- 02 May, 2016 5 commits
-
-
Noralf Trønnes authored
This adds fbdev deferred io support if CONFIG_FB_DEFERRED_IO is enabled. The driver has to provide a (struct drm_framebuffer_funcs *)->dirty() callback to get notification of fbdev framebuffer changes. If the dirty() hook is set, then fb_deferred_io is set up automatically by the helper. Two functions have been added so that the driver can provide a dirty() function: - drm_fbdev_cma_init_with_funcs() This makes it possible for the driver to provided a custom (struct drm_fb_helper_funcs *)->fb_probe() function. - drm_fbdev_cma_create_with_funcs() This is used by the .fb_probe hook to set a driver provided (struct drm_framebuffer_funcs *)->dirty() function. Cc: laurent.pinchart@ideasonboard.com Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-6-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
Export fb_deferred_io_mmap so drivers can change vma->vm_page_prot. When the framebuffer memory is allocated using dma_alloc_writecombine() instead of vmalloc(), I get cache syncing problems on ARM. This solves it: static int drm_fbdev_cma_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma) { fb_deferred_io_mmap(info, vma); vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); return 0; } Could this have been done in the core? Drivers that don't set (struct fb_ops *)->fb_mmap, gets a call to fb_pgprotect() at the end of the default fb_mmap implementation (drivers/video/fbdev/core/fbmem.c). This is an architecture specific function that on many platforms uses pgprot_writecombine(), but not on all. And looking at some of the fb_mmap implementations, some of them sets vm_page_prot to nocache for instance, so I think the safest bet is to do this in the driver and not in the fbdev core. And we can't call fb_pgprotect() from fb_deferred_io_mmap() either because we don't have access to the file pointer that powerpc needs. Signed-off-by:Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Noralf Trønnes authored
This adds deferred io support to drm_fb_helper. The fbdev framebuffer changes are flushed using the callback (struct drm_framebuffer *)->funcs->dirty() by a dedicated worker ensuring that it always runs in process context. For those wondering why we need to be able to handle atomic calling contexts: Both panic paths and cursor code and fbcon blanking can run from atomic. See commit bcb39af4 Author: Dave Airlie <airlied@redhat.com> Date: Thu Feb 7 11:19:15 2013 +1000 drm/udl: make usage as a console safer for where this was originally discovered. Signed-off-by:
-
Noralf Trønnes authored
Now that drm_fb_helper gets deferred io support, the drm_fb_helper_sys_{fillrect,copyarea,imageblit} functions will schedule a worker that will call the (struct drm_framebuffer *)->funcs->dirty() function. This will break this driver so use the sys_{fillrect,copyarea,imageblit} functions directly. Signed-off-by: -
Noralf Trønnes authored
Now that drm_fb_helper gets deferred io support, the drm_fb_helper_sys_{fillrect,copyarea,imageblit} functions will schedule a worker that will call the (struct drm_framebuffer *)->funcs->dirty() function. This will break this driver so use the sys_{fillrect,copyarea,imageblit} functions directly. Signed-off-by:
-
- 28 Apr, 2016 4 commits
-
-
Thierry Reding authored
Some of the functions implemented are flagged as not having a prototype defined when building with W=1. Include the header to avoid these build warnings. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Ville Syrjälä authored
Let's be nice and interrupt the dpcd aux-dev reads/writes when there's a signal pending. Much nicer if the user can hit ^C instead of having to sit around waiting for the read/write to finish. time dd if=/dev/drm_dp_aux0 bs=$((1024*1024)) ^C before: real 0m34.681s user 0m0.003s sys 0m6.880s after: real 0m0.222s user 0m0.006s sys 0m0.057s Cc: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
The debug logging here can be very verbose in the kernel logs and provides no information which userspace doesn't have the access to already. Turn it off so kernel logs become more manageable. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Tvrtko Ursulin authored
Debug logging in this function does not provide any information apart that the userspace is calling an ioctl on the connector. There is not any info on the connector provided at all and since there are other ioctls userspace typically calls which do log useful things about the same connectors, remove this one to make things a little bit more readable when KMS debugging is turned on. Signed-off-by:
-
- 27 Apr, 2016 8 commits
-
-
Daniel Vetter authored
amdgpu gained dev->struct_mutex usage, and that's because it's walking the dev->filelist list. Protect that list with it's own lock to take one more step towards getting rid of struct_mutex usage in drivers once and for all. While doing the conversion I noticed that 2 debugfs files in i915 completely lacked appropriate locking. Fix that up too. v2: don't forget to switch to drm_gem_object_unreference_unlocked. Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-9-git-send-email-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
It's only used for legacy mmaping support now. Reviewed-by:
-
Daniel Vetter authored
And again make sure it's a no-op for modern drivers. Another case of dev->struct_mutex gone for modern drivers! Note that the entirety of the legacy addmap interface is now protected by DRIVER_MODESET. Note that just auditing kernel code is not enough, since userspace loves to set up legacy maps on it's own for various things - with ums userspace and kernel space share control over resources. v2: Also add a DRIVER_* check like for all other maps functions to really short-circuit the code. And give drm_legacy_rmmap used by the dev unregister code the same treatment. v3: - remove redundant return; (Alex, Chris) - don't special case nouveau with DRIVER_KMS_LEGACY_CONTEXT. v4: Again special case nouveau. The problem is not directly in the ddx, but that it calls dri1 functions from the X server. And those do call drmAddMap. Fixed only in commit b1a630b48210d6a3c44994fce1b73273000ace5c Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 7 14:45:14 2012 +1000 nouveau: drop DRI1 device open interface. Acked-by: -
Daniel Vetter authored
Like in commit 0e975980 Author: Peter Antoine <peter.antoine@intel.com> Date: Tue Jun 23 08:18:49 2015 +0100 drm: Turn off Legacy Context Functions we need to again make an exception for nouveau, but everyone else really doesn't need this. Dave Airlie dug out again why we need this: The problem is the legacy dri1 open function the nouveau ddx called, and the problematic code is actually in the X server itself. It was only fixed in commit b1a630b48210d6a3c44994fce1b73273000ace5c Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 7 14:45:14 2012 +1000 nouveau: drop DRI1 device open interface. Cc: Peter Antoine <peter.antoine@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Acked-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Daniel Vetter authored
Only two drivers implement this hook. vmwgfx (which doesn't need it really) and legacy radeon (which since v1 has been nuked, yay). v1: Rebase over radeon ums removal. Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by:
-
Daniel Vetter authored
It belongs right next to the addmap and rmmap functions really. And for OCD consistency name it drm_legacy_getmap_ioctl. Reviewed-by:
-
Daniel Vetter authored
Except for the ->lasclose driver callback evrything in drm_lastclose() is all legacy cruft and can be hidden. Which means another dev->struct_mutex site disappears entirely for modern drivers! Also while at it change the return value of drm_lastclose to void since it will always succeed. No one checks the return value of close() anyway, ever. v2: Move misplaced hunk, spotted by 0day. Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by:
-
Daniel Vetter authored
It has a DRIVER_MODESET check to sure make it's not creating havoc for drm drivers. Make that clear in the name too. v2: Move misplaced hunk, spotted by 0day and Thierry. Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by:
-
- 26 Apr, 2016 1 commit
-
-
Daniel Vetter authored
For documentation and paranoia. Acked-by:
-
- 25 Apr, 2016 1 commit
-
-
Emil Velikov authored
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Acked-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
- 22 Apr, 2016 16 commits
-
-
Laurent Pinchart authored
Commit d63c25e4 ("drm: rcar-du: Use generic drm_connector_register_all() helper") left an unused local variable behind. Remove it. Fixes: d63c25e4 ("drm: rcar-du: Use generic drm_connector_register_all() helper") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Lyude authored
Since we've fixed up drm_dp_dpcd_read() to allow for retries when things timeout, there's no use for having this function anymore. Good riddens. Signed-off-by:
Lyude <cpaul@redhat.com> Tested-by:
-
Lyude authored
This is part of a patch series to migrate all of the workarounds for commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's DP helper. Some sinks will just return garbage for the first aux tranaction they receive when coming out of sleep mode, so we need to perform an additional read before the actual read to workaround this. Changes since v5 - If the throwaway read in drm_dp_dpcd_read() fails, return the error from that instead of continuing. This follows the same logic we do in drm_dp_dpcd_access() (e.g. the error from the first transaction may differ from the errors that proceeding attempts might return). Signed-off-by:
-
Lyude authored
This is part of a patch series to migrate all of the workarounds for commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's DP helper. We cannot rely on sinks NACKing or deferring when they can't receive transactions, nor can we rely on any other sort of consistent error to know when we should stop retrying. As such, we need to just retry unconditionally on errors. We also make sure here to return the error we encountered during the first transaction, since it's possible that retrying the transaction might return a different error then we had originally. This, along with the previous patch, work around a weird bug with the ThinkPad T560's and it's dock. When resuming the laptop, it appears that there's a short period of time where we're unable to complete any aux transactions, as they all immediately timeout. The only machine I'm able to reproduce this on is the T560 as other production Skylake models seem to be fine. The period during which AUX transactions fail appears to be around 22ms long. AFAIK, the dock for the T560 never actually turns off, the only difference is that it's in SST mode at the start of the resume process, so it's unclear as to why it would need so much time to come back up. There's been a discussion on this issue going on for a while on the intel-gfx mailing list about this that has, in addition to including developers from Intel, also had the correspondence of one of the hardware engineers for Intel: http://www.spinics.net/lists/intel-gfx/msg88831.html http://www.spinics.net/lists/intel-gfx/msg88410.html We've already looked into a couple of possible explanations for the problem: - Calling intel_dp_mst_resume() before right fix. intel_runtime_pm_enable_interrupts(). This was the first fix I tried, and while it worked it definitely wasn't the right fix. This worked because DP aux transactions don't actually require interrupts to work: static uint32_t intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg; uint32_t status; bool done; #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) if (has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, msecs_to_jiffies_timeout(10)); else done = wait_for_atomic(C, 10) == 0; if (!done) DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", has_aux_irq); #undef C return status; } When there's no interrupts enabled, we end up timing out on the wait_event_timeout() call, which causes us to check the DP status register once to see if the transaction was successful or not. Since this adds a 10ms delay to each aux transaction, it ends up adding a long enough delay to the resume process for aux transactions to become functional again. This gave us the illusion that enabling interrupts had something to do with making things work again, and put me on the wrong track for a while. - Interrupts occurring when we try to perform the aux transactions required to put the dock back into MST mode. This isn't the problem, as the only interrupts I've observed that come during this timeout period are from the snd_hda_intel driver, and disabling that driver doesn't appear to change the behavior at all. - Skylake's PSR block causing issues by performing aux transactions while we try to bring the dock out of MST mode. Disabling PSR through i915's command line options doesn't seem to change the behavior either, nor does preventing the DMC firmware from being loaded. Since this investigation went on for about 2 weeks, we decided it would be better for the time being to just workaround this issue by making sure AUX transactions wait a short period of time before retrying. Signed-off-by:
-
Lyude authored
This is part of a patch series to migrate all of the workarounds for commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's DP helper. Some sinks need some time during the process of resuming the system from sleep before they're ready to handle transactions. While it would be nice if they responded with NACKs in these scenarios, this isn't always the case as a few sinks will just timeout on all of the transactions they receive until they're ready. Signed-off-by:
-
Dave Airlie authored
Since ref counting is in the object now we can just call the normal interfaces. Reviewed-by:
-
Dave Airlie authored
This reduces the fb_lock to just protecting the num_fb/fb_list. "Previously fb refcounting, and especially the weak reference (kref_get_unless_zero) used in fb lookups have been protected by fb_lock. But with the refactoring to share refcounting in the drm_mode_object base class that switched to being protected by idr_mutex, which means fb_lock critical sections can be reduced." Reviewed-by:
-
Dave Airlie authored
When we lookup an ref counted object we now take a proper reference using kref_get_unless_zero. Framebuffer lookup no longer needs do this itself. Convert rmfb to using framebuffer lookup and deal with the fact it now gets an extra reference that we have to cleanup. This should mean we can avoid holding fb_lock across rmfb. (if I'm wrong let me know). We also now only hold the fbs_lock around the list manipulation. "Previously fb refcounting, and especially the weak reference (kref_get_unless_zero) used in fb lookups have been protected by fb_lock. But with the refactoring to share refcounting in the drm_mode_object base class that switched to being protected by idr_mutex, which means fb_lock critical sections can be reduced." Reviewed-by:
-
Dave Airlie authored
No need to hold the lock while assigning the variable. Daniel wrote: "Not sure why exactly I put that under the lock, but the only thing that can race here is rmfb while addfb2 is still doing it's thing, with a correctly guess (easy to do since they're fully deterministic) fb_id." Reviewed-by:
-
Dave Airlie authored
We don't need to hold the fb lock around the initialisation, only around the list manipulaton. So do the lock hold only around the register for now. From Daniel: Previously fb refcounting, and especially the weak reference (kref_get_unless_zero) used in fb lookups have been protected by fb_lock. But with the refactoring to share refcounting in the drm_mode_object base class that switched to being protected by idr_mutex, which means fb_lock critical sections can be reduced. Reviewed-by:
-
Dave Airlie authored
No point have this code dupliated at this point, use the _object_find code instead now. Signed-off-by:
-
Dave Airlie authored
This is the initial code to add references to some mode objects. In the future we need to start reference counting connectors so firstly I want to reorganise the code so the framebuffer ref counting uses the same paths. This patch shouldn't change any functionality, just moves the kref. [airlied: move kerneldoc as well] Reviewed-by:
-
Dave Airlie authored
Avoids drivers knowing where the kref is stored. [airlied: add kerneldoc] Reviewed-by:
-
Dave Airlie authored
Just use the generic function. The main side effect of this is that the fb->base.id is now protected by the idr mutex as well. Reviewed-by:
-
Dave Airlie authored
A later patch will use it in framebuffer_init, and I want to keep the diff cleaner. Acked-by:
-
Dave Airlie authored
This changes the code to handle being called multiple times without side effects. The new names seems more suitable for what it does. Reviewed-by:
-
- 21 Apr, 2016 5 commits
-
-
https://github.com/bbrezillon/linux-at91Dave Airlie authored
This PR contains several improvement and cleanup patches for the atmel-hlcdc driver to be applied on drm-next (targeting 4.7). * 'drm-atmel-hlcdc-devel' of https://github.com/bbrezillon/linux-at91: drm: atmel-hlcdc: route DMA accesses through AHB interfaces drm: atmel-hlcdc: check display mode validity in crtc->mode_fixup() drm: atmel-hlcdc: rework the output code to support drm bridges drm: atmel-hlcdc: move output mode selection in CRTC implementation drm: atmel-hlcdc: support extended timing ranges on sama5d4 and sama5d2 drm: atmel-hlcdc: remove leftovers from atomic mode setting migration drm: atmel-hlcdc: fix connector and encoder types drm: atmel-hlcdc: support asynchronous atomic commit operations drm: atmel-hlcdc: add a ->cleanup_fb() operation
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
- make modeset hw state checker atomic aware (Maarten) - close races in gpu stuck detection/seqno reading (Chris) - tons&tons of small improvements from Chris Wilson all over the gem code - more dsi/bxt work from Ramalingam&Jani - macro polish from Joonas - guc fw loading fixes (Arun&Dave) - vmap notifier (acked by Andrew) + i915 support by Chris Wilson - create bottom half for execlist irq processing (Chris Wilson) - vlv/chv pll cleanup (Ville) - rework DP detection, especially sink detection (Shubhangi Shrivastava) - make color manager support fully atomic (Maarten) - avoid livelock on chv in execlist irq handler (Chris) * tag 'drm-intel-next-2016-04-11' of git://anongit.freedesktop.org/drm-intel: (82 commits) drm/i915: Update DRIVER_DATE to 20160411 drm/i915: Avoid allocating a vmap arena for a single page drm,i915: Introduce drm_malloc_gfp() drm/i915/shrinker: Restrict vmap purge to objects with vmaps drm/i915: Refactor duplicate object vmap functions drm/i915: Consolidate common error handling in intel_pin_and_map_ringbuffer_obj drm/i915/dmabuf: Tighten struct_mutex for unmap_dma_buf drm/i915: implement WaClearTdlStateAckDirtyBits drm/i915/bxt: Reversed polarity of PORT_PLL_REF_SEL bit drm/i915: Rename hw state checker to hw state verifier. drm/i915: Move modeset state verifier calls. drm/i915: Make modeset state verifier take crtc as argument. drm/i915: Replace manual barrier() with READ_ONCE() in HWS accessor drm/i915: Use simplest form for flushing the single cacheline in the HWS drm/i915: Harden detection of missed interrupts drm/i915: Separate out the seqno-barrier from engine->get_seqno drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+ drm/i915: Fixup the free space logic in ring_prepare drm/i915: Simplify check for idleness in hangcheck drm/i915: Apply a mb between emitting the request and hangcheck ...
-
Dave Airlie authored
Backmerge 4.6-rc3 for i915. Linux 4.6-rc3
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
misc pull req all over. Biggest thing is the drm_connector_(un)register_all cleanup from Alexey for drivers without the load/unload midlayer hooks. I.e. all the new ones, and a bunch of the pending new atomic drivers depend upon this. Or at least I asked them to rebase ;-) * tag 'topic/drm-misc-2016-04-21' of git://anongit.freedesktop.org/drm-intel: drm: Make drm.debug parameter description more helpful drm: Remove warning from drm_connector_unregister_all() drm: probe_helper: Hide ugly ifdef drm: rcar-du: Use generic drm_connector_register_all() helper drm: atmel_hldc: Use generic drm_connector_register_all() helper drm: Introduce drm_connector_register_all() helper drm: fix lut value extraction function drm/atomic-helper: Print an error if vblank wait times out drm/dp/mst: Restore primary hub guid on resume drm: Release driver references to handle before making it available again drm/i915/dp/mst: Add source port info to debugfs output drm/dp/mst: Enhance DP MST debugfs output drm/edid: Add drm_edid_get_monitor_name() include/drm: Reword debug categories comment. drm/crtc_helper: Reset empty plane state in drm_helper_crtc_mode_set_base() drm/virtio: Drop dummy gamma table support drm/bochs: Drop fake gamma support drm/core: Fix ordering in drm_mode_config_cleanup.
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
struct_mutex cleanups and error paths fixes. Unfortunately I didn't manage to get acks from everyone, but this stuff has been hanging out for months now and imo simple enough to just land the remaining few patches. But separate pull request so that you can take a look yourself. * tag 'topic/struct_mutex-2016-04-21' of git://anongit.freedesktop.org/drm-intel: drm/vma_manage: Drop has_offset drm/vgem: Drop dev->struct_mutex drm/vgem: Move get_pages to gem_create drm/vgem: Simplify dumb_map drm/exynos: drop struct_mutex from fbdev setup drm/exynos: drop struct_mutex from exynos_drm_gem_get_ioctl drm/exynos: drop struct_mutex from exynos_gem_map_sgt_with_dma drm/exynos: Drop dev->struct_mutex from mmap offset function drm/nouveau: Drop dev->struct_mutex from fbdev init drm/qxl: Use unlocked gem unreferencing drm/omapdrm: Use unlocked gem unreferencing drm/nouveau: Use unlocked gem unreferencing
-
