver gets its devm_ stuff all wrong wrt drm_device and anything hanging off that. Not the only one unfortunately. v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v2) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Vetter authored
Auto-unwind ftw, now possible with the fixed drm_device related management. Aside, clk/regulator seem to be missing devm versions for a bunch of functions, preventing a pile of these simpler drivers from outright losing their ->remove hook. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Daniel Vetter authored
Allows us to drop the drm_driver.release callback. This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Acked-by:
-
Daniel Vetter authored
Allows us to drop the drm_driver.release callback. This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Acked-by:
-
Daniel Vetter authored
With the drm_device lifetime fun cleaned up there's nothing in the way anymore to use devm_ for everything hw releated. Do it, and in the process, throw out the entire onion unwinding. Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Daniel Vetter authored
We can even delete the drm_driver.release hook now! This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Acked-by:
-
Daniel Vetter authored
Instead rely on the automatic clean, for which we just need to check that drm_mode_config_init succeeded. To avoid an inversion in the cleanup we also have to move the dev_private allocation over to drmm_kzalloc. This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Acked-by:
-
Daniel Vetter authored
Small mistake that crept into commit 81da8c3b Author: Gerd Hoffmann <kraxel@redhat.com> Date: Tue Feb 11 14:52:18 2020 +0100 drm/bochs: add drm_driver.release callback where drm_atomic_helper_shutdown was left in both places. The ->release callback really shouldn't touch hardware. Acked-by:
-
Daniel Vetter authored
drm_mode_config_cleanup is idempotent, so no harm in calling this twice. This allows us to gradually switch drivers over by removing explicit drm_mode_config_cleanup calls. With this step it's now also possible that (at least for simple drivers) automatic resource cleanup can be done correctly without a drm_driver->release hook. Therefore allow this now in devm_drm_dev_init(). Also with drmm_ explicit drm_driver->release hooks are kinda not the best option: Drivers can always just register their current release hook with drmm_add_action, but even better they could split them up to simplify the unwinding for the driver load failure case. So deprecate that hook to discourage future users. v2: Fixup the example in the kerneldoc too. v3: - For paranoia, double check that minor->dev == dev in the release hook, because I botched the pointer math in the drmm library. - Call drm_mode_config_cleanup when drmm_add_action fails, we'd be missing some mutex_destroy and ida_cleanup otherwise (Laurent) v4: Add a drmm_add_action_or_reset (like devm_ has) to encapsulate this pattern (Noralf). v5: Fix oversight in the new drmm_add_action_or_reset macro (Noralf) v4: Review from Sam: - drmm_mode_config_init wrapper (also suggested by Thomas) - improve commit message, explain better why ->relase is deprecated v5: - Make drmm_ the main function, with the old one as compat wrapper (Sam) - Add FIXME comments to drm_mode_config_cleanup/init() that drivers shouldn't use these anymore. - Move drmm_add_action_or_reset helper to an earlier patch. Reviewed-by:
-
Daniel Vetter authored
It has become empty. Given the few users I figured not much point splitting this up. v2: Rebase over i915 changes. v3: Rebase over patch split fix. Acked-by:
-
Daniel Vetter authored
Nothing special here, except that this is the first time that we automatically clean up something that's initialized with an explicit driver call. But the cleanup was done at the very end of the release sequence for all drivers, and that's still the case. At least without more uses of drmm_ through explicit driver calls. Also for this one we need drmm_kcalloc, so lets add those. The motivation here is to allow us to remove the explicit calls to drm_dev_fini() from all drivers. v2: Sort includes (Laurent) v3: Motivate the change in the commit message better (Sam) Acked-by:
-
Daniel Vetter authored
We might want to look into pushing this down into drm_mm_init, but that would mean rolling out return codes to a pile of functions unfortunately. So let's leave that for now. Acked-by:
-
Daniel Vetter authored
The cleanup here is somewhat tricky, since we can't tell apart the allocated minor index from 0. So register a cleanup action first, and if the index allocation fails, unregister that cleanup action again to avoid bad mistakes. The kdev for the minor already handles NULL, so no problem there. Hence add drmm_remove_action() to the drm_managed library. v2: Make pointer math around void ** consistent with what Laurent suggested. v3: Use drmm_add_action_or_reset and remove drmm_remove_action. Noticed because of some questions from Thomas. This also means we need to move the drmm_add_action_or_reset helper earlier in the series. v4: Uh ... fix slightly embarrassing bug CI spotted. Acked-by:
-
Daniel Vetter authored
Well for the simple stuff at least, vblank, gem and minor cleanup I want to further split up as a demonstration. v2: We need to clear drm_device->dev otherwise the debug drm printing after our cleanup hook (e.g. in drm_manged_release) will chase released memory and result in a use-after-free. Not really pretty, but oh well. Reviewed-by:
-
Daniel Vetter authored
We need to add a drmm_kstrdup for this, but let's start somewhere. This is not exactly perfect onion unwinding, but it's jsut a kfree so doesn't really matter at all. Reviewed-by:
-
Daniel Vetter authored
A few things: - Update the example driver in the documentation. - We can drop the old kfree in drm_dev_release. - Add a WARN_ON check in drm_dev_register to make sure everyone calls drmm_add_final_kfree and there's no leaks. v2: Restore the full cleanup, I accidentally left some moved code behind when fixing the bisectability of the series. Acked-by:
-
Daniel Vetter authored
These are the leftover drivers that didn't have a ->release hook that needed to be updated. Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
