- 30 Sep, 2011 22 commits
-
-
Julian Andres Klode authored
Change nvec_write_async() to return an integer, 0 by default, a negative error on failure. Change nvec_write_sync() to check the return value and abort if it is negative. Signed-off-by:
Julian Andres Klode <jak@jak-linux.org> Acked-by:
Marc Dietrich <marvin24@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
When the caps lock key is pressed, toggle the associated LED. According to Nvidia code, we should send 0x01 where we sent 0x07, but this does not appear to work correctly on the AC100. Signed-off-by:
-
Julian Andres Klode authored
Forgotten in the last commit(s) which contained the copyrightable material, so let's add it now. I believe that only my nvec.c contributions are copyrightable, nvec.h is just interface naming, so does not deserve that yet. Signed-off-by:
-
Julian Andres Klode authored
The scratch area is not part of the pool and thus gets no allocation message. Printing a free message would be confusing, and the pointer subtraction would be undefined behavior. Signed-off-by:
-
Julian Andres Klode authored
Rewrite the interrupt handler to use a state machine similar to that found in the various kernels for the Advent Vega. This also changes the code to use the new functions introduced in the previous commits. This also merges the rewrite sent in August 2011 by Marc Dietrich, and thus also includes code by him. His original patch can be found on the mailing list. Signed-off-by:
-
Julian Andres Klode authored
Add functions nvec_msg_is_event() and nvec_msg_size() which do just what the say: tell whether the message is an event, and getting the size of the message. Signed-off-by:
-
Julian Andres Klode authored
Introduce nvec_gpio_set_value(), which works like gpio_set_value(), but also creates a debugging message, if that's enabled. Signed-off-by:
-
Julian Andres Klode authored
Introduce two new functions nvec_msg_alloc() and nvec_msg_free() that allocate and free message buffers from the internal pool of messages. Signed-off-by:
-
Marc Dietrich authored
This patch adds config dependencies for the NVEC keyboard, mouse, and power drivers. Signed-off-by:
-
Marc Dietrich authored
This adds the relevant info to the MAINTAINERS file so people can find the right person to blame. Signed-off-by:
-
Marc Dietrich authored
Mostly small stuff only. Hopefully completed during the next release cycle. Signed-off-by:
-
Ilya Petrov authored
This patch adds support for LEDs connect to a nvec. A single brightness property is exported to sysfs. LEDs are selected via bitfields in the brightness value. Also the blinking behavior is selected through this method. Vendors may use different values for different HW designs. Signed-off-by:
Ilya Petrov <ilya.muromec@gmail.com> Signed-off-by:
-
Marc Dietrich authored
The ec command used was for muting, not unmuting. Signed-off-by:
-
Marc Dietrich authored
Rework the tegra slave controller init to look more like in tegra-i2c.c. This makes the nvec init reliable. Also add de-init of the slave to be used during suspend. Signed-off-by:
-
Marc Dietrich authored
Split of the previous patch and the next by Marc, as that patch is not strictly a coding style fix only. Signed-off-by:
-
Marc Dietrich authored
This patch fixes coding style and adds copyright notices. Signed-off-by:
-
Julian Andres Klode authored
Those headers were apparently included by other headers previously, but are not anymore. Signed-off-by:
-
Kevin McKinney authored
This patch alters a line of code to make it more readable and easier to understand. The purpose of the original line of code was to compute the amount of memory to request from kmalloc. This mulit-step algorithm was being done in one line of code, thus making it more difficult to understand. Therefore, I split this algorithm into three logical steps. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Signed-off-by:
-
Kevin McKinney authored
This patch fixes two issues within bcm/Bcmchar.c. The first condition in the or statement checks if variable IoBuffer.OutputLength, defined from user space, is greater than the maximum value allowed for an unsigned short. IoBuffer.OutputLength is then used in a kmalloc call to return a pointer to memory. If this size is greater than an unsigned short, it becomes useless. The second condition in the or statement checks if the same variable, IoBuffer.OutputLength is equal to zero before invoking the kmalloc call. In this case, if a zero size is sent to kmalloc, a valid pointer to memory is returned instead of the expected NULL. Signed-off-by:
-
Haiyang Zhang authored
Checking carrier status in netvsc_open() is not necessary. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Dan Carpenter authored
param->u.wpa_key.key_len comes from the user. If it's too large we would write past the end of the array. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jonathan Cameron authored
This was originally there to avoid churn during a complex change. Now everything is stable lets get rid of this as it is missleading and confusing. Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
- 27 Sep, 2011 18 commits
-
-
K. Y. Srinivasan authored
Now that all vmbus audit related comments have been addressed, update the TODO file to reflect this. Signed-off-by:
-
David Kilroy authored
to declare wireless handlers. Signed-off-by:
David Kilroy <kilroyd@googlemail.com> Signed-off-by:
-
David Kilroy authored
WE21 clarified that ESSID should not be NULL terminated. The existing code didn't NULL terminate, but did play with length and then reset it again. Just stop it. Signed-off-by:
-
David Kilroy authored
WEXT changes between versions 15 and 21 have been taken care of, so update the declared support. Signed-off-by:
-
David Kilroy authored
Add recently added events to the capabilities reported in iw_range. Use capability macros instead of assuming the array offsets. Explicitly list scan capabilities. Signed-off-by:
-
Christopher Rice authored
drivers: staging: comedi: cb_das16_cs.c fixed over 80 line issue, and removed a space before tab issue. Signed-off-by:
Christopher Rice <rice.christopher.a@gmail.com> Signed-off-by:
-
Johannes Thumshirn authored
Added log subject to printk()s in drivers/staging/comedi/drivers/pcmmio.c. Signed-off-by:
Johannes Thumshirn <morbidrsa@googlemail.com> Signed-off-by:
-
Dan Carpenter authored
Smatch has a new check for Rosenberg type information leaks where structs are copied to the user with uninitialized stack data in them. In this path, the .uLinkRate member doesn't get initialized so I've set it to zero. Signed-off-by:
-
Marcos Paulo de Souza authored
In the source file there are a lot of warnings. I will send it in parts to be more easy to review. All the changes in this file its just alignment, and things like that. Signed-off-by:
Marcos Paulo de Souza <marcos.mage@gmail.com> Signed-off-by:
-
Mark Einon authored
This driver has a long standing bug where removing and inserting the ethernet cable results in no packets being trnasmitted / received and hence no autonegotiation occurring. Fixed by resetting the rx/tx engines and queue on detecting a cable being removed. Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Mark Einon authored
et131x_check_mii no longer exists, remove its declaration from the header file Signed-off-by:
-
Mark Einon authored
In et131x_netdev.c, a series of calls to enable and diasble the rx/tx engine and queue are being used in several different places. Create two functions to encapsulate these calls, and replace many calls with just the one. Signed-off-by:
-
Mark Einon authored
et131x_check_mii() is now only being called from et131x_adjust_link. Removed this call and associated subroutines, putting the functionality directly into et131x_adjust_link(), in preparation for further simplification. Changed register checks from bare BMSR checks to use phydev/netif versions, also now uses adapter->link to track link state changes. Signed-off-by:
-
Mark Einon authored
This will be used to determine if the link state has changed when the phydev informs the et131x that a change has occurred (in et131x_adjust_link) Signed-off-by:
-
Mark Einon authored
Not an exhaustive dump of the et131x registers, used while debugging a specific problem - seems a shame not to keep it around. Signed-off-by:
-
Alan Cox authored
Add support for GTT based scrolling. Instead of pushing bits around we simply use the GTT to change the mappings. This provides us with a very fast way to scroll the display providing we have enough memory to allocate on 4K line boundaries. In practice this seems to be the case except for very big displays such as HDMI. It works out nicely on the usual configurations are netbooks and tablets. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
If we are the console then a printk can hit us with a spin lock held (and in fact the kernel will do its best to take printing lock). In that case we cannot politely sleep when synching after an accelerated op but must behave obnixously to be sure of getting the bits out. Signed-off-by:
-
Jonathan Cameron authored
Silly bug introduced during the chrdev merge series. Signed-off-by:
-
