- 06 Nov, 2014 40 commits
-
-
Lucas Stach authored
The general agreed way to specify a fixed line number for a serial console is to provide a "serial" alias in the devicetree. Start parsing this property in of_serial. Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aaron Sierra authored
Check the return value of ioremap_nocache to make sure we got a valid mapping. Signed-off-by:
Aaron Sierra <asierra@xes-inc.com> Signed-off-by:
-
Aaron Sierra authored
Several init/setup functions passed the PCI BAR resource start address to ioremap_nocache() via an unsigned long. This caused address truncation for a 32-bit device mapped above 4 GiB (i.e. the CPU interacts with the device via a translated address), which resulted in a kernel panic. This patch replaces all of the instances of intermediate variable use with pci_ioremap_bar() to ensure the full resource_size_t start address is used and that ioremap_nocache() is still called. The kernel panic (Exar XR17V358 PCIe device on a Freescale P2020 SBC): Machine check in kernel mode. Caused by (from MCSR=10008): Bus - Read Data Bus Error Oops: Machine check, sig: 7 [#1] SMP NR_CPUS=2 X-ES P2020 Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.15-xes_r2-00002-g560e401 #978 task: bf850000 ti: bffee000 task.ti: bf84c000 NIP: 80318e10 LR: 80319ecc CTR: 80318dfc REGS: bffeff10 TRAP: 0204 Not tainted (3.14.15-xes_r2-00002-g560e401) MSR: 00021000 <CE,ME> CR: 20adbe42 XER: 00000000 DEAR: c1058001 ESR: 00000000 GPR00: 00000000 bf84db30 bf850000 80cb4af8 00000001 00000000 80000007 80000000 GPR08: bf837c9c c1058001 00000001 00000000 80000007 00000000 80002a10 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 80cb0000 80c72dc4 GPR24: 80cb4900 fffffffe 00029000 00000001 bf8c11e8 ffffffea 80c72ce4 80cb4af8 NIP [80318e10] mem_serial_in+0x14/0x28 LR [80319ecc] serial8250_config_port+0x160/0xe38 Call Trace: [bf84db30] [80319d94] serial8250_config_port+0x28/0xe38 (unreliable) [bf84db60] [80315e3c] uart_add_one_port+0x148/0x3a4 [bf84dbf0] [8031bf40] serial8250_register_8250_port+0x2dc/0x3c8 [bf84dc20] [8032111c] pciserial_init_ports+0xd4/0x1c0 [bf84dd50] [803212f8] pciserial_init_one+0xf0/0x224 [bf84dd90] [802d8ff4] local_pci_probe+0x34/0x8c [bf84dda0] [802d92c8] pci_device_probe+0x84/0xa0 [bf84ddc0] [80329ee0] driver_probe_device+0xac/0x26c [bf84dde0] [8032a15c] __driver_attach+0xbc/0xc0 [bf84de00] [80328388] bus_for_each_dev+0x90/0xcc [bf84de30] [80329cd0] driver_attach+0x24/0x34 [bf84de40] [80328e28] bus_add_driver+0x104/0x1fc [bf84de60] [8032a8c8] driver_register+0x70/0x138 [bf84de70] [802d93c0] __pci_register_driver+0x48/0x58 [bf84de80] [8077e0e4] serial_pci_driver_init+0x24/0x34 [bf84de90] [80002228] do_one_initcall+0x34/0x1b0 [bf84df00] [80764294] kernel_init_freeable+0x138/0x1e8 [bf84df30] [80002a24] kernel_init+0x14/0x108 [bf84df40] [8000ef94] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 800800c4 7d290214 39290001 7c0004ac 7ca049ae 7c0004ac 4e800020 88030035 81230008 7c840030 7d292214 7c0004ac <88690000> 0c030000 4c00012c 5463063e ---[ end trace e3c16443b5d573c6 ]--- Signed-off-by:
-
Jingchang Lu authored
This adds 32-bit register lpuart32 power management support, this also updates the 8-bit register lpuart resume function. Signed-off-by:
Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by:
-
Maxime Ripard authored
We are removing the dmaengine_device_control API, that shouldn't even have been exposed in the first place. Change the callers to use the proper API. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Eddie Huang authored
In mtk8250_set_termios function, calculating quot value can not be zero, otherwise, using DIV_ROUND_CLOSEST(port->uartclk, quot * baud) will fail due to divisor is zero. Signed-off-by:
Eddie Huang <eddie.huang@mediatek.com> Signed-off-by:
-
Kevin Cernekee authored
I wrote this driver and use it daily on several machines for work, so why not. Signed-off-by:
Kevin Cernekee <cernekee@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Kevin Cernekee authored
We don't really need to perform the ioremap "on demand" so it's simpler just to do it from the probe function. This also lets us eliminate the UART_REG_SIZE constant and rely on the resource information passed in from the DT or platform code. Signed-off-by:
-
Kevin Cernekee authored
This enables early console output if there is a chosen/stdout-path property referencing a UART node with the "brcm,bcm6345-uart" compatible string. The bootloader sets up the pinmux and baud/parity/etc. Tested on bcm3384 (MIPS, DT). Signed-off-by:
-
Kevin Cernekee authored
This squashes a checkpatch warning on my new bcm3384 dts submission. Signed-off-by:
-
Kevin Cernekee authored
Remove the extra '<' character. Signed-off-by:
-
Kevin Cernekee authored
Remove incorrect "bcm963xx_uart" module name; add a list of known users; tweak grammar/indentation/capitalization. Signed-off-by:
-
Kevin Cernekee authored
The original non-DT bcm63xx clk code ignores the struct device argument and looks up a global clock name. DT platforms, by contrast, often just use a phandle to reference a clock node with no "clock-output-names" property. Modify the UART driver to support both schemes. Signed-off-by:
-
Kevin Cernekee authored
This device was originally supported on bcm63xx only, but it shows up on a wide variety of MIPS and ARM chipsets spanning multiple product lines. Now that the driver has eliminated dependencies on bcm63xx-specific header files, we can build it on any non-bcm63xx kernel. Compile-tested on x86, both statically and as a module. Tested for functionality on bcm3384 (a new MIPS platform under active development). Signed-off-by:
-
Daniel Thompson authored
For the console poll usage, .poll_init() will perform deeper hardware initialization to ensure the serial port is always active. Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Dirk Behme <dirk.behme@de.bosch.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Huang Shijie <b32955@freescale.com> Cc: linux-serial@vger.kernel.org Signed-off-by:
-
Daniel Thompson authored
imx_put_poll_char() has been simplified to remove the code to disable interrupts. The present code can corrupt register state when re-entered from FIQ handler. Switch to _relaxed() MMIO functions (which are safe for polled I/O and needed to avoid taking spin locks). Signed-off-by:
-
Stephen Boyd authored
We rely on probe order of this driver to determine the line number for the uart port. This makes it impossible to know the line number when these devices are populated via DT. Use the DT alias mechanism to assign the line based on the aliases node. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Stephen Boyd authored
We need to issue a reset if we ever change the value of the IPR register on DM hardware. If we don't reset the hardware the RX stale interrupt never triggers and the only way to trigger an RX handling event is by filling up the fifo. This causes things like getty to not work so well considering it might change the baud rate a few times. Fix this by moving the reset on startup and any reprogramming required after the reset to be after we change the baud rate. Signed-off-by:
-
Stephen Boyd authored
To properly support sysrq on uartDM hardware we need to properly handle break characters. With the DM hardware the fifo can pack 4 characters at a time, where a break is indicated by an all zero byte. Unfortunately, we can't differentiate between an all zero byte for a break and an all zero byte of data, so try and do as best we can. First unmask the RX break start interrupt and record the interrupt when it arrives. Then while processing the fifo, detect the break by searching for an all zero character as long as we recently received an RX break start interrupt. This should make sysrq work fairly well. Cc: Frank Rowand <frank.rowand@sonymobile.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Stephen Boyd authored
The handle_rx() path calls uart_handle_sysrq_char() with the port lock held. This causes a spinlock recursion. Release and reacquire the lock here to avoid this. BUG: spinlock recursion on CPU#0, swapper/0 lock: msm_uart_ports+0x1e0/0x2d0, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0 CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-rc7-00012-gb38ee8265941 #69 [<c0013964>] (unwind_backtrace) from [<c0011f74>] (show_stack+0x10/0x14) [<c0011f74>] (show_stack) from [<c004ed1c>] (do_raw_spin_lock+0x11c/0x13c) [<c004ed1c>] (do_raw_spin_lock) from [<c02d44c0>] (msm_console_write+0x78/0x188) [<c02d44c0>] (msm_console_write) from [<c0052880>] (call_console_drivers.constprop.22+0xb4/0x144) [<c0052880>] (call_console_drivers.constprop.22) from [<c0053570>] (console_unlock+0x27c/0x4ac) [<c0053570>] (console_unlock) from [<c0053bb4>] (vprintk_emit+0x1f4/0x5a8) [<c0053bb4>] (vprintk_emit) from [<c04ad0ac>] (printk+0x30/0x40) [<c04ad0ac>] (printk) from [<c02c2990>] (__handle_sysrq+0x58/0x1b8) [<c02c2990>] (__handle_sysrq) from [<c02d41b0>] (msm_irq+0x694/0x6f8) [<c02d41b0>] (msm_irq) from [<c0055740>] (handle_irq_event_percpu+0x58/0x270) [<c0055740>] (handle_irq_event_percpu) from [<c0055994>] (handle_irq_event+0x3c/0x5c) [<c0055994>] (handle_irq_event) from [<c0057e84>] (handle_level_irq+0x9c/0x138) [<c0057e84>] (handle_level_irq) from [<c005509c>] (generic_handle_irq+0x24/0x38) [<c005509c>] (generic_handle_irq) from [<c000f730>] (handle_IRQ+0x44/0xb0) [<c000f730>] (handle_IRQ) from [<c0008518>] (msm_vic_handle_irq+0x44/0x64) [<c0008518>] (msm_vic_handle_irq) from [<c04b5ac4>] (__irq_svc+0x44/0x7c) Exception stack(0xc0719f68 to 0xc0719fb0) 9f60: 00000001 00000001 00000000 c0722938 c0718000 c0769acc 9f80: 00000000 c0720098 c0769305 4117b362 c0769acc 00000000 01000000 c0719fb0 9fa0: c004cab0 c000f880 20000013 ffffffff [<c04b5ac4>] (__irq_svc) from [<c000f880>] (arch_cpu_idle+0x20/0x30) [<c000f880>] (arch_cpu_idle) from [<c004691c>] (cpu_startup_entry+0xf4/0x23c) [<c004691c>] (cpu_startup_entry) from [<c06d8b70>] (start_kernel+0x32c/0x394) Cc: Frank Rowand <frank.rowand@sonymobile.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Janusz Uzycki authored
Enables PPS support in mxs-auart serial driver to make PPS API working. Signed-off-by:
Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by:
-
Janusz Uzycki authored
Handle CTS/DSR/RI/DCD GPIO interrupts in mxs-auart. Signed-off-by:
-
Janusz Uzycki authored
Dedicated CTS and RTS pins are unusable together with a lot of other peripherals because they share the same line. Pinctrl is limited. Moreover, the AUART controller doesn't handle DTR/DSR/DCD/RI signals, so we have to control them via GPIO. This patch permits to use GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
-
Janusz Uzycki authored
Russell King: The only thing which the .get_mctrl method is supposed to do is to return the state of the /input/ lines, which are CTS, DCD, DSR, RI. The output line state is stored in port->mctrl, and is added to the returned value by serial_core when it's required. RTS output state should not be returned from the .get_mctrl method. This patch removes ctrl variable from mxs_auart_port and removes useless reading back RTS line. The ctrl variable in mxs_auart_port duplicated mctrl, member of uart_port structure in serial_core.h. The removed code from mxs_auart_set_mctrl() and mxs_auart_get_mctrl duplicated uart_update_mctrl() and uart_tiocmget() in serial_core.c. Signed-off-by:
-
Cyrille Pitchen authored
This patch swaps the use "tail" and "head" to fit the semantic of the linux circular buffer documentation: - head: the point at which the producer (the DMA controller) inserts items. - tail: the point at which the consumer (the serial framework) finds the next item. Besides the former code of the rx ring buffer didn't manage the case where head < tail, which might lead to loss of data. To fix this bug the data are now sent from the DMA buffer to the serial framework in two steps: 1 - First, we test if head < tail. If so, we copy the data from tail to the end of the DMA buffer then reset tail to zero. 2 - Finally, we copy data from tail to head then set tail to head. In addition, since tty_insert_flip_string() may now be called twice, atmel_flip_buffer_rx_dma() becomes less efficient than moving the calls dma_sync_sg_for_cpu(), dma_sync_sg_for_device(), tty_insert_flip_string() and tty_flip_buffer_push() directly into atmel_rx_from_dma(). Signed-off-by:Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
John Crispin authored
Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
-
John Crispin authored
Add the config symbol for Mediatek MT7620 SoC to the SERIAL_8250_RT288X dependencies. Signed-off-by:
-
John Crispin authored
The Ralink RT2880 SoC and its successors have an internal 8250 core. This core needs the same quirks applied as the AMD AU1xxx uart. In addition to these quirks, the ports memory region is only 0x100 unlike the AU1xxx which has a size of 0x1000. Signed-off-by:
-
Nishanth Menon authored
Increase the maximum number of consoles possible to 10 since DRA7 now has the maximum number of consoles possible. without doing this, for example, enabling DRA7 UART10 results in internal data structures and console cannot match up and we endup with a crash as follows: [ 1.903503] omap_uart 48424000.serial: [UART-1]: failure [serial_omap_probe]: -22 [ 1.911437] omap_uart: probe of 48424000.serial failed with error -22 [ 1.920379] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 1.928894] pgd = c0004000 [ 1.931732] [00000004] *pgd=00000000 [ 1.935485] Internal error: Oops: 5 [#1] SMP ARM [ 1.940338] Modules linked in: [ 1.943542] CPU: 1 PID: 12 Comm: kworker/1:0 Tainted: G W 3.18.0-rc1-00001-g8821bc4-dirty #6 [ 1.953521] task: ed8a2d00 ti: ed8a4000 task.ti: ed8a4000 [ 1.959197] PC is at process_one_work+0x38/0x4a4 [ 1.964050] LR is at 0x0 [ 1.966705] pc : [<c00548e0>] lr : [<00000000>] psr: 40000093 [ 1.966705] sp : ed8a5ea8 ip : ed8a5ec8 fp : eeb9abc0 [ 1.978759] r10: ed8a4000 r9 : 00000008 r8 : ed842458 [ 1.984252] r7 : 00000000 r6 : eeb9abc0 r5 : ed842440 r4 : edbf26a8 [ 1.991119] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 1.997985] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.005767] Control: 10c5387d Table: 8000406a DAC: 00000015 [ 2.011810] Process kworker/1:0 (pid: 12, stack limit = 0xed8a4248) [ 2.018371] Stack: (0xed8a5ea8 to 0xed8a6000) [ 2.022949] 5ea0: 00000001 00000000 60000093 c008346c 00000001 ed8a5ec8 [ 2.031555] 5ec0: c0054de4 eeb9abc0 ed8a4000 ed842458 00000008 ed8a4000 eeb9abc0 ed842440 [ 2.040161] 5ee0: eeb9abc0 eeb9abf0 ed8a4000 ed842458 00000008 ed8a4000 eeb9abc0 c0054ec4 [ 2.048767] 5f00: ed8a4000 eeb9ac4c a0000053 00000000 ed845bc0 ed842440 c0054d80 00000000 [ 2.057342] 5f20: 00000000 00000000 00000000 c005999c 00000001 00000000 c05eaa64 ed842440 [ 2.065948] 5f40: 00000000 00000000 dead4ead ffffffff ffffffff c097c680 00000000 00000000 [ 2.074554] 5f60: c078acd4 ed8a5f64 ed8a5f64 00000000 00000000 dead4ead ffffffff ffffffff [ 2.083160] 5f80: c097c680 00000000 00000000 c078acd4 ed8a5f90 ed8a5f90 600000d3 ed845bc0 [ 2.091766] 5fa0: c00598d4 00000000 00000000 c000e668 00000000 00000000 00000000 00000000 [ 2.100341] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.108947] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 90005148 11010482 [ 2.117553] [<c00548e0>] (process_one_work) from [<c0054ec4>] (worker_thread+0x144/0x498) [ 2.126159] [<c0054ec4>] (worker_thread) from [<c005999c>] (kthread+0xc8/0xe4) [ 2.133758] [<c005999c>] (kthread) from [<c000e668>] (ret_from_fork+0x14/0x2c) [ 2.141357] Code: e1a04001 e1a05000 e893000f e31e0004 (e5978004) [ 2.147766] ---[ end trace 5798e2803311b69f ]--- <snip> The final solution is to transition off to use 8250 driver and no dependency on console structures and move away from omap-serial driver, hence no major cleanups are done for this driver, so add a simple check to prevent future crashes in a similar manner in case of platform with additional ports. Signed-off-by:
Nishanth Menon <nm@ti.com> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Peter Hurley authored
Commit 479e9b94 ("serial: Refactor uart_flush_buffer() from uart_close") refactored the uart_flush_buffer() in uart_close() into those drivers that define a flush_buffer() method. However, in the amba-pl011 driver configured without CONFIG_DMA_ENGINE, flush_buffer() is a NULL method, so the direct call fails to compile. Check and call the flush_buffer() method through the ops table instead. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Peng Fan authored
This patch fixes sparse warning: "obsolete struct initializer, use C99 syntax" Signed-off-by:
Peng Fan <van.freenix@gmail.com> Signed-off-by:
-
Peter Hurley authored
devm_kzalloc() already warns if allocation fails; remove duplicate message. Signed-off-by:
-
Peter Hurley authored
vt_get_kmsg_redirect() only has meaning to the console driver as an alias for calling vt_kmsg_redirect(). Move the macro definition to the only source file which uses it; remove from uapi/linux/vt.h Signed-off-by:
-
Peter Hurley authored
The last vestige of ASYNC_SPLIT_TERMIOS was removed by commit 'cris: Remove obsolete ASYNC_SPLIT_TERMIOS behavior'. Mark the flag as defunct in the uapi header. Signed-off-by:
-
Peter Hurley authored
ASYNC_SPLIT_TERMIOS behavior is a remnant of the long-dead /dev/cuaXX callout device. Split termios handling was removed tree-wide in v2.5.71 by: commit 99a21ede Author: Alexander Viro <viro@www.linux.org.uk> Date: Wed Jun 11 07:41:28 2003 -0700 [PATCH] tty_driver refcounting killed the last remnants of callout stuff - we don't need to mess with storing termios privately anymore. which pre-dated the re-introduction into the cris serial driver in v2.6.7 by: commit 311a5ffe Author: Andrew Morton <akpm@osdl.org> Date: Mon May 31 18:52:29 2004 -0700 [PATCH] CRIS architecture update From: "Mikael Starvik" <mikael.starvik@axis.com> - Lots of fixes from 2.4. - Updated for 2.6.6. - Added IDE driver Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
Peter Hurley authored
setup_serial_console() is obsolete and has been superseded by early_serial_setup() which is called at the end of the function. The IA64 arch does not call this function; only the m68k arch setup calls this function. Signed-off-by:
-
Peter Hurley authored
serial_console_init() is not defined by the tty core; remove declaration. Note that the powerpc arch boot code contains a serial_console_init() declaration in arch/powerpc/boot/ops.h which is restricted to the powerpc arch boot. Signed-off-by:
-
Peter Hurley authored
pcxe_open() has no definition in mainline; remove declaration. Signed-off-by:
-
Peter Hurley authored
The use of older function ptr calling style, (*fn)(), makes static analysis more error-prone; replace with modern fn() style. Signed-off-by:
-
Peter Hurley authored
tty_hung_up_p() is equivalent to the open-coded test in tty_open(). Signed-off-by:
-
