- 02 Apr, 2015 40 commits
-
-
Andi Kleen authored
The perf PMI currently does unnecessary MSR accesses when LBRs are enabled. We use LBR freezing, or when in callstack mode force the LBRs to only filter on ring 3. So there is no need to disable the LBRs explicitely in the PMI handler. Also we always unnecessarily rewrite LBR_SELECT in the LBR handler, even though it can never change. 5) | /* write_msr: MSR_LBR_SELECT(1c8), value 0 */ 5) | /* read_msr: MSR_IA32_DEBUGCTLMSR(1d9), value 1801 */ 5) | /* write_msr: MSR_IA32_DEBUGCTLMSR(1d9), value 1801 */ 5) | /* write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 70000000f */ 5) | /* write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 */ 5) | /* write_msr: MSR_LBR_SELECT(1c8), value 0 */ 5) | /* read_msr: MSR_IA32_DEBUGCTLMSR(1d9), value 1801 */ 5) | /* write_msr: MSR_IA32_DEBUGCTLMSR(1d9), value 1801 */ This patch: - Avoids disabling already frozen LBRs unnecessarily in the PMI - Avoids changing LBR_SELECT in the PMI Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Link: http://lkml.kernel.org/r/1426871484-21285-1-git-send-email-andi@firstfloor.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Andi Kleen authored
Technically PEBS_ENABLED is only guaranteed to exist when we detected PEBS. So add a check for this to the PMU dump function. I don't think it can happen on a real CPU, but could in a VM. Signed-off-by:
-
Andi Kleen authored
LBRs and LBR freezing are controlled through the DEBUGCTL MSR. So dump the state of DEBUGCTL too when dumping the PMU state. Signed-off-by:
-
Andi Kleen authored
The PMU reset code didn't quite keep up with newer PMU features. Improve it a bit to really reset a modern PMU: - Clear all overflow status - Clear LBRs and freezing state - Disable fixed counters too Signed-off-by:
-
Stephane Eranian authored
This patch disables the PMU HT bug when Hyperthreading (HT) is disabled. We cannot do this test immediately when perf_events is initialized. We need to wait until the topology information is setup properly. As such, we register a later initcall, check the topology and potentially disable the workaround. To do this, we need to ensure there is no user of the PMU. At this point of the boot, the only user is the NMI watchdog, thus we disable it during the switch and re-enable it right after. Having the workaround disabled when it is not needed provides some benefits by limiting the overhead is time and space. The workaround still ensures correct scheduling of the corrupting memory events (0xd0, 0xd1, 0xd2) when HT is off. Those events can only be measured on counters 0-3. Something else the current kernel did not handle correctly. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Stephane Eranian authored
This patch adds two new functions to enable/disable the watchdog across all CPUs. This will be used by the HT PMU bug workaround code to disable/enable the NMI watchdog across quirk enablement. Signed-off-by:
-
Stephane Eranian authored
perf/x86/intel: Limit to half counters when the HT workaround is enabled, to avoid exclusive mode starvation This patch limits the number of counters available to each CPU when the HT bug workaround is enabled. This is necessary to avoid situation of counter starvation. Such can arise from configuration where one HT thread, HT0, is using all 4 counters with corrupting events which require exclusion the the sibling HT, HT1. In such case, HT1 would not be able to schedule any event until HT0 is done. To mitigate this problem, this patch artificially limits the number of counters to 2. That way, we can gurantee that at least 2 counters are not in exclusive mode and therefore allow the sibling thread to schedule events of the same type (system vs. per-thread). The 2 counters are not determined in advance. We simply set the limit to two events per HT. This helps mitigate starvation in case of events with specific counter constraints such a PREC_DIST. Note that this does not elimintate the starvation is all cases. But it is better than not having it. (Solution suggested by Peter Zjilstra.) Signed-off-by:
-
Stephane Eranian authored
With dynamic constraint, we need to restart from the static constraints each time the intel_get_event_constraints() is called. Signed-off-by:
Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: bp@alien8.de Cc: jolsa@redhat.com Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1416251225-17721-10-git-send-email-eranian@google.comSigned-off-by:
-
Maria Dimakopoulou authored
This patch modifies the PEBS constraint tables for SNB/IVB/HSW such that corrupting events supporting PEBS activate the HT workaround. Signed-off-by:
-
Maria Dimakopoulou authored
This patches activates the HT bug workaround for the SNB/IVB/HSW processors. This covers non-PEBS mode. Activation is done thru the constraint tables. Both client and server processors needs this workaround. Signed-off-by:
-
Maria Dimakopoulou authored
This patch implements a software workaround for a HW erratum on Intel SandyBridge, IvyBridge and Haswell processors with Hyperthreading enabled. The errata are documented for each processor in their respective specification update documents: - SandyBridge: BJ122 - IvyBridge: BV98 - Haswell: HSD29 The bug causes silent counter corruption across hyperthreads only when measuring certain memory events (0xd0, 0xd1, 0xd2, 0xd3). Counters measuring those events may leak counts to the sibling counter. For instance, counter 0, thread 0 measuring event 0xd0, may leak to counter 0, thread 1, regardless of the event measured there. The size of the leak is not predictible. It all depends on the workload and the state of each sibling hyper-thread. The corrupting events do undercount as a consequence of the leak. The leak is compensated automatically only when the sibling counter measures the exact same corrupting event AND the workload is on the two threads is the same. Given, there is no way to guarantee this, a work-around is necessary. Furthermore, there is a serious problem if the leaked count is added to a low-occurrence event. In that case the corruption on the low occurrence event can be very large, e.g., orders of magnitude. There is no HW or FW workaround for this problem. The bug is very easy to reproduce on a loaded system. Here is an example on a Haswell client, where CPU0, CPU4 are siblings. We load the CPUs with a simple triad app streaming large floating-point vector. We use 0x81d0 corrupting event (MEM_UOPS_RETIRED:ALL_LOADS) and 0x20cc (ROB_MISC_EVENTS:LBR_INSERTS). Given we are not using the LBR, the 0x20cc event should be zero. $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 139 277 291 r20cc 10,000969126 seconds time elapsed In this example, 0x81d0 and r20cc ar eusing sinling counters on CPU0 and CPU4. 0x81d0 leaks into 0x20cc and corrupts it from 0 to 139 millions occurrences. This patch provides a software workaround to this problem by modifying the way events are scheduled onto counters by the kernel. The patch forces cross-thread mutual exclusion between counters in case a corrupting event is measured by one of the hyper-threads. If thread 0, counter 0 is measuring event 0xd0, then nothing can be measured on counter 0, thread 1. If no corrupting event is measured on any hyper-thread, event scheduling proceeds as before. The same example run with the workaround enabled, yield the correct answer: $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 0 r20cc 10,000969126 seconds time elapsed The patch does provide correctness for all non-corrupting events. It does not "repatriate" the leaked counts back to the leaking counter. This is planned for a second patch series. This patch series makes this repatriation more easy by guaranteeing the sibling counter is not measuring any useful event. The patch introduces dynamic constraints for events. That means that events which did not have constraints, i.e., could be measured on any counters, may now be constrained to a subset of the counters depending on what is going on the sibling thread. The algorithm is similar to a cache coherency protocol. We call it XSU in reference to Exclusive, Shared, Unused, the 3 possible states of a PMU counter. As a consequence of the workaround, users may see an increased amount of event multiplexing, even in situtations where there are fewer events than counters measured on a CPU. Patch has been tested on all three impacted processors. Note that when HT is off, there is no corruption. However, the workaround is still enabled, yet not costing too much. Adding a dynamic detection of HT on turned out to be complex are requiring too much to code to be justified. This patch addresses the issue when PEBS is not used. A subsequent patch fixes the problem when PEBS is used. Signed-off-by: -
Maria Dimakopoulou authored
This patch adds a new shared_regs style structure to the per-cpu x86 state (cpuc). It is used to coordinate access between counters which must be used with exclusion across HyperThreads on Intel processors. This new struct is not needed on each PMU, thus is is allocated on demand. Signed-off-by:
-
Stephane Eranian authored
This patch adds an index parameter to the get_event_constraint() x86_pmu callback. It is expected to represent the index of the event in the cpuc->event_list[] array. When the callback is used for fake_cpuc (evnet validation), then the index must be -1. The motivation for passing the index is to use it to index into another cpuc array. Signed-off-by:
-
Maria Dimakopoulou authored
This patch adds 3 new PMU model specific callbacks during the event scheduling done by x86_schedule_events(). ->start_scheduling(): invoked when entering the schedule routine. ->stop_scheduling(): invoked at the end of the schedule routine ->commit_scheduling(): invoked for each committed event To be used optionally by model-specific code. Signed-off-by:
-
Stephane Eranian authored
Make the cpuc->kfree_on_online a vector to accommodate more than one entry and add the second entry to be used by a later patch. Signed-off-by:
-
Stephane Eranian authored
Because it will be used for more than just tracking the presence of extra registers. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Alexander Shishkin authored
Add support for Branch Trace Store (BTS) via kernel perf event infrastructure. The difference with the existing implementation of BTS support is that this one is a separate PMU that exports events' trace buffers to userspace by means of AUX area of the perf buffer, which is zero-copy mapped into userspace. The immediate benefit is that the buffer size can be much bigger, resulting in fewer interrupts and no kernel side copying is involved and little to no trace data loss. Also, kernel code can be traced with this driver. The old way of collecting BTS traces still works. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Alexander Shishkin authored
Add support for Intel Processor Trace (PT) to kernel's perf events. PT is an extension of Intel Architecture that collects information about software execuction such as control flow, execution modes and timings and formats it into highly compressed binary packets. Even being compressed, these packets are generated at hundreds of megabytes per second per core, which makes it impractical to decode them on the fly in the kernel. This driver exports trace data by through AUX space in the perf ring buffer, which is zero-copy mapped into userspace for faster data retrieval. Signed-off-by:
-
Alexander Shishkin authored
Intel PT cannot be used at the same time as LBR or BTS and will cause a general protection fault if they are used together. In order to avoid fixing up GPs in the fast path, instead we disallow creating LBR/BTS events when PT events are present and vice versa. Signed-off-by:
-
Alexander Shishkin authored
Intel Processor Trace is an architecture extension that allows for program flow tracing. Signed-off-by:
-
Alexander Shishkin authored
For counters that generate AUX data that is bound to the context of a running task, such as instruction tracing, the decoder needs to know exactly which task is running when the event is first scheduled in, before the first sched_switch. The decoder's need to know this stems from the fact that instruction flow trace decoding will almost always require program's object code in order to reconstruct said flow and for that we need at least its pid/tid in the perf stream. To single out such instruction tracing pmus, this patch introduces ITRACE PMU capability. The reason this is not part of RECORD_AUX record is that not all pmus capable of generating AUX data need this, and the opposite is *probably* also true. While sched_switch covers for most cases, there are two problems with it: the consumer will need to process events out of order (that is, having found RECORD_AUX, it will have to skip forward to the nearest sched_switch to figure out which task it was, then go back to the actual trace to decode it) and it completely misses the case when the tracing is enabled and disabled before sched_switch, for example, via PERF_EVENT_IOC_DISABLE. Signed-off-by:
-
Alexander Shishkin authored
When AUX area gets a certain amount of new data, we want to wake up userspace to collect it. This adds a new control to specify how much data will cause a wakeup. This is then passed down to pmu drivers via output handle's "wakeup" field, so that the driver can find the nearest point where it can generate an interrupt. We repurpose __reserved_2 in the event attribute for this, even though it was never checked to be zero before, aux_watermark will only matter for new AUX-aware code, so the old code should still be fine. Signed-off-by:
-
Alexander Shishkin authored
This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by:
-
Alexander Shishkin authored
For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: -
Alexander Shishkin authored
When there's new data in the AUX space, output a record indicating its offset and size and a set of flags, such as PERF_AUX_FLAG_TRUNCATED, to mean the described data was truncated to fit in the ring buffer. Signed-off-by:
-
Alexander Shishkin authored
Usually, pmus that do, for example, instruction tracing, would only ever be able to have one event per task per cpu (or per perf_event_context). For such pmus it makes sense to disallow creating conflicting events early on, so as to provide consistent behavior for the user. This patch adds a pmu capability that indicates such constraint on event creation. Signed-off-by:
-
Alexander Shishkin authored
For pmus that don't support scatter-gather for AUX data in hardware, it might still make sense to implement software double buffering to avoid losing data while the user is reading data out. For this purpose, add a pmu capability that guarantees multiple high-order chunks for AUX buffer, so that the pmu driver can do switchover tricks. To make use of this feature, add PERF_PMU_CAP_AUX_SW_DOUBLEBUF to your pmu's capability mask. This will make the ring buffer AUX allocation code ensure that the biggest high order allocation for the aux buffer pages is no bigger than half of the total requested buffer size, thus making sure that the buffer has at least two high order allocations. Signed-off-by:
-
Alexander Shishkin authored
Some pmus (such as BTS or Intel PT without multiple-entry ToPA capability) don't support scatter-gather and will prefer larger contiguous areas for their output regions. This patch adds a new pmu capability to request higher order allocations. Signed-off-by:
-
Peter Zijlstra authored
This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: -
Alexander Shishkin authored
Currently, the actual perf ring buffer is one page into the mmap area, following the user page and the userspace follows this convention. This patch adds data_{offset,size} fields to user_page that can be used by userspace instead for locating perf data in the mmap area. This is also helpful when mapping existing or shared buffers if their size is not known in advance. Right now, it is made to follow the existing convention that data_offset == PAGE_SIZE and data_offset + data_size == mmap_size. Signed-off-by: -
Andi Kleen authored
Some of the CYCLE_ACTIVITY.* events can only be scheduled on counter 2. Due to a typo Haswell matched those with INTEL_EVENT_CONSTRAINT, which lead to the events never matching as the comparison does not expect anything in the umask too. Fix the typo. Signed-off-by:
-
Kan Liang authored
For supporting Intel LBR branches filtering, Intel LBR sharing logic mechanism is introduced from commit b36817e8 ("perf/x86: Add Intel LBR sharing logic"). It modifies __intel_shared_reg_get_constraints() to config lbr_sel, which is finally used to set LBR_SELECT. However, the intel_shared_regs_constraints() function is called after intel_pebs_constraints(). The PEBS event will return immediately after intel_pebs_constraints(). So it's impossible to filter branches for PEBS events. This patch moves intel_shared_regs_constraints() ahead of intel_pebs_constraints(). We can safely do that because the intel_shared_regs_constraints() function only returns empty constraint if its rejecting the event, otherwise it returns NULL such that we continue calling intel_pebs_constraints() and x86_get_event_constraint(). Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Ingo Molnar authored
So bpf_tracing.o depends on CONFIG_BPF_SYSCALL - but that's not its only dependency, it also depends on the tracing infrastructure and on kprobes, without which it will fail to build with: In file included from kernel/trace/bpf_trace.c:14:0: kernel/trace/trace.h: In function ‘trace_test_and_set_recursion’: kernel/trace/trace.h:491:28: error: ‘struct task_struct’ has no member named ‘trace_recursion’ unsigned int val = current->trace_recursion; [...] It took quite some time to trigger this build failure, because right now BPF_SYSCALL is very obscure, depends on CONFIG_EXPERT. So also make BPF_SYSCALL more configurable, not just under CONFIG_EXPERT. If BPF_SYSCALL, tracing and kprobes are enabled then enable the bpf_tracing gateway as well. We might want to make this an interactive option later on, although I'd not complicate it unnecessarily: enabling BPF_SYSCALL is enough of an indicator that the user wants BPF support. Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: -
Alexei Starovoitov authored
One BPF program attaches to kmem_cache_alloc_node() and remembers all allocated objects in the map. Another program attaches to kmem_cache_free() and deletes corresponding object from the map. User space walks the map every second and prints any objects which are older than 1 second. Usage: $ sudo tracex4 Then start few long living processes. The 'tracex4' will print something like this: obj 0xffff880465928000 is 13sec old was allocated at ip ffffffff8105dc32 obj 0xffff88043181c280 is 13sec old was allocated at ip ffffffff8105dc32 obj 0xffff880465848000 is 8sec old was allocated at ip ffffffff8105dc32 obj 0xffff8804338bc280 is 15sec old was allocated at ip ffffffff8105dc32 $ addr2line -fispe vmlinux ffffffff8105dc32 do_fork at fork.c:1665 As soon as processes exit the memory is reclaimed and 'tracex4' prints nothing. Similar experiment can be done with the __kmalloc()/kfree() pair. Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1427312966-8434-10-git-send-email-ast@plumgrid.comSigned-off-by:
-
Alexei Starovoitov authored
BPF C program attaches to blk_mq_start_request()/blk_update_request() kprobe events to calculate IO latency. For every completed block IO event it computes the time delta in nsec and records in a histogram map: map[log10(delta)*10]++ User space reads this histogram map every 2 seconds and prints it as a 'heatmap' using gray shades of text terminal. Black spaces have many events and white spaces have very few events. Left most space is the smallest latency, right most space is the largest latency in the range. Usage: $ sudo ./tracex3 and do 'sudo dd if=/dev/sda of=/dev/null' in other terminal. Observe IO latencies and how different activity (like 'make kernel') affects it. Similar experiments can be done for network transmit latencies, syscalls, etc. '-t' flag prints the heatmap using normal ascii characters: $ sudo ./tracex3 -t heatmap of IO latency # - many events with this latency - few events |1us |10us |100us |1ms |10ms |100ms |1s |10s *ooo. *O.#. # 221 . *# . # 125 .. .o#*.. # 55 . . . . .#O # 37 .# # 175 .#*. # 37 # # 199 . . *#*. # 55 *#..* # 42 # # 266 ...***Oo#*OO**o#* . # 629 # # 271 . .#o* o.*o* # 221 . . o* *#O.. # 50 Signed-off-by: -
Alexei Starovoitov authored
this example has two probes in one C file that attach to different kprove events and use two different maps. 1st probe is x64 specific equivalent of dropmon. It attaches to kfree_skb, retrevies 'ip' address of kfree_skb() caller and counts number of packet drops at that 'ip' address. User space prints 'location - count' map every second. 2nd probe attaches to kprobe:sys_write and computes a histogram of different write sizes Usage: $ sudo tracex2 location 0xffffffff81695995 count 1 location 0xffffffff816d0da9 count 2 location 0xffffffff81695995 count 2 location 0xffffffff816d0da9 count 2 location 0xffffffff81695995 count 3 location 0xffffffff816d0da9 count 2 557145+0 records in 557145+0 records out 285258240 bytes (285 MB) copied, 1.02379 s, 279 MB/s syscall write() stats byte_size : count distribution 1 -> 1 : 3 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 2 | | 32 -> 63 : 3 | | 64 -> 127 : 1 | | 128 -> 255 : 1 | | 256 -> 511 : 0 | | 512 -> 1023 : 1118968 |************************************* | Ctrl-C at any time. Kernel will auto cleanup maps and programs $ addr2line -ape ./bld_x64/vmlinux 0xffffffff81695995 0xffffffff816d0da9 0xffffffff81695995: ./bld_x64/../net/ipv4/icmp.c:1038 0xffffffff816d0da9: ./bld_x64/../net/unix/af_unix.c:1231 Signed-off-by:
-
Alexei Starovoitov authored
tracex1_kern.c - C program compiled into BPF. It attaches to kprobe:netif_receive_skb() When skb->dev->name == "lo", it prints sample debug message into trace_pipe via bpf_trace_printk() helper function. tracex1_user.c - corresponding user space component that: - loads BPF program via bpf() syscall - opens kprobes:netif_receive_skb event via perf_event_open() syscall - attaches the program to event via ioctl(event_fd, PERF_EVENT_IOC_SET_BPF, prog_fd); - prints from trace_pipe Note, this BPF program is non-portable. It must be recompiled with current kernel headers. kprobe is not a stable ABI and BPF+kprobe scripts may no longer be meaningful when kernel internals change. No matter in what way the kernel changes, neither the kprobe, nor the BPF program can ever crash or corrupt the kernel, assuming the kprobes, perf and BPF subsystem has no bugs. The verifier will detect that the program is using bpf_trace_printk() and the kernel will print 'this is a DEBUG kernel' warning banner, which means that bpf_trace_printk() should be used for debugging of the BPF program only. Usage: $ sudo tracex1 ping-19826 [000] d.s2 63103.382648: : skb ffff880466b1ca00 len 84 ping-19826 [000] d.s2 63103.382684: : skb ffff880466b1d300 len 84 ping-19826 [000] d.s2 63104.382533: : skb ffff880466b1ca00 len 84 ping-19826 [000] d.s2 63104.382594: : skb ffff880466b1d300 len 84 Signed-off-by: -
Alexei Starovoitov authored
Debugging of BPF programs needs some form of printk from the program, so let programs call limited trace_printk() with %d %u %x %p modifiers only. Similar to kernel modules, during program load verifier checks whether program is calling bpf_trace_printk() and if so, kernel allocates trace_printk buffers and emits big 'this is debug only' banner. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1427312966-8434-6-git-send-email-ast@plumgrid.comSigned-off-by:
-
Alexei Starovoitov authored
bpf_ktime_get_ns() is used by programs to compute time delta between events or as a timestamp Signed-off-by:
-
