- 14 May, 2017 13 commits
-
-
Brian Norris authored
commit 6183468a upstream. Similar to commit fcd2042e ("mwifiex: printk() overflow with 32-byte SSIDs"), we failed to account for the existence of 32-char SSIDs in our debugfs code. Unlike in that case though, we zeroed out the containing struct first, and I'm pretty sure we're guaranteed to have some padding after the 'ssid.ssid' and 'ssid.ssid_len' fields (the struct is 33 bytes long). So, this is the difference between: # cat /sys/kernel/debug/mwifiex/mlan0/info ... essid="0123456789abcdef0123456789abcdef " ... and the correct output: # cat /sys/kernel/debug/mwifiex/mlan0/info ... essid="0123456789abcdef0123456789abcdef" ... Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthijs van Duin authored
commit 448c077e upstream. 'adr' yields a data-pointer, not a function-pointer. Fixes: 999f934d ("ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode") Signed-off-by:
Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Arnd Bergmann authored
commit cbe99c53 upstream. gcc gets confused about the control flow in ktd2692_parse_dt(), causing it to warn about what seems like a potential bug: drivers/leds/leds-ktd2692.c: In function 'ktd2692_probe': drivers/leds/leds-ktd2692.c:244:15: error: '*((void *)&led_cfg+8)' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/leds/leds-ktd2692.c:225:7: error: 'led_cfg.flash_max_microamp' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/leds/leds-ktd2692.c:232:3: error: 'led_cfg.movie_max_microamp' may be used uninitialized in this function [-Werror=maybe-uninitialized] The code is fine, and slightly reworking it in an equivalent way lets gcc figure that out too, which gets rid of the warning. Fixes: 77e7915b ("leds: ktd2692: Add missing of_node_put") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Liam Breck authored
commit ba52e757 upstream. Reading both fault and status registers and logging any fault should take priority over handling status register update. Fix by moving the status handling to later in interrupt routine. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
Liam Breck <kernel@networkimprov.net> Acked-by:
Mark Greer <mgreer@animalcreek.com> Acked-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Liam Breck authored
commit 68abfb80 upstream. Caching the fault register after a single I2C read may not keep an accurate value. Fix by doing two reads in irq_handle_thread() and using the cached value elsewhere. If a safety timer fault later clears itself, we apparently don't get an interrupt (INT), however other interrupts would refresh the register cache. From the data sheet: "When a fault occurs, the charger device sends out INT and keeps the fault state in REG09 until the host reads the fault register. Before the host reads REG09 and all the faults are cleared, the charger device would not send any INT upon new faults. In order to read the current fault status, the host has to read REG09 two times consecutively. The 1st reads fault register status from the last read [1] and the 2nd reads the current fault register status." [1] presumably a typo; should be "last fault" Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Liam Breck authored
commit 2d9fee6a upstream. We wrongly get uevents for bq24190-charger and bq24190-battery on every register change. Fix by checking the association with charger and battery before emitting uevent(s). Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Liam Breck authored
commit d62acc5e upstream. The device specific data is not fully initialized on request_threaded_irq(). This may cause a crash when the IRQ handler tries to reference them. Fix the issue by installing IRQ handler at the end of the probe. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Liam Breck authored
commit e05ad7e0 upstream. pm_resume() does a register_reset() which clears charger host mode. Fix by calling set_mode_host() after the reset. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Liam Breck authored
commit 767eee36 upstream. The interrupt signal is TRIGGER_FALLING. This is is specified in the data sheet PIN FUNCTIONS: "The INT pin sends active low, 256us pulse to host to report charger device status and fault." Also the direction can be seen in the data sheet Figure 37 "BQ24190 with D+/D- Detection and USB On-The-Go (OTG)" which shows a 10k pull-up resistor installed for the sample configurations. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Michael Ellerman authored
commit a7e0fb6c upstream. Currently the opal_exit tracepoint usually shows the opcode as 0: <idle>-0 [047] d.h. 635.654292: opal_entry: opcode=63 <idle>-0 [047] d.h. 635.654296: opal_exit: opcode=0 retval=0 kopald-1209 [019] d... 636.420943: opal_entry: opcode=10 kopald-1209 [019] d... 636.420959: opal_exit: opcode=0 retval=0 This is because we incorrectly load the opcode into r0 before calling __trace_opal_exit(), whereas it expects the opcode in r3 (first function parameter). In fact we are leaving the retval in r3, so opcode and retval will always show the same value. Instead load the opcode into r3, resulting in: <idle>-0 [040] d.h. 636.618625: opal_entry: opcode=63 <idle>-0 [040] d.h. 636.618627: opal_exit: opcode=63 retval=0 Fixes: c49f6353 ("powernv: Add OPAL tracepoints") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ben Hutchings authored
commit 4cca0457 upstream. The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both flags set and an assumed base clock of 100 MHz for turbo values. Reported-by:
GSR <gsr.bugs@infernal-iceberg.com> Tested-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 5008efc8 upstream. The PJ4 inline asm sequence to write to cp15 cannot be built in Thumb-2 mode, due to the way it performs arithmetic on the program counter, so it is built in ARM mode instead. However, building C files in ARM mode under CONFIG_THUMB2_KERNEL is problematic, since the instrumentation performed by subsystems like ftrace does not expect having to deal with interworking branches. Since the sequence in question is simply a poor man's ISB instruction, let's use a straight 'isb' instead when building in Thumb2 mode. Thumb2 implies V7, so 'isb' should always be supported in that case. Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Cong Wang authored
commit b5c66bab upstream. posix_acl_update_mode() could possibly clear 'acl', if so we leak the memory pointed by 'acl'. Save this pointer before calling posix_acl_update_mode() and release the memory if 'acl' really gets cleared. Link: http://lkml.kernel.org/r/1486678332-2430-1-git-send-email-xiyou.wangcong@gmail.comSigned-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reported-by:
Mark Salyzyn <salyzyn@android.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Greg Kurz <groug@kaod.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 08 May, 2017 22 commits
-
-
Greg Kroah-Hartman authored
-
Adrian Salido authored
commit 4617f564 upstream. When calling a dm ioctl that doesn't process any data (IOCTL_FLAGS_NO_PARAMS), the contents of the data field in struct dm_ioctl are left initialized. Current code is incorrectly extending the size of data copied back to user, causing the contents of kernel stack to be leaked to user. Fix by only copying contents before data and allow the functions processing the ioctl to override. Signed-off-by:
Adrian Salido <salidoa@google.com> Reviewed-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit 13bf9fbf upstream. The NFSv2/v3 code does not systematically check whether we decode past the end of the buffer. This generally appears to be harmless, but there are a few places where we do arithmetic on the pointers involved and don't account for the possibility that a length could be negative. Add checks to catch these. Reported-by:
Tuomas Haanpää <thaan@synopsys.com> Reported-by:
Ari Kauppi <ari@synopsys.com> Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit db44bac4 upstream. Use a couple shortcuts that will simplify a following bugfix. (Minor backporting required to account for a change from f34b9568 "The NFSv2/NFSv3 server does not handle zero length WRITE requests correctly".) Signed-off-by:
-
Jaegeuk Kim authored
commit 03a8bb0e upstream. As Al pointed, d_revalidate should return RCU lookup before using d_inode. This was originally introduced by: commit 34286d66 ("fs: rcu-walk aware d_revalidate method"). Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Theodore Ts'o authored
commit 3d43bcfe upstream. This avoids potential problems caused by a race where the inode gets renamed out from its parent directory and the parent directory is deleted while ext4_d_revalidate() is running. Fixes: 28b4c263Reported-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit 28b4c263 upstream. Add a validation check for dentries for encrypted directory to make sure we're not caching stale data after a key has been added or removed. Also check to make sure that status of the encryption key is updated when readdir(2) is executed. Signed-off-by:
-
Richard Weinberger authored
commit 9a200d07 upstream. ...otherwise an user can enable encryption for certain files even when the filesystem is unable to support it. Such a case would be a filesystem created by mkfs.ext4's default settings, 1KiB block size. Ext4 supports encyption only when block size is equal to PAGE_SIZE. But this constraint is only checked when the encryption feature flag is set. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Arnd Bergmann authored
The driver causes two warnings about possibly uninitialized variables: drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf': drivers/infiniband/hw/ehca/ehca_mrmw.c:1908:4: warning: 'prev_pgaddr' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/infiniband/hw/ehca/ehca_mrmw.c:1924:14: note: 'prev_pgaddr' was declared here drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_reg_mr': drivers/infiniband/hw/ehca/ehca_mrmw.c:2430:5: warning: 'hret' may be used uninitialized in this function [-Wmaybe-uninitialized] The first one is definitely a false positive, the second one may or may not be one. In both cases, adding an intialization is the safe and easy workaround. The driver was removed in mainline in commit e581d111 ("staging/rdma: remove deprecated ehca driver"), in linux-4.6. In 4.4, the file is located in drivers/staging/rdma/ehca/ehca_mrmw.c, and the fix still applies. Signed-off-by:
-
Arnd Bergmann authored
We get this build warning on arm64 drivers/infiniband/hw/qib/qib_qp.c:44:0: error: "BITS_PER_PAGE" redefined [-Werror] #define BITS_PER_PAGE (PAGE_SIZE*BITS_PER_BYTE) This is fixed upstream in commit 898fa52b ("IB/qib: Remove qpn, qp tables and related variables from qib"), which does a lot of other things as well. Instead, I just backport the rename of the local BITS_PER_PAGE definition to RVT_BITS_PER_PAGE. The driver first showed up in linux-2.6.35, and the fixup should still apply to that. The upstream fix went into v4.6, so we could apply this workaround to both 3.18 and 4.4. Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Signed-off-by:
-
Ross Lagerwall authored
The backport of d35c99ff ("netlink: do not enter direct reclaim from netlink_dump()") to the 4.4 branch (first in 4.4.32) mistakenly removed direct claim from the initial large allocation _and_ the fallback allocation which means that allocations can spuriously fail. Fix the issue by adding back the direct reclaim flag to the fallback allocation. Fixes: 6d123f1d ("netlink: do not enter direct reclaim from netlink_dump()") Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
commit c130b666 upstream. Commit f209fa03 ("serial: 8250_pci: Detach low-level driver during PCI error recovery") introduces a potential use-after-free in case the pciserial_init_ports call in serial8250_io_resume fails, which may happen if a memory allocation fails or if the .init quirk failed for whatever reason). If this happen, further pci_get_drvdata will return a pointer to freed memory. This patch reworks the PCI recovery resume hook to restore the old priv structure in this case, which should be ok, since the ports were already detached. Such error during recovery causes us to give up on the recovery. Fixes: f209fa03 ("serial: 8250_pci: Detach low-level driver during PCI error recovery") Reported-by:
Michal Suchanek <msuchanek@suse.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Matthew R. Ochs authored
commit 05dab432 upstream. When an EEH occurs during device initialization, the port timeout logic can cause excessive delays as MMIO reads will fail. Depending on where they are experienced, these delays can lead to a prolonged reset, causing an unnecessary triggering of other timeout logic in the SCSI stack or user applications. To expedite recovery, the port timeout logic is updated to decay the timeout at a much faster rate when in the presence of a likely EEH frozen event. Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Acked-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Matthew R. Ochs authored
commit 1d3324c3 upstream. The EEH reset handler is ignorant to the current state of the driver when processing a frozen event and initiating a device reset. This can be an issue if an EEH event occurs while a user or stack initiated reset is executing. More specifically, if an EEH occurs while the SCSI host reset handler is active, the reset initiated by the EEH thread will likely collide with the host reset thread. This can leave the device in an inconsistent state, or worse, cause a system crash. As a remedy, the EEH handler is updated to evaluate the device state and take appropriate action (proceed, wait, or disconnect host). The host reset handler is also updated to handle situations where an EEH occurred during a host reset. In such situations, the host reset handler will delay reporting back a success to give the EEH reset an opportunity to complete. Signed-off-by:
-
Uma Krishnan authored
commit bbbfae96 upstream. When a port link is established, the AFU sends a 'link up' interrupt. After the link is up, corresponding initialization steps are performed on the card. Following that, when the card is ready for I/O, the AFU sends 'login succeeded' interrupt. Today, cxlflash invokes scsi_scan_host() upon receipt of both interrupts. SCSI commands sent to the port prior to the 'login succeeded' interrupt will fail with 'port not available' error. This is not desirable. Moreover, when async_scan is active for the host, subsequent scan calls are terminated with error. Due to this, the scsi_scan_host() call performed after 'login succeeded' interrupt could portentially return error and the devices may not be scanned properly. To avoid this problem, scsi_scan_host() should be called only after the 'login succeeded' interrupt. Signed-off-by:
-
Arnd Bergmann authored
commit e434e041 upstream. The tg3_set_eeprom() function correctly initializes the 'start' variable, but gcc generates a false warning: drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom': drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] I have not come up with a way to restructure the code in a way that avoids the warning without making it less readable, so this adds an initialization for the declaration to shut up that warning. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Arnd Bergmann authored
commit fddcca51 upstream. When map_word gets too large, we use a lot of kernel stack, and for MTD_MAP_BANK_WIDTH_32, this means we use more than the recommended 1024 bytes in a number of functions: drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers': drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_erase_varsize': drivers/mtd/chips/cfi_cmdset_0020.c:972:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/mtd/chips/cfi_cmdset_0001.c: In function 'do_write_buffer': drivers/mtd/chips/cfi_cmdset_0001.c:1835:1: warning: the frame size of 1240 bytes is larger than 1024 bytes [-Wframe-larger-than=] This can be avoided if all operations on the map word are done indirectly and the stack gets reused between the calls. We can mostly achieve this by selecting MTD_COMPLEX_MAPPINGS whenever MTD_MAP_BANK_WIDTH_32 is set, but for the case that no other bank width is enabled, we also need to use a non-constant map_bankwidth() to convince the compiler to use less stack. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Lars Ellenberg authored
commit 2630628b upstream. Apparently we now implicitly get definitions for BITS_PER_PAGE and BITS_PER_PAGE_MASK from the pid_namespace.h Instead of renaming our defines, I chose to define only if not yet defined, but to double check the value if already defined. Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit b268c34e upstream. The awacs sound driver produces a false-positive warning in ppc64_defconfig: sound/ppc/awacs.c: In function 'snd_pmac_awacs_init': include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] I haven't come up with a good way to rewrite the code to avoid the warning, so here is a bad one: I initialize the variable before the conditionall initialization so gcc no longer has to worry about it. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 6e4cac23 upstream. The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry the ignore_suspend flag, and this prevents the suspend/resume working properly while the stream is running, since SST core code has the check of the running streams and returns -EBUSY. Drop these superfluous flags for fixing the behavior. Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE definitions, which leads to the kernel Oops at suspend/resume like: BUG: scheduling while atomic: systemd-sleep/3144/0x00000003 Call Trace: dump_stack+0x5c/0x7a __schedule_bug+0x55/0x70 __schedule+0x63c/0x8c0 schedule+0x3d/0x90 schedule_timeout+0x16b/0x320 ? del_timer_sync+0x50/0x50 ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? remove_wait_queue+0x60/0x60 ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core] ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core] .... This patch addresses these appropriately, too. [tiwai: applied only to bytcr_rt5640 as bytcr_rt5651 isn't present in 4.4.x yet] Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
-
Sachin Prabhu authored
commit 38bd4906 upstream. A signal can interrupt a SendReceive call which result in incoming responses to the call being ignored. This is a problem for calls such as open which results in the successful response being ignored. This results in an open file resource on the server. The patch looks into responses which were cancelled after being sent and in case of successful open closes the open fids. For this patch, the check is only done in SendReceive2() RH-bz: 1403319 Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Acked-by:
-
Thomas Gleixner authored
commit 1e38da30 upstream. The handling of the might_cancel queueing is not properly protected, so parallel operations on the file descriptor can race with each other and lead to list corruptions or use after free. Protect the context for these operations with a seperate lock. The wait queue lock cannot be reused for this because that would create a lock inversion scenario vs. the cancel lock. Replacing might_cancel with an atomic (atomic_t or atomic bit) does not help either because it still can race vs. the actual list operation. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "linux-fsdevel@vger.kernel.org" Cc: syzkaller <syzkaller@googlegroups.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311521430.3457@nanosSigned-off-by:
-
- 03 May, 2017 5 commits
-
-
Greg Kroah-Hartman authored
-
Josh Poimboeuf authored
commit 34a477e5 upstream. On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function graph tracing and then suspend to RAM, it will triple fault and reboot when it resumes. The first fault happens when booting a secondary CPU: startup_32_smp() load_ucode_ap() prepare_ftrace_return() ftrace_graph_is_dead() (accesses 'kill_ftrace_graph') The early head_32.S code calls into load_ucode_ap(), which has an an ftrace hook, so it calls prepare_ftrace_return(), which calls ftrace_graph_is_dead(), which tries to access the global 'kill_ftrace_graph' variable with a virtual address, causing a fault because the CPU is still in real mode. The fix is to add a check in prepare_ftrace_return() to make sure it's running in protected mode before continuing. The check makes sure the stack pointer is a virtual kernel address. It's a bit of a hack, but it's not very intrusive and it works well enough. For reference, here are a few other (more difficult) ways this could have potentially been fixed: - Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging is enabled. (No idea what that would break.) - Track down load_ucode_ap()'s entire callee tree and mark all the functions 'notrace'. (Probably not realistic.) - Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu() or __cpu_up(), and ensure that the pause facility can be queried from real mode. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net> Cc: linux-acpi@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.comSigned-off-by:
-
Vineet Gupta authored
commit ecd43afd upstream. This is not exposed to userspace debugers yet, which can be done independently as a seperate patch ! Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
J. Bruce Fields authored
commit e6838a29 upstream. A client can append random data to the end of an NFSv2 or NFSv3 RPC call without our complaining; we'll just stop parsing at the end of the expected data and ignore the rest. Encoded arguments and replies are stored together in an array of pages, and if a call is too large it could leave inadequate space for the reply. This is normally OK because NFS RPC's typically have either short arguments and long replies (like READ) or long arguments and short replies (like WRITE). But a client that sends an incorrectly long reply can violate those assumptions. This was observed to cause crashes. Also, several operations increment rq_next_page in the decode routine before checking the argument size, which can leave rq_next_page pointing well past the end of the page array, causing trouble later in svc_free_pages. So, following a suggestion from Neil Brown, add a central check to enforce our expectation that no NFSv2/v3 call has both a large call and a large reply. As followup we may also want to rewrite the encoding routines to check more carefully that they aren't running off the end of the page array. We may also consider rejecting calls that have any extra garbage appended. That would be safer, and within our rights by spec, but given the age of our server and the NFS protocol, and the fact that we've never enforced this before, we may need to balance that against the possibility of breaking some oddball client. Reported-by:
-
Dmitry Torokhov authored
commit 7c5bb4ac upstream. Clevo P650RS and other similar devices require i8042 to be reset in order to detect Synaptics touchpad. Reported-by:
Paweł Bylica <chfast@gmail.com> Tested-by:
Ed Bordin <edbordin@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
