1. 09 Feb, 2012 21 commits
    • Linus Torvalds's avatar
      Merge tag 'tty-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · 19e00f2f
      Linus Torvalds authored
      Serial/TTY fixes for the 3.3-rc3 tree
      
      Just a few new device ids, omap serial driver regression fixes, and a
      build fix for the 8250 driver movement.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      
      * tag 'tty-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
        tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds
        tty: serial: OMAP: block idle while the UART is transferring data in PIO mode
        tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode
        m32r: relocate drivers back out of 8250 dir
        tty: fix a build failure on sparc
        serial: samsung: Add support for EXYNOS5250
        serial: samsung: Add support for EXYNOS4212 and EXYNOS4412
        drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer
      19e00f2f
    • Linus Torvalds's avatar
      Merge tag 'staging-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · b05ee6bf
      Linus Torvalds authored
      Staging tree patches for 3.3-rc3
      
      Big things here is the deletion of the Android pmem driver, as it's
      obsolete and no one uses it, the gma500 driver as it's already in the
      drm portion of the kernel tree, and the pohmelfs filesystem as it's
      obsolete and a rewritten version is being proposed for the fs/ section
      of the kernel.
      
      Other than that, a smattering of different bugfixes and regressions, and
      some omap drm api merge fixups that were needed due to api changes in
      the main portion of the drm tree, allowing this code to build properly
      again.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      
      * tag 'staging-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
        staging: pohmelfs: remove drivers/staging/pohmelfs
        staging: android/ram_console: Don't build on arches w/o ioremap
        staging: r8712u: Use asynchronous firmware loading
        staging: usbip: fix to prevent potentially using uninitialized spinlock
        staging: r8712u: Fix problem when CONFIG_R8712_AP is set
        staging: tidspbridge: fix incorrect free to drv_datap
        staging: tidspbridge: fix bridge_open memory leaks
        staging: android: lowmemorykiller: Don't wait more than one second for a process to die
        MAINTAINERS: staging: iio: add iio information
        staging: zcache: fix serialization bug in zv stats
        staging: fix go7007-usb license
        Staging: android: binder: Fix crashes when sharing a binder file between processes
        Staging: android: Remove pmem driver
        Staging: asus_oled: fix NULL-ptr crash on unloading
        Staging: asus_oled: fix image processing
        Staging: android: binder: Don't call dump_stack in binder_vma_open
        staging: r8712u: Add new Sitecom UsB ID
        zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention.
        zcache: fix deadlock condition
        staging: drm/omap: fix locking issue
        ...
      b05ee6bf
    • Linus Torvalds's avatar
      Merge tag 'driver-core-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core · b0286db4
      Linus Torvalds authored
      Driver core fixes for the 3.3-rc3 tree.
      
      A few fixes for kobject warnings that have popped up in the cpu hotplug path,
      and a regression fix for the speed of the hotplug memory code.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      
      * tag 'driver-core-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
        driver-core: cpu: fix kobject warning when hotplugging a cpu
        ACPI: remove duplicated lines of merging problems with acpi_processor_add
        docbook: fix fatal errors in device-drivers docbook and add DMA Management section
        drivers/base/memory.c: fix memory_dev_init() long delay
        driver core: cpu: remove kernel warning when removing a cpu
      b0286db4
    • Linus Torvalds's avatar
      Merge tag 'char-misc-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · ae5cdd40
      Linus Torvalds authored
      Minor char-misc fixes for 3.3-rc3
      
      Nothing big here, some Kconfig fixes for the MISC_DEVICES config option
      that was being used incorrectly, and some other minor bug fixes.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      
      * tag 'char-misc-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
        mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chip
        cs5535-mfgpt: don't call __init function from __devinit
        vmw_balloon: fix for a -Wuninitialized warning
        drivers: misc: Remove MISC_DEVICES config option
        c2port: fix build error for duramar2150 due to missing header.
      ae5cdd40
    • Linus Torvalds's avatar
      Merge tag 'usb-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · fe250923
      Linus Torvalds authored
      USB fixes for 3.3-rc3
      
      Here are a few minor USB fixes and a bunch of device id updates for the
      USB drivers.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      
      * tag 'usb-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        USB: usbserial: add new PID number (0xa951) to the ftdi driver
        usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
        usb: musb: fix a build error on mips
        uwb & wusb & usb wireless controllers: fix kconfig error & build errors
        usb: Skip PCI USB quirk handling for Netlogic XLP
        powerpc/usb: fix issue of CPU halt when missing USB PHY clock
        usb: otg: mv_otg: Add dependence
        usb: host: Distinguish Kconfig text for Freescale controllers
        USB: add new zte 3g-dongle's pid to option.c
        usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
        USB: qcserial: don't enable autosuspend
        USB: qcserial: add several new serial devices
        usb: otg: mv_otg: Add dependence
        usb: gadget: zero: fix bug in loopback autoresume handling
      fe250923
    • Paul Walmsley's avatar
      tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds · 19723452
      Paul Walmsley authored
      The receive FIFO wakeup latency estimate in the omap-serial driver is
      three orders of magnitude too small.  This effectively prevents the
      MPU from going to a low-power state when CONFIG_CPU_IDLE=y.  This is a
      major power management regression and masks some other FIFO-related
      bugs in the driver.
      
      Fix by correcting the most egregious problem in the RX wakeup latency
      estimate.  There are several other flaws in the estimator; these will
      be fixed by a separate patch series intended for 3.4.
      
      The difference in low-power states with this patch can be observed via
      debugfs in pm_debug/count.
      
      This estimate does not have any effect when CONFIG_CPU_IDLE=n.
      Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
      Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
      Cc: Alan Cox <alan@linux.intel.com>
      Acked-by: default avatarGovindraj.R <govindraj.raja@ti.com>
      Reviewed-by: default avatarKevin Hilman <khilman@ti.com>
      Tested-by: default avatarKevin Hilman <khilman@ti.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      19723452
    • Paul Walmsley's avatar
      tty: serial: OMAP: block idle while the UART is transferring data in PIO mode · be4b0281
      Paul Walmsley authored
      Prevent OMAP UARTs from going idle while they are still transferring
      data in PIO mode.  This works around an oversight in the OMAP UART
      hardware present in OMAP34xx and earlier: an idle UART won't send a
      wakeup when the TX FIFO threshold is reached.  This causes long delays
      during data transmission when the MPU powerdomain enters a low-power
      mode.  The MPU interrupt controller is not able to respond to
      interrupts when it's in a low-power state, so the TX buffer is not
      refilled until another wakeup event occurs.
      
      This fix changes the erratum i291 DMA idle workaround.  Rather than
      toggling between force-idle and no-idle, it will toggle between
      smart-idle and no-idle.  The important part of the workaround is the
      no-idle part, so this shouldn't result in any change in behavior.
      
      This fix should work on all OMAP UARTs.  Future patches intended for
      the 3.4 merge window will make this workaround conditional on a
      "feature" flag, and will use the OMAP36xx+ TX event wakeup support.
      
      Thanks to Kevin Hilman <khilman@ti.com> for mentioning the erratum i291
      workaround, which led to the development of this approach.
      Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
      Cc: Alan Cox <alan@linux.intel.com>
      Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
      Acked-by: default avatarGovindraj.R <govindraj.raja@ti.com>
      Reviewed-by: default avatarKevin Hilman <khilman@ti.com>
      Tested-by: default avatarKevin Hilman <khilman@ti.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      be4b0281
    • Paul Walmsley's avatar
      tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode · 0ba5f668
      Paul Walmsley authored
      In the (default) PIO mode, use a one-byte RX FIFO threshold.  The OMAP
      UART IP blocks do not appear to be capable of waking the system under
      an RX timeout condition.  Since the previous RX FIFO threshold was 16
      bytes, this meant that omap-serial.c did not become aware of any
      received data until all those bytes arrived or until another UART
      interrupt occurred.  This made the serial console and presumably other
      serial applications (GPS, serial Bluetooth) unusable or extremely
      slow.  A 1-byte RX FIFO threshold also allows the MPU to enter a
      low-power consumption state while waiting for the FIFO to fill.
      
      This can be verified using the serial console by comparing the
      behavior when "0123456789abcde" is pasted in from another window, with
      the behavior when "0123456789abcdef" is pasted in.  Since the former
      string is less than sixteen bytes long, the string is not echoed for
      some time, while the latter string is echoed immediately.
      
      DMA operation is unaffected by this patch.
      
      Thanks to Russell King - ARM Linux <linux@arm.linux.org.uk> for some
      additional information on the standard behavior of the RX timeout
      event, which was used to improve this commit description.
      Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
      Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
      Cc: Govindraj Raja <govindraj.r@ti.com>
      Cc: Alan Cox <alan@linux.intel.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Reviewed-by: default avatarKevin Hilman <khilman@ti.com>
      Tested-by: default avatarKevin Hilman <khilman@ti.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0ba5f668
    • David Howells's avatar
      Reduce the number of expensive division instructions done by _parse_integer() · 690d137f
      David Howells authored
      _parse_integer() does one or two division instructions (which are slow)
      per digit parsed to perform the overflow check.
      
      Furthermore, these are particularly expensive examples of division
      instruction as the number of clock cycles required to complete them may
      go up with the position of the most significant set bit in the dividend:
      
      	if (*res > div_u64(ULLONG_MAX - val, base))
      
      which is as maximal as possible.
      
      Worse, on 32-bit arches, more than one of these division instructions
      may be required per digit.
      
      So, assuming we don't support a base of more than 16, skip the check if the
      top nibble of the result is not set at this point.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      [ Changed it to not dereference the pointer all the time - even if the
        compiler can and does optimize it away, the code just looks cleaner.
        And edited the top nybble test slightly to make the code generated on
        x86-64 better in the loop - test against a hoisted constant instead of
        shifting and testing the result ]
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      690d137f
    • Linus Torvalds's avatar
      Linux 3.3-rc3 · d65b4e98
      Linus Torvalds authored
      d65b4e98
    • Linus Torvalds's avatar
      Merge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu · 63082402
      Linus Torvalds authored
      One patch fixes an bug in the ARM/MSM IOMMU code which returned sucess
      in the unmap function even when an error occured and the other patch
      adds a workaround into the AMD IOMMU driver to better handle broken IVRS
      ACPI tables (this patch fixes the case when a device is not listed in
      the table but actually translated by the iommu).
      
      * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
        iommu/msm: Fix error handling in msm_iommu_unmap()
        iommu/amd: Work around broken IVRS tables
      63082402
    • Linus Torvalds's avatar
      Merge branch '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending · 19e75ed4
      Linus Torvalds authored
      This series contains pending target bug-fixes and cleanups for v3.3-rc3
      that have been addressed the past weeks in lio-core.git.
      
      Some of the highlights include:
      
       - Fix handling for control CDBs with data greater than PAGE_SIZE (andy)
       - Use IP_FREEBIND for iscsi-target to address network portal creation
         issues with systemd (dax)
       - Allow PERSISTENT RESERVE IN for non-reservation holder (marco)
       - Fix iblock se_dev_attrib.unmap_granularity (marco)
       - Fix unsupported WRITE_SAME sense payload handling (martin)
       - Add workaround for zero-length control CDB handling (nab)
       - Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT (nab)
       - Fix target_submit_cmd() exception handling (nab)
       - Return correct ASC for unimplemented VPD pages (roland)
       - Don't zero pages used for data buffers (roland)
       - Fix return code of core_tpg_.*_lun (sebastian)
      
      * '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
        target: Fix unsupported WRITE_SAME sense payload
        iscsi: use IP_FREEBIND socket option
        iblock: fix handling of large requests
        target: handle empty string writes in sysfs
        iscsi_target: in_aton needs linux/inet.h
        target: Fix iblock se_dev_attrib.unmap_granularity
        target: Fix target_submit_cmd() exception handling
        target: Change target_submit_cmd() to return void
        target: accept REQUEST_SENSE with 18bytes
        target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0
        target: Return correct ASC for unimplemented VPD pages
        iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT
        target: Allow control CDBs with data > 1 page
        iscsi-target: Fix up a few assignments
        iscsi-target: make one-bit bitfields unsigned
        iscsi-target: Fix double list_add with iscsit_alloc_buffs reject
        iscsi-target: Fix reject release handling in iscsit_free_cmd()
        target: fix return code of core_tpg_.*_lun
        target: use save/restore lock primitive in core_dec_lacl_count()
        target: avoid multiple outputs in scsi_dump_inquiry()
        ...
      19e75ed4
    • Linus Torvalds's avatar
      Merge tag 'md-3.3-fixes' of git://neil.brown.name/md · 4d39aa1b
      Linus Torvalds authored
      Some simple md-related fixes.
      
      1/ two small fixes to ensure we handle an interrupted resync properly.
      2/ avoid loading the bitmap multiple times in dm-raid
      
      * tag 'md-3.3-fixes' of git://neil.brown.name/md:
        md: two small fixes to handling interrupt resync.
        Prevent DM RAID from loading bitmap twice.
      4d39aa1b
    • Linus Torvalds's avatar
      Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6 · 4a68d54c
      Linus Torvalds authored
      SPI bug fixes for v3.3-rc2
      
      Minor SPI device driver changes.  A rename of the pch_spi_pcidev symbol
      that merely eliminates a modpost warning, and a Kconfig change to allow
      the Samsung spi driver to build on EXYNOS.
      
      * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
        spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver
        spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4
      4a68d54c
    • Linus Torvalds's avatar
      Merge branch 'akpm' (Andrew's tree) · 15a46353
      Linus Torvalds authored
      Five fixes
      
      * branch 'akpm':
        pcmcia: fix socket refcount decrementing on each resume
        mm: fix UP THP spin_is_locked BUGs
        drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax
        mm: compaction: check for overlapping nodes during isolation for migration
        nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()
      15a46353
    • Russell King's avatar
      pcmcia: fix socket refcount decrementing on each resume · 025e4ab3
      Russell King authored
      This fixes a memory-corrupting bug: not only does it cause the warning,
      but as a result of dropping the refcount to zero, it causes the
      pcmcia_socket0 device structure to be freed while it still has
      references, causing slab caches corruption.  A fatal oops quickly
      follows this warning - often even just a 'dmesg' following the warning
      causes the kernel to oops.
      
      While testing suspend/resume on an ARM device with PCMCIA support, and a
      CF card inserted, I found that after five suspend and resumes, the
      kernel would complain, and shortly die after with slab corruption.
      
        WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()
      
      As the message doesn't give a clue about which kobject, and the built-in
      debugging in drivers/base/power/main.c happens too late, this was added
      right before each get_device():
      
        printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount));
      
      and on the 3rd s2ram cycle, the following behaviour observed:
      
      On the 3rd suspend/resume cycle:
      
        dpm_prepare: c1a0d998 [pcmcia_socket0] 3
        dpm_suspend: c1a0d998 [pcmcia_socket0] 3
        dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3
        dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3
        dpm_resume: c1a0d998 [pcmcia_socket0] 3
        dpm_complete: c1a0d998 [pcmcia_socket0] 2
      
      4th:
      
        dpm_prepare: c1a0d998 [pcmcia_socket0] 2
        dpm_suspend: c1a0d998 [pcmcia_socket0] 2
        dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2
        dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2
        dpm_resume: c1a0d998 [pcmcia_socket0] 2
        dpm_complete: c1a0d998 [pcmcia_socket0] 1
      
      5th:
      
        dpm_prepare: c1a0d998 [pcmcia_socket0] 1
        dpm_suspend: c1a0d998 [pcmcia_socket0] 1
        dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1
        dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1
        dpm_resume: c1a0d998 [pcmcia_socket0] 1
        dpm_complete: c1a0d998 [pcmcia_socket0] 0
        ------------[ cut here ]------------
        WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()
        Modules linked in: ucb1x00_core
        Backtrace:
        [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c)
        [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68)
        [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28)
        [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50)
        [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24)
        [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20)
        ...
      
      Looking at commit 7b24e798 ("pcmcia: split up central event handler"),
      the following change was made to cs.c:
      
                      return 0;
              }
       #endif
      -
      -       send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
      +       if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
      +               skt->callback->early_resume(skt);
              return 0;
       }
      
      And the corresponding change in ds.c is from:
      
      -static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
      -{
      -       struct pcmcia_socket *s = pcmcia_get_socket(skt);
      ...
      -       switch (event) {
      ...
      -       case CS_EVENT_PM_RESUME:
      -               if (verify_cis_cache(skt) != 0) {
      -                       dev_dbg(&skt->dev, "cis mismatch - different card\n");
      -                       /* first, remove the card */
      -                       ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
      -                       mutex_lock(&s->ops_mutex);
      -                       destroy_cis_cache(skt);
      -                       kfree(skt->fake_cis);
      -                       skt->fake_cis = NULL;
      -                       s->functions = 0;
      -                       mutex_unlock(&s->ops_mutex);
      -                       /* now, add the new card */
      -                       ds_event(skt, CS_EVENT_CARD_INSERTION,
      -                                CS_EVENT_PRI_LOW);
      -               }
      -               break;
      ...
      -    }
      
      -    pcmcia_put_socket(s);
      
      -    return 0;
      -} /* ds_event */
      
      to:
      
      +static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
      +{
      +       if (!verify_cis_cache(skt)) {
      +               pcmcia_put_socket(skt);
      +               return 0;
      +       }
      
      +       dev_dbg(&skt->dev, "cis mismatch - different card\n");
      
      +       /* first, remove the card */
      +       pcmcia_bus_remove(skt);
      +       mutex_lock(&skt->ops_mutex);
      +       destroy_cis_cache(skt);
      +       kfree(skt->fake_cis);
      +       skt->fake_cis = NULL;
      +       skt->functions = 0;
      +       mutex_unlock(&skt->ops_mutex);
      
      +       /* now, add the new card */
      +       pcmcia_bus_add(skt);
      +       return 0;
      +}
      
      As can be seen, the original function called pcmcia_get_socket() and
      pcmcia_put_socket() around the guts, whereas the replacement code
      calls pcmcia_put_socket() only in one path.  This creates an imbalance
      in the refcounting.
      
      Testing with pcmcia_put_socket() put removed shows that the bug is gone:
      
        dpm_suspend: c1a10998 [pcmcia_socket0] 5
        dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5
        dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5
        dpm_resume: c1a10998 [pcmcia_socket0] 5
        dpm_complete: c1a10998 [pcmcia_socket0] 5
      Tested-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Cc: Dominik Brodowski <linux@dominikbrodowski.net>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      025e4ab3
    • Hugh Dickins's avatar
      mm: fix UP THP spin_is_locked BUGs · b9980cdc
      Hugh Dickins authored
      Fix CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_SMP=n CONFIG_DEBUG_VM=y
      CONFIG_DEBUG_SPINLOCK=n kernel: spin_is_locked() is then always false,
      and so triggers some BUGs in Transparent HugePage codepaths.
      
      asm-generic/bug.h mentions this problem, and provides a WARN_ON_SMP(x);
      but being too lazy to add VM_BUG_ON_SMP, BUG_ON_SMP, WARN_ON_SMP_ONCE,
      VM_WARN_ON_SMP_ONCE, just test NR_CPUS != 1 in the existing VM_BUG_ONs.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b9980cdc
    • Axel Lin's avatar
      drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax · ec44fd42
      Axel Lin authored
      In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and
      pltfm->als_vmax is 0.  This does not make sense.  I think what we want
      here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV.
      
      Both als_vmin and als_vmax local variables will be set to
      pltfm->als_vmin and pltfm->als_vmax by a few lines latter.  Thus also
      remove a redundant assignment for als_vmin and als_vmax in this patch.
      Signed-off-by: default avatarAxel Lin <axel.lin@gmail.com>
      Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
      Acked-by: default avatarMilo(Woogyom) Kim <milo.kim@ti.com>
      Tested-by: default avatarMilo(Woogyom) Kim <milo.kim@ti.com>
      Cc: Richard Purdie <rpurdie@rpsys.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ec44fd42
    • Mel Gorman's avatar
      mm: compaction: check for overlapping nodes during isolation for migration · dc908600
      Mel Gorman authored
      When isolating pages for migration, migration starts at the start of a
      zone while the free scanner starts at the end of the zone.  Migration
      avoids entering a new zone by never going beyond the free scanned.
      
      Unfortunately, in very rare cases nodes can overlap.  When this happens,
      migration isolates pages without the LRU lock held, corrupting lists
      which will trigger errors in reclaim or during page free such as in the
      following oops
      
        BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
        IP: [<ffffffff810f795c>] free_pcppages_bulk+0xcc/0x450
        PGD 1dda554067 PUD 1e1cb58067 PMD 0
        Oops: 0000 [#1] SMP
        CPU 37
        Pid: 17088, comm: memcg_process_s Tainted: G            X
        RIP: free_pcppages_bulk+0xcc/0x450
        Process memcg_process_s (pid: 17088, threadinfo ffff881c2926e000, task ffff881c2926c0c0)
        Call Trace:
          free_hot_cold_page+0x17e/0x1f0
          __pagevec_free+0x90/0xb0
          release_pages+0x22a/0x260
          pagevec_lru_move_fn+0xf3/0x110
          putback_lru_page+0x66/0xe0
          unmap_and_move+0x156/0x180
          migrate_pages+0x9e/0x1b0
          compact_zone+0x1f3/0x2f0
          compact_zone_order+0xa2/0xe0
          try_to_compact_pages+0xdf/0x110
          __alloc_pages_direct_compact+0xee/0x1c0
          __alloc_pages_slowpath+0x370/0x830
          __alloc_pages_nodemask+0x1b1/0x1c0
          alloc_pages_vma+0x9b/0x160
          do_huge_pmd_anonymous_page+0x160/0x270
          do_page_fault+0x207/0x4c0
          page_fault+0x25/0x30
      
      The "X" in the taint flag means that external modules were loaded but but
      is unrelated to the bug triggering.  The real problem was because the PFN
      layout looks like this
      
        Zone PFN ranges:
          DMA      0x00000010 -> 0x00001000
          DMA32    0x00001000 -> 0x00100000
          Normal   0x00100000 -> 0x01e80000
        Movable zone start PFN for each node
        early_node_map[14] active PFN ranges
            0: 0x00000010 -> 0x0000009b
            0: 0x00000100 -> 0x0007a1ec
            0: 0x0007a354 -> 0x0007a379
            0: 0x0007f7ff -> 0x0007f800
            0: 0x00100000 -> 0x00680000
            1: 0x00680000 -> 0x00e80000
            0: 0x00e80000 -> 0x01080000
            1: 0x01080000 -> 0x01280000
            0: 0x01280000 -> 0x01480000
            1: 0x01480000 -> 0x01680000
            0: 0x01680000 -> 0x01880000
            1: 0x01880000 -> 0x01a80000
            0: 0x01a80000 -> 0x01c80000
            1: 0x01c80000 -> 0x01e80000
      
      The fix is straight-forward.  isolate_migratepages() has to make a
      similar check to isolate_freepage to ensure that it never isolates pages
      from a zone it does not hold the LRU lock for.
      
      This was discovered in a 3.0-based kernel but it affects 3.1.x, 3.2.x
      and current mainline.
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Acked-by: default avatarMichal Nazarewicz <mina86@mina86.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dc908600
    • Xi Wang's avatar
      nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments() · 1ecd3c7e
      Xi Wang authored
      nsegs is read from userspace.  Limit its value and avoid overflowing nsegs
      * sizeof(__u64) in the subsequent call to memdup_user().
      
      This patch complements 481fe17e ("nilfs2: potential integer overflow
      in nilfs_ioctl_clean_segments()").
      Signed-off-by: default avatarXi Wang <xi.wang@gmail.com>
      Cc: Haogang Chen <haogangchen@gmail.com>
      Acked-by: default avatarRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1ecd3c7e
    • Evgeniy Polyakov's avatar
      staging: pohmelfs: remove drivers/staging/pohmelfs · 67435319
      Evgeniy Polyakov authored
      New pohmelfs is coming, and it is time to remove deadly old design
      https://lkml.org/lkml/2012/2/8/293Signed-off-by: default avatarEvgeniy Polyakov <zbr@ioremap.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      67435319
  2. 08 Feb, 2012 19 commits