The driver can match either via OF or ACPI ID tables.  If one
configuration is disabled, the table will be unused:

    drivers/nfc/st95hf/core.c:1059:34: warning:
        ‘st95hf_spi_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-12-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver can match either via OF or ACPI ID tables.  If one
configuration is disabled, the table will be unused:

    drivers/nfc/st21nfca/i2c.c:593:34: warning:
        ‘of_st21nfca_i2c_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-11-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver can match either via OF or ACPI ID tables.  If one
configuration is disabled, the table will be unused:

    drivers/nfc/st-nci/spi.c:296:34: warning:
        ‘of_st_nci_spi_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-10-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver can match either via OF or ACPI ID tables.  If one
configuration is disabled, the table will be unused:

    drivers/nfc/pn544/i2c.c:53:36: warning:
        ‘pn544_hci_i2c_acpi_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-9-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver can match either via OF or I2C ID tables.  If OF is disabled,
the table will be unused:

    drivers/nfc/s3fwrn5/i2c.c:265:34: warning:
        ‘of_s3fwrn5_i2c_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-8-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver can match either via OF or I2C ID tables.  If OF is disabled,
the table will be unused:

    drivers/nfc/pn533/i2c.c:252:34: warning:
        ‘of_pn533_i2c_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-7-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The nci_ctrl_hdr.plen field us u8, so checkign if it is bigger than
NCI_MAX_PAYLOAD_SIZE does not make any sense.  Fix warning reported by
Smatch:

    drivers/nfc/nfcmrvl/i2c.c:52 nfcmrvl_i2c_read() warn:
        impossible condition '(nci_hdr.plen > 255) => (0-255 > 255)'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-6-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver can match either via OF or I2C ID tables.  If OF is disabled,
the table will be unused:

    drivers/nfc/nfcmrvl/spi.c:199:34: warning:
        ‘of_nfcmrvl_spi_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-5-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here).  This
fixes compile warning (!CONFIG_OF):

    drivers/nfc/pn533/i2c.c:252:34: warning:
      ‘of_pn533_i2c_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-4-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The port100_in_rf_setting structure does not contain valid kerneldoc
docummentation, unlike the port100_tg_rf_setting structure.  Correct the
kerneldoc to fix W=1 warnings:

    warning: This comment starts with '/**', but isn't a kernel-doc comment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-3-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver can match only via the ACPI ID table so the table should be
always used and the ACPI_PTR does not have any sense.  This fixes fixes
compile warning (!CONFIG_ACPI):

    drivers/nfc/fdp/i2c.c:362:36: warning:
        ‘fdp_nci_i2c_acpi_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-2-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since structure comments are not kerneldoc, remove the double ** to fix
W=1 warnings:

    warning: This comment starts with '/**', but isn't a kernel-doc comment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-1-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce k parameter in pktgen samples in order to toggle UDP tx
checksum
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/cf16417902062c6ea2fd3c79e00510e36a40c31a.1622210713.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Peng Li says:

====================
net: hdlc_fr: clean up some code style issues

V1 -> V2:
1, Use appropriate commit prefix suggested by Jakub Kicinski,
   replace commit prefix "net: wan" by "net: hdlc_fr".
====================

Link: https://lore.kernel.org/r/1622160769-6678-1-git-send-email-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch removes redundant braces {}, to fix the
checkpatch.pl warning:
"braces {} are not necessary for any arm of this statement"
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Braces {} should be used on all arms of this statement.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

According to the chackpatch.pl, space prohibited after that '!'.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Code indent should use tabs where possible.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add spaces required after that close brace '}'.
Add spaces required before the open parenthesis '('.
Add spaces required after that ','.
Add spaces required around that '='.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix the checkpatch error as "foo* bar" and should be "foo *bar",
and "(foo*)" should be "(foo *)".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: Miscellaneous cleanup

Here are some cleanup patches we've collected in the MPTCP tree.

Patches 1-4 do some general tidying.

Patch 5 adds an explicit check at netlink command parsing time to
require a port number when the 'signal' flag is set, to catch the error
earlier.

Patches 6 & 7 fix up the MPTCP 'enabled' sysctl, enforcing it as a
boolean value, and ensuring that the !CONFIG_SYSCTL build still works
after the boolean change.
====================

Link: https://lore.kernel.org/r/20210527235430.183465-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

To avoid confusions, it seems better to parse this sysctl parameter as a
boolean. We use it as a boolean, no need to parse an integer and bring
confusions if we see a value different from 0 and 1, especially with
this parameter name: enabled.

It seems fine to do this modification because the default value is 1
(enabled). Then the only other interesting value to set is 0 (disabled).
All other values would not have changed the default behaviour.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since the introduction of the sysctl support in MPTCP with
commit 784325e9 ("mptcp: new sysctl to control the activation per NS"),
we don't check CONFIG_SYSCTL.

Until now, that was not an issue: the register and unregister functions
were replaced by NO-OP one if SYSCTL was not enabled in the config. The
only thing we could have avoid is not to reserve memory for the table
but that's for the moment only a small table per net-ns.

But the following commit is going to use SYSCTL_ZERO and SYSCTL_ONE
which are not be defined if SYSCTL is not enabled in the config. This
causes 'undefined reference' errors from the linker.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When add address with port, it is mean to create a listening socket,
and send an ADD_ADDR to remote, so it must have flag signal set,
add this check in mptcp_pm_parse_addr().

Fixes: a77e9179 ("mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlink")
Acked-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Memory of struct pm_nl_pernet{} is allocated by kzalloc()
in setup_net()->ops_init(), so it's no need to reset counters
and zero bitmap in pm_nl_init_net().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(),
the mptcp_finish_join() may return false in some cases, and send a RESET
to remote, and no local hmac is required.
So generate subflow hmac after mptcp_finish_join().

Fixes: ec3edaa7 ("mptcp: Add handling of outgoing MP_JOIN requests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We have macro TOKEN_MAX_RETRIES for the number of token generate retries,
so using TOKEN_MAX_RETRIES in subflow_check_req().

And rename TOKEN_MAX_RETRIES to MPTCP_TOKEN_MAX_RETRIES as it is now
exposed.

Fixes: 535fb815 ("mptcp: token: move retry to caller")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After commit 2c5ebd00 ("mptcp: refactor token container"),
pr_debug() is called before mptcp_crypto_key_gen_sha() in
mptcp_token_new_connect(), so the output local_key, token and
idsn are 0, like:

  MPTCP: ssk=00000000f6b3c4a2, local_key=0, token=0, idsn=0

Move pr_debug() after mptcp_crypto_key_gen_sha().

Fixes: 2c5ebd00 ("mptcp: refactor token container")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5-updates-2021-05-26

Misc update for mlx5 driver,

1) Clean up patches for lag and SF

2) Reserve bit 31 in steering register C1 for IPSec offload usage

3) Move steering tables pool logic into the steering core and
  increase the maximum table size to 2G entries when software steering
  is enabled.

* tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Fix lag port remapping logic
  net/mlx5: Use boolean arithmetic to evaluate roce_lag
  net/mlx5: Remove unnecessary spin lock protection
  net/mlx5: Cap the maximum flow group size to 16M entries
  net/mlx5: DR, Set max table size to 2G entries
  net/mlx5: Move chains ft pool to be used by all firmware steering
  net/mlx5: Move table size calculation to steering cmd layer
  net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE
  net/mlx5: DR, Remove unused field of send_ring struct
  net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling
  net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
  net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload
  net/mlx5e: TC: Use bit counts for register mapping
  net/mlx5: CT: Avoid reusing modify header context for natted entries
  net/mlx5e: CT, Remove newline from ct_dbg call
====================

Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Replace union with a couple of pointers in order to fix the following
out-of-bounds warning:

  CC [M]  drivers/net/ethernet/intel/ixgbe/ixgbe_common.o
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c: In function ‘ixgbe_host_interface_command’:
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3729:13: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
 3729 |   bp->u32arr[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
      |   ~~~~~~~~~~^~~~
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3682:7: note: while referencing ‘u32arr’
 3682 |   u32 u32arr[1];
      |       ^~~~~~

This helps with the ongoing efforts to globally enable -Warray-bounds.

Link: https://github.com/KSPP/linux/issues/109Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20210527173424.362456-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Gatis Peisenieks says:

====================
add 4 RX/TX queue support for Mikrotik 10/25G NIC

More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance.
This patch set adds support for 4 RX/TX queues available on
Mikrotik 10/25G NIC.

v4:
    - addressed comments from Jakub Kicinski:
      - split up the change in more manageable chunks
      - changed member order in structs for tighter packing
      - fixed style issues
    - reverted to calling napi_alloc_skb only from within poll
      as before
v3:
    - fix kernel-doc complaints on comments as pointed out by
      David Miller
v2:
    - rebase on net-next master as requested by David Miller
====================

Link: https://lore.kernel.org/r/20210527144423.3395719-1-gatis@mikrotik.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance. The new
Mikrotik 10/25G NIC supports 4 RX and 4 TX queues. TX queues are
treated with equal priority. RX queue balancing is fixed based on
L2/L3/L4 hash.

This adds support for 4 RX/TX queues while maintaining backwards
compatibility with older hardware.

Simultaneous TX + RX performance on AMD Threadripper 3960X
with Mikrotik 10/25G NIC improved from 1.6Mpps to 3.2Mpps per port.

Backwards compatiblitiy was verified with AR8151 and AR8131 based
NICs.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move napi and other per queue members into per rx queue struct.
Allocate max rx queues that any hw supported by the driver might have.
Patch that actually enables multiple rx queues will follow.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To get more performance from using multiple tx queues one needs
a per tx queue napi.

Move tx napi from per adapter struct into per tx queue struct.
Patch that actually enables multiple tx queues will follow.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To support NICs that allow for more than one tx queue it is
required to detect NIC type early during probe. This is moves
NIC type detection before netdev_alloc to prepare for that.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Jiri Pirko says:

====================
mlx*: devlink dev info versions adjustments

Couple of adjustments in Mellanox drivers regarding devlink dev
versions fill-up.
====================

Link: https://lore.kernel.org/r/20210526104509.761807-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>