- 04 Aug, 2022 5 commits
-
-
NeilBrown authored
nfsd_lookup() takes an exclusive lock on the parent inode, but no callers want the lock and it may not be needed at all if the result is in the dcache. Change nfsd_lookup_dentry() to not take the lock, and call lookup_one_len_locked() which takes lock only if needed. nfsd4_open() currently expects the lock to still be held, but that isn't necessary as nfsd_validate_delegated_dentry() provides required guarantees without the lock. NOTE: NFSv4 requires directory changeinfo for OPEN even when a create wasn't requested and no change happened. Now that nfsd_lookup() doesn't use fh_lock(), we need to explicitly fill the attributes when no create happens. A new fh_fill_both_attrs() is provided for that task. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com>
-
NeilBrown authored
On non-error paths, nfsd_link() calls fh_unlock() twice. This is safe because fh_unlock() records that the unlock has been done and doesn't repeat it. However it makes the code a little confusing and interferes with changes that are planned for directory locking. So rearrange the code to ensure fh_unlock() is called exactly once if fh_lock() was called. Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
NeilBrown authored
Some error paths in nfsd_unlink() allow it to exit without unlocking the directory. This is not a problem in practice as the directory will be locked with an fh_put(), but it is untidy and potentially confusing. This allows us to remove all the fh_unlock() calls that are immediately after nfsd_unlink() calls. Reviewed-by:
-
NeilBrown authored
nfsd_create() usually returns with the directory still locked. nfsd_symlink() usually returns with it unlocked. This is clumsy. Until recently nfsd_create() needed to keep the directory locked until ACLs and security label had been set. These are now set inside nfsd_create() (in nfsd_setattr()) so this need is gone. So change nfsd_create() and nfsd_symlink() to always unlock, and remove any fh_unlock() calls that follow calls to these functions. Signed-off-by:
-
NeilBrown authored
pacl and dpacl pointers are added to struct nfsd_attrs, which requires that we have an nfsd_attrs_free() function to free them. Those nfsv4 functions that can set ACLs now set up these pointers based on the passed in NFSv4 ACL. nfsd_setattr() sets the acls as appropriate. Errors are handled as with security labels. Signed-off-by:
-
- 30 Jul, 2022 35 commits
-
-
NeilBrown authored
nfsd_setattr() now sets a security label if provided, and nfsv4 provides it in the 'open' and 'create' paths and the 'setattr' path. If setting the label failed (including because the kernel doesn't support labels), an error field in 'struct nfsd_attrs' is set, and the caller can respond. The open/create callers clear FATTR4_WORD2_SECURITY_LABEL in the returned attr set in this case. The setattr caller returns the error. Signed-off-by:
-
NeilBrown authored
The NFS protocol includes attributes when creating symlinks. Linux does store attributes for symlinks and allows them to be set, though they are not used for permission checking. NFSD currently doesn't set standard (struct iattr) attributes when creating symlinks, but for NFSv4 it does set ACLs and security labels. This is inconsistent. To improve consistency, pass the provided attributes into nfsd_symlink() and call nfsd_create_setattr() to set them. NOTE: this results in a behaviour change for all NFS versions when the client sends non-default attributes with a SYMLINK request. With the Linux client, the only attributes are: attr.ia_mode = S_IFLNK | S_IRWXUGO; attr.ia_valid = ATTR_MODE; so the final outcome will be unchanged. Other clients might sent different attributes, and if they did they probably expect them to be honoured. We ignore any error from nfsd_create_setattr(). It isn't really clear what should be done if a file is successfully created, but the attributes cannot be set. NFS doesn't allow partial success to be reported. Reporting failure is probably more misleading than reporting success, so the status is ignored. Signed-off-by:
-
NeilBrown authored
The attributes that nfsd might want to set on a file include 'struct iattr' as well as an ACL and security label. The latter two are passed around quite separately from the first, in part because they are only needed for NFSv4. This leads to some clumsiness in the code, such as the attributes NOT being set in nfsd_create_setattr(). We need to keep the directory locked until all attributes are set to ensure the file is never visibile without all its attributes. This need combined with the inconsistent handling of attributes leads to more clumsiness. As a first step towards tidying this up, introduce 'struct nfsd_attrs'. This is passed (by reference) to vfs.c functions that work with attributes, and is assembled by the various nfs*proc functions which call them. As yet only iattr is included, but future patches will expand this. Signed-off-by:
-
Jeff Layton authored
Between opening a file and setting a delegation on it, someone could rename or unlink the dentry. If this happens, we do not want to grant a delegation on the open. On a CLAIM_NULL open, we're opening by filename, and we may (in the non-create case) or may not (in the create case) be holding i_rwsem when attempting to set a delegation. The latter case allows a race. After getting a lease, redo the lookup of the file being opened and validate that the resulting dentry matches the one in the open file description. To properly redo the lookup we need an rqst pointer to pass to nfsd_lookup_dentry(), so make sure that is available. Signed-off-by:
-
Jeff Layton authored
Currently, we pass the fh of the opened file down through several functions so that alloc_init_deleg can pass it to delegation_blocked. The filehandle of the open file is available in the nfs4_file however, so there's no need to pass it in a separate argument. Drop the argument from alloc_init_deleg, nfs4_open_delegation and nfs4_set_delegation. Signed-off-by:
-
Chuck Lever authored
Refactor so that CB_OFFLOAD arguments can be passed without allocating a whole struct nfsd4_copy object. On my system (x86_64) this removes another 96 bytes from struct nfsd4_copy. Signed-off-by: -
Chuck Lever authored
Refactor for legibility. Signed-off-by: -
Chuck Lever authored
Instead of manufacturing a phony struct nfsd_file, pass the struct file returned by nfs42_ssc_open() directly to nfsd4_do_copy(). Signed-off-by: -
Chuck Lever authored
Refactor: Now that nfsd4_do_copy() no longer calls the cleanup helpers, plumb the use of struct file pointers all the way down to _nfsd_copy_file_range(). Signed-off-by: -
Chuck Lever authored
Move the nfsd4_cleanup_*() call sites out of nfsd4_do_copy(). A subsequent patch will modify one of the new call sites to avoid the need to manufacture the phony struct nfsd_file. Signed-off-by: -
Chuck Lever authored
The @src parameter is sometimes a pointer to a struct nfsd_file and sometimes a pointer to struct file hiding in a phony struct nfsd_file. Refactor nfsd4_cleanup_inter_ssc() so the @src parameter is always an explicit struct file. Signed-off-by: -
Chuck Lever authored
Clean up: saves 8 bytes, and we can replace check_and_set_stop_copy() with an atomic bitop. Signed-off-by: -
Chuck Lever authored
Clean up: All call sites are in fs/nfsd/nfs4proc.c. Signed-off-by: -
Chuck Lever authored
Pack the fields to reduce the size of struct nfsd4_op, which is used an array in struct nfsd4_compoundargs. sizeof(struct nfsd4_op): Before: /* size: 672, cachelines: 11, members: 5 */ After: /* size: 640, cachelines: 10, members: 5 */ Signed-off-by: -
Chuck Lever authored
struct nfsd4_copy is part of struct nfsd4_op, which resides in an 8-element array. sizeof(struct nfsd4_op): Before: /* size: 1696, cachelines: 27, members: 5 */ After: /* size: 672, cachelines: 11, members: 5 */ Signed-off-by: -
Chuck Lever authored
struct nfsd4_copy_notify is part of struct nfsd4_op, which resides in an 8-element array. sizeof(struct nfsd4_op): Before: /* size: 2208, cachelines: 35, members: 5 */ After: /* size: 1696, cachelines: 27, members: 5 */ Signed-off-by: -
Chuck Lever authored
Suggested-by:
Dai Ngo <dai.ngo@oracle.com> Signed-off-by:
-
Chuck Lever authored
In function ‘strncpy’, inlined from ‘nfsd4_ssc_setup_dul’ at /home/cel/src/linux/manet/fs/nfsd/nfs4proc.c:1392:3, inlined from ‘nfsd4_interssc_connect’ at /home/cel/src/linux/manet/fs/nfsd/nfs4proc.c:1489:11: /home/cel/src/linux/manet/include/linux/fortify-string.h:52:33: warning: ‘__builtin_strncpy’ specified bound 63 equals destination size [-Wstringop-truncation] 52 | #define __underlying_strncpy __builtin_strncpy | ^ /home/cel/src/linux/manet/include/linux/fortify-string.h:89:16: note: in expansion of macro ‘__underlying_strncpy’ 89 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Chuck Lever authored
Similar changes to nfsd4_encode_readv(), all bundled into a single patch. Reviewed-by:
-
Chuck Lever authored
Clean up: Use a helper instead of open-coding the calculation of the XDR pad size. Reviewed-by:
-
Chuck Lever authored
Clean-up: Now that nfsd4_encode_readv() does not have to encode the EOF or rd_length values, it no longer needs to subtract 8 from @starting_len. Reviewed-by:
-
Chuck Lever authored
write_bytes_to_xdr_buf() is pretty expensive to use for inserting an XDR data item that is always 1 XDR_UNIT at an address that is always XDR word-aligned. Since both the readv and splice read paths encode EOF and maxcount values, move both to a common code path. Reviewed-by:
-
Chuck Lever authored
Refactor: Make the EOF result available in the entire NFSv4 READ path. Reviewed-by:
-
Chuck Lever authored
Do the test_bit() once -- this reduces the number of locked-bus operations and makes the function a little easier to read. Reviewed-by:
-
Chuck Lever authored
write_bytes_to_xdr_buf() is a generic way to place a variable-length data item in an already-reserved spot in the encoding buffer. However, it is costly. In nfsd4_encode_fattr(), it is unnecessary because the data item is fixed in size and the buffer destination address is always word-aligned. Reviewed-by:
-
Chuck Lever authored
write_bytes_to_xdr_buf() is a generic way to place a variable-length data item in an already-reserved spot in the encoding buffer. However, it is costly, and here, it is unnecessary because the data item is fixed in size, the buffer destination address is always word-aligned, and the destination location is already in @p. Reviewed-by:
-
Jeff Layton authored
This printk pops every time nfsd.ko gets plugged in. Most kmods don't do that and this one is not very informative. Olaf's email address seems to be defunct at this point anyway. Just drop it. Cc: Olaf Kirch <okir@suse.com> Signed-off-by:
-
Dai Ngo authored
Currently there is no limit on how many v4 clients are supported by the system. This can be a problem in systems with small memory configuration to function properly when a very large number of clients exist that creates memory shortage conditions. This patch enforces a limit of 1024 NFSv4 clients, including courtesy clients, per 1GB of system memory. When the number of the clients reaches the limit, requests that create new clients are returned with NFS4ERR_DELAY and the laundromat is kicked start to trim old clients. Due to the overhead of the upcall to remove the client record, the maximun number of clients the laundromat removes on each run is limited to 128. This is done to ensure the laundromat can still process the other tasks in a timely manner. Since there is now a limit of the number of clients, the 24-hr idle time limit of courtesy client is no longer needed and was removed. Signed-off-by:
-
Dai Ngo authored
Add counter nfs4_client_count to keep track of the total number of v4 clients, including courtesy clients, in the system. Signed-off-by:
-
Dai Ngo authored
This patch moves the v4 specific code from nfsd_init_net() to nfsd4_init_leases_net() helper in nfs4state.c Signed-off-by:
-
Chuck Lever authored
The documenting comment for struct nf_file states: /* * A representation of a file that has been opened by knfsd. These are hashed * in the hashtable by inode pointer value. Note that this object doesn't * hold a reference to the inode by itself, so the nf_inode pointer should * never be dereferenced, only used for comparison. */ Replace the two existing dereferences to make the comment always true. Reviewed-by:
-
Chuck Lever authored
The last close of a file should enable other accessors to open and use that file immediately. Leaving the file open in the filecache prevents other users from accessing that file until the filecache garbage-collects the file -- sometimes that takes several seconds. Reported-by:
Wang Yugui <wangyugui@e16-tech.com> Link: https://bugzilla.linux-nfs.org/show_bug.cgi?387Reviewed-by:
-
Chuck Lever authored
Avoid recording the allocation of an nfsd_file item that is immediately released because a matching item was already inserted in the hash. Reviewed-by:
-
Chuck Lever authored
These tracepoints collect different information: the create case does not open a file, so there's no nf_file available. Reviewed-by:
-
Chuck Lever authored
Reviewed-by:
-
