- 25 May, 2012 4 commits
-
-
Ben Widawsky authored
Wait request is poorly named IMO. After working with these functions for some time, I feel it's much clearer to name the functions more appropriately. Of course we must update the callers to use the new name as well. This leaves room within our namespace for a *real* wait request function at some point. Note to maintainer: this patch is optional. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by:
-
Ben Widawsky authored
The trace events adds whether or not the wait was blocking. Blocking in this case means to hold struct_mutex (ie. no new work can be submitted during the wait). The information is inherently racy. The blocking information is racy since mutex_is_locked doesn't check that the current thread holds the lock. The only other option would be to pass the boolean information of whether or not the class was blocking down through the stack which is less desirable. v2: Don't do a trace event per loop. (Chris) Only get blocking/non-blocking info (Chris) v3: updated comment in code as well as commit msg (Daniel) Add "(NB)" to trace information to remind us in 6 months (Ben) Signed-off-by:
-
Ben Widawsky authored
Insert a wait parameter in the code so we can possibly timeout on a seqno wait if need be. The code should be functionally the same as before because all the callers will continue to retry if an arbitrary timeout elapses. We'd like to have nanosecond granularity, but the only way to do this is with hrtimer, and that doesn't fit well with the needs of this code. v2: Fix rebase error (Chris) Return proper time even in wedged + signal case (Chris + Ben) Use timespec constructs (Ben) Didn't take Daniel's advice regarding the Frankenstein-ness of the function. I did try his advice, but in the end I liked the way the original code looked, better. v3: Make wakeups far less frequent for infinite waits (Chris) v4: Remove dummy_wait variable (Daniel) Use raw monotonic time instead of jiffies (made the code a bit cleaner) (Ben) Added a couple of warnings (Ben) v5: Remove warnings (Daniel) Use more accurate time diff for default case (Daniel) Bikeshed for setting the return timespec in timeout case (Daniel) s/jiffies/time in one of the comments Signed-off-by:
-
- 22 May, 2012 2 commits
-
-
Daniel Vetter authored
Unfortunately we can't abort a mode_set, but at least tell the user that something might have gone wrong when setting the sdvo input or output timing fails. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
-
Daniel Vetter authored
- kill intel_sdvo->input_dtd, it's only used as a temporary variable, we store the preferred input mode in the adjusted mode at mode_fixup time. - rename the function to make it clear what we want it to do (get the preferred mode) and say in a comment what it unfortunately does as a side-effect (set the new output timings). Reviewed-by:
-
- 21 May, 2012 6 commits
-
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Similar to g4x_dp_detect() we should probe the PORT_HOTPLUG_STATUS as to whether the connector is active prior to attempting to retrieve the EDID. Signed-off-by:
-
Chris Wilson authored
Note that gen3 is the only platform where we've got the bit definitions right, hence the workaround of disabling sdvo hotplug support on i945g/gm is not due to misdiagnosis of broken hotplug irq handling ... Signed-off-by:
-
Chris Wilson authored
The status bits corresponding to the interrupt enable bits are the "live" hotplug status bits, and reflect the current status of the port (high for a detected connection, low for a disconnect). The actual bits corresponding to the interrupt source are elsewhere. The actual event is then determined by a combination of the interrupt flag and the current live status (if the interrupt is active, but the current status is not, then we have detected a disconnect.) Signed-off-by:
-
Chris Wilson authored
Also as we set the HOTPLUG_EN to 0 during pre-install, we can simply set it during post-install, and nor do we wish to enable unwanted hotplug events. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-2012-05-20' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next Daniel wrote: The last pull I'd like to squeeze into 3.5, safe for the hsw stuff mostly bugfixes: - last few patches for basic hsw enabling (Eugeni, infoframe support by Paulo) - Fix up infoframe support, we've hopefully squashed all the cargo-culting in there (Paulo). Among all the issues, this finally fixes some of the infoframe regressions seen on g4x and snb systems. - Fixup sdvo infoframe support, this fixes a regression from 2.6.37. - Correctly enable semaphores on snb, we've enabled it already for 3.5, but the dmar check was slightly wrong. - gen6 irq fixlets from Chris. - disable gmbus on i830, the hw seems to be simply broken. - fix up the pch pll fallout (Chris & me). - for_each_ring macro from Chris - I've figured I'll merge this now to avoid backport pain. - complain when the rps state isn't what we expect (Chris). Note that this is shockingly easy to hit and hence pretty much will cause a regression report. But it only tells us that the gpu turbo state got out of whack, a problem we know off since a long time (it cause the gpu to get stuck a a fixed frequency, usually the lowest one). Chris is working on a fix, but we haven't yet found a magic formula that works perfectly (only patches that massively reduce the frequency of this happening). - MAINTAINERS patch, I'm now officially the guy to beat up." * tag 'drm-intel-next-2012-05-20' of git://people.freedesktop.org/~danvet/drm-intel: (57 commits) drm/i915: IBX has a fixed pch pll to pch pipe mapping drm/i915: implement hsw_write_infoframe drm/i915: small hdmi coding style cleanups drm/i915: fixup infoframe support for sdvo drm/i915: Enable the PCH PLL for all generations after link training drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN drm/i915: don't clobber the pipe param in sanitize_modesetting drm/i915: disable gmbus on i830 drm/i915: Replace the feature tests for BLT/BSD with ring init checks drm/i915: Check whether the ring is initialised prior to dispatch drm/i915: Introduce for_each_ring() macro drm/i915: Assert that the transcoder is indeed off before modifying it drm/i915: hook Haswell devices in place drm/i915: prepare HDMI link for Haswell drm/i915: move HDMI structs to shared location drm/i915: add WR PLL programming table drm/i915: add support for DDI-controlled digital outputs drm/i915: detect digital outputs on Haswell drm/i915: program iCLKIP on Lynx Point drm/i915: program WM_LINETIME on Haswell ...
-
- 20 May, 2012 5 commits
-
-
Daniel Vetter authored
This should fix breakage introduced in commit ee7b9f93 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Apr 20 17:11:53 2012 +0100 drm/i915: manage PCH PLLs separately from pipes v2: Add a DRM_DEBUG_KMS message to explain why a given pll was selected, suggested by Chris Wilson. v3: Actually run git add. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Paulo Zanoni authored
Both the control and data registers are completely different now. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
- Changed the coding style of auxiliary infoframe functions to make them smaller - Fixed the column alignment of some function definitions - Remove definition of "struct drm_crtc" in some places as they're used only to retrieve "struct intel_crtc" Signed-off-by:
-
Daniel Vetter authored
At least the worst offenders: - SDVO specifies that the encoder should compute the ecc. Testing also shows that we must not send the ecc field, so copy the dip_infoframe struct to a temporay place and avoid the ecc field. This way the avi infoframe is exactly 17 bytes long, which agrees with what the spec mandates as a minimal storage capacity (with the ecc field it would be 18 bytes). - Only 17 when sending the avi infoframe. The SDVO spec explicitly says that sending more data than what the device announces results in undefined behaviour. - Add __attribute__((packed)) to the avi and spd infoframes, for otherwise they're wrongly aligned. Noticed because the avi infoframe ended up being 18 bytes large instead of 17. We haven't noticed this yet because we don't use the uint16_t fields yet (which are the only ones that would be wrongly aligned). This regression has been introduce by 3c17fe4b is the first bad commit commit 3c17fe4b Author: David Härdeman <david@hardeman.nu> Date: Fri Sep 24 21:44:32 2010 +0200 i915: enable AVI infoframe for intel_hdmi.c [v4] Patch tested on my g33 with a sdvo hdmi adaptor. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732 Tested-by: Peter Ross <pross@xvid.org> (G35 SDVO-HDMI) Reviewed-by:
-
Dave Airlie authored
Reported-by:
Jiri Slaby <jslaby@suse.cz> Reported-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 19 May, 2012 23 commits
-
-
Chris Wilson authored
Hidden away within one chipset specific path was the necessary logic to turn on the PLL. This needs to be done everywhere in order for us to drive any display! As such as soon as we tested on a non-CougarPoint chipset, we failed to bring up any DisplayPorts and generated a nice set of assertion failures in the process. At least one part of our logic is working, the part that assumes that we have no idea what we are doing. Reported-by: guang.a.yang@intel.com References: https://bugs.freedesktop.org/show_bug.cgi?id=49712Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Chris Wilson authored
Turn a fatal lockup into a merely blank display with lots of shouty messages. v2: Whilst in the area, convert the other BUG_ON into less fatal errors. In particular, note that we may be called on a PCH platform not using PLLs, such as Haswell, and so we do not always want to BUG_ON(!pll) Signed-off-by:
-
Daniel Vetter authored
... we need it later on in the function to clean up pipe <-> plane associations. This regression has been introduced in commit f47166d2 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Mar 22 15:00:50 2012 +0000 drm/i915: Sanitize BIOS debugging bits from PIPECONF Spotted by staring at debug output of an (as it turns out) totally unrelated bug. v2: I've totally failed to do the s/pipe/i/ correctly, spotted by Chris Wilson. Reviewed-by:
-
Daniel Vetter authored
The hw just returns garbage. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49838Reported-and-tested-by:
Vladyslav <DFEW.Entwickler@googlemail.com> Acked-by:
-
Chris Wilson authored
When userspace asks whether the driver supports the BLT or BSD rings for this chip, simply report whether those particular rings are initialised v2: Use intel_ring_initialized() Signed-off-by:
-
Chris Wilson authored
Rather than use the magic feature tests HAS_BLT/HAS_BSD just check whether the ring we are about to dispatch the execbuffer on is initialised. v2: Use intel_ring_initialized() Signed-off-by:
-
Chris Wilson authored
In many places we wish to iterate over the rings associated with the GPU, so refactor them to use a common macro. Along the way, there are a few code removals that should be side-effect free and some rearrangement which should only have a cosmetic impact, such as error-state. Note that this slightly changes the semantics in the hangcheck code: We now always cycle through all enabled rings instead of short-circuiting the logic. v2: Pull in a couple of suggestions from Ben and Daniel for intel_ring_initialized() and not removing the warning (just moving them to a new home, closer to the error). Signed-off-by:
-
Chris Wilson authored
Inspired by a recent regression that seems to confuse pch transcoder state, let's be a bit more paranoid. References: https://bugs.freedesktop.org/show_bug.cgi?id=49712 Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Eugeni Dodonov authored
This patch enables i915 driver to handle Haswell devices. It should go in last, when things are working stable enough. Signed-off-by:
-
Eugeni Dodonov authored
On Haswell, we need to properly train the DDI buffers prior to enabling HDMI, and enable the required clocks with correct dividers for the desired frequency. Also, we cannot simple reuse HDMI routines from previous generations of GPU, as most of HDMI-specific stuff is being done via the DDI port programming instead of HDMI-specific registers. This commit take advantage of the WR PLL clock table which is in a separate (previous) commit to select the right divisors for each mode. Signed-off-by:
-
Eugeni Dodonov authored
Move intel_hdmi data structure and support functions to a shared location, to allow their usage from intel_ddi module. Reviewed-by:
-
Eugeni Dodonov authored
This table is used for programming WR PLL clocks, used by HDMI and DVI outputs. I split it into a separate patch to simplify the HDMI enabling patch which was getting huge. Note that this table is a temporary solution for WR PLL programming. It will be reworked into a more exact algorithm at a later stage. But for now, it provides the most accurate clock setting solution, so we use it here. Signed-off-by:
-
Eugeni Dodonov authored
Those are driven by DDIs on Haswell architecture, so we need to keep track of which DDI is being used on each output. Reviewed-by:
-
Eugeni Dodonov authored
Digital port detection on Haswell is indicated by the presence of a bit in DDI_BUF_CTL for port A, and by a different register for ports B, C and D. So we check for those bits during the initialization time and let the hdmi function know about those. Note that this bit does not indicates whether the output is DP or HDMI. However, the DDI buffers can be programmed in a way that is shared between DP/HDMI and FDI/HDMI except for PORT E. So for now, we detect those digital outputs as being HDMI, but proper DP support is still pending. Note that DDI A can only drive eDP, so we do not handle it here for hdmi initialization. v2: simplify Haswell handling logic v3: use generic function for handling digital outputs. Signed-off-by:
-
Eugeni Dodonov authored
The iCLKIP clock is used to drive the VGA pixel clock on the PCH. In order to do so, it must be programmed to properly do the clock ticks according to the divisor, phase direction, phase increments and a special auxiliary divisor for 20MHz clock. v2: calculate divisor values directly instead of relying on a table. v3: merged a fix from Ben to properly check for invalid divider values. Reviewed-by:
-
Eugeni Dodonov authored
The line time can be programmed according to the number of horizontal pixels vs effective pixel rate ratio. v2: improve comment as per Chris Wilson suggestion v3: incorporate latest changes in specs. v4: move into wm update routine, also mention that the same routine can program IPS watermarks. We do not have their enablement code yet, nor handle the required clock settings at the moment, so this patch won't program those values for now. Signed-off-by:
-
Eugeni Dodonov authored
For now, we simple reuse the Ivy Bridge routines here. Signed-off-by:
-
Eugeni Dodonov authored
Signed-off-by:
-
Eugeni Dodonov authored
Starting with Haswell, DDI ports can work in FDI mode to support connectivity with the outputs located on the PCH. This commit adds support for such connections in the intel_ddi module, and provides Haswell-specific functionality to make it work. v2: simplify the commit as per Daniel Vetter suggestion. Signed-off-by:
-
Eugeni Dodonov authored
DDI is introduced starting with Haswell GPU generation. So to simplify its management in the future, we also add intel_ddi.c to hold all the DDI-related items. Buffer translations for DDI links must be initialized prior to enablement. For FDI and DP, first 9 pairs of values are used to select the connection parameters. HDMI uses the last pair of values and ignores the first 9 pairs. So we program HDMI values in both cases, which allows HDMI to work over both FDI and DP-friendly buffers. Reviewed-by:
-
Eugeni Dodonov authored
On Haswell, only one pipe can work in FDI mode, so this patch prevents messing with wrong registers when FDI is being used by non-first pipe. And to prevent this, we also specify that the VGA can only be used on pipe 0 for now in the crtc_mask value. Reviewed-by:
-
Eugeni Dodonov authored
Prevent bogus asserts on DDI-related paths. Longer explanation from Eugeni by mail: "For the asserts there are 3 paths where we hit them: - in assert_fdi_tx (we don't have the FDI_TX_CTL anymore, backup plan DDI_FUNC_CTL is used instead) - in assert_fdi_tx_pll_enabled (we have the combination of iCLKIP and DDI_FUNC_CTL, plus PORT_CLK_SEL and PIPE_CLK_SEL now to make things work). We could use an assert here indeed - if we configure port to use one clock, and pipe to use another, everything hangs. Right now, we configure all of them in one place only; but yes, when DP code lands it will get more funky. - and in ironlake_fdi_pll_enable. I reuse part of this function (to configure the TU sizes), but as in the 1st case, FDI_TX_CTL is gone so I just ignore it here." Signed-off-by:
-
Eugeni Dodonov authored
Avoid bogus asserts and PCH PLL accesses on Lynx Point. Signed-off-by:
-
