- 15 Aug, 2015 7 commits
-
-
Viresh Kumar authored
policy->max is the maximum allowed frequency defined by user and clipped_freq is the maximum that thermal constraints allow. If clipped_freq is lower than policy->max, then we need to readjust policy->max. But, if clipped_freq is greater than policy->max, we don't need to do anything. We used to call cpufreq_verify_within_limits() in this case, but it doesn't change anything in this case. Lets skip this unnecessary call and write a comment that explains this. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-
Viresh Kumar authored
That's what it is for, lets name it properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-
Viresh Kumar authored
That's what it is for, lets name it properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-
Viresh Kumar authored
We just need to take care of single event here and there is no need to increase indentation level of most of the code (which causes lines longer that 80 columns to break). Kill the switch block. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-
Viresh Kumar authored
If a valid cpufreq_dev is found for policy->cpu, we should update the policy and quit the for loop. There is no need to keep traversing the list of cpufreq_dev's. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-
Viresh Kumar authored
Its always set before getting used, don't initialize it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-
Russell King authored
A recent change to the cpu_cooling code introduced a AB-BA deadlock scenario between the cpufreq_policy_notifier_list rwsem and the cooling_cpufreq_lock. This is caused by cooling_cpufreq_lock being held before the registration/removal of the notifier block (an operation which takes the rwsem), and the notifier code itself which takes the locks in the reverse order: ====================================================== [ INFO: possible circular locking dependency detected ] 3.18.0+ #1453 Not tainted ------------------------------------------------------- rc.local/770 is trying to acquire lock: (cooling_cpufreq_lock){+.+.+.}, at: [<c04abfc4>] cpufreq_thermal_notifier+0x34/0xfc but task is already holding lock: ((cpufreq_policy_notifier_list).rwsem){++++.+}, at: [<c0042f04>] __blocking_notifier_call_chain+0x34/0x68 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((cpufreq_policy_notifier_list).rwsem){++++.+}: [<c06bc3b0>] down_write+0x44/0x9c [<c0043444>] blocking_notifier_chain_register+0x28/0xd8 [<c04ad610>] cpufreq_register_notifier+0x68/0x90 [<c04abe4c>] __cpufreq_cooling_register.part.1+0x120/0x180 [<c04abf44>] __cpufreq_cooling_register+0x98/0xa4 [<c04abf8c>] cpufreq_cooling_register+0x18/0x1c [<bf0046f8>] imx_thermal_probe+0x1c0/0x470 [imx_thermal] [<c037cef8>] platform_drv_probe+0x50/0xac [<c037b710>] driver_probe_device+0x114/0x234 [<c037b8cc>] __driver_attach+0x9c/0xa0 [<c0379d68>] bus_for_each_dev+0x5c/0x90 [<c037b204>] driver_attach+0x24/0x28 [<c037ae7c>] bus_add_driver+0xe0/0x1d8 [<c037c0cc>] driver_register+0x80/0xfc [<c037cd80>] __platform_driver_register+0x50/0x64 [<bf007018>] 0xbf007018 [<c0008a5c>] do_one_initcall+0x88/0x1d8 [<c0095da4>] load_module+0x1768/0x1ef8 [<c0096614>] SyS_init_module+0xe0/0xf4 [<c000ec00>] ret_fast_syscall+0x0/0x48 -> #0 (cooling_cpufreq_lock){+.+.+.}: [<c00619f8>] lock_acquire+0xb0/0x124 [<c06ba3b4>] mutex_lock_nested+0x5c/0x3d8 [<c04abfc4>] cpufreq_thermal_notifier+0x34/0xfc [<c0042bf4>] notifier_call_chain+0x4c/0x8c [<c0042f20>] __blocking_notifier_call_chain+0x50/0x68 [<c0042f58>] blocking_notifier_call_chain+0x20/0x28 [<c04ae62c>] cpufreq_set_policy+0x7c/0x1d0 [<c04af3cc>] store_scaling_governor+0x74/0x9c [<c04ad418>] store+0x90/0xc0 [<c0175384>] sysfs_kf_write+0x54/0x58 [<c01746b4>] kernfs_fop_write+0xdc/0x190 [<c010dcc0>] vfs_write+0xac/0x1b4 [<c010dfec>] SyS_write+0x44/0x90 [<c000ec00>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((cpufreq_policy_notifier_list).rwsem); lock(cooling_cpufreq_lock); lock((cpufreq_policy_notifier_list).rwsem); lock(cooling_cpufreq_lock); *** DEADLOCK *** 7 locks held by rc.local/770: #0: (sb_writers#6){.+.+.+}, at: [<c010dda0>] vfs_write+0x18c/0x1b4 #1: (&of->mutex){+.+.+.}, at: [<c0174678>] kernfs_fop_write+0xa0/0x190 #2: (s_active#52){.+.+.+}, at: [<c0174680>] kernfs_fop_write+0xa8/0x190 #3: (cpu_hotplug.lock){++++++}, at: [<c0026a60>] get_online_cpus+0x34/0x90 #4: (cpufreq_rwsem){.+.+.+}, at: [<c04ad3e0>] store+0x58/0xc0 #5: (&policy->rwsem){+.+.+.}, at: [<c04ad3f8>] store+0x70/0xc0 #6: ((cpufreq_policy_notifier_list).rwsem){++++.+}, at: [<c0042f04>] __blocking_notifier_call_chain+0x34/0x68 stack backtrace: CPU: 0 PID: 770 Comm: rc.local Not tainted 3.18.0+ #1453 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c00121c8>] (dump_backtrace) from [<c0012360>] (show_stack+0x18/0x1c) r6:c0b85a80 r5:c0b75630 r4:00000000 r3:00000000 [<c0012348>] (show_stack) from [<c06b6c48>] (dump_stack+0x7c/0x98) [<c06b6bcc>] (dump_stack) from [<c06b42a4>] (print_circular_bug+0x28c/0x2d8) r4:c0b85a80 r3:d0071d40 [<c06b4018>] (print_circular_bug) from [<c00613b0>] (__lock_acquire+0x1acc/0x1bb0) r10:c0b50660 r8:c09e6d80 r7:d0071d40 r6:c11d0f0c r5:00000007 r4:d0072240 [<c005f8e4>] (__lock_acquire) from [<c00619f8>] (lock_acquire+0xb0/0x124) r10:00000000 r9:c04abfc4 r8:00000000 r7:00000000 r6:00000000 r5:c0a06f0c r4:00000000 [<c0061948>] (lock_acquire) from [<c06ba3b4>] (mutex_lock_nested+0x5c/0x3d8) r10:ec853800 r9:c0a06ed4 r8:d0071d40 r7:c0a06ed4 r6:c11d0f0c r5:00000000 r4:c04abfc4 [<c06ba358>] (mutex_lock_nested) from [<c04abfc4>] (cpufreq_thermal_notifier+0x34/0xfc) r10:ec853800 r9:ec85380c r8:d00d7d3c r7:c0a06ed4 r6:d00d7d3c r5:00000000 r4:fffffffe [<c04abf90>] (cpufreq_thermal_notifier) from [<c0042bf4>] (notifier_call_chain+0x4c/0x8c) r7:00000000 r6:00000000 r5:00000000 r4:fffffffe [<c0042ba8>] (notifier_call_chain) from [<c0042f20>] (__blocking_notifier_call_chain+0x50/0x68) r8:c0a072a4 r7:00000000 r6:d00d7d3c r5:ffffffff r4:c0a06fc8 r3:ffffffff [<c0042ed0>] (__blocking_notifier_call_chain) from [<c0042f58>] (blocking_notifier_call_chain+0x20/0x28) r7:ec98b540 r6:c13ebc80 r5:ed76e600 r4:d00d7d3c [<c0042f38>] (blocking_notifier_call_chain) from [<c04ae62c>] (cpufreq_set_policy+0x7c/0x1d0) [<c04ae5b0>] (cpufreq_set_policy) from [<c04af3cc>] (store_scaling_governor+0x74/0x9c) r7:ec98b540 r6:0000000c r5:ec98b540 r4:ed76e600 [<c04af358>] (store_scaling_governor) from [<c04ad418>] (store+0x90/0xc0) r6:0000000c r5:ed76e6d4 r4:ed76e600 [<c04ad388>] (store) from [<c0175384>] (sysfs_kf_write+0x54/0x58) r8:0000000c r7:d00d7f78 r6:ec98b540 r5:0000000c r4:ec853800 r3:0000000c [<c0175330>] (sysfs_kf_write) from [<c01746b4>] (kernfs_fop_write+0xdc/0x190) r6:ec98b540 r5:00000000 r4:00000000 r3:c0175330 [<c01745d8>] (kernfs_fop_write) from [<c010dcc0>] (vfs_write+0xac/0x1b4) r10:0162aa70 r9:d00d6000 r8:0000000c r7:d00d7f78 r6:0162aa70 r5:0000000c r4:eccde500 [<c010dc14>] (vfs_write) from [<c010dfec>] (SyS_write+0x44/0x90) r10:0162aa70 r8:0000000c r7:eccde500 r6:eccde500 r5:00000000 r4:00000000 [<c010dfa8>] (SyS_write) from [<c000ec00>] (ret_fast_syscall+0x0/0x48) r10:00000000 r8:c000edc4 r7:00000004 r6:000216cc r5:0000000c r4:0162aa70 Solve this by moving to finer grained locking - use one mutex to protect the cpufreq_dev_list as a whole, and a separate lock to ensure correct ordering of cpufreq notifier registration and removal. cooling_list_lock is taken within cooling_cpufreq_lock on (un)registration to preserve the behavior of the code, i.e. to atomically add/remove to the list and (un)register the notifier. Fixes: 2dcd851f ("thermal: cpu_cooling: Update always cpufreq policy with Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-
- 14 Aug, 2015 1 commit
-
-
Dmitry Torokhov authored
The code in question is called outside of standard driver probe()/remove() callbacks and thus will not benefit from use of devm* infrastructure. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-
- 13 Aug, 2015 9 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Another few small ARM fixes, mostly addressing some VDSO issues" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8410/1: VDSO: fix coarse clock monotonicity regression ARM: 8409/1: Mark ret_fast_syscall as a function ARM: 8408/1: Fix the secondary_startup function in Big Endian case ARM: 8405/1: VDSO: fix regression with toolchains lacking ld.bfd executable
-
Linus Torvalds authored
Commit 3f5159a9 ("x86/asm/entry/32: Update -ENOSYS handling to match the 64-bit logic") broke the ENOSYS handling for the 32-bit compat case. The proper error return value was never loaded into %rax, except if things just happened to go through the audit paths, which ended up reloading the return value. This moves the loading or %rax into the normal system call path, just to make sure the error case triggers it. It's kind of sad, since it adds a useless instruction to reload the register to the fast path, but it's not like that single load from the stack is going to be noticeable. Reported-by: David Drysdale <drysdale@google.com> Tested-by: Kees Cook <keescook@chromium.org> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: - two stable fixes for corruption seen in a snapshot of thinp metadata; metadata snapshots aren't widely used but help provide a consistent view of the metadata associated with an active thin-pool. - a dm-cache fix for the 4.2 "default" policy switch from "mq" to "smq" * tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache policy smq: move 'dm-cache-default' module alias to SMQ dm btree: add ref counting ops for the leaves of top level btrees dm thin metadata: delete btrees when releasing metadata snapshot
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull xen block driver fixes from Jens Axboe: "A few small bug fixes for xen-blk{front,back} that have been sitting over my vacation" * 'for-linus' of git://git.kernel.dk/linux-block: xen-blkback: replace work_pending with work_busy in purge_persistent_gnt() xen-blkfront: don't add indirect pages to list when !feature_persistent xen-blkfront: introduce blkfront_gather_backend_features()
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen bug fixes from David Vrabel: - revert a fix from 4.2-rc5 that was causing lots of WARNING spam. - fix a memory leak affecting backends in HVM guests. - fix PV domU hang with certain configurations. * tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Don't leak memory when unmapping the ring on HVM backend Revert "xen/events/fifo: Handle linked events when closing a port" x86/xen: build "Xen PV" APIC driver for domU as well
-
Linus Torvalds authored
This reverts commits 9a036b93 ("x86/signal/64: Remove 'fs' and 'gs' from sigcontext") and c6f20629 ("x86/signal/64: Fix SS handling for signals delivered to 64-bit programs"). They were cleanups, but they break dosemu by changing the signal return behavior (and removing 'fs' and 'gs' from the sigcontext struct - while not actually changing any behavior - causes build problems). Reported-and-tested-by: Stas Sergeev <stsp@list.ru> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Workaround hw bug when acquiring PCI bos ownership of iwlwifi devices, from Emmanuel Grumbach. 2) Falling back to vmalloc in conntrack should not emit a warning, from Pablo Neira Ayuso. 3) Fix NULL deref when rtlwifi driver is used as an AP, from Luis Felipe Dominguez Vega. 4) Rocker doesn't free netdev on device removal, from Ido Schimmel. 5) UDP multicast early sock demux has route handling races, from Eric Dumazet. 6) Fix L4 checksum handling in openvswitch, from Glenn Griffin. 7) Fix use-after-free in skb_set_peeked, from Herbert Xu. 8) Don't advertize NETIF_F_FRAGLIST in virtio_net driver, this can lead to fraglists longer than the driver can support. From Jason Wang. 9) Fix mlx5 on non-4k-pagesize systems, from Carol L Soto. 10) Fix interrupt storm in bna driver, from Ivan Vecera. 11) Don't propagate -EBUSY from netlink_insert(), from Daniel Borkmann. 12) Fix inet request sock leak, from Eric Dumazet. 13) Fix TX interrupt masking and marking in TX descriptors of fs_enet driver, from LEROY Christophe. 14) Get rid of rule optimizer in gianfar driver, it's buggy and unlikely to get fixed any time soon. From Jakub Kicinski * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) cosa: missing error code on failure in probe() gianfar: remove faulty filer optimizer gianfar: correct list membership accounting gianfar: correct filer table writing bonding: Gratuitous ARP gets dropped when first slave added net: dsa: Do not override PHY interface if already configured net: fs_enet: mask interrupts for TX partial frames. net: fs_enet: explicitly remove I flag on TX partial frames inet: fix possible request socket leak inet: fix races with reqsk timers mkiss: Fix error handling in mkiss_open() bnx2x: Free NVRAM lock at end of each page bnx2x: Prevent null pointer dereference on SKB release cxgb4: missing curly braces in t4_setup_debugfs() net-timestamp: Update skb_complete_tx_timestamp comment ipv6: don't reject link-local nexthop on other interface netlink: make sure -EBUSY won't escape from netlink_insert bna: fix interrupts storm caused by erroneous packets net: mvpp2: replace TX coalescing interrupts with hrtimer net: mvpp2: enable proper per-CPU TX buffers unmapping ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "A ppc4xx_edac fix for accessing ->csrows properly. This driver was missed during the conversion a couple of years ago" * tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, ppc4xx: Access mci->csrows array elements properly
-
Michael Walle authored
The commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by: Michael Walle <michael@walle.cc> Cc: <stable@vger.kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.ccSigned-off-by: Borislav Petkov <bp@suse.de>
-
- 12 Aug, 2015 16 commits
-
-
Dan Carpenter authored
If register_hdlc_device() fails, the current code returns 0 but we should return an error code instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== gianfar: filer changes respinning with examples as requested. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Current filer rule optimization is broken in several ways: (1) Can perform reads/writes beyond end of allocated tables. (gianfar_ethtool.c:1326). (2) It breaks badly for rules with more than 2 specifiers (e.g. matching ip, port, tos). Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: TOS == 00000003 AND Q:00 ctrl:0000008a prop:00000003 05: DIA == 0a000003 AND Q:11 ctrl:0000448c prop:0a000003 06: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 07: TOS == 00000002 AND Q:00 ctrl:0000008a prop:00000002 08: DIA == 0a000002 AND Q:09 ctrl:0000248c prop:0a000002 09: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 0a: DPT == 00000001 AND Q:00 ctrl:0000008e prop:00000001 0b: TOS == 00000001 CLE Q:01 ctrl:0000060a prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 (Entire cluster gets AND-ed together). (3) We observed that the masking rules it generates do not play well with clustering on P2020. Only first rule of the cluster would ever fire. Given that optimizer relies heavily on masking this is very hard to fix. Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: DIA == 0a000003 Q:11 ctrl:0000440c prop:0a000003 05: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 06: DIA == 0a000002 Q:09 ctrl:0000240c prop:0a000002 07: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 08: DPT == 00000001 CLE Q:01 ctrl:0000060e prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 Which looks correct according to the spec but only the first (eth id 252)/last added rule for 10.0.0.3 will ever trigger. As if filer did not treat the AND CLE as cluster start but also kept AND-ing the rules. We found no errata covering this. The fact that nobody noticed (2) or (3) makes me think that this feature is not very widely used and we should just remove it. Reported-by: Aleksander Dutkowski <adutkowski@gmail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
At a cost of one line let's make sure .count is correct when calling gfar_process_filer_changes(). Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
MAX_FILER_IDX is the last usable index. Using less-than will already guarantee that one entry for catch-all rule will be left, no need to subtract 1 here. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Venkat Venkatsubra authored
When the first slave is added (such as during bootup) the first gratuitous ARP gets dropped. We don't see this drop during a failover. The packet gets dropped in qdisc (noop_enqueue). The fix is to delay the sending of gratuitous ARPs till the bond dev's carrier is present. It can also be worked around by setting num_grat_arp to more than 1. Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In case we need to divert reads/writes using the slave MII bus, we may have already fetched a valid PHY interface property from Device Tree, and that mode is used by the PHY driver to make configuration decisions. If we could not fetch the "phy-mode" property, we will assign p->phy_interface to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as to whether or not we should override the interface value. Fixes: 19334920 ("net: dsa: Set valid phy interface type") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Fix coarse clock monotonicity (VDSO timestamp off by one jiffy compared to the syscall one)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: VDSO: fix coarse clock monotonicity regression
-
git://people.freedesktop.org/~agd5f/linuxLinus Torvalds authored
Pull amd drm fixes from Alex Deucher: "Dave is on vacation at the moment, so please pull these radeon and amdgpu fixes directly. Just a few minor things for 4.2: - add a new radeon pci id - fix a power management regression in amdgpu - fix HEVC command buffer validation in amdgpu" * 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add new OLAND pci id Revert "drm/amdgpu: Configure doorbell to maximum slots" drm/amdgpu: add context buffer size check for HEVC
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
This reverts commit 78ad5cdd. This commit breaks dpm and suspend/resume on CZ.
-
Boyuan Zhang authored
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fix from Mark Brown: "regmap: Fix handling of present bits on rbtree cache block resize When expanding a cache block we use krealloc() to resize the register present bitmap without initialising the newly allocated data (the original code was written for kzalloc()). Add an appropraite memset() to fix that" * tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: regcache-rbtree: Clean new present bits on present bitmap resize
-
Yi Zhang authored
When creating dm-cache with the default policy, it will call request_module("dm-cache-default") to register the default policy. But the "dm-cache-default" alias was left referring to the MQ policy. Fix this by moving the module alias to SMQ. Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq) Signed-off-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Joe Thornber authored
When using nested btrees, the top leaves of the top levels contain block addresses for the root of the next tree down. If we shadow a shared leaf node the leaf values (sub tree roots) should be incremented accordingly. This is only an issue if there is metadata sharing in the top levels. Which only occurs if metadata snapshots are being used (as is possible with dm-thinp). And could result in a block from the thinp metadata snap being reused early, thus corrupting the thinp metadata snap. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
Joe Thornber authored
The device details and mapping trees were just being decremented before. Now btree_del() is called to do a deep delete. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
- 11 Aug, 2015 7 commits
-
-
Linus Torvalds authored
Merge tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig Pull localmodconfig fix from Steven Rostedt: "Leonidas Spyropoulos found that modules like nouveau were being unselected by make localmodconfig even though their configs were set and the module was loaded and visible by lsmod. The reason for this was because streamline-config.pl only looks at Makefiles, and not Kbuild files. As these modules use Kbuild for their names, they too need to be checked by localmodconfig. This was fixed by Richard Weinberger" * tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig: localmodconfig: Use Kbuild files too
-
Richard Weinberger authored
In kbuild it is allowed to define objects in files named "Makefile" and "Kbuild". Currently localmodconfig reads objects only from "Makefile"s and misses modules like nouveau. Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at Cc: stable@vger.kernel.org Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2015-08-11 Here's an important regression fix for the 4.2-rc series that ensures user space isn't given invalid LTK values. The bug essentially prevents the encryption of subsequent LE connections, i.e. makes it impossible to pair devices over LE. Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
LEROY Christophe authored
We are not interested in interrupts for partially transmitted frames. Unlike SCC and FCC, the FEC doesn't handle the I bit in buffer descriptors, instead it defines two interrupt bits, TXB and TXF. We have to mask TXB in order to only get interrupts once the frame is fully transmitted. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
LEROY Christophe authored
We are not interested in interrupts for partially transmitted frames, we have to clear BD_ENET_TX_INTR explicitly otherwise it may remain from a previously used descriptor. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxLinus Torvalds authored
Pull fbdev fixes from Tomi Valkeinen: - fix display regression on Versatile boards - fix OF node refcount bugs on omapdss - fix WARN about clock prepare on pxa3xx_gcu - fix mem leak in videomode helpers - fix fbconsole related boot problem on sun7i-a20-olinuxino-micro * tag 'fbdev-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: fbcon: unconditionally initialize cursor blink interval video: Fix possible leak in of_get_videomode() video: fbdev: pxa3xx_gcu: prepare the clocks OMAPDSS: Fix omap_dss_find_output_by_port_node() port refcount decrement OMAPDSS: Fix node refcount leak in omapdss_of_get_next_port() fbdev: select versatile helpers for the integrator
-
Nathan Lynch authored
Since 906c5557 ("timekeeping: Copy the shadow-timekeeper over the real timekeeper last") it has become possible on ARM to: - Obtain a CLOCK_MONOTONIC_COARSE or CLOCK_REALTIME_COARSE timestamp via syscall. - Subsequently obtain a timestamp for the same clock ID via VDSO which predates the first timestamp (by one jiffy). This is because ARM's update_vsyscall is deriving the coarse time using the __current_kernel_time interface, when it should really be using the timekeeper object provided to it by the timekeeping core. It happened to work before only because __current_kernel_time would access the same timekeeper object which had been passed to update_vsyscall. This is no longer the case. Cc: stable@vger.kernel.org Fixes: 906c5557 ("timekeeping: Copy the shadow-timekeeper over the real timekeeper last") Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-