- 09 Jan, 2023 40 commits
-
-
Eric Farman authored
There are two scenarios that need to be addressed here. First, an ORB that does NOT have the Format-2 IDAL bit set could have both a direct-addressed CCW and an indirect-data-address CCW chained together. This means that the IDA CCW will contain a Format-1 IDAL, and can be easily converted to a 2K Format-2 IDAL. But it also means that the direct-addressed CCW needs to be converted to the same 2K Format-2 IDAL for consistency with the ORB settings. Secondly, a Format-1 IDAL is comprised of 31-bit addresses. Thus, we need to cast this IDAL to a pointer of ints while populating the list of addresses that are sent to vfio. Since the result of both of these is the use of the 2K IDAL variants, and the output of vfio-ccw is always a Format-2 IDAL (in order to use 64-bit addresses), make sure that the correct control bit gets set in the ORB when these scenarios occur. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
Today, we allocate memory for a list of IDAWs, and if the CCW being processed contains an IDAL we read that data from the guest into that space. We then copy each IDAW into the pa_iova array, or fabricate that pa_iova array with a list of addresses based on a direct-addressed CCW. Combine the reading of the guest IDAL with the creation of a pseudo-IDAL for direct-addressed CCWs, so that both CCW types have a "guest" IDAL that can be populated straight into the pa_iova array. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
The idal_nr_words() routine works well for 4K IDAWs, but lost its ability to handle the old 2K formats with the removal of 31-bit builds in commit 5a79859a ("s390: remove 31 bit support"). Since there's nothing preventing a guest from generating this IDAW format, let's re-introduce the math for them and use both when calculating the number of IDAWs based on the bits specified in the ORB. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
The intention is to read the first IDAW to determine the starting location of an I/O operation, knowing that the second and any/all subsequent IDAWs will be aligned per architecture. But, this read receives 64-bits of data, which is the size of a Format-2 IDAW. In the event that Format-1 IDAWs are presented, adjust the size of the read to 32-bits. The data will end up occupying the upper word of the target iova variable, so shift it down to the lower word for use as an address. (By definition, this IDAW format uses a 31-bit address, so the "sign" bit will always be off and there is no concern about sign extension.) Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
The rules of an IDAW are fairly simple: Each one can move no more than a defined amount of data, must not cross the boundary defined by that length, and must be aligned to that length as well. The first IDAW in a list is special, in that it does not need to adhere to that alignment, but the other rules still apply. Thus, by reading the first IDAW in a list, the number of IDAWs that will comprise a data transfer of a particular size can be calculated. Let's factor out the reading of that first IDAW with the logic that calculates the length of the list, to simplify the rest of the routine that handles the individual IDAWs. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
There are two possible ways the list of addresses that get passed to vfio are calculated. One is from a guest IDAL, which would be an array of (probably) non-contiguous addresses. The other is built from contiguous pages that follow the starting address provided by ccw->cda. page_array_alloc() attempts to simplify things by pre-populating this array from the starting address, but that's not needed for a CCW with an IDAL anyway so doesn't need to be in the allocator. Move it to the caller in the non-IDAL case, since it will be overwritten when reading the guest IDAL. Remove the initialization of the pa_page output pointers, since it won't be explicitly needed for either case. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
The allocation of our page_array struct calculates the number of 4K pages that would be needed to hold a certain number of bytes. But, since the number of pages that will be pinned is also calculated by the length of the IDAL, this logic is unnecessary. Let's pass that information in directly, and avoid the math within the allocator. Also, let's make this two allocations instead of one, to make it apparent what's happening within here. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
Everything about this allocation is harder than necessary, since the memory allocation is already aligned to our needs. Break them apart for readability, instead of doing the funky arithmetic. Of the structures that are involved, only ch_ccw needs the GFP_DMA flag, so the others can be allocated without it. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
The act of processing a fetched CCW has two components: 1) Process a Transfer-in-channel (TIC) CCW 2) Process any other CCW The former needs to look at whether the TIC jumps backwards into the current channel program or forwards into a new segment, while the latter just processes the CCW data address itself. Rather than passing the chain segment and index within it to the handlers for the above, and requiring each to calculate the elements it needs, simply pass the needed pointers directly. For the TIC, that means the CCW being processed and the location of the entire channel program which holds all segments. For the other CCWs, the page_array pointer is also needed to perform the page pinning, etc. While at it, rename ccwchain_fetch_direct to _ccw, to indicate what it is. The name "_direct" is historical, when it used to process a direct-addressed CCW, but IDAs are processed here too. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
It was suggested [1] that we replace the old copy_from_iova() routine (which pins a page, does a memcpy, and unpins the page) with the newer vfio_dma_rw() interface. This has a modest improvement in the overall time spent through the fsm_io_request() path, and simplifies some of the code to boot. [1] https://lore.kernel.org/r/20220706170553.GK693670@nvidia.com/Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
The output of vfio_ccw is always a Format-2 IDAL, but the code that explicitly sets this is buried in cp_init(). In fact the input is often already a Format-2 IDAL, and would be rejected (via the check in ccwchain_calc_length()) if it weren't, so explicitly setting it doesn't do much. Setting it way down here only makes it impossible to make decisions in support of other IDAL formats. Let's move that to where the rest of the ORB is set up, so that the CCW processing in cp_prefetch() is performed according to the contents of the unmodified guest ORB. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
Currently, vfio-ccw copies the ORB from the io_region to the channel_program struct being built. It then adjusts various pieces of that ORB to the values needed to be used by the SSCH issued by vfio-ccw in the host. This includes setting the subchannel key to the default, presumably because Linux doesn't do anything with non-zero storage keys itself. But it seems wrong to convert every I/O to the default key if the guest itself requested a non-zero subchannel (access) key. Any channel program that sets a non-zero key would expect the same key returned in the SCSW of the IRB, not zero, so best to allow that to occur unimpeded. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
There's no need to send in both the address of the subchannel struct, and an element within it, to populate the ORB. Pass the whole pointer and let cp_get_orb() take the pieces that are needed. Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Eric Farman authored
There is no longer an mdev struct accessible via a channel program struct, but there are some artifacts remaining that mention it. Clean them up. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Normally a user can scroll back with PF7/PF8 if printed messages are outside of the visible screen area. This doesn't work when the kernel crashes, because the scrollback handling is done by the kernel, which is no longer alive after the kernel crash. Add code to always print all dirty lines in the screen buffer, so the user can scroll back with the terminal scrollback keys (Page Up/Down). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Now that lines are converted during output, the RA and SBA no longer need to get updated as an additional step. Instead set them when converting the line. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Make TTY3270_UPDATE_ALL the sum of all TTY3270_* flags, so we don't need any special handling for it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
When activating the view fails (in this case because the 3270 is disconnected) return from the notifer callback. Otherwise the system will deadlock. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Use __packed __aligned instead of __attribute__((packed, aligned(X))); to match the rest of the file. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
In order to use the fs3270 one would need at least the ioctl definitions in uapi. Add two new include files in uapi, which contain: fs3270: ioctl number declarations + returned struct for TUBGETMOD. raw3270: all the orders, attributes and similar stuff used with 3270 terminals. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
fs3270 uses EWRITEA to clear the screen when a user opens /dev/3270/tub. However it misses the attribute byte after the EWRITEA, so (at least) x3270 complains about 'Record too short, missing write flags'. Add the missing flag byte to fix this. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
fix function prototypes split over two lines like: static void foobar(void) Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
remove a duplicate assignment reported by checkpatch. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Fix a few missing braces and wrong placement of braces reported by checkpatch. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Fix a few whitespace errors reported by checkpatch, namely superfluous whitespace, missing spaces and empty lines. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Fix the following checkpatch warning: CHECK: Comparison to NULL could be written "!rp" + if (rp == NULL) Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
move the core processing to __raw3270_activate_view() to reduce the required if/else blocks and indentiion levels. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
WARN_ON_ONCE if list is not empty, and return an error code instead. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Add a small comment to the lock member of struct raw3270_view to make checkpatch happy. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
checkpatch complains about missing argument names in function declarations. Fix it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Fixes a few checkpatch warning about EXPORT_SYMBOL being at the end of the file instead of being next to the functions. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Fix remaining checkpatch issues, like misplaced brackets, whitespace and similar things. No functional change. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
Use msecs_to_jiffies() instead of HZ/10. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
fix the following and similar checkpatch warnings: CHECK: multiple assignments should be avoided + tp->cx = tp->saved_cx = 0; Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
fix the following and similar checkpatch warnings: CHECK: Avoid CamelCase: <ESnormal> + enum { ESnormal, ESesc, ESsquare, ESparen, ESgetpars }; Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
To let the user know about function key bindings, print them next to the Running/History field at the lower right of the screen. Also print the scrollback position. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Sven Schnelle authored
With the previous change this reduces the size of struct tty3270_attribute from four to two bytes. As we have this struct allocated for each character cell, this saves quite some memory. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-