- 31 Jul, 2020 4 commits
-
-
Paul Cercueil authored
The fw_passed_dtb is now properly initialized even when CONFIG_BUILTIN_DTB is used, so there's no need to handle it in any particular way here. Note that the behaviour is slightly different, as the previous code used the built-in Device Tree unconditionally, while now the built-in Device Tree is only used when the bootloader did not provide one. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Paul Cercueil authored
Init the 'fw_passed_dtb' pointer to the buit-in Device Tree blob when it has been compiled in with CONFIG_BUILTIN_DTB. Signed-off-by:
-
Nicolas Saenz Julienne authored
bus->count_cells() parses cells starting from the node's parent. This is not good enough for parser_init() which is generally parsing a bus node. Revert to previous behavior using of_bus_n_*_cells(). Fixes: 2f96593e ("of_address: Add bus type match for pci ranges parser") Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jiaxun Yang authored
After 2f96593e ("of_address: Add bus type match for pci ranges parser"), the last user of of_bus_pci_get_flags when CONFIG_PCI is disabled had gone. This caused unused function warning when compiling without CONFIG_PCI. Fix by guarding it with CONFIG_PCI. Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 2f96593e ("of_address: Add bus type match for pci ranges parser") Acked-by:
-
- 30 Jul, 2020 1 commit
-
-
Huacai Chen authored
HT irqs vectors are 8 groups, each group has 32 irqs, Loongson64C CPUs can use only 4 groups and Loongson64G CPUs can use all 8 groups. So the number of msi vectors of Loongson64G is 192 (32*8 - 64 = 192). Fixes: 24af1059 ("MIPS: Loongson64: DeviceTree for LS7A PCH") Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
- 28 Jul, 2020 11 commits
-
-
Jiaxun Yang authored
Although currently we're not enabling any ISA device in devicetree, but this node is required to express the ranges of address reserved for ISA. Signed-off-by:
-
Jiaxun Yang authored
Ranges should express the actual physical address on bus. Also enlarge the PCI I/O size to the actual hardware limit. Signed-off-by:
-
Jiaxun Yang authored
It can be very big on LS7A PCH systems. Signed-off-by:
-
Jiaxun Yang authored
Previously, we're hardcoding reserved ISA I/O Space in, now we're processing it I/O via DeviceTree directly. The ranges property if ISA node is used to determine the size and address of reserved I/O space. Signed-off-by:
-
Jiaxun Yang authored
So the parser can be used to parse range property of ISA bus. As they're all using PCI-like method of range property, there is no need start a new parser. Signed-off-by:
-
Krzysztof Kozlowski authored
Enabling the JZ4780_NEMC driver makes sense only for specific hardware - the Ingenic SoC architecture. It is not an essential driver for the SoC support so do not enable it by default. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The CONFIG_JZ4780_NEMC was previously a default on MIPS but now it has to be enabled manually. Signed-off-by:
-
Paul Cercueil authored
The ROUT (right channel output of audio codec) was connected to INL (left channel of audio amplifier) instead of INR (right channel of audio amplifier). Fixes: 8ddebad1 ("MIPS: qi_lb60: Migrate to devicetree") Cc: stable@vger.kernel.org # v5.3 Signed-off-by:
-
Paul Cercueil authored
The CONFIG_MIPS_MACHINE option is dead code that hasn't been used in years. The Kconfig option is not selected anywhere, and the <asm/mips_machine.h> is not included anywhere either. To make things worse, for years it co-existed with a separate MIPS machine implementation as <asm/machine.h>. The two defined the 'mips_machine' structure with different fields, and the 'MIPS_MACHINE' macro with different parameters. The two used the same memory area (defined by the linker script) to store data, and you could totally use the two at the same time for all kinds of funny results. Signed-off-by:
-
Paul Cercueil authored
Since commit 3a77e0d7 ("MIPS: ath79: drop machfiles"), this header is not used anymore. Signed-off-by:
-
Thomas Bogendoerfer authored
Clean up cpu-feature-overrides, which only repeat the default. Signed-off-by:
-
- 26 Jul, 2020 9 commits
-
-
Jinyang He authored
Use 0 as the align parameter in memblock_find_in_range() is incorrect when we reserve memory for Crash kernel. The environment as follows: [ 0.000000] MIPS: machine is loongson,loongson64c-4core-rs780e ... [ 1.951016] crashkernel=64M@128M The warning as follows: [ 0.000000] Invalid memory region reserved for crash kernel And the iomem as follows: 00200000-0effffff : System RAM 04000000-0484009f : Kernel code 048400a0-04ad7fff : Kernel data 04b40000-05c4c6bf : Kernel bss 1a000000-1bffffff : pci@1a000000 ... The align parameter may be finally used by round_down() or round_up(). Like the following call tree: mips-next: mm/memblock.c memblock_find_in_range └── memblock_find_in_range_node ├── __memblock_find_range_bottom_up │ └── round_up └── __memblock_find_range_top_down └── round_down \#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1) \#define round_down(x, y) ((x) & ~__round_mask(x, y)) \#define __round_mask(x, y) ((__typeof__(x))((y)-1)) The round_down(or round_up)'s second parameter must be a power of 2. If the second parameter is 0, it both will return 0. Use 1 as the parameter to fix the bug and the iomem as follows: 00200000-0effffff : System RAM 04000000-0484009f : Kernel code 048400a0-04ad7fff : Kernel data 04b40000-05c4c6bf : Kernel bss 08000000-0bffffff : Crash kernel 1a000000-1bffffff : pci@1a000000 ... Signed-off-by:Jinyang He <hejinyang@loongson.cn> Reviewed-by:
-
Huacai Chen authored
Now CPU#0 is not hotpluggable on MIPS, so prevent to create /sys/devices /system/cpu/cpu0/online which confuses some user-space tools. Cc: stable@vger.kernel.org Signed-off-by:
-
Paul Cercueil authored
Add a devicetree node for the Image Processing Unit (IPU) found in the JZ4725B. Connect it with graph nodes to the LCD node. The LCD driver will expect the IPU node to be accessed through graph port #8, as stated in the bindings documentation. Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "as". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Randy Dunlap authored
Delete the repeated words "Returns" and convert to kernel-doc notation by adding a ':'. Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "command". Delete the repeated words "returns" and convert to kernel-doc notation by adding a ':'. Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "the". Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "Returns". Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "on". Signed-off-by:
-
- 24 Jul, 2020 5 commits
-
-
Jiri Slaby authored
It references __initdata and is called only from an __init function: trap_init. This avoids section mismatches (which I am seeing with gcc 10). Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Álvaro Fernández Rojas authored
There are some CFE variants that start with 'cfe-vd' instead of 'cfe-v', such as the one used in the Huawei HG556a: "cfe-vd081.5003". In this case, the CFE version is stored as is (string vs number bytes). Some newer devices have an additional version number, such as the Comtrend VR-3032u: "1.0.38-112.118-11". Finally, print the string as is if the version doesn't start with "cfe-v" or "cfe-vd", but starts with "cfe-". Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
1.Add "PRID_COMP_INGENIC_13" and "PRID_IMP_XBURST2" for X2000. 2.Add X2000 system type for cat /proc/cpuinfo to give out X2000. Signed-off-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by:
-
Yu Kuai authored
if of_find_device_by_node() succeed, dwc3_octeon_device_init() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: 93e502b3 ("MIPS: OCTEON: Platform support for OCTEON III USB controller") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
-
Jiaxun Yang authored
paravirt machine was introduced for Cavium's partial virtualization technology, however, it's host side support and QEMU support never landed in upstream. As Cavium was acquired by Marvel and they have no intention to maintain their MIPS product line, also paravirt is unlikely to be utilized by community users, it's time to retire it if nobody steps in to maintain it. Signed-off-by:
-
- 21 Jul, 2020 6 commits
-
-
Serge Semin authored
Add Thomas and myself as maintainers of the MIPS CPU and GIC IRQchip, MIPS GIC timer and MIPS CPS CPUidle drivers. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Serge Semin authored
CDMM may be available not only on MIPS R2 architectures, but also on newer MIPS R5 chips. For instance our P5600 chip has one. Let's mark the CDMM bus being supported for that MIPS arch too. Signed-off-by:
-
Serge Semin authored
Since having and mapping the CDMM block is platform specific, then instead of just returning a zero-address, lets make the default CDMM base address search method (mips_cdmm_phys_base()) to do something useful. For instance to find the address in a dedicated dtb-node in order to support of-based platforms by default. Signed-off-by:
-
Serge Semin authored
It's a Common Device Memory Map controller embedded into the MIPS IP cores, which dts node is supposed to have compatible and reg properties. Signed-off-by:
-
Serge Semin authored
Modern device tree bindings are supposed to be created as YAML-files in accordance with DT schema. This commit replaces MIPS GIC legacy bare text binding with YAML file. As before the binding file states that the corresponding dts node is supposed to be compatible with MIPS Global Interrupt Controller indicated by the "mti,gic" compatible string and to provide a mandatory interrupt-controller and '#interrupt-cells' properties. There might be optional registers memory range, "mti,reserved-cpu-vectors" and "mti,reserved-ipi-vectors" properties specified. MIPS GIC also includes a free-running global timer, per-CPU count/compare timers, and a watchdog. Since currently the GIC Timer is only supported the DT schema expects an IRQ and clock-phandler charged timer sub-node with "mti,mips-gic-timer" compatible string. Signed-off-by:
-
Serge Semin authored
It's a Cluster Power Controller embedded into the MIPS IP cores. Currently the corresponding dts node is supposed to have compatible and reg properties. Signed-off-by:
-
- 16 Jul, 2020 4 commits
-
-
Tiezhu Yang authored
In the MIPS architecture, we should clear the security-relevant flag READ_IMPLIES_EXEC in the function SET_PERSONALITY2() of the file arch/mips/include/asm/elf.h. Otherwise, with this flag set, PROT_READ implies PROT_EXEC for mmap to make memory executable that is not safe, because this condition allows an attacker to simply jump to and execute bytes that are considered to be just data [1]. In mm/mmap.c: unsigned long do_mmap(struct file *file, unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, vm_flags_t vm_flags, unsigned long pgoff, unsigned long *populate, struct list_head *uf) { [...] if ((prot & PROT_READ) && (current->personality & READ_IMPLIES_EXEC)) if (!(file && path_noexec(&file->f_path))) prot |= PROT_EXEC; [...] } By the way, x86 and ARM64 have done the similar thing. After commit 250c2277 ("x86_64: move kernel"), in the file arch/x86/kernel/process_64.c: void set_personality_64bit(void) { [...] current->personality &= ~READ_IMPLIES_EXEC; } After commit 48f99c8e ("arm64: Preventing READ_IMPLIES_EXEC propagation"), in the file arch/arm64/include/asm/elf.h: #define SET_PERSONALITY(ex) \ ({ \ clear_thread_flag(TIF_32BIT); \ current->personality &= ~READ_IMPLIES_EXEC; \ }) [1] https://insights.sei.cmu.edu/cert/2014/02/feeling-insecure-blame-your-parent.htmlReported-by:Juxin Gao <gaojuxin@loongson.cn> Co-developed-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Peng Fan authored
Close "fd" before the return of map_vdso() and close "out_file" in main(). Signed-off-by:
Peng Fan <fanpeng@loongson.cn> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Refresh CU1000-Neo's defconfig to support LED. Tested-by:
周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
1.The CU1000-Neo board actually uses X1000E instead of X1000, so the wrongly written "ingenic,x1000" in compatible should be changed to "ingenic,x1000e". 2.Adjust the order of nodes according to the corresponding address value. 3.Drop unnecessary node in "wlan_pwrseq". 4.Add the leds node to "cu1000-neo.dts". Tested-by:
-
