- 07 Oct, 2022 16 commits
-
-
Thomas Zimmermann authored
Add constants for the various commands that the driver can send to the device and update the respective helper functions. No functional changes. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-17-tzimmermann@suse.de
-
Thomas Zimmermann authored
Add register constants for the framebuffer scanout addresses and update the related helper functions. No functional changes. v2: * extract address bytes with helper macros (Javier) * fix comments Signed-off-by:
-
Thomas Zimmermann authored
Add register constants for the video lock. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Add the register constants for setting the color depth. The driver only uses 16bpp. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Add constants for the registers the contain various display-mode parameters and update the mode-setting function. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Move the existing register constants to a new file in preparation of adding more of them. Renaming is intentional. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Use a damage iterator to process damage areas individually. Merging damage areas can result in large updates of unchanged framebuffer regions. As USB is rather slow, it's better to process damage areas individually and hence minimize USB-transfered data. As part of the change, move drm_gem_fb_{begin,end}_cpu_access() into the plane's atomic_update helper. To avoid overhead and intermediate writers, we want to synchronize buffers and reserve access only once before copying damage areas of the framebuffer. v2: * clarify commit message (Javier) Signed-off-by: -
Thomas Zimmermann authored
Add drm_dev_enter() and drm_dev_exit() to the various modesetting functions that interact with the device. After hot-unplugging the device, these functions will return early. So far, the udl driver relied on USB interfaces to handle unplugging of the device. Signed-off-by:
-
Thomas Zimmermann authored
Inline a modesetting helper in the CRTC's enable function. Build the command set directly in the USB URB's buffer and drop an intermediate buffer. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace simple-KMS helpers with regular atomic-modesetting helpers. The simple-KMS helpers introduce a mid-layer abstraction without added functionality. Using regular atomic helpers makes the driver's implementation more discoverable and simplifies code sharing. The conversion effectively open-codes the simple-KMS functions and data structure within udl. No functional changes. v2: * don't use the atomic_disable plane helper Signed-off-by:
-
Thomas Zimmermann authored
Remove the empty function udl_simple_display_pipe_mode_valid() and let simple-KMS helpers accept the modes. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Move the connector next to the rest of the modesetting code. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Add style fixes, better error handling and reporting, and minor clean-up changes to the connector code before moving the code to the rest of the modesetting pipeline. Signed-off-by:
-
Thomas Zimmermann authored
Set the USB control-message timeout to the USB default of 5 seconds. Done for consistency with other uses of usb_control_msg() in udl and other drivers. Signed-off-by:
-
Thomas Zimmermann authored
The sku_pixel_limit is a per-device property, similar to the amount of available video memory. Move the respective mode-valid test from the connector to the mode-config structure. Signed-off-by:
-
Thomas Zimmermann authored
Remove the _drm_ infix from struct udl_drm_connector and introduce a macro for upcasting from struct drm_connector. No functional changes. Signed-off-by:
-
- 06 Oct, 2022 1 commit
-
-
Lucas Stach authored
The tile status modifiers can be combined with all of the usual color buffer modifiers. When they are present an additional plane is added to the surfaces to share the tile status buffer. The TS modifiers describe the interpretation of the tag bits in this buffer. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220909093000.3458413-1-l.stach@pengutronix.de
-
- 05 Oct, 2022 5 commits
-
-
Javier Martinez Canillas authored
The drm_atomic_helper_damage_merged() helper merges all the damage clips into one rectangle. If there are multiple damage clips that aren't close to each other, the resulting rectangle could be quite big. Instead of using that function helper, iterate over all the damage clips and update them one by one. Suggested-by:
Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by:
-
Jocelyn Falempe authored
The current ast driver only supports legacy gamma interface. This also fixes a Gnome3/Wayland error which incorrectly adds gamma to atomic commit: "Page flip discarded: CRTC property (GAMMA_LUT) not found" I only tested remotely, so I wasn't able to check that it had an effect on the VGA output. But when activating "Night Light" in Gnome, ast_crtc_load_lut() is called. v2: use the same functions as mgag200. handle 16bits color mode. v3: Check gamma_lut size in atomic check. v4: revert 16bits mode, v1 was correct. make sure gamma table are set when primary plane format changes. remove rgb888 format that is not used. Signed-off-by: -
Jason Yen authored
This chip can not handle aux defer if the host directly program its aux registers to access edid/dpcd. So we need let software to handle the aux defer situation. Signed-off-by:
Jason Yen <jason.yen@paradetech.corp-partner.google.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Christian König authored
Otherwise we would crash if the job is not resubmitted. v2: fix second usage of s_fence->parent as well. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221004132831.134986-1-christian.koenig@amd.com
-
Christian König authored
We leaked dependency fences when processes were beeing killed. Additional to that grab a reference to the last scheduled fence. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220929180151.139751-1-christian.koenig@amd.com
-
- 04 Oct, 2022 16 commits
-
-
Ville Syrjälä authored
Get rid of the confusing version_greater() stuff and simply compare edid->revision directly everwhere. Half the places already did it this way, and since we actually reject any EDID with edid->version!=1 it's a perfectly sane thing to do. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-9-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
For EDID 1.4 the first detailed timing is always preferred, for older EDIDs there was a feature flag to indicate the same. While correct, the code setting that up is rather confusing. Restate it in a slightly more straightforward manner. Reviewed-by:
-
Ville Syrjälä authored
Prefer the timing formula indicated by the range descriptor for generating the non-DMT standard timings. Previously we just used CVT for all EDID 1.4 continuous frequency displays without even checking if the range descriptor indicates otherwise. Now we check the range descriptor first, and fall back to CVT if nothing else was indicated. EDID 1.4 more or less deprecates GTF/GTF2 but there are still a lot of 1.4 EDIDs out there that don't advertise CVT support, so seems safer to use the formula the EDID actually reports as supported. For EDID 1.3 we use GTF2 if indicated (as before), and for EDID 1.2+ we now just use GTF without even checking the feature flag. There seem to be quite a few EDIDs out there that don't set the GTF feature flag but still include a GTF range descriptor and non-DMT standard timings. This to me seems to be roughly what appendix B of EDID 1.4 suggests should be done. Reviewed-by:
-
Ville Syrjälä authored
For some reason we only use the secondary GTF curve for the standard timings. Use it for inferred modes as well. Reviewed-by:
-
Ville Syrjälä authored
Extract the GTF vs. GTF2 logic into a separate function. We'll have a second user soon. Reviewed-by:
-
Ville Syrjälä authored
Since we only use the parsed vrefresh range to determine if VRR should be supported we should only accept continuous frequency displays here. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by:
-
Ville Syrjälä authored
Replace a bunch of hex constants with proper definitions. Reviewed-by:
-
Ville Syrjälä authored
The current comment fails to clarify why we only accept the "range limits only" variant of the range descriptor. Reword it to make some actual sense. Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Ankit Nautiyal authored
Replace multiple log lines with a single log line at the end of parsing HF-VSDB. Also use drm_dbg_kms instead of DRM_DBG_KMS, and add log for DSC1.2 support. v2: Fixed the formatting issues in the logging (Jani). Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by:
-
Ankit Nautiyal authored
DSC capabilities are given in bytes 11-13 of VSDB (i.e. bytes 8-10 of SCDS). Since minimum length of Data block is 7, all bytes greater than 7 must be read only after checking the length of the data block. This patch adds check for data block length before reading relavant DSC bytes. Signed-off-by:
-
Ankit Nautiyal authored
Move the DSC parsing logic into separate function. v2: Rebase. Signed-off-by:
-
Ankit Nautiyal authored
HF-VSDB/SCDB has bits to advertise support for 16, 12 and 10 bpc. If none of the bits are set, the minimum bpc supported with DSC is 8. This patch corrects the min bpc supported to be 8, instead of 0. Fixes: 76ee7b90 ("drm/edid: Parse DSC1.2 cap fields from HFVSDB block") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> v2: s/DSC1.2/DSC 1.2 Signed-off-by:
-
Simon Ser authored
Document flags accepted by the page-flip and atomic IOCTLs. v2 (Pekka): - Mention DRM_EVENT_FLIP_COMPLETE in DRM_MODE_PAGE_FLIP_EVENT docs. - Expand DRM_MODE_ATOMIC_NONBLOCK and DRM_MODE_ATOMIC_ALLOW_MODESET description. v3: - Fix struct field ref syntax (Daniel) - Clarify when artifacts are no longer displayed (Daniel) - Add note about sinks deciding to show artifacts on their own (Pekka, Daniel) v4: - Fix typo (Pekka) Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/505107/
-
Jilin Yuan authored
Delete the redundant word 'on'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
-
Pin-yen Lin authored
Add atomic_pre_enable and atomic_post_disable callback to make sure the bridge is not powered off until atomic_post_disable is called. This prevents a power leakage when it6505 is powered off, but the upstream DRM bridge is still sending display signals. Fixes: b5c84a9e ("drm/bridge: add it6505 driver") Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221004044943.2407781-3-treapking@chromium.org
-
Pin-yen Lin authored
Use pm_runtime_(get|put)_sync to control the bridge power, and add SET_SYSTEM_SLEEP_PM_OPS with pm_runtime_force_(suspend|resume) to it6505 driver. Without SET_SYSTEM_SLEEP_PM_OPS, the bridge will be powered on unnecessarily when no external display is connected. Fixes: b5c84a9e ("drm/bridge: add it6505 driver") Signed-off-by:
-
- 03 Oct, 2022 2 commits
-
-
Wei Yongjun authored
Add spi_device_id entries to silent following SPI warning: SPI driver ws2401-panel has no spi_device_id for samsung,lms380kf01 Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220915163437.2519754-1-weiyongjun@huaweicloud.com
-
Wei Yongjun authored
Add spi_device_id entries to silent following SPI warning: SPI driver tpo-tpg110-panel has no spi_device_id for tpo,tpg110 Signed-off-by:
-
