- 14 Aug, 2008 11 commits
-
-
Alan Stern authored
This patch (as1122) fixes a bug: When an interface is unregistered, its children (sysfs files and endpoint devices) are unregistered after it instead of before. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Kay Sievers <kay.sievers@vrfy.org> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1121) fixes a bug in the USB serial core. When a device is unregistered, the core will give back its minors -- even if the device hasn't been assigned any! The patch reserves the highest minor value (255) to mean that no minor was assigned. It also removes some dead code and does a small style fixup. Signed-off-by:
-
Felipe Balbi authored
Without it, we might have trouble when trying to write some composite gadget drivers. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Dave Jones authored
usb-storage: quirk around v1.11 firmware on Nikon D40 https://bugzilla.redhat.com/show_bug.cgi?id=454028 Just as in earlier firmware versions, we need to perform this quirk for the latest version too. Speculatively do the entry for the D80 too, as they seem to have the same firmware problems historically. Signed-off-by:
Dave Jones <davej@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by:
-
Alan Stern authored
This patch (as1114) fixes a problem that was revealed by an earlier patch (as1069b). Some broken controllers seem never to turn off their RHCS interrupt status bit, even when told to do so. As a result they generate an interrupt storm and hang the system. The patch avoids enabling RHSC interrupt requests when the RHCS status bit is already set. This should have no adverse affects on normal controllers, since they won't set the status bit until a root-hub status change actually occurs, in which case we wouldn't enable RHSC interrupt requests anyway -- we would wait until the status change had been processed and cleared. Signed-off-by:
-
Alexander Beregalov authored
usb/core/driver: fix warning: drivers/usb/core/driver.c:834: warning: 'do_unbind_rebind' defined but not used Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Acked-by:
-
Alan Stern authored
This patch (as1117) adds a kerneldoc line for the "needs_binding" field in struct usb_interface. It was accidentally omitted when the field was added. Signed-off-by:
-
Frederik Kriewitz authored
The Patch adds support for Luminance Stellaris Evaluation/Development Kits (FTDI 2232C based). The PIDs were missing. Successfully tested with a Stellaris LM3S8962 Evaluation kit. Signed-off-by:
Frederik Kriewitz <frederik@kriewitz.eu> Cc: stable <stable@kernel.org> Signed-off-by:
-
André Schenk authored
USB product id registration for the ELV HS485 USB adapter (www.elv.de) to their home automation bus system. Applies to 2.6.26. Signed-off-by:
Andre Schenk <andre@melior.s.bawue.de> Cc: stable <stable@kernel.org> Signed-off-by:
-
David Brownell authored
USB: fix USB boot crash, ecm_do_notify(), list_add corruption. prev->next should be next (ffff88003b8f82f8) This fixes a BUG() turned up by Ingo via randconfig testing, where CONFIG_LIST_DEBUG turned up list corruption. The corruption was caused by the dummy_hcd (single-machine test harness for gadget and HCD code) trashing the request queue when driven by the new CDC composite gadget an I/O pattern that was previously uncommon. Fix suggested by Alan Stern. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Wolfgang Mües authored
This patch removes the auerswald USB driver from the linux kernel 2.6.26. This driver was included into the kernel mainly to connect to the ISDN framework. This was done in linux 2.4.x. For 2.6.x, due to the fragile and moving ISDN support, this connection was never realized, and the only use of this driver was for device configuration. In the age of DSL, the demand of ISDN support is getting very low. Meanwhile, with the advent of libusb, an userspace driver was done for the device configuration which works fine for linux and mac. (Thanks to the libusb developers!). The userspace driver is downloadable from the auerswald web site. So this driver is obsolete now and has to be removed. Many thanks to all developers which helped me to bring this driver up and working. Signed-off-by:
Wolfgang Muees <wolfgang@iksw-muees.de> Signed-off-by:
-
- 13 Aug, 2008 29 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: padlock - fix VIA PadLock instruction usage with irq_ts_save/restore() crypto: hash - Add missing top-level functions crypto: hash - Fix digest size check for digest type crypto: tcrypt - Fix AEAD chunk testing crypto: talitos - Add handling for SEC 3.x treatment of link table
-
git://oss.sgi.com:8090/xfs/linux-2.6Linus Torvalds authored
* git://oss.sgi.com:8090/xfs/linux-2.6: (45 commits) [XFS] Fix use after free in xfs_log_done(). [XFS] Make xfs_bmap_*_count_leaves void. [XFS] Use KM_NOFS for debug trace buffers [XFS] use KM_MAYFAIL in xfs_mountfs [XFS] refactor xfs_mount_free [XFS] don't call xfs_freesb from xfs_unmountfs [XFS] xfs_unmountfs should return void [XFS] cleanup xfs_mountfs [XFS] move root inode IRELE into xfs_unmountfs [XFS] stop using file_update_time [XFS] optimize xfs_ichgtime [XFS] update timestamp in xfs_ialloc manually [XFS] remove the sema_t from XFS. [XFS] replace dquot flush semaphore with a completion [XFS] replace inode flush semaphore with a completion [XFS] extend completions to provide XFS object flush requirements [XFS] replace the XFS buf iodone semaphore with a completion [XFS] clean up stale references to semaphores [XFS] use get_unaligned_* helpers [XFS] Fix compile failure in xfs_buf_trace() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: rename structs dlm: add missing kfrees
-
Linus Torvalds authored
Done as a script (well, a single "git mv" actually) on request from Yoshinori Sato as a way to avoid a huge diff. Requested-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Teigland authored
Add a dlm_ prefix to the struct names in config.c. This resolves a conflict with struct node in particular, when include/linux/node.h happens to be included. Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
A couple of unlikely error conditions were missing a kfree on the error exit path. Reported-by:
Juha Leppanen <juha_motorsportcom@luukku.com> Signed-off-by:
-
Suresh Siddha authored
Wolfgang Walter reported this oops on his via C3 using padlock for AES-encryption: ################################################################## BUG: unable to handle kernel NULL pointer dereference at 000001f0 IP: [<c01028c5>] __switch_to+0x30/0x117 *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: Pid: 2071, comm: sleep Not tainted (2.6.26 #11) EIP: 0060:[<c01028c5>] EFLAGS: 00010002 CPU: 0 EIP is at __switch_to+0x30/0x117 EAX: 00000000 EBX: c0493300 ECX: dc48dd00 EDX: c0493300 ESI: dc48dd00 EDI: c0493530 EBP: c04cff8c ESP: c04cff7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process sleep (pid: 2071, ti=c04ce000 task=dc48dd00 task.ti=d2fe6000) Stack: dc48df30 c0493300 00000000 00000000 d2fe7f44 c03b5b43 c04cffc8 00000046 c0131856 0000005a dc472d3c c0493300 c0493470 d983ae00 00002696 00000000 c0239f54 00000000 c04c4000 c04cffd8 c01025fe c04f3740 00049800 c04cffe0 Call Trace: [<c03b5b43>] ? schedule+0x285/0x2ff [<c0131856>] ? pm_qos_requirement+0x3c/0x53 [<c0239f54>] ? acpi_processor_idle+0x0/0x434 [<c01025fe>] ? cpu_idle+0x73/0x7f [<c03a4dcd>] ? rest_init+0x61/0x63 ======================= Wolfgang also found out that adding kernel_fpu_begin() and kernel_fpu_end() around the padlock instructions fix the oops. Suresh wrote: These padlock instructions though don't use/touch SSE registers, but it behaves similar to other SSE instructions. For example, it might cause DNA faults when cr0.ts is set. While this is a spurious DNA trap, it might cause oops with the recent fpu code changes. This is the code sequence that is probably causing this problem: a) new app is getting exec'd and it is somewhere in between start_thread() and flush_old_exec() in the load_xyz_binary() b) At pont "a", task's fpu state (like TS_USEDFPU, used_math() etc) is cleared. c) Now we get an interrupt/softirq which starts using these encrypt/decrypt routines in the network stack. This generates a math fault (as cr0.ts is '1') which sets TS_USEDFPU and restores the math that is in the task's xstate. d) Return to exec code path, which does start_thread() which does free_thread_xstate() and sets xstate pointer to NULL while the TS_USEDFPU is still set. e) At the next context switch from the new exec'd task to another task, we have a scenarios where TS_USEDFPU is set but xstate pointer is null. This can cause an oops during unlazy_fpu() in __switch_to() Now: 1) This should happen with or with out pre-emption. Viro also encountered similar problem with out CONFIG_PREEMPT. 2) kernel_fpu_begin() and kernel_fpu_end() will fix this problem, because kernel_fpu_begin() will manually do a clts() and won't run in to the situation of setting TS_USEDFPU in step "c" above. 3) This was working before the fpu changes, because its a spurious math fault which doesn't corrupt any fpu/sse registers and the task's math state was always in an allocated state. With out the recent lazy fpu allocation changes, while we don't see oops, there is a possible race still present in older kernels(for example, while kernel is using kernel_fpu_begin() in some optimized clear/copy page and an interrupt/softirq happens which uses these padlock instructions generating DNA fault). This is the failing scenario that existed even before the lazy fpu allocation changes: 0. CPU's TS flag is set 1. kernel using FPU in some optimized copy routine and while doing kernel_fpu_begin() takes an interrupt just before doing clts() 2. Takes an interrupt and ipsec uses padlock instruction. And we take a DNA fault as TS flag is still set. 3. We handle the DNA fault and set TS_USEDFPU and clear cr0.ts 4. We complete the padlock routine 5. Go back to step-1, which resumes clts() in kernel_fpu_begin(), finishes the optimized copy routine and does kernel_fpu_end(). At this point, we have cr0.ts again set to '1' but the task's TS_USEFPU is stilll set and not cleared. 6. Now kernel resumes its user operation. And at the next context switch, kernel sees it has do a FP save as TS_USEDFPU is still set and then will do a unlazy_fpu() in __switch_to(). unlazy_fpu() will take a DNA fault, as cr0.ts is '1' and now, because we are in __switch_to(), math_state_restore() will get confused and will restore the next task's FP state and will save it in prev tasks's FP state. Remember, in __switch_to() we are already on the stack of the next task but take a DNA fault for the prev task. This causes the fpu leakage. Fix the padlock instruction usage by calling them inside the context of new routines irq_ts_save/restore(), which clear/restore cr0.ts manually in the interrupt context. This will not generate spurious DNA in the context of the interrupt which will fix the oops encountered and the possible FPU leakage issue. Reported-and-bisected-by:Wolfgang Walter <wolfgang.walter@stwm.de> Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
The top-level functions init/update/final were missing for ahash. Signed-off-by: -
Herbert Xu authored
The changeset ca786dc7 crypto: hash - Fixed digest size check missed one spot for the digest type. This patch corrects that error. Signed-off-by:
-
Herbert Xu authored
My changeset 4b22f0dd crypto: tcrpyt - Remove unnecessary kmap/kunmap calls introduced a typo that broke AEAD chunk testing. In particular, axbuf should really be xbuf. There is also an issue with testing the last segment when encrypting. The additional part produced by AEAD wasn't tested. Similarly, on decryption the additional part of the AEAD input is mistaken for corruption. Signed-off-by:
-
Lee Nipper authored
Later SEC revision requires the link table (used for scatter/gather) to have an extra entry to account for the total length in descriptor [4], which contains cipher Input and ICV. This only applies to decrypt, not encrypt. Without this change, on 837x, a gather return/length error results when a decryption uses a link table to gather the fragments. This is observed by doing a ping with size of 1447 or larger with AES, or a ping with size 1455 or larger with 3des. So, add check for SEC compatible "fsl,3.0" for using extra link table entry. Signed-off-by:
Lee Nipper <lee.nipper@freescale.com> Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
Lachlan McIlroy authored
The ticket allocation code got reworked in 2.6.26 and we now free tickets whereas before we used to cache them so the use-after-free went undetected. SGI-PV: 985525 SGI-Modid: xfs-linux-melb:xfs-kern:31877a Signed-off-by:
Lachlan McIlroy <lachlan@sgi.com> Signed-off-by:
David Chinner <david@fromorbit.com>
-
Ruben Porras authored
xfs_bmap_count_leaves and xfs_bmap_disk_count_leaves always return always 0, make them void. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31844a Signed-off-by:
Ruben Porras <ruben.porras@linworks.de> Signed-off-by:
Donald Douwsma <donaldd@sgi.com> Signed-off-by:
-
Lachlan McIlroy authored
Use KM_NOFS to prevent recursion back into the filesystem which can cause deadlocks. In the case of xfs_iread() we hold the lock on the inode cluster buffer while allocating memory for the trace buffers. If we recurse back into XFS to flush data that may require a transaction to allocate extents which needs log space. This can deadlock with the xfsaild thread which can't push the tail of the log because it is trying to get the inode cluster buffer lock. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31838a Signed-off-by:
-
Christoph Hellwig authored
Use KM_MAYFAIL for the m_perag allocation, we can deal with the error easily and blocking forever during mount is not a good idea either. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31837a Signed-off-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Christoph Hellwig authored
xfs_mount_free mostly frees the perag data, which is something that is duplicated in the mount error path. Move the XFS_QM_DONE call to the caller and remove the useless mutex_destroy/spinlock_destroy calls so that we can re-use it for the mount error path. Also rename it to xfs_free_perag to reflect what it does. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31836a Signed-off-by:
-
Christoph Hellwig authored
xfs_readsb is called before xfs_mount so xfs_freesb should be called after xfs_unmountfs, too. This means it now happens after a few things during the of xfs_unmount which all have nothing to do with the superblock. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31835a Signed-off-by:
-
Christoph Hellwig authored
xfs_unmounts can't and shouldn't return errors so declare it as returning void. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31833a Signed-off-by:
-
Christoph Hellwig authored
Remove all the useless flags and code keyed off it in xfs_mountfs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31831a Signed-off-by:
-
Christoph Hellwig authored
The root inode is allocated in xfs_mountfs so it should be release in xfs_unmountfs. For the unmount case that means we do it after the the xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the dmapi unmount event. Note that both reference the rip variable which might be freed by that time in case inode flushing has kicked in, so strictly speaking this might count as a bug fix SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31830a Signed-off-by:
-
Christoph Hellwig authored
xfs_ichtime updates the xfs_inode and Linux inode timestamps just fine, no need to call file_update_time and then copy the values over to the XFS inode. The only additional thing in file_update_time are checks not applicable to the write path. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31829a Signed-off-by:
-
Christoph Hellwig authored
Port a little optmization from file_update_time to xfs_ichgtime, and only update the timestamp and mark the inode dirty if the timestamp actually changes in the timer tick resultion supported by the running kernel. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31827a Signed-off-by:
-
Christoph Hellwig authored
In xfs_ialloc we just want to set all timestamps to the current time. We don't need to mark the inode dirty like xfs_ichgtime does, and we don't need nor want the opimizations in xfs_ichgtime that I will introduce in the next patch. So just opencode the timestamp update in xfs_ialloc, and remove the new unused XFS_ICHGTIME_ACC case in xfs_ichgtime. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31825a Signed-off-by:
-
David Chinner authored
Now that all users of the sema_t are gone from XFS we can finally kill it. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31823a Signed-off-by:
-
David Chinner authored
Use the new completion flush code to implement the dquot flush lock. Removes one of the final users of semaphores in the XFS code base. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31822a Signed-off-by:
-
David Chinner authored
Use the new completion flush code to implement the inode flush lock. Removes one of the final users of semaphores in the XFS code base. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31817a Signed-off-by:
-
David Chinner authored
XFS object flushing doesn't quite match existing completion semantics. It mixed exclusive access with completion. That is, we need to mark an object as being flushed before flushing it to disk, and then block any other attempt to flush it until the completion occurs. We do this but adding an extra count to the completion before we start using them. However, we still need to determine if there is a completion in progress, and allow no-blocking attempts fo completions to decrement the count. To do this we introduce: int try_wait_for_completion(struct completion *x) returns a failure status if done == 0, otherwise decrements done to zero and returns a "started" status. This is provided to allow counted completions to begin safely while holding object locks in inverted order. int completion_done(struct completion *x) returns 1 if there is no waiter, 0 if there is a waiter (i.e. a completion in progress). This replaces the use of semaphores for providing this exclusion and completion mechanism. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31816a Signed-off-by:
-
David Chinner authored
The xfs_buf_t b_iodonesema is really just a semaphore that wants to be a completion. Change it to a completion and remove the last user of the sema_t from XFS. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31815a Signed-off-by:
-
David Chinner authored
A lot of code has been converted away from semaphores, but there are still comments that reference semaphore behaviour. The log code is the worst offender. Update the comments to reflect what the code really does now. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31814a Signed-off-by:
-
