Avoid spurious interrupts when initializing the device.
Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Avoid spurious interrupts when initializing the device.
Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The hardware volume handling code in essence just detects key presses, and
then does some hardcoded modification of the master volume based on which key
is pressed.

Clearly the right thing to do here is just report these keypresses to
userspace and let userspace decide what to with them.

This patch adds a Kconfig option which when enabled reports the volume
buttons as keypresses using an input device. When enabled this option
also gets rid of the ugly direct ac97 writes from the tasklet, the ac97lock
and the need for using a tasklet in general.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

While working on the sound suspend / resume problems with my laptop
I noticed that the hardware volume handling code in essence just detects
key presses, and then does some hardcoded modification of the master volume
based on which key is pressed.

This made me think that clearly the right thing to do here is just report
these keypresses to userspace and let userspace decide what to with them.

This patch adds a Kconfig option which when enabled reports the volume
buttons as keypresses using an input device. When enabled this option
also gets rid of the ugly direct ac97 writes from the tasklet, the ac97lock
and the need for using a tasklet in general.

As an added bonus the keys now work identical to volume keys on a (usb)
keyboard with multimedia keys, providing visual feedback of the volume
level change, and a better range of the volume control (with a properly
configured desktop environment).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

While working on a fix for the volume being muted on the allegro in my
Compaq EVO N600C after suspend, I've learned a few things about the hardware
volume control worth documenting. The actual fix for the suspend / resume
issue is in the next patch in this set.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Ignore spurious HV interrupts during suspend / resume, this avoids
mistaking them for a mute button press. This is not very pretty but
it seems the only way to fix the master volume control gets muted
after suspend issue I'm seeing. Note that the es1968 driver is doing
exactly the same.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Without this quirk sound stops working after suspend resume. With this quirk,
one still needs to manually unmute the master volume control after a suspend /
/ resume cycle. That is fixed in another patch in this set.

Note that this patch was submitted to the alsa bug tracker a long time ago:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4319Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the support of AudioScience ASI boards.
The driver has been tested for years on alsa-driver external tree,
now finally got merged to the kernel.
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Merge branch 'topic/usb' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into devel

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/gart: Disable GART explicitly before initialization
  dma-debug: Cleanup for copy-loop in filter_write()
  x86/amd-iommu: Remove obsolete parameter documentation
  x86/amd-iommu: use for_each_pci_dev
  Revert "x86: disable IOMMUs on kernel crash"
  x86/amd-iommu: warn when issuing command to uninitialized cmd buffer
  x86/amd-iommu: enable iommu before attaching devices
  x86/amd-iommu: Use helper function to destroy domain
  x86/amd-iommu: Report errors in acpi parsing functions upstream
  x86/amd-iommu: Pt mode fix for domain_destroy
  x86/amd-iommu: Protect IOMMU-API map/unmap path
  x86/amd-iommu: Remove double NULL check in check_device

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: cdev: change license of exported header files to MIT license
  firewire: cdev: comment fixlet
  firewire: cdev: iso packet documentation
  firewire: cdev: fix information leak
  firewire: cdev: require quadlet-aligned headers for transmit packets
  firewire: cdev: disallow receive packets without header

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - switch mode upon system resume
  Revert "Input: wacom - merge out and in prox events"
  Input: matrix_keypad - allow platform to disable key autorepeat
  Input: ALPS - add signature for HP Pavilion dm3 laptops
  Input: i8042 - spelling fix
  Input: sparse-keymap - implement safer freeing of the keymap
  Input: update the status of the Multitouch X driver project
  Input: clarify the no-finger event in multitouch protocol
  Input: bcm5974 - retract efi-broken suspend_resume
  Input: sparse-keymap - free the right keymap on error

When Wacom devices wake up from a sleep, the switch mode command
(wacom_query_tablet_data) is needed before wacom_open is called.
wacom_query_tablet_data should not be executed inside wacom_open
since wacom_open is called more than once during probe.

wacom_retrieve_hid_descriptor is removed from wacom_resume due
to the fact that the required descriptors are stored properly
upon system resume.
Reported-and-tested-by: Anton Anikin <Anton@Anikin.name>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Among else, this allows projects like libdc1394 to carry copies of the
ABI related header files without them or distributors having to worry
about effects on the project's overall license terms.  Switch to MIT
license as suggested by Kristian.  Also update the year in the
copyright statement according to source history.

Cc: Jay Fenlason <fenlason@redhat.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>

Fixed 8 checkpatch errors (ERROR: do not use assignment in if condition)
in sound/i2c/i2c.c.
Signed-off-by: Brian Waters <brianmwaters@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELinux: Reduce max avtab size to avoid page allocation failures

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: use separate class for ceph sockets' sk_lock
  ceph: reserve one more caps space when doing readdir
  ceph: queue_cap_snap should always queue dirty context
  ceph: fix dentry reference leak in dcache readdir
  ceph: decode v5 of osdmap (pool names) [protocol change]
  ceph: fix ack counter reset on connection reset
  ceph: fix leaked inode ref due to snap metadata writeback race
  ceph: fix snap context reference leaks
  ceph: allow writeback of snapped pages older than 'oldest' snapc
  ceph: fix dentry rehashing on virtual .snap dir

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (applesmc) Switch maintainers
  hwmon: (applesmc) Add iMac9,1 and MacBookPro2,2 support
  hwmon: (it87) Invalidate cache on temperature sensor change
  hwmon: (it87) Properly handle wrong sensor type requests
  hwmon: (it87) Don't arbitrarily enable temperature channels
  hwmon: (sht15) Properly handle the case CONFIG_REGULATOR=n
  hwmon: (sht15) Fix sht15_calc_temp interpolation function

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: stop using KVM hypercall mechanism
  lguest: workaround cmpxchg8b_emu by ignoring cli in the guest.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix asm constraints for atomic_sub_and_test() and atomic_add_negative()
  m68k: Fix `struct sigcontext' for ColdFire

Reduce MAX_AVTAB_HASH_BITS so that the avtab allocation is an order 2
allocation rather than an order 4 allocation on x86_64.  This
addresses reports of page allocation failures:
http://marc.info/?l=selinux&m=126757230625867&w=2
https://bugzilla.redhat.com/show_bug.cgi?id=570433Reported-by: Russell Coker <russell@coker.com.au>
Signed-off-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

Recently, we started seeing this on allmodconfig builds:

  CC      mm/memcontrol.o
{standard input}: Assembler messages:
{standard input}:4076: Error: operands mismatch -- statement `subl 12(%fp),170(%a0)' ignored

Correct the asm constraint, like done for m68knommu.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

LibSegFault uses piggybacks sc_fpstate field of the `struct sigcontext'
and this patch avoids LibSegFault overflowing this field.  Also this
removes an unnecessary divergence from classic m68k.
Signed-off-by: Maxim Kuvyrkov <maxim@codesourcery.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Commit ef0658f3 changed precision
from int to s8.

There is existing kernel code that uses a larger precision.

An example from the audit code:
	vsnprintf(...,..., " msg='%.1024s'", (char *)data);
which overflows precision and truncates to nothing.

Extending precision size fixes the audit system issue.

Other changes:

Change the size of the struct printf_spec.type from u16 to u8 so
sizeof(struct printf_spec) stays as small as possible.
Reorder the struct members so sizeof(struct printf_spec) remains 64 bits
without alignment holes.
Document the struct members a bit more.
Original-patch-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Nicolas has expressed a wish to be relieved from the maintenance
of applesmc, so we simply switch maintainer with this patch.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Add the iMac9,1 and the MacBookPro2,2 temperature sensors to hwmon
driver applesmc to fix kernel bug #14429:
https://bugzilla.kernel.org/show_bug.cgi?id=14429Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

When any temperature sensor type is changed, the corresponding
temperature value needs to be updated. The register caching mechanism
may delay this update, so we want to invalidate the cache to force an
immediate update.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Currently, if someone tries to set the thermal sensor type to an
unsupported value, subsequent accesses to the chip may temporarily
show the sensor in question as disabled. Use a temporary variable
and only update the cached value on success, to prevent such
confusion.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Temperature channels can be used in 2 different modes (thermistor and
thermal diode) and we don't know which one, if any, is correct for
every given board. So don't arbitrarily choose one. Instead, leave the
temperature channels untouched. They can be configured from user-space
if needed anyway.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

When CONFIG_REGULATOR isn't set, regulator_get_voltage() returns 0.
Properly handle this case by not trusting the value.
Reported-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

I discovered two issues.
First the previous sht15_calc_temp() loop did not iterate through the
temppoints array since the (data->supply_uV > temppoints[i - 1].vdd)
test is always true in this direction.

Also the two-points linear interpolation function was returning biased
values due to a stray division by 1000 which shouldn't be there.

[JD: Also change the default value for d1 from 0 to something saner.]
Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org

This is a partial revert of 4cd8b5e2 "lguest: use KVM hypercalls";
we revert to using (just as questionable but more reliable) int $15 for
hypercalls.  I didn't revert the register mapping, so we still use the
same calling convention as kvm.

KVM in more recent incarnations stopped injecting a fault when a guest
tried to use the VMCALL instruction from ring 1, so lguest under kvm
fails to make hypercalls.  It was nice to share code with our KVM
cousins, but this was overreach.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Matias Zabaljauregui <zabaljauregui@gmail.com>
Cc: Avi Kivity <avi@redhat.com>

It's only used by cmpxchg8b_emu (see db677ffa for the gory
details), and fixing that to be paravirt aware would be more work than
simply ignoring it (and AFAICT only help lguest).  This makes lguest
work on machines which have cmpxchg8b, for kernels compiled for older
processors.

(We can't emulate it properly: the popf which expects to restore interrupts
does not trap).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: virtualization@lists.osdl.org

This reverts commit 776943fd as it
causes issues with ISDv4 E3 touchscreens:

	https://bugzilla.kernel.org/show_bug.cgi?id=15670Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: user.c, fix SNAPSHOT_SET_SWAP_AREA handling

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFSv4: fix delegated locking
  NFS: Ensure that the WRITE and COMMIT RPC calls are always uninterruptible
  NFS: Fix a race with the new commit code
  NFS: Ensure that writeback_single_inode() calls write_inode() when syncing
  NFS: Fix the mode calculation in nfs_find_open_context
  NFSv4: Fall back to ordinary lookup if nfs4_atomic_open() returns EISDIR