There is no SPEAr600 device named "adc". Instead, the description of the
ADC was recently added to the Device Tree, and the device name is
"d820b000.adc", so we should associate the ADC gatable clock to this
device name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add MT6797 clock support, include topckgen, apmixedsys, infracfg
and subsystem clocks
Signed-off-by: Kevin-CW Chen <kevin-cw.chen@mediatek.com>
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This patch adds the binding documentation for apmixedsys, imgsys,
infracfg, mmsys, topckgen, vdecsys and vencsys for MT6797.
Signed-off-by: Kevin-CW Chen <kevin-cw.chen@mediatek.com>
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

* clk-mt6797:
  clk: mediatek: add mt6797 clock IDs

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add the missing ipg_root_clk which actually is already used by many
orphan clks in current tree.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

MX7D ahb clk actually has no LPCG gate, current LPCG offset 0x4200
used actually is for adc, not ahb. After fix, correct ocram_s_clk
parent accordingly as well.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Update IDT VersaClock 5 driver to support 5P49V5935. This chip has
two clock inputs (internal XTAL or external CLKIN), four fractional
dividers (FODs) and five clock outputs (four universal clock outputs
and one reference clock output at OUT0_SELB_I2C).

Current driver supports up to 2 FODs and up to 3 clock outputs. This
patch sets max number of supported FODs to 4 and max number of supported
clock outputs to 5.
Signed-off-by: Alexey Firago <alexey_firago@mentor.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

IDT VersaClock 5 5P49V5935 has 4 clock outputs, 4 fractional dividers.
Input clock source can be taken from either integrated crystal or from
external reference clock.
Signed-off-by: Alexey Firago <alexey_firago@mentor.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Introduce vc5_chip_info structure to describe features of a particular
VC5 chip (id, number of FODs, number of outputs, flags).
For now flags are only used to indicate if chip has internal XTAL.
vc5_chip_info is set on probe from the matched of_device_id->data.

Also add defines to specify maximum number of FODs and clock outputs
supported by the driver.

With these changes it should be easier to extend driver to support
more VC5 models.
Signed-off-by: Alexey Firago <alexey_firago@mentor.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'sunxi-clk-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next

Pull Allwinner clock patches for 4.12 from Maxime Ripard:

Support for the new H5 SoC and the PRCM block found in a number of SoCs as
well, plus the usual chunk of fixes and minor enhancements.

* tag 'sunxi-clk-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: Display index when clock registration fails
  clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor
  clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks
  clk: sunxi-ng: mult: Support PLL lock detection
  clk: sunxi-ng: add support for PRCM CCUs
  dt-bindings: update device tree binding for Allwinner PRCM CCUs
  clk: sunxi-ng: sun5i: Fix mux width for csi clock
  clk: sunxi-ng: tighten SoC deps on explicit AllWinner SoCs
  clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver
  clk: sunxi-ng: gate: Support common pre-dividers

* clk-fixes:
  clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change
  clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks
  clk: sunxi-ng: fix build failure in ccu-sun9i-a80 driver
  clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER
  clk: stm32f4: fix: exclude values 0 and 1 for PLLQ

Merge tag 'sunxi-clk-fixes-for-4.11-2-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes

Pull Allwinner clock fixes for 4.11 from Maxime Ripard:

Two build errors fixes for the sunxi-ng drivers.

The two other patches fix random CPU crashes happening on the A33 since
CPUFreq has been enabled in 4.11.

* tag 'sunxi-clk-fixes-for-4.11-2-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change
  clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks
  clk: sunxi-ng: fix build failure in ccu-sun9i-a80 driver
  clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER

This patch utilizes the new PLL clk notifier to gate then ungate the
PLL CPU clock after rate changes. This should mitigate the system
hangs observed after the introduction of cpufreq for the A33.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

In common PLL designs, changes to the dividers take effect almost
immediately, while changes to the multipliers (implemented as
dividers in the feedback loop) take a few cycles to work into
the feedback loop for the PLL to stablize.

Sometimes when the PLL clock rate is changed, the decrease in the
divider is too much for the decrease in the multiplier to catch up.
The PLL clock rate will spike, and in some cases, might lock up
completely. This is especially the case if the divider changed is
the pre-divider, which affects the reference frequency.

This patch introduces a clk notifier callback that will gate and
then ungate a clk after a rate change, effectively resetting it,
so it continues to work, despite any possible lockups. Care must
be taken to reparent any consumers to other temporary clocks during
the rate change, and that this notifier callback must be the first
to be registered.

This is intended to fix occasional lockups with cpufreq on newer
Allwinner SoCs, such as the A33 and the H3. Previously it was
thought that reparenting the cpu clock away from the PLL while
it stabilized was enough, as this worked quite well on the A31.

On the A33, hangs have been observed after cpufreq was recently
introduced. With the H3, a more thorough test [1] showed that
reparenting alone isn't enough. The system still locks up unless
the dividers are limited to 1.

A hunch was if the PLL was stuck in some unknown state, perhaps
gating then ungating it would bring it back to normal. Tests
done by Icenowy Zheng using Ondrej's test firmware shows this
to be a valid solution.

[1] http://www.spinics.net/lists/arm-kernel/msg552501.htmlReported-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The ccu-sun9i-a80 driver uses the ccu_mult_ops struct, but unlike the other
users it doesen't select the corresponding Kconfig symbol under which the
struct is compiled in.

This results in the following link error with CONFIG_SUN9I_A80_CCU=y and
CONFIG_SUNXI_CCU_MULT=n:

drivers/built-in.o:(.data+0x2d638): undefined reference to 'ccu_mult_ops'

Fix this by explicitly selecting CONFIG_SUNXI_CCU_MULT like the other
users of the struct.
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

With CONFIG_RESET_CONTROLLER=n we get the following link error in the
sunxi-ng clk driver:

drivers/built-in.o: In function `sunxi_ccu_probe':
mux-core.c:(.text+0x12fe68): undefined reference to 'reset_controller_register'
mux-core.c:(.text+0x12fe68): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'reset_controller_register'

Fix this by adding the appropriate select statement.
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Pull AmLogic clk driver updates from Jerome Brunet:

2nd Amlogic clock driver update for 4.12:
* Protect against holes in onecell_data
* Fix divison by zero and overflow in the mpll driver
* Add audio clock divider driver for i2s clocks
* Add i2s and spdif master clocks

Merge tag 'amlogic-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into clk-next

Same great taste as the previous pull request, but now with 50% less DT
bikeshedding!

Amlogic clock driver updates for v4.12
- meson8: add some new PLLs
- new clocks for Mali
- misc fixes.

In case there are multiple notify chains for the same clocks (because they
were registered by different users), we need to propagate potential failure
of any single one of them to the caller. Otherwise we eg risk violating the
V/f curve when a notifier is used for DVFS.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

For validation purposes, it's often useful to be able to retrieve the list
of possible parents in userspace. Add a debugfs file for every clock which
has more than 1 possible parent.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
[sboyd@codeaurora.org: Remove useless cast from void and extra
newline]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

These should be const.

Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

It adds zx296718 pll_vga clock for VGA support, so that VGA device can
get required pixel rate from clock driver for different display mode.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

The bit 0 of PLL_CFG0 register is not powerdown on zx296718, but part of
of postdiv2 field.  The consequence is that functions like hw_to_idx()
and zx_pll_enable() will end up tampering the postdiv2 of the PLL.

Let's fix it by defining pd_bit 0xff which is obviously invalid for a
bit position and having PLL driver check the validity before operating
on the bit.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

To support VOU VGA display driver with different modes, we need to set
flag for a few clocks, so that clk_set_rate() call in VOU driver can get
VGA device desired pixel rate.

While at it, the divider between pll_vga and clk_vga gets corrected, as
it's 1:1 instead of 1:2.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register.
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Merge tag 'tegra-for-4.12-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next

Pull Tegra clk driver updates from Thierry Reding:

This contains a bunch of fixes and cleanups, mostly to the Tegra210
clock driver.

* tag 'tegra-for-4.12-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (24 commits)
  clk: tegra: Don't reset PLL-CX if it is already enabled
  clk: tegra: Add missing Tegra210 clocks
  clk: tegra: Propagate clk_out_x rate to parent
  clk: tegra: Fix build warnings on Tegra20/Tegra30
  clk: tegra: Mark TEGRA210_CLK_DBGAPB as always on
  clk: tegra: Add SATA seq input control
  clk: tegra: Add Tegra210 special resets
  clk: tegra: Rework pll_u
  clk: tegra: Implement reset control reset
  clk: tegra: Fix disable unused for clocks sharing enable bit
  clk: tegra: Handle UTMIPLL IDDQ
  clk: tegra: Add aclk
  clk: tegra: Add super clock mux/divider
  clk: tegra: Define Tegra210 DMIC clocks
  clk: tegra: Fix constness for peripheral clocks
  clk: tegra: Define Tegra210 DMIC sync clocks
  clk: tegra: Add CEC clock
  clk: tegra: Fix type for m field
  clk: tegra: Correct tegra210_pll_fixed_mdiv_cfg rate calculation
  clk: tegra: Don't warn for PLL defaults unnecessarily
  ...

Thus CS2000 datasheet is indicating below, this patch
follows it.

WARNING: All "Reserved" registers must maintain their default
         state to ensure proper functional operation.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Fix a typo which caused both vfe0 and vfe1 powerdomains to be
named as vfe0.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Fixes: 7e824d50 ("clk: qcom: gdsc: Add mmcc gdscs for msm8996 family")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Use a classic polling to test bit ready.
And the shift of the bit ready of LSE & LSI were wrongs.

Fixes: 861adc44 ("clk: stm32f4: Add LSI & LSE clocks")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Remove the redundant check of 'rate' in the if statement of the
'pll_set_rate' function
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Fixes: 5fe225c1 ("clk: iproc: add initial common clock support")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Merge tag 'v4.12-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull rockchip clk driver updates from Heiko Stuebner:

  General rockchip clock changes for 4.12. Contains some new clock-ids
  as well as fixups of the clock-ids on rk3368 timers, which were unused
  and completely wrong (more and differently named timers).
  Also there is one new clock on rk3328 using the muxgrf type, a fix for
  pll enablement which should wait for the pll to lock before continuing,
  some more critical clocks and the rename of the rk1108 to rv1108, as the
  soc seems to have been using a preliminary name before its actual release.
  The plan is to have the driver changes (pinctrl, clk) go through the
  respective maintainer trees and once everything landed in mainline do
  the rename of the devicetree files. With the dts-include change in the
  clock rename, we also keep everything compiling and thus bisectability.

* tag 'v4.12-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: add pll_wait_lock for pll_enable
  clk: rockchip: rename RK1108 to RV1108
  dt-bindings: rk1108-cru: rename RK1108 to RV1108
  clk: rockchip: mark some rk3368 core-clks as critical
  clk: rockchip: export SCLK_TIMERXX id for timers on rk3368
  clk: rockchip: describe clk_gmac using the new muxgrf type on rk3328
  clk: rockchip: add clock ids for timer10-15 of RK3368 SoCs
  clk: rockchip: fix up rk3368 timer-ids
  clk: rockchip: add rk3328 clk_mac2io_ext ID
  clk: rockchip: Set "ignore unused" for PMU M0 clocks on rk3399

Merge tag 'clk-renesas-for-v4.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull Renesas clk driver updates from Geert Uytterhoeven:

  - Add support for the Clock Pulse Generator / Module Standby and
    Software Reset module on revision ES2.0 of the R-Car H3 SoC, which
    differs from ES1.x in some areas.
  - Add IMR clocks for R-Car H3 and M3-W,
  - Add workaround for PLL0/2/4 errata on R-Car H3 ES1.0,
  - Small fixes and cleanups.

* tag 'clk-renesas-for-v4.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: rcar-gen3-cpg: Add support for RCLK on R-Car H3 ES2.0
  clk: renesas: r8a7795: Add support for R-Car H3 ES2.0
  clk: renesas: Add r8a7795 ES2.0 CPG Core Clock Definitions
  clk: renesas: cpg-mssr: Add support for fixing up clock tables
  clk: renesas: rcar-gen3: Add workaround for PLL0/2/4 errata on H3 ES1.0
  clk: renesas: rcar-gen3-cpg: Pass mode pins to rcar_gen3_cpg_init()
  clk: renesas: r8a7796: Reformat core clock table
  clk: renesas: r8a7795: Reformat core clock table
  clk: renesas: r8a7796: Correct name of watchdog clock
  clk: renesas: r8a7795: Correct name of watchdog clock
  clk: renesas: r8a7795: Correct parent clock and sort order for Audio DMACs
  clk: renesas: r8a7796: Add IMR clocks
  clk: renesas: r8a7795: Add IMR clocks

* clk-fixes:
  clk: stm32f4: fix: exclude values 0 and 1 for PLLQ

0000: PLLQ = 0, wrong configuration
0001: PLLQ = 1, wrong configuration
...
0010: PLLQ = 2
0011: PLLQ = 3
0100: PLLQ = 4
...
1111: PLLQ = 1

Use divider table to exclude 0 and 1 values.

Fixes: 83135ad3 ("clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

* 'for-4.12-ti-clk-cleanups' of https://github.com/t-kristo/linux-pm:
  clk: ti: convert to use proper register definition for all accesses
  clk: ti: dpll44xx: fix clksel register initialization
  clk: ti: gate: export gate_clk_ops locally
  clk: ti: divider: add driver internal API for parsing divider data
  clk: ti: divider: convert TI divider clock to use its own data representation
  clk: ti: mux: convert TI mux clock to use its internal data representation
  clk: ti: drop unnecessary MEMMAP_ADDRESSING flag
  clk: ti: omap4: cleanup unnecessary clock aliases
  clk: ti: enforce const types on string arrays
  clk: ti: move omap2_init_clk_clkdm under TI clock driver
  clk: ti: add clkdm_lookup to the exported functions
  clk: ti: use automatic clock alias generation framework
  clk: ti: add API for creating aliases automatically for simple clock types
  clk: ti: add support for automatic clock alias generation
  clk: ti: remove un-used definitions from public clk_hw_omap struct

The debug APB clock is absent in hi6220 driver, so this patch is to add
support for it.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

On Meson8b the MPLL parent clock (fixed_pll) has a rate of 2550MHz.
Multiplying this with SDM_DEN results in a value greater than 32bits.
This is not a problem on the 64bit Meson GX SoCs, but it may result in
undefined behavior on the older 32bit Meson8b SoC.

While rate_from_params was only introduced recently to make the math
reusable from _round_rate and _recalc_rate the original bug exists much
longer.

Fixes: 1c50da4f ("clk: meson: add mpll support")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[as discussed on the ml, use DIV_ROUND_UP_ULL]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>