- 24 Jul, 2009 40 commits
-
-
Christian Lamparter authored
This patch enhances the eeprom parser to generate customized channel list for every device. Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The "what-was-I-thinking-if-anything" patch. Clearly, if cfg80211_send_disassoc() does wdev_lock() and then calls __cfg80211_send_disassoc(), the latter shouldn't lock again. And the sme_state test is ... no further comments. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Stefan Steuerwald authored
Implement set_tim callback for all rt2x00 drivers, this makes the device wake up powersaving stations properly while in AP mode. The only way to update the beacon is by simply calling mac80211 and requesting the new beacon. This means the set_tim() event is mostly the same as a beacon_done() event which was already defined in rt2x00lib. Signed-off-by:
Stefan Steuerwald <salsasepp@googlemail.com> Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Johannes Berg authored
When connected to a BSS, or joined to an IBSS, we'll want to know in userspace without using wireless extensions, so report the BSS status in the BSS list. Userspace can query the BSS list, display all the information and retrieve the station information as well. For example (from hwsim): $ iw dev wlan1 scan dump BSS 02:00:00:00:00:00 (on wlan1) -- associated freq: 2462 beacon interval: 100 capability: ESS ShortSlotTime (0x0401) signal: -50.00 dBm SSID: j Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0 DS Paramater set: channel 11 ERP: <no flags> Extended supported rates: 24.0 36.0 48.0 54.0 Signed-off-by:
-
Johannes Berg authored
Pavel reported that you can't set the SSID from "foo" to "bar". I tried reproducing, but used different values, with different lengths, and thus never saw the obvious problem. Reported-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Johannes Berg authored
This variable is only used internally, _while_ connected. If we use it, the sequence # iwconfig wlan1 essid foo <connects> # iwconfig wlan1 essid "" <disconnects> # iwconfig will still display "foo" as the SSID afterwards, which is obviously quite bogus. Fix this by only displaying the wext SSID, if present. Signed-off-by:
-
Johannes Berg authored
There's no reason to think that hwsim has any actual signal strength, but for testing it is very useful to have it report _some_ value to the stack so I can see if the value ends up being reported correctly Signed-off-by:
-
Johannes Berg authored
Instead of using the wext BSSID which may be NULL if you haven't explicitly set one, we should instead use the current_bss pointer -- if that's NULL we aren't connected anyway. Fixes missing signal quality output reported to me internally at Intel. Signed-off-by:
-
Helmut Schaa authored
In cfg80211_scan_request n_channels refers to the total number of channels to scan. Update the misleading comment accordingly. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Johannes Berg authored
1) there's a spin_lock() that needs to be spin_lock_bh() 2) action frames of size 24 might cause an out-of-bounds memory access (for the 25th byte only, so no big deal) Signed-off-by:
-
Johannes Berg authored
The cfg80211_sme_disassoc() function is already holding a lock here that cfg80211_mlme_deauth() would take, so it needs to use __cfg80211_mlme_deauth() instead. Signed-off-by:
-
Johannes Berg authored
With the recent MLME rework I accidentally removed the connection monitoring code. In order to add it back, this patch will add new code to monitor both for beacon loss and for the connection actually working, with possibly separate triggers. When no unicast frames have been received from the AP for (currently) two seconds, we will send the AP a probe request. Also, when we don't see beacons from the AP for two seconds, we do the same (but those times need not be the same due to the way the code is now written). Additionally, clean up the parameters to the ieee80211_set_disassoc() function that I need here, those are all useless except sdata. Signed-off-by:
-
Johannes Berg authored
We have, sometimes, multiple things that want to run but don't have their own timer. Introduce a new function to mac80211's mlme run_again() that makes sure that the timer will run again at the _first_ needed time, use that function and also properly reprogram the timer once it fired. Signed-off-by:
-
Reinette Chatre authored
We need to provide a reasonable minimum that will result in a working setup if used. Set minimum to be 10 to provide for 4 standard TX queues + 1 command queue + 2 (unused) HCCA queues + 4 HT queues (one per AC). We allow the user to change the number of queues used via a module parameter and use this minimum value to check if it is valid. Without this patch a user can select a value for the number of queues that will result in a failing setup. Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Reviewed-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
-
Reinette Chatre authored
* Rename maximum number of queue (TFD_QUEUE_MAX) to IWL39_NUM_QUEUES to be consistent with rest of iwlwifi. * Remove unused defines. * Fix loops that iterate over number of TX queues to stop when maximum is reached (currently it is maximum + 1). * Remove queues_num module parameter as it is not used. Signed-off-by:
-
Reinette Chatre authored
debugfs files are created with 644 permissions which gives everybody read access. This presents a security issue if a user opens the file and holds it open at the time the driver removes the file. At this point invalid memory will be accessed. Fix this by only allowing root to read debugfs files. Signed-off-by:
-
Wey-Yi Guy authored
This move the show_qos file from sysfs to debugfs because the "one value per file" sysfs rule. The file is located in /sys/kernel/debug/ieee80211/phy0/iwlagn/data Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Zhu Yi authored
This patch avoids memcpy from wdev->wext.ibss.bssid if it is NULL. This could happen if we SIOCGIWAP before SIOCSIWAP. Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Marcin Slusarz authored
Different revisions of WUSB54GC-EU use different chipsets - v2 uses rtl8187, but v3 uses Ralink RT3070. Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Przemyslaw Kulczycki <azrael@autocom.pl> Cc: John W. Linville <linville@tuxdriver.com> Cc: Linux wireless <linux-wireless@vger.kernel.org> Signed-off-by:
-
Johannes Berg authored
This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by:
-
Johannes Berg authored
We will soon want to nest key attributes into some new attribute for configuring static WEP keys at connect() and ibss_join() time, so we need nested attributes for that. However, key attributes right now are 'global'. This patch thus introduces new nested attributes for the key settings and functions for parsing them. Signed-off-by:
-
Javier Cardona authored
Assign next hop address to pending mesh frames once the path is resolved. Regression. Frames transmitted when a mesh path was wating to be resolved were being transmitted with an invalid Receiver Address. [Changes since v1] Suggested by Johannes: - Improved frame_queue traversal - Narower RCU scope Signed-off-by:
Javier Cardona <javier@cozybit.com> Signed-off-by:
Andrey Yurovsky <andrey@cozybit.com> Signed-off-by:
-
Johannes Berg authored
This fixes two small bugs: 1) the connect variable is already initialised, and the assignment to auth_type overwrites the previous setting with a wrong value 2) when all authentication attempts fail, we need to report that we couldn't connect Signed-off-by: -
Johannes Berg authored
cfg80211_wext_giwrate doesn't lock the wdev, so it cannot access current_bss race-free. Also, there's little point in trying to ask the driver for an AP that it never told us about, so avoid that case. Signed-off-by:
-
Christian Lamparter authored
This patch re-enables p54's power save features and adds a workaround which temporarily alters the device's power state in order to allow ps-polls to be sent and buffered data to be retrieved during psm. (Incorporates patch originally posted as "p54: fix beacon template dtim IE corruption". -- JWL) Signed-off-by:
-
Johannes Berg authored
This makes mac80211 use the event tracing framework to log all operations as given to the driver. This will need to be extended with more information, but as a start it should be good. Signed-off-by:
-
Johannes Berg authored
ieee80211_testmode_cmd can very well be static. Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/wireless/iwmc3200wifi/netdev.c net/wireless/scan.c
-
Dave Jones authored
Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dave Jones authored
By moving functions to before their first call, we eliminate the need to define forward references. Signed-off-by:
-
Dave Jones authored
Signed-off-by:
-
Dave Jones authored
This code hasn't been enabled in forever. Signed-off-by:
-
Andi Kleen authored
While looking for something else I spent some time adding one liner comments to the tcp_output.c functions that didn't have any. That makes the comments more consistent. I hope I documented everything right. No code changes. v2: Incorporated feedback from Ilpo. v3: Change style of one liner comments, add a few more comments. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Eric Dumazet authored
Some style cleanups to match current code practices. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
A pointer to mac_sonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Various other functions that are called by mac_sonic_probe need to move to .devinit.text, too. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Jeff Garzik <jgarzik@redhat.com> Cc: David S. Miller <davem@davemloft.net> Tested-by:
Finn Thain <fthain@telegraphics.com.au> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Uwe Kleine-König authored
A pointer to xtsonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
-
Uwe Kleine-König authored
A pointer to sbmac_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: netdev@vger.kernel.org Signed-off-by:
-
Uwe Kleine-König authored
A pointer to meth_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Uwe Kleine-König authored
A pointer to jazz_sonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. As noticed by Geert Uytterhoeven sonic_probe1 is called by jazz_sonic_probe, so the former has to move to .devinit.text, too. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
-
Uwe Kleine-König authored
A pointer to sgiseeq_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
-
