Return 'void' from wilc_wlan_parse_info_frame() as same constant value
is returned always. Also removed the 'size' from input parameter as its
not used in the function.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to use 'void' return type for wilc_wlan_cfg_indicate_rx(),
as its return value is not used in caller. The value set in
'rsp' argument is used to get the success status.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use 'void' return for wilc_wlan_txq_filter_dup_tcp_ack() as it always
return value '1' and its not used by the caller.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use 'void' return type for below functions as they always return '0' and
their return value is not used by caller.
add_tcp_pending_ack()
update_tcp_session()
add_tcp_pending_ack()
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use 'void' return for wilc_wlan_txq_add_to_head() as its always
return '0' value.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return type to 'void' for host_int_get_assoc_res_info() as its
return value is not used. 'rcvd_assoc_resp_info_len' parameter value is
used to know the status.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use 'void' return type for wilc_wfi_deinit_mon_interface(), as same
value always return.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to use 'void' return type for wilc_deinit_host_int(),
as its return value is not used in caller.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to use 'void' return type for wlan_deinit_locks() &
wlan_init_locks(), as same value is return.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to use 'void' return type for wilc_wlan_set_bssid(),
as its always returns the same value.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to use 'void' return type for wilc_frame_register(), as
its return value is not used.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clang warns that the address of a pointer will always evaluated as true
in a boolean context:

drivers/staging/wilc1000/linux_wlan.c:267:20: warning: address of
'vif->ndev->dev' will always evaluate to 'true'
[-Wpointer-bool-conversion]
        if (!(&vif->ndev->dev))
            ~  ~~~~~~~~~~~^~~
1 warning generated.

Since this statement always evaluates to false due to the logical not,
remove it.

Link: https://github.com/ClangBuiltLinux/linux/issues/121Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clang warns when one enumerated type is implicitly converted to another.

drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1264:34: warning:
implicit conversion from enumeration type 'enum btc_chip_interface' to
different enumeration type 'enum wifionly_chip_interface'
[-Wenum-conversion]
                wifionly_cfg->chip_interface = BTC_INTF_PCI;
                                             ~ ^~~~~~~~~~~~
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1267:34: warning:
implicit conversion from enumeration type 'enum btc_chip_interface' to
different enumeration type 'enum wifionly_chip_interface'
[-Wenum-conversion]
                wifionly_cfg->chip_interface = BTC_INTF_USB;
                                             ~ ^~~~~~~~~~~~
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1270:34: warning:
implicit conversion from enumeration type 'enum btc_chip_interface' to
different enumeration type 'enum wifionly_chip_interface'
[-Wenum-conversion]
                wifionly_cfg->chip_interface = BTC_INTF_UNKNOWN;
                                             ~ ^~~~~~~~~~~~~~~~
3 warnings generated.

Use the values from the correct enumerated type, wifionly_chip_interface.

BTC_INTF_UNKNOWN = WIFIONLY_INTF_UNKNOWN = 0
BTC_INTF_PCI = WIFIONLY_INTF_PCI = 1
BTC_INTF_USB = WIFIONLY_INTF_USB = 2

Link: https://github.com/ClangBuiltLinux/linux/issues/171Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The member regd of the struct rtl_priv is true in a boolean context.

drivers/staging/rtlwifi/regd.c:413:27: warning: address of 'rtlpriv->regd' will always
      evaluate to 'true' [-Wpointer-bool-conversion]
        if (!wiphy || !&rtlpriv->regd)
                      ~ ~~~~~~~~~^~~~
1 warning generated.

Link: https://github.com/ClangBuiltLinux/linux/issues/170Signed-off-by: Karthik Nishanth <nishanthkarthik@live.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl error:

ERROR: "foo * bar" should be "foo *bar"

in the interface/vchi directory
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the macros and structs associated with the
"vchi_msg_queuev_ex" function, which was previously removed in 49bec49f.
Also fixes the checkpatch.pl errors:

ERROR: Macros with complex values should be enclosed in parentheses
ERROR: space required after that ','
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl error:

ERROR: code indent should use tabs where possible

in the interface/vchi directory
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl error:

ERROR: space prohibited after/before that open/closed parenthesis

in the interface/vchi directory.
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As far as I can tell, this has never been used.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the compatible string in the DTB to select the correct cache line
size for the SoC - 32 for BCM2835, and 64 for BCM2836 and BCM2837.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The POHMELFS filesystem was removed in 2012 by commit 67435319
("staging: pohmelfs: remove drivers/staging/pohmelfs") promising that
a newer version will be included to the kernel, but unfortunately
it didn't happen.

Since likely any delopment of the filesystem is halted, the change removes
the abandoned POHMELFS documentation from the kernel tree.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not line break function definitions where not needed and
move the return type to the same line.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename function parameter of Hal_GetChnlGroup88E() to avoid CamelCase.
pGroup -> group
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After the removal of code valid only for 5 GHz the function
Hal_GetChnlGroup88E returns always true.

Change the return type to void and remove the variable bIn24G.

Remove the tests for the return value and the variable bIn24G
from the only user Hal_ReadTxPowerInfo88E().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove code valid only for 5 GHz from Hal_GetChnlGroup88E().
This addresses the below TODO item.

- find and remove remaining code valid only for 5 GHz. Most of the obvious
  ones have been removed, but things like channel > 14 still exist.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add vbox_bo_k[un]map helper functions instead of having code directly
poking struct vbox_bo internals.

While touch neighboring code anyways also fix a return -PTR_ERR(info),
which should be return PTR_ERR(info).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We always need to reserve the bo around a pin / unpin, so move the
reservation there.

This allows removing the vbox_fb_[un]pin helpers.

Note this means that we now no longer hold the bo reserved while
k[un]mapping it in vbox_fb.c this is fine as it is not necessary
to hold it reserved for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When vbox_set_up_input_mapping() gets called the first crtc might be
disable and not have a fb at all, triggering a NUL ptr deref at:

			vbox->input_mapping_width = CRTC_FB(crtci)->width;

Instead of using the fb from the crtc with id 0, just use the fb from
the first crtc with a fb. This is in the single_framebuffer = true path,
so all crtc-s point to the same fb anyways.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move pin / unpin of fb out of vbox_crtc_set_base_and_mode() so that it can
be used to implement the atomic_update drm_plane_helper_func for the primary
plane.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The fbdev compat fb gets pinned into VRAM at creation and then gets pinned
a second time when set as scanout buffer and unpinned when replaced, this
means its pin count never becomes less then 1, so it is always at the same
address and there is no need for the vbox_fbdev_set_base() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Let's expose the primary plane initialization inside the vboxvideo driver
in preparation for universal planes and atomic.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow specifying where to pin the framebuffer bo, so that this helper can
be used from the cursor code too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vbox_pm_resume() is the only caller of vbox_drm_resume(), so squash the
2 functions into 1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the recommended way to create the drm_device structure,
according to DRM documentation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fold the driver_load / unload functions into the probe / remove functions
now that we are no longer using the deprecated drm_get_pci_dev() mechanism.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the setup of drm modesetting config from vbox_driver_load() to
vbox_mode_init().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed warning found by checkpatch
Signed-off-by: André Lehmann <lenneman@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Registering the connector explicitly right after creation is not necessary
for modesetting drivers, because drm_dev_register already takes care of
this on the core side, by calling drm_modeset_register_all.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

  WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
    Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
    Selected by [y]:
    - FB_OLPC_DCON [=y] && STAGING [=y] && X86 [=y] && OLPC [=y] && FB [=y]
                        && I2C [=y] && (GPIO_CS5535 [=n] || GPIO_CS5535 [=n]=n)
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes IRQ_MSG() and its users as currently it is a no-op.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>