The sendmask check is not needed. Remove it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Adapt new API.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Small code cleanup.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

On cpu hot remove a PFAULT CANCEL command is sent to the hypervisor
which in turn will cancel all outstanding pfault requests that have
been issued on that cpu (the same happens with a SIGP cpu reset).

The result is that we end up with uninterruptible processes where
the interrupt that would wake up these processes never arrives.

In order to solve this all processes which wait for a pfault
completion interrupt get woken up after a cpu hot remove. The worst
case that could happen is that they fault again and in turn need to
wait again.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add missing __noreturn attribute to cpu_die():

arch/s390/kernel/smp.c:691:6: error: symbol 'cpu_die' redeclared with different type
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Implement arch specific irqsafe_cpu ops. The arch specific ops do not
disable/enable interrupts since that is an expensive operation. Instead
we disable preemption and perform a compare and swap loop.
Since on server distros (the ones we care about) preemption is disabled
the preempt_disable()/preempt_enable() pair is a nop.
In the end this code should be faster than the generic one.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The concepts of VDSO and gcov-based profiling don't mix: the former
includes kernel-provided code running in userspace, the latter adds
instructions that modify counters in kernel data segments. On s390
this has not been a problem so far due to VDSO code being written in
all-assembler which is exempt from gcov-based profiling. This could
change in the future, so disable profiling excplicitly for VDSO code.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The registration of an ap device will be skipped, if the device type
probing fails.
Add names of current crypto adapters to the Kconfig help.
Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Get rid of these:

arch/s390/mm/extmem.c: In function 'segment_modify_shared':
arch/s390/mm/extmem.c:622:3: warning: 'end_addr' may be used uninitialized in this function [-Wuninitialized]
arch/s390/mm/extmem.c:627:18: warning: 'start_addr' may be used uninitialized in this function [-Wuninitialized]
arch/s390/mm/extmem.c: In function 'segment_load':
arch/s390/mm/extmem.c:481:11: warning: 'end_addr' may be used uninitialized in this function [-Wuninitialized]
arch/s390/mm/extmem.c:480:18: warning: 'start_addr' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Return codes are on purpose not handled or used. So remove them.
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix return code handling within monwrite_new_hdr(). Return code handling
is everwhere implemented, the return code of the diagnose function was
just not passed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Check return value of itcw_add_dcw() for error code and return it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Remove trivially unused variables as detected with -Wunused-but-set-variable.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Remove the tape block device driver. It's not of real use but has
already created some confusion when users wanted to access tape devices
and used the block device nodes instead of the character device nodes.

Also remove the whole tape documentation since it's completely outdated
and we have the device drivers book which is the place where everything
is properly documented.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The noexec support on s390 does not rely on a bit in the page table
entry but utilizes the secondary space mode to distinguish between
memory accesses for instructions vs. data. The noexec code relies
on the assumption that the cpu will always use the secondary space
page table for data accesses while it is running in the secondary
space mode. Up to the z9-109 class machines this has been the case.
Unfortunately this is not true anymore with z10 and later machines.
The load-relative-long instructions lrl, lgrl and lgfrl access the
memory operand using the same addressing-space mode that has been
used to fetch the instruction.
This breaks the noexec mode for all user space binaries compiled
with march=z10 or later. The only option is to remove the current
noexec support.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

In ccw_device_set_online we basically start path verification and
wait for the device to reach a final state. If it turns out that the
device has no useable path we schedule the deregistration of the
device (which is still in an non-final state) and wake up the waiting
process. The deregistration process will set a final state, but if
the wake up happens to be prior to this, the device will hang forever
in ccw_device_set_online.

To fix this just set the final NOT_OPER state prior to the scheduled
deregistration of the device.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: use mark_buffer_dirty to mark btnode or meta data dirty
  nilfs2: always set back pointer to host inode in mapping->host
  nilfs2: get rid of NILFS_I_NILFS
  nilfs2: use list_first_entry
  nilfs2: use empty_aops for gc-inodes
  nilfs2: implement resize ioctl
  nilfs2: add truncation routine of segment usage file
  nilfs2: add routine to move secondary super block
  nilfs2: add ioctl which limits range of segment to be allocated
  nilfs2: zero fill unused portion of super root block
  nilfs2: super root size should change depending on inode size
  nilfs2: get rid of private page allocator
  nilfs2: merge list_del()/list_add_tail() to list_move_tail()

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide/ide-scan-pci.c: Use for_each_pci_dev().
  ide: Use linux/mutex.h
  IDE: ide-floppy, remove unnecessary NULL check
  drivers/ide/pmac.c: Remove unnecessary casts of pci_get_drvdata
  ide: fix use after free in ide-acpi

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (28 commits)
  sparc32: fix build, fix missing cpu_relax declaration
  SCHED_TTWU_QUEUE is not longer needed since sparc32 now implements IPI
  sparc32,leon: Remove unnecessary page_address calls in LEON DMA API.
  sparc: convert old cpumask API into new one
  sparc32, sun4d: Implemented SMP IPIs support for SUN4D machines
  sparc32, sun4m: Implemented SMP IPIs support for SUN4M machines
  sparc32,leon: Implemented SMP IPIs for LEON CPU
  sparc32: implement SMP IPIs using the generic functions
  sparc32,leon: SMP power down implementation
  sparc32,leon: added some SMP comments
  sparc: add {read,write}*_be routines
  sparc32,leon: don't rely on bootloader to mask IRQs
  sparc32,leon: operate on boot-cpu IRQ controller registers
  sparc32: always define boot_cpu_id
  sparc32: removed unused code, implemented by generic code
  sparc32: avoid build warning at mm/percpu.c:1647
  sparc32: always register a PROM based early console
  sparc32: probe for cpu info only during startup
  sparc: consolidate show_cpuinfo in cpu.c
  sparc32,leon: implement genirq CPU affinity
  ...

* 'for-linus' of git://neil.brown.name/md:
  md: allow resync_start to be set while an array is active.
  md/raid10:  reformat some loops with less indenting.
  md/raid10: remove unused variable.
  md/raid10: make more use of 'slot' in raid10d.
  md/raid10: some tidying up in fix_read_error
  md/raid1: improve handling of pages allocated for write-behind.
  md/raid1: try fix_sync_read_error before process_checks.
  md/raid1: tidy up new functions: process_checks and fix_sync_read_error.
  md/raid1: split out two sub-functions from sync_request_write
  md: make error_handler functions more uniform and correct.
  md/multipath: discard ->working_disks in favour of ->degraded
  md/raid1: clean up read_balance.
  md: simplify raid10 read_balance
  md/bitmap: fix saving of events_cleared and other state.
  md: reject a re-add request that cannot be honoured.
  md: Fix race when creating a new md device.

Fix new kernel-doc Error and Warning in <net/mac80211.h>:

  Error(linux-2.6.39-git5/include/net/mac80211.h:550): cannot understand prototype: 'struct ieee80211_sched_scan_ies '
  Warning(linux-2.6.39-git5/include/net/mac80211.h:2289): No description found for parameter 'sta'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The setup_smep function gets calle at resume time too, and is thus not a
pure __init function.  When marked as __init, it gets thrown out after
the kernel has initialized, and when the kernel is suspended and
resumed, the code will no longer be around, and we'll get a nice "kernel
tried to execute NX-protected page" oops because the page is no longer
marked executable.
Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e66eed65 ("list: remove prefetching from regular list
iterators") removed the include of prefetch.h from list.h.  The skbuff
list traversal still had them.

Quoth David Miller:
  "Please just remove the prefetches.

  Those are modelled after list.h as I intend to eventually convert
  SKB list handling to "struct list_head" but we're not there yet.

  Therefore if we kill prefetches from list.h we should kill it from
  these things in skbuff.h too."
Requested-by: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After discovering that wide use of prefetch on modern CPUs
could be a net loss instead of a win, net drivers which were
relying on the implicit inclusion of prefetch.h via the list
headers showed up in the resulting cleanup fallout.  Give
them an explicit include via the following $0.02 script.

 =========================================
 #!/bin/bash
 MANUAL=""
 for i in `git grep -l 'prefetch(.*)' .` ; do
 	grep -q '<linux/prefetch.h>' $i
 	if [ $? = 0 ] ; then
 		continue
 	fi

 	(	echo '?^#include <linux/?a'
 		echo '#include <linux/prefetch.h>'
 		echo .
 		echo w
 		echo q
 	) | ed -s $i > /dev/null 2>&1
 	if [ $? != 0 ]; then
 		echo $i needs manual fixup
 		MANUAL="$i $MANUAL"
 	fi
 done
 echo ------------------- 8\<----------------------
 echo vi $MANUAL
 =========================================
Signed-off-by: Paul <paul.gortmaker@windriver.com>
[ Fixed up some incorrect #include placements, and added some
  non-network drivers and the fib_trie.c case    - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix following sparc (32 bit) build error:

  CC      arch/sparc/kernel/asm-offsets.s
In file included from include/linux/seqlock.h:29:0,
                 from include/linux/time.h:8,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:57,
                 from arch/sparc/kernel/asm-offsets.c:13:
include/linux/spinlock.h: In function 'spin_unlock_wait':
include/linux/spinlock.h:360:2: error: implicit declaration of function 'cpu_relax'

Most likely caused by commit e66eed65 ("list: remove
prefetching from regular list iterators") due to include
changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

I still happen to believe that I$ miss costs are a major thing, but
sadly, -Os doesn't seem to be the solution.  With or without it, gcc
will miss some obvious code size improvements, and with it enabled gcc
will sometimes make choices that aren't good even with high I$ miss
ratios.

For example, with -Os, gcc on x86 will turn a 20-byte constant memcpy
into a "rep movsl".  While I sincerely hope that x86 CPU's will some day
do a good job at that, they certainly don't do it yet, and the cost is
higher than a L1 I$ miss would be.

Some day I hope we can re-enable this.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'viafb-next' of git://github.com/schandinat/linux-2.6: (24 commits)
  viafb: Automatic OLPC XO-1.5 configuration
  viafb: remove unused CEA mode
  viafb: try to map less memory in case of failure
  viafb: use write combining for video ram
  viafb: add X server compatibility mode
  viafb: reduce OLPC refresh a bit
  viafb: fix OLPC XO 1.5 device connection
  viafb: fix OLPC DCON refresh rate
  viafb: delete clock and PLL initialization
  viafb: replace custom return values
  viafb: some small cleanup for global variables
  viafb: gather common good, old VGA initialization in one place
  viafb: add engine clock support
  viafb: add VIA slapping capability
  viafb: split clock and PLL code to an extra file
  viafb: add primary/secondary clock on/off switches
  viafb: add clock source selection and PLL power management support
  viafb: prepare for PLL separation
  viafb: call viafb_get_clk_value only in viafb_set_vclock
  viafb: remove unused max_hres/vres
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] wire up syncfs syscall
  [PARISC] wire up the fhandle syscalls
  [PARISC] wire up clock_adjtime syscall
  [PARISC] wire up fanotify syscalls
  [PARISC] prevent speculative re-read on cache flush
  [PARISC] only make executable areas executable
  [PARISC] fix pacache .size with new binutils

Fixes build errors on s390 and probably other archs as well:

  In file included from net/ipv4/ip_forward.c:32:0:
  include/net/udp.h: In function 'udp_csum_outgoing':
  include/net/udp.h:141:2: error: implicit declaration of function 'prefetch'
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes this build error on s390 and probably other archs as well:

  fs/inode.c: In function 'new_inode':
  fs/inode.c:894:2: error: implicit declaration of function 'spin_lock_prefetch'
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[ Happens on architectures that don't define their own prefetch
  functions in <asm/processor.h>, and instead rely on the default
  ones in <linux/prefetch.h>   - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: parallelize login, reconnect, logout
  firewire: sbp2: octlet AT payloads can be stack-allocated
  firewire: sbp2: omit Scsi_Host lock from queuecommand
  firewire: core: use non-reentrant workqueue with rescuer
  firewire: optimize iso queueing by setting wake only after the last packet
  firewire: octlet AT payloads can be stack-allocated
  firewire: ohci: optimize find_branch_descriptor()
  firewire: ohci: avoid separate DMA mapping for small AT payloads
  firewire: ohci: do not start DMA contexts before link is enabled

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  sctp: Fix build failure.
  garp: use kfree_rcu()
  ipv6: copy prefsrc setting when copying route entry

This solves a serious VFS-level bug in nested_symlink (which was
rewritten from do_follow_link), and follows the order of depth tests
that existed before.

The bug triggers a BUG_ON in fs/namei.c:1381, when running racer with
symlink and rename ops.
Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu>
Acked-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit c182f90b ("SCTP: fix race
between sctp_bind_addr_free() and sctp_bind_addr_conflict()") and
commit 1231f0ba ("net,rcu: convert
call_rcu(sctp_local_addr_free) to kfree_rcu()"), happening in
different trees, introduced a build failure.

Simply make the SCTP race fix use kfree_rcu() too.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use kfree_rcu() instead of call_rcu(), remove garp_cleanup_module()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit c3968a85
('ipv6: RTA_PREFSRC support for ipv6 route source address selection')
added support for ipv6 prefsrc as an alternative to ipv6 addrlabels,
but it did not work because the prefsrc entry was not copied.

Cc: Daniel Walter <sahne@0x90.at>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (45 commits)
  crypto: caam - add support for sha512 variants of existing AEAD algorithms
  crypto: caam - remove unused authkeylen from caam_ctx
  crypto: caam - fix decryption shared vs. non-shared key setting
  crypto: caam - platform_bus_type migration
  crypto: aesni-intel - fix aesni build on i386
  crypto: aesni-intel - Merge with fpu.ko
  crypto: mv_cesa - make count_sgs() null-pointer proof
  crypto: mv_cesa - copy remaining bytes to SRAM only when needed
  crypto: mv_cesa - move digest state initialisation to a better place
  crypto: mv_cesa - fill inner/outer IV fields only in HMAC case
  crypto: mv_cesa - refactor copy_src_to_buf()
  crypto: mv_cesa - no need to save digest state after the last chunk
  crypto: mv_cesa - print a warning when registration of AES algos fail
  crypto: mv_cesa - drop this call to mv_hash_final from mv_hash_finup
  crypto: mv_cesa - the descriptor pointer register needs to be set just once
  crypto: mv_cesa - use ablkcipher_request_cast instead of the manual container_of
  crypto: caam - fix printk recursion for long error texts
  crypto: caam - remove unused keylen from session context
  hwrng: amd - enable AMD hw rnd driver for Maple PPC boards
  hwrng: amd - manage resource allocation
  ...

As Ben Hutchings discovered [1], the patch for CVE-2011-1017 (buffer
overflow in ldm_frag_add) is not sufficient.  The original patch in
commit c340b1d6 ("fs/partitions/ldm.c: fix oops caused by corrupted
partition table") does not consider that, for subsequent fragments,
previously allocated memory is used.

[1] http://lkml.org/lkml/2011/5/6/407Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Timo Warns <warns@pre-sense.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 778dd893 ("tmpfs: fix race between umount and swapoff")
forgot the new rules for strict atomic kmap nesting, causing

  WARNING: at arch/x86/mm/highmem_32.c:81

from __kunmap_atomic(), then

  BUG: unable to handle kernel paging request at fffb9000

from shmem_swp_set() when shmem_unuse_inode() is handling swapoff with
highmem in use.  My disgrace again.

See
  https://bugzilla.kernel.org/show_bug.cgi?id=35352Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>