Remove no longer used struct variables, kvaser_usb_ethtool_ops and
kvaser_usb_netdev_ops.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-15-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Remove KVASER_USB_QUIRK_HAS_HARDWARE_TIMESTAMP, since all devices got
hardware timestamp support.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-14-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add hardware timestamp support for all usbcan based devices (M16C).
The usbcan firmware is slightly different compared to the other Kvaser USB
interfaces:
  - The timestamp is provided by a 32-bit counter, with 10us resolution.
    Hence, the hardware timestamp will wrap after less than 12 hours.
  - Each Rx CAN or Tx ACK command only contains the 16-bits LSB of the
    timestamp counter.
  - The 16-bits MSB are sent in an asynchronous event (command), if any
    change occurred in the MSB since the last event.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-13-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Store MSB of timestamp, provided from the device via the clock overflow
event, for usbcan devices (M16C).
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-12-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

For usbcan devices (M16C), add struct usbcan_cmd_tx_acknowledge for Tx ACK
commands and struct usbcan_cmd_clk_overflow_event for clock overflow event
commands.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-11-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add hardware timestamp support to leaf based devices (M32C and leafimx).
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-10-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Rename local variable skb to err_skb.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-9-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: kvaser_usb: leaf: Replace kvaser_usb_leaf_m32c_dev_cfg with kvaser_usb_leaf_m32c_dev_cfg_{16,24,32}mhz

Add new struct kvaser_usb_dev_cfg constants,
kvaser_usb_leaf_m32c_dev_cfg_{16,24,32}mhz,
for M32C based leaf devices.

Note that the bittiming parameters are always calculated for 16MHz clock,
while the timestamps are in the actual clock frequency of the device.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-8-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Assign correct timestamp_freq to kvaser_usb_leaf_imx_dev_cfg_{16,24,32}mhz.
Since the driver didn't utilize the value, this didn't cause any problems.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-7-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add, struct leaf_cmd_tx_acknowledge, for Tx ACK commands received from leaf
devices (M32C and leafimx28).
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-6-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Set hardware timestamp on transmitted packets.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-5-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add, struct kvaser_cmd_tx_ack, for standard Tx ACK commands.

Expand kvaser_usb_hydra_ktime_from_cmd() to extract timestamps from both
standard and extended Tx ACK commands. Unsupported commands are silently
ignored, and 0 is returned.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-4-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Rename function, since this function will be used for more than just the
rx commands.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-3-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add helper function kvaser_usb_ticks_to_ktime() that converts from
device ticks to ktime.
And kvaser_usb_timestamp{48,64}_to_ktime() that converts from device
48-bit or 64-bit timestamp, to ktime.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-2-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Stefan Mätje <stefan.maetje@esd.eu> says:

The goal of this patch series is to do some cleanup
and also add the support for the one-shot mode before
the next patch introduces CAN-FD support for this
driver.

Link: https://lore.kernel.org/all/20240717214409.3934333-1-stefan.maetje@esd.euSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch adds support for one-shot mode. In this mode there happens no
automatic retransmission in the case of an arbitration lost error or on
any bus error.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://lore.kernel.org/all/20240717214409.3934333-3-stefan.maetje@esd.euSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Rename macros to use for esdACC CTRL register access to match the
internal documentation and to make the macro prefix consistent.

- ACC_CORE_OF_CTRL_MODE -> ACC_CORE_OF_CTRL
  Makes the name match the documentation.
- ACC_REG_CONTROL_MASK_MODE_ -> ACC_REG_CTRL_MASK_
  ACC_REG_CONTROL_MASK_ -> ACC_REG_CTRL_MASK_
  Makes the prefix consistent for macros describing masks in the same
  register (CTRL).
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://lore.kernel.org/all/20240717214409.3934333-2-stefan.maetje@esd.euSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The flexcan in iMX95 is not compatible with imx93 because wakeup
method is difference.

Link: https://lore.kernel.org/all/20240731-flexcan-v4-0-82ece66e5a76@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

iMX95 defines a bit in GPR that sets/unsets the IPG_STOP signal to the
FlexCAN module, controlling its entry into STOP mode. Wakeup should work
even if FlexCAN is in STOP mode.

Due to iMX95 architecture design, the A-Core cannot access GPR; only the
system manager (SM) can configure GPR. To support the wakeup feature,
follow these steps:

- For suspend:
  1) During Linux suspend, when CAN suspends, do nothing for GPR and keep
     CAN-related clocks on.
  2) In ATF, check whether CAN needs to support wakeup; if yes, send a
     request to SM through the SCMI protocol.
  3) In SM, configure the GPR and unset IPG_STOP.
  4) A-Core suspends.

- For wakeup and resume:
  1) A-Core wakeup event arrives.
  2) In SM, deassert IPG_STOP.
  3) Linux resumes.

Add a new fsl_imx95_devtype_data and FLEXCAN_QUIRK_SETUP_STOP_MODE_SCMI to
reflect this.
Reviewed-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/all/20240731-flexcan-v4-2-82ece66e5a76@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The flexcan in iMX95 is not compatible with imx93 because wakeup method is
difference. Make fsl,imx95-flexcan not fallback to fsl,imx93-flexcan.
Reviewed-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20240731-flexcan-v4-1-82ece66e5a76@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add common 'can-transceiver' children node for fsl,flexcan.

Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: can@2180000: 'can-transceiver' does not match any of the regexes: 'pinctrl-[0-9]+'
        from schema $id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20240629021754.3583641-1-Frank.Li@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Lorenzo Bianconi says:

====================
Add second QDMA support for EN7581 eth controller

EN7581 SoC supports two independent QDMA controllers to connect the
Ethernet Frame Engine (FE) to the CPU. Introduce support for the second
QDMA controller. This is a preliminary series to support multiple FE ports
(e.g. connected to a second PHY controller).

Changes since v1:
- squash patch 6/9 and 7/9
- move some duplicated code from patch 2/9 in 1/9
- cosmetics
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce support for the DSA built-in switch available on the EN7581
development board. EN7581 support is similar to MT7988 one except
it requires to set MT7530_FORCE_MODE bit in MT753X_PMCR_P register
for on cpu port.
Tested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add documentation for the built-in switch which can be found in the
Airoha EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kuniyuki Iwashima says:

====================
net: Random cleanup for netns initialisation.

patch 1 & 2 suppress unwanted memory allocation for net->gen->ptr[].

patch 3 ~ 6 move part of netns initialisation to prenet_init() that
do not require pernet_ops_rwsem.

v2:
  patch 1 : Removed Fixes: tag
  patch 2 : Use XOR for WARN_ON()

v1: https://lore.kernel.org/netdev/20240729210801.16196-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 7c3f1875 ("net: move somaxconn init from sysctl code")
introduced net_defaults_ops to make sure that net.core sysctl knobs
are always initialised even if CONFIG_SYSCTL is disabled.

Such operations better fit preinit_net() added for a similar purpose
by commit 6e77a5a4 ("net: initialize net->notrefcnt_tracker earlier").

Let's initialise the sysctl defaults in preinit_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most initialisations in setup_net() do not require pernet_ops_rwsem
and can be moved to preinit_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When initialising the root netns, we call preinit_net() under
pernet_ops_rwsem.

However, the operations in preinit_net() do not require pernet_ops_rwsem.

Also, we don't hold it for preinit_net() when initialising non-root netns.

To be consistent, let's call preinit_net() without pernet_ops_rwsem in
net_ns_init().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When initialising the root netns, we set net->passive in setup_net().

However, we do it twice for non-root netns in copy_net_ns() and
setup_net().

This is because we could bypass setup_net() in copy_net_ns() if
down_read_killable() fails.

preinit_net() is a better place to put such an operation.

Let's initialise net->passive in preinit_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can allocate per-netns memory for struct pernet_operations by specifying
id and size.

register_pernet_operations() assigns an id to pernet_operations and later
ops_init() allocates the specified size of memory as net->gen->ptr[id].

If id is missing, no memory is allocated.  If size is not specified,
pernet_operations just wastes an entry of net->gen->ptr[] for every netns.

net_generic is available only when both id and size are specified, so let's
ensure that.

While we are at it, we add const to both fields.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and
ppp parts") converted net->gen->ptr[pppol2tp_net_id] in l2tp_ppp.c to
net->gen->ptr[l2tp_net_id] in l2tp_core.c.

Now the leftover wastes one entry of net->gen->ptr[] in each netns.

Let's avoid the unwanted allocation.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The DEVID register contains two pieces of information: the device ID in
the upper nibble, and the silicon revision number in the lower nibble.
The driver should work fine with any silicon revision, so let's mask
that out in the device ID check.

Fixes: 20e6d190 ("net: pse-pd: Add TI TPS23881 PSE controller driver")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the datasheet, the VSC73xx family's maximum internal MDIO bus
speed is 20 MHz. It also allows disabling the preamble.

This commit sets the MDIO clock prescaler to the minimum value and
disables the preamble to speed up MDIO operations.

It doesn't affect the external bus because it's configured in a different
subblock.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240731203455.580262-1-paweldembicki@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

commit 3cec055c ("rxrpc: Don't hold a ref for connection workqueue")
left behind rxrpc_put_client_conn().
And commit 248f219c ("rxrpc: Rewrite the data and ack handling code")
removed rxrpc_accept_incoming_calls() but left declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240731100815.1277894-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

According to '__reuseport_alloc()', annotate flexible array member
'sock' of 'struct sock_reuseport' with '__counted_by()' and use
convenient 'struct_size()' to simplify the math used in 'kzalloc()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240801142311.42837-1-dmantipov@yandex.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Smatch reports that copying media_name and if_name to name_parts may
overwrite the destination.

 .../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16)
 .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16)

This does seem to be the case so guard against this possibility by using
strscpy() and failing if truncation occurs.

Introduced by commit b97bf3fd ("[TIPC] Initial merge")

Compile tested only.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240801-tipic-overrun-v2-1-c5b869d1f074@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Nick Child says:

====================
ibmveth RR performance

This patchset aims to increase the ibmveth drivers small packet
request response rate.

These 2 patches address:
1. NAPI rescheduling technique
2. Driver-side processing of small packets

Testing over several netperf tcp_rr connections, we saw a
30% increase in transactions per second. No regressions
were observed in other workloads.
====================

Link: https://patch.msgid.link/20240801211215.128101-1-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the length of a packet is under the rx_copybreak threshold, the
buffer is copied into a new skb and sent up the stack. This allows the
dma mapped memory to be recycled back to FW.

Previously, the reuse of the DMA space was handled immediately.
This means that further packet processing has to wait until
h_add_logical_lan finishes for this packet.

Therefore, when reusing a packet, offload the hcall to the replenish
function. As a result, much of the shared logic between the recycle and
replenish functions can be removed.

This change increases TCP_RR packet rate by another 15% (370k to 430k
txns). We can see the ftrace data supports this:
PREV: ibmveth_poll = 8078553.0 us / 190999.0 hits = AVG 42.3 us
NEW:  ibmveth_poll = 7632787.0 us / 224060.0 hits = AVG 34.07 us
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240801211215.128101-3-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the ibmveth driver processes less than the budget, it must call
napi_complete_done() to release the instance. This function will
return false if the driver should avoid rearming interrupts.
Previously, the driver was ignoring the return code of
napi_complete_done(). As a result, there were unnecessary calls to
enable the veth irq.
Therefore, use the return code napi_complete_done() to determine if
irq rearm is necessary.

Additionally, in the event that new data is received immediately after
rearming interrupts, rather than just rescheduling napi, also jump
back to the poll processing loop since we are already in the poll
function (and know that we did not expense all of budget).

This slight tweak results in a 15% increase in TCP_RR transaction rate
(320k to 370k txns). We can see the ftrace data supports this:
PREV: ibmveth_poll = 8818014.0 us / 182802.0 hits = AVG 48.24
NEW:  ibmveth_poll = 8082398.0 us / 191413.0 hits = AVG 42.22
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240801211215.128101-2-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

linkmode_andnot() simply returns the result of bitmap_andnot().
And the return type of bitmap_andnot() is bool.
So it makes sense for the return type of linkmode_andnot()
to also be bool.

I checked all call-sites and they either ignore the return
value or treat it as a bool.

Compile tested only.

Link: https://lore.kernel.org/netdev/68088998-4486-4930-90a4-96a32f08c490@lunn.ch/Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240801-linkfield-bowl-v1-1-d58f68967802@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>