Pull ACPI fixes from Rafael Wysocki:
 "These add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA and
  fix an ACPI processor idle issue leading to triple-faults in Xen HVM
  guests and an ACPI backlight driver issue that causes GPUs to
  misbehave while their children power is being fixed up.

  Specifics:

   - Avoid powering up GPUs while attempting to fix up power for their
     children (Hans de Goede)

   - Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead()
     so as to avoid triple-falts during CPU online in Xen HVM guests due
     to the setting of the hardirqs_enabled flag in safe_halt() (David
     Woodhouse)

   - Add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA (Hans
     de Goede)"

* tag 'acpi-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA
  ACPI: video: Use acpi_device_fix_up_power_children()
  ACPI: PM: Add acpi_device_fix_up_power_children() function
  ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()

Pull power management fix from Rafael Wysocki:
 "Fix a syntax error in the sleepgraph utility which causes it to exit
  early on every invocation (David Woodhouse)"

* tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: tools: Fix sleepgraph syntax error

Pull AFS fixes from David Howells:

 - Fix the afs_server_list struct to be cleaned up with RCU

 - Fix afs to translate a no-data result from a DNS lookup into ENOENT,
   not EDESTADDRREQ for consistency with OpenAFS

 - Fix afs to translate a negative DNS lookup result into ENOENT rather
   than EDESTADDRREQ

 - Fix file locking on R/O volumes to operate in local mode as the
   server doesn't handle exclusive locks on such files

 - Set SB_RDONLY on superblocks for RO and Backup volumes so that the
   VFS can see that they're read only

* tag 'afs-fixes-20231124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Mark a superblock for an R/O or Backup volume as SB_RDONLY
  afs: Fix file locking on R/O volumes to operate in local mode
  afs: Return ENOENT if no cell DNS record can be found
  afs: Make error on cell lookup failure consistent with OpenAFS
  afs: Fix afs_server_list to be cleaned up with RCU

Merge ACPI backlight driver fixes and an ACPI processor driver fix for
6.7-rc3:

 - Avoid powering up GPUs while attempting to fix up power for their
   children (Hans de Goede).

 - Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead()
   so as to avoid triple-falts during CPU online in Xen HVM guests due
   to the setting of the hardirqs_enabled flag in safe_halt() (David
   Woodhouse).

* acpi-video:
  ACPI: video: Use acpi_device_fix_up_power_children()
  ACPI: PM: Add acpi_device_fix_up_power_children() function

* acpi-processor:
  ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()

Pull vfs fixes from Christian Brauner:

 - Avoid calling back into LSMs from vfs_getattr_nosec() calls.

   IMA used to query inode properties accessing raw inode fields without
   dedicated helpers. That was finally fixed a few releases ago by
   forcing IMA to use vfs_getattr_nosec() helpers.

   The goal of the vfs_getattr_nosec() helper is to query for attributes
   without calling into the LSM layer which would be quite problematic
   because incredibly IMA is called from __fput()...

     __fput()
       -> ima_file_free()

   What it does is to call back into the filesystem to update the file's
   IMA xattr. Querying the inode without using vfs_getattr_nosec() meant
   that IMA didn't handle stacking filesystems such as overlayfs
   correctly. So the switch to vfs_getattr_nosec() is quite correct. But
   the switch to vfs_getattr_nosec() revealed another bug when used on
   stacking filesystems:

     __fput()
       -> ima_file_free()
          -> vfs_getattr_nosec()
             -> i_op->getattr::ovl_getattr()
                -> vfs_getattr()
                   -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
                      -> security_inode_getattr() # calls back into LSMs

   Now, if that __fput() happens from task_work_run() of an exiting task
   current->fs and various other pointer could already be NULL. So
   anything in the LSM layer relying on that not being NULL would be
   quite surprised.

   Fix that by passing the information that this is a security request
   through to the stacking filesystem by adding a new internal
   ATT_GETATTR_NOSEC flag. Now the callchain becomes:

     __fput()
       -> ima_file_free()
          -> vfs_getattr_nosec()
             -> i_op->getattr::ovl_getattr()
                -> if (AT_GETATTR_NOSEC)
                          vfs_getattr_nosec()
                   else
                          vfs_getattr()
                   -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()

 - Fix a bug introduced with the iov_iter rework from last cycle.

   This broke /proc/kcore by copying too much and without the correct
   offset.

 - Add a missing NULL check when allocating the root inode in
   autofs_fill_super().

 - Fix stable writes for multi-device filesystems (xfs, btrfs etc) and
   the block device pseudo filesystem.

   Stable writes used to be a superblock flag only, making it a per
   filesystem property. Add an additional AS_STABLE_WRITES mapping flag
   to allow for fine-grained control.

 - Ensure that offset_iterate_dir() returns 0 after reaching the end of
   a directory so it adheres to getdents() convention.

* tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  libfs: getdents() should return 0 after reaching EOD
  xfs: respect the stable writes flag on the RT device
  xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
  block: update the stable_writes flag in bdev_add
  filemap: add a per-mapping stable writes flag
  autofs: add: new_inode check in autofs_fill_super()
  iov_iter: fix copy_page_to_iter_nofault()
  fs: Pass AT_GETATTR_NOSEC flag to getattr interface function

Pull drm fixes from Dave Airlie:
 "Back to regular scheduled fixes pull request, mainly a bunch of msm,
  some i915 and otherwise a few scattered, one memory crasher in the
  nouveau GSP paths is helping stabilise that work.

  msm:
   - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream
   - Remove duplicate call to drm_kms_helper_poll_init() in
     msm_drm_init()
   - Fix the safe_lut_tbl[] for sc8280xp to match downstream
   - Don't attach the drm_dp_set_subconnector_property() for eDP
   - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise
     there is a bootup crash on multiple targets
   - Remove unnecessary NULL check left behind during cleanup

  i915:
   - Fix race between DP MST connectore registration and setup
   - Fix GT memory leak on probe error path

  panel:
   - Fixes for innolux and auo,b101uan08.3 panel.
   - Fix Himax83102-j02 timings.

  ivpu:
   - Fix ivpu MMIO reset.

  ast:
   - AST fix on connetor disconnection.

  nouveau:
   - gsp memory corruption fix

  rockchip:
   - color fix"

* tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm:
  nouveau/gsp: allocate enough space for all channel ids.
  drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP
  drm/ast: Disconnect BMC if physical connector is connected
  accel/ivpu/37xx: Fix hangs related to MMIO reset
  drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full
  drm/i915: do not clean GT table on error path
  drm/i915/dp_mst: Fix race between connector registration and setup
  drm/panel: simple: Fix Innolux G101ICE-L01 timings
  drm/panel: simple: Fix Innolux G101ICE-L01 bus flags
  drm/msm: remove unnecessary NULL check
  drm/panel: auo,b101uan08.3: Fine tune the panel power sequence
  drm/msm/dp: attach the DP subconnector property
  drm/msm/dp: don't touch DP subconnector property in eDP case
  drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog
  drm/msm: remove exra drm_kms_helper_poll_init() call
  drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy

Mark a superblock that is for for an R/O or Backup volume as SB_RDONLY when
mounting it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

AFS doesn't really do locking on R/O volumes as fileservers don't maintain
state with each other and thus a lock on a R/O volume file on one
fileserver will not be be visible to someone looking at the same file on
another fileserver.

Further, the server may return an error if you try it.

Fix this by doing what other AFS clients do and handle filelocking on R/O
volume files entirely within the client and don't touch the server.

Fixes: 6c6c1d63 ("afs: Provide mount-time configurable byte-range file locking emulation")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or
cellservdb config file record) can be found rather than returning
EDESTADDRREQ.

Also add cell name lookup info to the cursor dump.

Fixes: d5c32c89 ("afs: Fix cell DNS lookup")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Pull ata fix from Damien Le Moal:

 - Add a missing error check in the adapter initialization of the
   pata_isapnp driver (Chen)

* tag 'ata-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_isapnp: Add missing error check for devm_ioport_map()

Pull block fixes from Jens Axboe:
 "A bit bigger than usual at this time, but nothing really earth
  shattering:

   - NVMe pull request via Keith:
       - TCP TLS fixes (Hannes)
       - Authentifaction fixes (Mark, Hannes)
       - Properly terminate target names (Christoph)

   - MD pull request via Song, fixing a raid5 corruption issue

   - Disentanglement of the dependency mess in nvme introduced with the
     tls additions. Now it should actually build on all configs (Arnd)

   - Series of bcache fixes (Coly)

   - Removal of a dead helper (Damien)

   - s390 dasd fix (Muhammad, Jan)

   - lockdep blk-cgroup fixes (Ming)"

* tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux: (33 commits)
  nvme: tcp: fix compile-time checks for TLS mode
  nvme: target: fix Kconfig select statements
  nvme: target: fix nvme_keyring_id() references
  nvme: move nvme_stop_keep_alive() back to original position
  nbd: pass nbd_sock to nbd_read_reply() instead of index
  s390/dasd: protect device queue against concurrent access
  s390/dasd: resolve spelling mistake
  block/null_blk: Fix double blk_mq_start_request() warning
  nvmet-tcp: always initialize tls_handshake_tmo_work
  nvmet: nul-terminate the NQNs passed in the connect command
  nvme: blank out authentication fabrics options if not configured
  nvme: catch errors from nvme_configure_metadata()
  nvme-tcp: only evaluate 'tls' option if TLS is selected
  nvme-auth: set explanation code for failure2 msgs
  nvme-auth: unlock mutex in one place only
  block: Remove blk_set_runtime_active()
  nbd: fix null-ptr-dereference while accessing 'nbd->config'
  nbd: factor out a helper to get nbd_config without holding 'config_lock'
  nbd: fold nbd config initialization into nbd_alloc_config()
  bcache: avoid NULL checking to c->root in run_cache_set()
  ...

Pull io_uring fixes from Jens Axboe:
 "A fix for ensuring that LINKAT always propagates flags correctly, and
  a fix for an off-by-one in segment skipping for registered buffers.

  Both heading to stable as well"

* tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linux:
  io_uring: fix off-by one bvec index
  io_uring/fs: consider link->flags when getting path for LINKAT

Pull HID fixes from Jiri Kosina:

 - revert of commit that caused regression to many Logitech unifying
   receiver users (Jiri Kosina)

 - power management fix for hid-mcp2221 (Hamish Martin)

 - fix for race condition between HID core and HID debug (Charles Yi)

 - a couple of assorted device-ID-specific quirks

* tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad
  HID: hid-asus: reset the backlight brightness level on resume
  HID: hid-asus: add const to read-only outgoing usb buffer
  Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration"
  HID: add ALWAYS_POLL quirk for Apple kb
  HID: glorious: fix Glorious Model I HID report
  HID: fix HID device resource race between HID core and debugging support
  HID: apple: add Jamesdonkey and A3R to non-apple keyboards list
  HID: mcp2221: Allow IO to start during probe
  HID: mcp2221: Set driver data before I2C adapter add

Merge tag 'drm-intel-fixes-2023-11-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v6.7-rc3:
- Fix race between DP MST connectore registration and setup
- Fix GT memory leak on probe error path
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y1eol98h.fsf@intel.com

Fixes for v6.7-rc3:
- Panel fixes for innolux and auo,b101uan08.3 panel.
- Fix ivpu MMIO reset.
- AST fix on connetor disconnection.
- nouveau gsp fix.
- rockchip color fix.
- Fix Himax83102-j02 timings.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/12322257-2e0c-43d3-8241-876aafc10e4a@linux.intel.com

Fixes for v6.7-rc3:

- Fix the VREG_CTRL_1 for 4nm CPHY to match downstream
- Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init()
- Fix the safe_lut_tbl[] for sc8280xp to match downstream
- Don't attach the drm_dp_set_subconnector_property() for eDP
- Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise
  there is a bootup crash on multiple targets
- Remove unnecessary NULL check left behind during cleanup
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkna3P3mvaF53n2ARJACaXQU+OFfShayTrsUVmqCOmNQ@mail.gmail.com

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf.

  Current release - regressions:

   - Revert "net: r8169: Disable multicast filter for RTL8168H and
     RTL8107E"

   - kselftest: rtnetlink: fix ip route command typo

  Current release - new code bugs:

   - s390/ism: make sure ism driver implies smc protocol in kconfig

   - two build fixes for tools/net

  Previous releases - regressions:

   - rxrpc: couple of ACK/PING/RTT handling fixes

  Previous releases - always broken:

   - bpf: verify bpf_loop() callbacks as if they are called unknown
     number of times

   - improve stability of auto-bonding with Hyper-V

   - account BPF-neigh-redirected traffic in interface statistics

  Misc:

   - net: fill in some more MODULE_DESCRIPTION()s"

* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
  tools: ynl: fix duplicate op name in devlink
  tools: ynl: fix header path for nfsd
  net: ipa: fix one GSI register field width
  tls: fix NULL deref on tls_sw_splice_eof() with empty record
  net: axienet: Fix check for partial TX checksum
  vsock/test: fix SEQPACKET message bounds test
  i40e: Fix adding unsupported cloud filters
  ice: restore timestamp configuration after device reset
  ice: unify logic for programming PFINT_TSYN_MSK
  ice: remove ptp_tx ring parameter flag
  amd-xgbe: propagate the correct speed and duplex status
  amd-xgbe: handle the corner-case during tx completion
  amd-xgbe: handle corner-case during sfp hotplug
  net: veth: fix ethtool stats reporting
  octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
  net: usb: qmi_wwan: claim interface 4 for ZTE MF290
  Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
  net/smc: avoid data corruption caused by decline
  nfc: virtual_ncidev: Add variable to check if ndev is running
  dpll: Fix potential msg memleak when genlmsg_put_reply failed
  ...

We don't support CRUD-inspired message types in YNL too well.
One aspect that currently trips us up is the fact that single
message ID can be used in multiple commands (as the response).
This leads to duplicate entries in the id-to-string tables:

devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init]
   19 |         [DEVLINK_CMD_PORT_NEW] = "port-new",
      |                                  ^~~~~~~~~~
devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’)

Fixes tag points at where the code was generated, the "real" problem
is that the code generator does not support CRUD.

Fixes: f2f9dd16 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The makefile dependency is trying to include the wrong header:

<command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory

The guard also looks wrong.

Fixes: f14122b2 ("tools: ynl: Add source files for nfsd netlink protocol")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register
is 24 bits (not 20 bits) starting with IPA v5.0.  Fix this.

Fixes: faf0678e ("net: ipa: add IPA v5.0 GSI register definitions")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzkaller discovered that if tls_sw_splice_eof() is executed as part of
sendfile() when the plaintext/ciphertext sk_msg are empty, the send path
gets confused because the empty ciphertext buffer does not have enough
space for the encryption overhead. This causes tls_push_record() to go on
the `split = true` path (which is only supposed to be used when interacting
with an attached BPF program), and then get further confused and hit the
tls_merge_open_record() path, which then assumes that there must be at
least one populated buffer element, leading to a NULL deref.

It is possible to have empty plaintext/ciphertext buffers if we previously
bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path.
tls_sw_push_pending_record() already handles this case correctly; let's do
the same check in tls_sw_splice_eof().

Fixes: df720d28 ("tls/sw: Use splice_eof() to flush")
Cc: stable@vger.kernel.org
Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Due to a typo, the code checked the RX checksum feature in the TX path.

Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tune message length calculation to make this test work on machines
where 'getpagesize()' returns >32KB. Now maximum message length is not
hardcoded (on machines above it was smaller than 'getpagesize()' return
value, thus we get negative value and test fails), but calculated at
runtime and always bigger than 'getpagesize()' result. Reproduced on
aarch64 with 64KB page size.

Fixes: 5c338112 ("test/vsock: rework message bounds test")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a VF tries to add unsupported cloud filter through virtchnl
then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but
this error code is stored in 'ret' instead of 'aq_ret' that
is used as error code sent back to VF. In this scenario where
one of the mentioned functions fails the value of 'aq_ret'
is zero so the VF will incorrectly receive a 'success'.

Use 'aq_ret' to store return value and remove 'ret' local
variable. Additionally fix the issue when filter allocation
fails, in this case no notification is sent back to the VF.

Fixes: e284fc28 ("i40e: Add and delete cloud filter")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
ice: restore timestamp config after reset

Jake Keller says:

We recently discovered during internal validation that the ice driver has
not been properly restoring Tx timestamp configuration after a device reset,
which resulted in application failures after a device reset.

After some digging, it turned out this problem is two-fold. Since the
introduction of the PTP support the driver has been clobbering the storage
of the current timestamp configuration during reset. Thus after a reset, the
driver will no longer perform Tx or Rx timestamps, and will report
timestamp configuration as disabled if SIOCGHWTSTAMP ioctl is issued.

In addition, the recently merged auxiliary bus support code missed that
PFINT_TSYN_MSK must be reprogrammed on the clock owner for E822 devices.
Failure to restore this register configuration results in the driver no
longer responding to interrupts from other ports. Depending on the traffic
pattern, this can either result in increased latency responding to
timestamps on the non-owner ports, or it can result in the driver never
reporting any timestamps. The configuration of PFINT_TSYN_MSK was only done
during initialization. Due to this, the Tx timestamp issue persists even if
userspace reconfigures timestamping.

This series fixes both issues, as well as removes a redundant Tx ring field
since we can rely on the skb flag as the primary detector for a Tx timestamp
request.

Note that I don't think this series will directly apply to older stable
releases (even v6.6) as we recently refactored a lot of the PTP code to
support auxiliary bus. Patch 2/3 only matters for the post-auxiliary bus
implementation. The principle of patch 1/3 and 3/3 could apply as far back
as the initial PTP support, but I don't think it will apply cleanly as-is.
====================

Link: https://lore.kernel.org/r/20231121211259.3348630-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset()
to disable timestamping while the device is resetting. This operation
destroys the user requested configuration. While the driver does call
ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings
after a reset, it unconditionally passes true or false, resulting in
failure to restore previous user space configuration.

This results in a device reset forcibly disabling timestamp configuration
regardless of current user settings.

This was not detected previously due to a quirk of the LinuxPTP ptp4l
application. If ptp4l detects a missing timestamp, it enters a fault state
and performs recovery logic which includes executing SIOCSHWTSTAMP again,
restoring the now accidentally cleared configuration.

Not every application does this, and for these applications, timestamps
will mysteriously stop after a PF reset, without being restored until an
application restart.

Fix this by replacing ice_ptp_cfg_timestamp() with two new functions:

1) ice_ptp_disable_timestamp_mode() which unconditionally disables the
   timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release()

2) ice_ptp_restore_timestamp_mode() which calls
   ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration,
   calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and
   issues an immediate TSYN_TX interrupt to ensure that timestamps which
   may have occurred during the device reset get processed.

Modify the ice_ptp_set_timestamp_mode to directly save the user
configuration and then call ice_ptp_restore_timestamp_mode. This way, reset
no longer destroys the saved user configuration.

This obsoletes the ice_set_tx_tstamp() function which can now be safely
removed.

With this change, all devices should now restore Tx and Rx timestamping
functionality correctly after a PF reset without application intervention.

Fixes: 77a78115 ("ice: enable receive hardware timestamping")
Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit d938a8cc ("ice: Auxbus devices & driver for E822 TS") modified
how Tx timestamps are handled for E822 devices. On these devices, only the
clock owner handles reading the Tx timestamp data from firmware. To do
this, the PFINT_TSYN_MSK register is modified from the default value to one
which enables reacting to a Tx timestamp on all PHY ports.

The driver currently programs PFINT_TSYN_MSK in different places depending
on whether the port is the clock owner or not. For the clock owner, the
PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before
calling ice_ptp_tx_ena_intr to program the PHY ports.

For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during
ice_ptp_init_port.

If a large enough device reset occurs, the PFINT_TSYN_MSK register will be
reset to the default value in which only the PHY associated directly with
the PF will cause the Tx timestamp interrupt to trigger.

The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a
device reset. For the E822 device, this results in the PF no longer
responding to interrupts for other ports. This results in failure to
deliver Tx timestamps to user space applications.

Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify
the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place.
This function will program both registers according to the combination of
user configuration and device requirements.

This ensures that PFINT_TSYN_MSK is always restored when we configure the
Tx timestamp interrupt.

Fixes: d938a8cc ("ice: Auxbus devices & driver for E822 TS")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx
ring variable to see if timestamping is enabled on that ring. This value is
set for all rings whenever userspace configures Tx timestamping.

Ostensibly this was done to avoid wasting cycles checking other fields when
timestamping has not been enabled. However, for Tx timestamps we already
get an individual per-SKB flag indicating whether userspace wants to
request a timestamp on that packet. We do not gain much by also having
a separate flag to check for whether timestamping was enabled.

In fact, the driver currently fails to restore the field after a PF reset.
Because of this, if a PF reset occurs, timestamps will be disabled.

Since this flag doesn't add value in the hotpath, remove it and always
provide a timestamp if the SKB flag has been set.

A following change will fix the reset path to properly restore user
timestamping configuration completely.

This went unnoticed for some time because one of the most common
applications using Tx timestamps, ptp4l, will reconfigure the socket as
part of its fault recovery logic.

Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Raju Rangoju says:

====================
amd-xgbe: fixes to handle corner-cases

This series include bug fixes to amd-xgbe driver.
====================

Link: https://lore.kernel.org/r/20231121191435.4049995-1-Raju.Rangoju@amd.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.

Address this by propagating correct information.

Fixes: 7c12aa08 ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The existing implementation uses software logic to accumulate tx
completions until the specified time (1ms) is met and then poll them.
However, there exists a tiny gap which leads to a race between
resetting and checking the tx_activate flag. Due to this the tx
completions are not reported to upper layer and tx queue timeout
kicks-in restarting the device.

To address this, introduce a tx cleanup mechanism as part of the
periodic maintenance process.

Fixes: c5aa9e3b ("amd-xgbe: Initial AMD 10GbE platform driver")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Force the mode change for SFI in Fixed PHY configurations. Fixed PHY
configurations needs PLL to be enabled while doing mode set. When the
SFP module isn't connected during boot, driver assumes AN is ON and
attempts auto-negotiation. However, if the connected SFP comes up in
Fixed PHY configuration the link will not come up as PLL isn't enabled
while the initial mode set command is issued. So, force the mode change
for SFI in Fixed PHY configuration to fix link issues.

Fixes: e57f7a3f ("amd-xgbe: Prepare for working with more than one type of phy")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fix a possible misalignment between page_pool stats and tx xdp_stats
reported in veth_get_ethtool_stats routine.
The issue can be reproduced configuring the veth pair with the
following tx/rx queues:

$ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \
 numtxqueues 1 numrxqueues 1

and loading a simple XDP program on v0 that just returns XDP_PASS.
In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1.
Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN
since we always report xdp_stats for all tx queues in ethtool.

Fixes: 4fc41805 ("net: veth: add page_pool stats")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

It is possible to add a ntuple rule which would like to direct packet to
a VF whose number of queues are greater/less than its PF's queue numbers.
For example a PF can have 2 Rx queues but a VF created on that PF can have
8 Rx queues. As of today, ntuple rule will reject rule because it is
checking the requested queue number against PF's number of Rx queues.
As a part of this fix if the action of a ntuple rule is to move a packet
to a VF's queue then the check is removed. Also, a debug information is
printed to aware user that it is user's responsibility to cross check if
the requested queue number on that VF is a valid one.

Fixes: f0a1913f ("octeontx2-pf: Add support for ethtool ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up
from option driver.
The proper configuration is:

Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0189 Rev= 0.00
S:  Manufacturer=ZTE, Incorporated
S:  Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When CONFIG_NVME_KEYRING is enabled as a loadable module, but the TCP
host code is built-in, it fails to link:

arm-linux-gnueabi-ld: drivers/nvme/host/tcp.o: in function `nvme_tcp_setup_ctrl':
tcp.c:(.text+0x1940): undefined reference to `nvme_tls_psk_default'

The problem is that the compile-time conditionals are inconsistent here,
using a mix of #ifdef CONFIG_NVME_TCP_TLS, IS_ENABLED(CONFIG_NVME_TCP_TLS)
and IS_ENABLED(CONFIG_NVME_KEYRING) checks, with CONFIG_NVME_KEYRING
controlling whether the implementation is actually built.

Change it to use IS_ENABLED(CONFIG_NVME_KEYRING) checks consistently,
which should help readability and make it less error-prone. Combining
it with the check for the ctrl->opts->tls flag lets the compiler drop
all the TLS code in configurations without this feature, which also
helps runtime behavior in addition to avoiding the link failure.

To make it possible for the compiler to build the dead code, both
the tls_handshake_timeout variable and the TLS specific members
of nvme_tcp_queue need to be moved out of the #ifdef block as well,
but at least the former of these gets optimized out again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231122224719.4042108-4-arnd@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

When the NVME target code is built-in but its TCP frontend is a loadable
module, enabling keyring support causes a link failure:

x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a2110): undefined reference to `nvme_keyring_id'

The problem is that CONFIG_NVME_TARGET_TCP_TLS is a 'bool' symbol that
depends on the tristate CONFIG_NVME_TARGET_TCP, so any 'select' from
it inherits the state of the tristate symbol rather than the intended
CONFIG_NVME_TARGET one that contains the actual call.

The same thing is true for CONFIG_KEYS, which itself is required for
NVME_KEYRING.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231122224719.4042108-3-arnd@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

In configurations without CONFIG_NVME_TARGET_TCP_TLS, the keyring
code might not be available, or using it will result in a runtime
failure:

x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a2110): undefined reference to `nvme_keyring_id'

Add a check to ensure we only check the keyring if there is a chance
of it being used, which avoids both the runtime and link-time
problems.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231122224719.4042108-2-arnd@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'loongarch-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix several build errors, a potential kernel panic, a cpu hotplug
  issue and update links in documentations"

* tag 'loongarch-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  Docs/zh_CN/LoongArch: Update links in LoongArch introduction.rst
  Docs/LoongArch: Update links in LoongArch introduction.rst
  LoongArch: Implement constant timer shutdown interface
  LoongArch: Mark {dmw,tlb}_virt_to_page() exports as non-GPL
  LoongArch: Silence the boot warning about 'nokaslr'
  LoongArch: Add __percpu annotation for __percpu_read()/__percpu_write()
  LoongArch: Record pc instead of offset in la_abs relocation
  LoongArch: Explicitly set -fdirect-access-external-data for vmlinux
  LoongArch: Add dependency between vmlinuz.efi and vmlinux.efi

Merge tag 'hyperv-fixes-signed-20231121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - One fix for the KVP daemon (Ani Sinha)

 - Fix for the detection of E820_TYPE_PRAM in a Gen2 VM (Saurabh Sengar)

 - Micro-optimization for hv_nmi_unknown() (Uros Bizjak)

* tag 'hyperv-fixes-signed-20231121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Use atomic_try_cmpxchg() to micro-optimize hv_nmi_unknown()
  x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM
  hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles