This reverts commit 3873a9a4.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 01dbe712.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 96ce96f1.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit bed3db3d.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit df6deaf6.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit ddc122aa.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 58a9b5d2.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit da417885.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit ebcdc8eb.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 58a9b5d2.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 8d63ee60.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to
simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Member ec isn't used, so remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Validate the VPD checksum with pci_vpd_check_csum() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to
simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and
read the full VPD data into it.

This simplifies the code, and we no longer have to make assumptions about
VPD size.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to
simplify the code.

str_id_reg and str_id_cap hold the same string and are used in the same
comparison. This doesn't make sense, use one string str_id instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and
read the full VPD data into it.

This simplifies the code, and we no longer have to make assumptions about
VPD size.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use swab32s() instead of open-coding it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to
simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is the same as 37838aa4 "sfc: Search VPD with
pci_vpd_find_ro_info_keyword()", just for the falcon chip version.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is the same as 5119e20f "sfc: Read VPD with pci_vpd_alloc()",
just for the falcon chip version.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Refactor parsing configuration

The Spectrum ASIC has a configurable limit on how deep into the packet
it parses. By default, the limit is 96 bytes.

There are several cases where this parsing depth is not enough and there
is a need to increase it: Decapsulation of VxLAN packets and
timestamping of PTP packets.

Currently, parsing depth API is maintained as part of VxLAN module,
because the MPRS register which configures parsing depth also configures
UDP destination port number used for VxLAN encapsulation and
decapsulation.

However, in addition to two above mentioned users of this API, the
multipath hash code also needs to invoke it in order to correctly hash
based on inner fields of IPv6-in-IPv6 packets.

Upcoming support for IPv6-in-IPv6 tunneling will add another user, as
without increasing the parsing depth such packets cannot be properly
decapsulated.

Therefore, this patchset refactors the parsing configuration API and
moves it out of the VxLAN module to the main driver code.

Tested using existing selftests.

Patch set overview:

Patch #1 adds the new parsing configuration infrastructure.
Patch #2 converts existing users to the new infrastructure.
Patch #3 deletes the old infrastructure.
Patch #4 calls the new infrastructure from the multipath hash code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 01848e05 ("mlxsw: spectrum_router: Add support for inner
layer 3 multipath hash policy") and commit daeabf89 ("mlxsw:
spectrum_router: Add support for custom multipath hash policy") added
support for multipath hash policies where the hash is calculated based
on inner packet fields.

For IPv6-in-IPv6 packets, the default parsing depth (96 bytes) is not
enough when these policies are used.

Therefore, for such cases, call the new API to increase / decrease the
parsing depth as necessary. Care is taken to ensure the API is not
called multiple times.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The previous patches added new API to handle parsing depth and converted
the existing code to use it.

Remove the old infrastructure which is not needed anymore.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert VxLAN and PTP modules to increase parsing depth using new API
that was added in the previous patch.

Separate MPRS register's configuration to VxLAN related configuration
and parsing depth configuration. Handle each one using the appropriate
API.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Spectrum ASICs have a configurable limit on how deep into the packet
they parse. By default, the limit is 96 bytes.

There are several cases where this parsing depth is not enough and there
is a need to increase it. Currently, increasing parsing depth is
maintained as part of VxLAN module, because the MPRS register which
configures parsing depth also configures UDP destination port number
used for VxLAN encapsulation and decapsulation.

Add an API for increasing parsing depth as part of spectrum.c code, so
that it will be possible to use it from other modules. In addition, add
an API for setting UDP destination port and protect it using a dedicated
lock for saving parsing configurations. The lock is needed as not all
the callers hold RTNL lock.

Maintain a counter for increased parsing depth consumers. For first
consumer subscription, increase the parsing depth and for last consumer
unsubscription, set parsing depth to default value.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sunil Goutham says:

====================
octeontx2: Miscellaneous fixes

This patch series contains a bunch of miscellaneous fixes
for various issues like
- Free unallocated memory during driver unload
- HW reading transmit descriptor from wrong address
- VF VLAN strip offload MCAM entry installation failure
- Pkts not being distributed across queues in RSS context
- Wrong interface backpressure configuration for NIX1 block on 98xx
- etc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

RVU SMMU widget stores the final translated PA at
RVU_AF_SMMU_TLN_FLIT0<57:18> instead of FLIT1 register. This patch
fixes the address translation logic to use the correct register.

Fixes: 893ae972 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Otherthan setting action as RSS in NPC MCAM entry, RSS flowkey
algorithm index also needs to be set. Otherwise whatever algorithm
is defined at flowkey index '0' will be considered by HW and pkt
flows will be distributed as such.

Fix this by saving the flowkey index sent by admin function while
initializing RSS and then use it when framing MCAM rules.

Fixes: 81a43620 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whenever user changes interface MAC address both default DMAC based
MCAM rule and VLAN offload (for strip) rules are updated with new
MAC address. To update or install VLAN offload rule PF driver needs
interface's receive channel info, which is retrieved from admin
function at the time of NIXLF initialization.

If user changes MAC address before interface is UP, VLAN offload rule
installation will fail and throw error as receive channel is not valid.
To avoid this, skip VLAN offload rule installation if netdev is not UP.
This rule will anyway be reinslatted as part of open() call.

Fixes: fd9d7859 ("octeontx2-pf: Implement ingress/egress VLAN offload")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bandwidth profiles (ipolicer structure)is implemented only on CN10K
platform. But current code try to free the ipolicer memory without
checking the capibility flag leading to driver crash on OCTEONTX2
platform. This patch fixes the issue by add capability flag check.

Fixes: e8e095b3 ("octeontx2-af: cn10k: Bandwidth profiles config support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CN10K platform requires physically contiguous memory for LMTST
operations which goes beyond a single page. Not having physically
contiguous memory will result in HW fetching transmit descriptors from
a wrong memory location.

Hence use DMA_ATTR_FORCE_CONTIGUOUS attribute while allocating
LMTST regions.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch corrects the erroneous vlan priority mask field that was
send to npc_install_flow_req.

Fixes: 1d4d9e42 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Supported link modes are updated by firmware in shared
structure per interface. Kernel uses this value to display
supported link modes via ethtool.

Currently there is extra validation that firmware updated
modes are validated against internal list of supported modes.
As intenal list of supported modes are not updated frequently
new modes supported by firmware are not updated to ethtool.

Hence remove extra validation and report all firmware updated
modes.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Print debug message if any of the RVU hardware blocks
reset fails.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As per hardware the base channel number configured
for programmable channels of a block must be multiple
of number of channels of that block. This condition
is not met for SDP base channel currently. Hence this
patch ensures all the base channel numbers of all
blocks are multiple of number of channels present in
the blocks. Also instead of hardcoding SDP number
of channels the same is read from the NIX_AF_CONST1
register.

Fixes: 242da439 ("octeontx2-af: cn10k: Add support for programmable")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'bp_ena' in Aura context is NIX block index, setting it
zero will always backpressure NIX0 block, even if NIXLF
belongs to NIX1. Hence fix this by setting it appropriately
based on NIX block address.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This helps validating DTS files.

Introduced example binding changes:
1. Fixed reg formatting
2. Swapped #address-cells and #size-cells incorrect values
3. Renamed node: s/phy/ethernet-phy/
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
DSA documentation updates for v5.15

There were some documentation-visible changes made to DSA in the
net-next tree for v5.15. There may be more, but these are the ones I am
aware of.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>