- 27 Oct, 2022 9 commits
-
-
Ville Syrjälä authored
We currently read the ELD buffer size from hardware on g4x, but on ilk+ we just hardcode it to 84 bytes. Let's unify this and just do the hardware readout on all platforms, in case the size changes in the future or something. TODO: should perhaps do the readout during driver init and stash the results somewhere so that we could check that the connector's ELD actually fits and not even try to enable audio in that case... v2: Document the size is in dwords (Jani) Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-10-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
No idea why we do this ELD comparions on g4x before loading the new ELD. Seems entirely pointless so just get rid of it. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
On the "ilk" platforms AUD_CNTL_ST2 is a singleton. Protect it with the audio mutex in case we ever want to do parallel RMW access to it. Currently that should not happen since we only do audio enable/disable from full modesets, and those are fully serialized. But we probably want to think about toggling audio on/off from fastsets too. The hsw codepaths already have the same locking. g4x should not need it since it can only do audio to a single port at a time, which means it's actually broken in more ways than this atm. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Rename a few g4x bits to match the ibx+ bits. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Switch the audio registers to REG_BIT() & co. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
The "ilk" audio codec codepaths have some duplicated code to figure out the correct registers to use on each platform. Extrat that into a single place. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
We don't use the audio code on crestline (CL) since it doesn't support native HDMI output, and SDVO has it's own way of doing audio. And Bearlake-C (BLC) doesn't even exist in the real world, so no point it trying to deal with it. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Remove some leftovers I missed in commit 2dd43144 ("drm/i915: Streamline the artihmetic") Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Rename the 'dev_priv' variables to 'i915' in the audio code to match modern style conventions. v2: Drop some needless braces in intel_audio_hooks_init() Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
- 26 Oct, 2022 8 commits
-
-
Anusha Srivatsa authored
No functional change. Introduce dg2_cdclk_squash_program and move squash_ctl register programming bits to this. v2: s/dg2_cdclk_squash_programming/dg2_cdclk_squash_program (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221025223042.138810-4-anusha.srivatsa@intel.com
-
Anusha Srivatsa authored
No functional change. Moving segments out to simplify bxt_set_cdlck() v2: s/bxt_cdclk_pll/bxt_cdclk_pll_update (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Driver had discrepancy in how cdclk squash and crawl support were checked. Like crawl, add squash as a 1 bit feature flag to the display section of DG2. Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Anusha Srivatsa authored
No functional changes. Changing terminology in some print statements. s/has_cdclk_squasher/has_cdclk_squash, s/crawler/crawl and s/squasher/squash. Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Not all Dekel PHY registers have a lane instance, so having to specify this when using them is awkward. It makes more sense to define each PHY register with its full internal PHY offset where bits 15:12 is the lane for lane-instanced PHY registers and just a register bank index for other PHY registers. This way lane-instanced registers can be referred to with the (tc_port, lane) parameters, while other registers just with a tc_port parameter. An additional benefit of this change is to prevent passing a Dekel register to a generic MMIO access function or vice versa. v2: - Fix parameter reuse in the DKL_REG_MMIO definition. v3: - Rebase on latest patchset version. Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-3-imre.deak@intel.com
-
Imre Deak authored
Move the TypeC DKL PHY register definitions to intel_dkl_phy_regs.h. No functional changes. v2: - Move the definitions to a new intel_dkl_phy_regs.h file. (Jani). v3: - Rebase on latest patchset version. Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
-
Imre Deak authored
An upcoming patch moves the DKL PHY register definitions to intel_dkl_phy_regs.h, so for consistency rename intel_tc_phy_regs.h containing only MG PHY register definitions to intel_mg_phy_regs.h. Suggested-by:
-
Imre Deak authored
Accessing the TypeC DKL PHY registers during modeset-commit, -verification, DP link-retraining and AUX power well toggling is racy due to these code paths being concurrent and the PHY register bank selection register (HIP_INDEX_REG) being shared between PHY instances (aka TC ports) and the bank selection being not atomic wrt. the actual PHY register access. Add the required locking around each PHY register bank selection-> register access sequence. Kudos to Ville for noticing the race conditions. v2: - Add the DKL PHY register accessors to intel_dkl_phy.[ch]. (Jani) - Make the DKL_REG_TC_PORT macro independent of PHY internals. - Move initing the DKL PHY lock to a more logical place. v3: - Fix parameter reuse in the DKL_REG_TC_PORT definition. - Document the usage of phy_lock. v4: - Fix adding TC_PORT_1 offset in the DKL_REG_TC_PORT definition. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Acked-by:
-
- 25 Oct, 2022 5 commits
-
-
Ville Syrjälä authored
Make glk_load_luts() a bit lighter for the common case where neither the degamma LUT nor pipe CSC are enabled by not loading the linear degamma LUT. Making .load_luts() as lightweight as possible is a good idea since it may need to execute from a vblank worker under tight deadlines. My earlier reasoning for always loading the linear degamma LUT was to avoid an extra LUT load when just enabling/disabling the pipe CSC, but that is nonsense since we load the LUTs on every flagged color management change/modeset anyway (either of which is needed for a pipe CSC toggle). We can also get rid of the glk_can_preload_luts() special case since the presence of the degamma LUT will now always match csc_enable. v2: Fix typos (Uma) Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Since we now have a place (pre_csc_lut) to stuff a purely internal LUT we can replace glk_load_degamma_lut_linear() with such a thing and just rely on the normal glk_load_degamma_lut() to load it as well. drm_mode_config_cleanup() will clean this up for us. v2: Pass on the error pointer Drop a hint about this into the state dump Reviewed-by: -
Ville Syrjälä authored
Since we now have the extra step from hw.(de)gamma_lut into {pre,post}_csc_lut let's make sure we didn't forget to assign them appropriately. Ie. basically making sure intel_color_check() was called when necessary (and that it did its job suitable well). Reviewed-by: -
Ville Syrjälä authored
Add an extra remapping step between the logical state of the LUTs (hw.(de)gamma_lut) as specified via uapi/bigjoiner copy vs. the actual state of the LUTs programmed into the hardware. With this we should be finally able finish the (de)gamma readout/state checker support for the remaining platforms (ilk-skl) where the same hardware LUT can be positioned either before or after the pipe CSC unit. Where we position it depends on factors such as presence of the logical degamma LUT, RGB vs. YCbCr output, full vs. limited RGB quantization range. Without the extra remapping step the state readout doesn't really know whether the LUT read from the hardware is the degamma or gamma LUT, and so we is unable to accurately store it into our crtc state. With the remapping step we know exactly where to put it given the order of the LUT vs. CSC in the hardware state. Only the initial hw->uapi state readout done during driver load/resume still has the problem of not really knowing what to do with the LUT(s). But we can just assume 1:1 mapping there and let subsequent commits fix things up. Another benefit is that we now have a place for purely internal LUTs, without complicating the bigjoiner uapi->hw copy logic. This should prove useful for streamlining glk degamma LUT handling. Reviewed-by:
-
Ville Syrjälä authored
Make ilk_load_luts() ready for a degamma lut. Currently we never have one, but soon we may get one from readout, and I think we may want to change the state computation such that we may end up with one even when userspace has simply supplied a gamma lut. At least the code now follows the path laid out by the ivb/bdw counterpars. Reviewed-by:
-
- 22 Oct, 2022 5 commits
-
-
Ville Syrjälä authored
Add a common helper to answer the question "do we need to update color management stuff?". Reviewed-by:
-
Ville Syrjälä authored
Be consistent in whether we flag a full modeset or a fastset for the pipe. intel_modeset_all_pipes() would seem to be the only codepath not getting this right. The other case is when we flag the fastset initially, currently we just clear the mode_changed flag and set the update_pipe flag. But we could still have connectors_changed==true or active_changed==true forcing a full modeset anyway. So check for that after clearing the mode_changed flag. And let's add a WARN to make sure we did get it right. v2: Deal with {connectors,active}_changed Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Signed-off-by: -
Ville Syrjälä authored
These 'mode_changed' booleans aren't very helpful. Just replace them with direct intel_crtc_needs_modeset() calls which is more descriptive. Reviewed-by:
-
Ville Syrjälä authored
Replace the somewhat obscure crtc_state.update_pipe checks with a more descriptive thing. Also nicely matches the intel_crtc_needs_modeset() counterpart for full modesets. v2: Handle one more case in the fbc code Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Signed-off-by:
-
Ville Syrjälä authored
On BDW+ we have just the one set of DP M/N registers. The values we write into said registers depends on whether we want DRRS to be in high or low gear. This causes issues for the state checker which currently has to assume either set of M/N (high or low refresh rate) values may appear there. That sort of works for M/N itself, but all other values derived from the M/N (dotclock, pixel rate) are not handled correctly, leading to potential for state checker mismatches. Let's avoid all those problems by simply keeping DRRS in high gear until the state checker has done its hardware state readout. Note that hitting this issue presumable became very hard after commit 1b333c67 ("drm/i915: Do DRRS disable/enable during pre/post_plane_update()") since the state check would have to laze about for one full second (delay used by intel_drrs_schedule_work()) to see the low refresh rate. But it is still theoretically possible. Signed-off-by:
-
- 21 Oct, 2022 2 commits
-
-
Ville Syrjälä authored
Apparently some panels declare multiple modes with random sync polarities. Seems a bit weird, but looks like Windows/GOP doesn't care, so let follow suit and accept alternate fixed modes regardless of their sync polarities. v2: Don't pollute the DRM_ namespace with a define (Jani) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6968Acked-by:
-
Suraj Kandpal authored
Remove one use macro for_each_connector_on_encoder which is only being used at intel_encoder_find_connector. Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by:
-
- 20 Oct, 2022 2 commits
-
-
Ankit Nautiyal authored
Remove extraline left after intel_dp_configure_protocol_converter. Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
Ankit Nautiyal authored
For cases where DP has HDMI2.1 sink and FRL Link issues are detected, reset the flag to state FRL trained status before restarting FRL training. Fixes: 9488a030 ("drm/i915: Add support for enabling link status and recovery") Cc: Swati Sharma <swati2.sharma@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> (v2) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 19 Oct, 2022 1 commit
-
-
Nirmoy Das authored
Print returned error code for better debuggability. References: https://gitlab.freedesktop.org/drm/intel/-/issues/7211Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014154655.14075-1-nirmoy.das@intel.com
-
- 18 Oct, 2022 4 commits
-
-
Anshuman Gupta authored
DGFX platforms has lmem and cpu can access the lmem objects via mmap and i915 internal i915_gem_object_pin_map() for i915 own usages. Both of these methods has pre-requisite requirement to keep GFX PCI endpoint in D0 for a supported iomem transaction over PCI link. (Refer PCIe specs 5.3.1.4.1) Both DG1/DG2 have a known hardware bug that violates the PCIe specs and support the iomem read write transaction over PCIe bus despite endpoint is D3 state. Due to above H/W bug, we had never observed any issue with i915 runtime PM versus lmem access. But this issue becomes visible when PCIe gfx endpoint's upstream bridge enters to D3, at this point any lmem read/write access will be returned as unsupported request. But again this issue is not observed on every platform because it has been observed on few host machines DG1/DG2 endpoint's upstream bridge does not bind with pcieport driver. which really disables the PCIe power savings and leaves the bridge at D0 state. We need a unique interface to read/write from lmem with runtime PM wakeref protection something similar to intel_uncore_{read, write}, keep autosuspend control to 'on' on all discrete platforms, until we have a unique interface to read/write from lmem. This just change the default autosuspend setting of i915 on dGPU, user can still change it to 'auto'. v2: - Modified the commit message and subject with more information. - Changed the Fixes tag to LMEM support commit. [Joonas] - Changed !HAS_LMEM() Cond to !IS_DGFX(). [Rodrigo] Fixes: b908be54 ("drm/i915: support creating LMEM objects") Suggested-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014113258.1284226-1-anshuman.gupta@intel.com
-
Andrzej Hajda authored
GEN7_DOP_CLOCK_GATE_ENABLE bit should be cleared, not inverse. The bug was introduced during conversion to intel_uncore_rmw helper. Suggested-by:
Matt Roper <matthew.d.roper@intel.com> Fixes: 8cee664d ("drm/i915: use proper helper for register updates") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
Platforms prior to MTL do not have a separate media and graphics version. On platforms where GMD id is not supported, reuse the graphics ip version, release info for media. The rest of the IP graphics, display versions would be copied during driver creation. While at it warn if GMD is not used for platforms greater than gen12. v2: - Use simple assignment to copy contents of the structure(JaniN) Fixes: c2c70752 ("drm/i915: Read graphics/media/display arch version from hw") Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
-
Radhakrishna Sripada authored
Rename struct ip_version to intel_ip_version to comply with the naming conventions for structures. Suggested-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
- 17 Oct, 2022 1 commit
-
-
José Roberto de Souza authored
Workaround 1607297627 was missed for Alderlake-P, so here extending it to it and adding the fixes tag so this WA is backported to all stable kernels. v2: - fixed subject - added Fixes tag BSpec: 54369 Cc: <stable@vger.kernel.org> # v5.17+ Fixes: dfb924e3 ("drm/i915/adlp: Remove require_force_probe protection") Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017132432.112850-1-jose.souza@intel.com
-
- 14 Oct, 2022 1 commit
-
-
Imre Deak authored
The GPU reset involves a display suspend/resume sequence, but this is done without suspending/resuming the encoders. The encoder HW readout code during resume however assumes that the encoders were suspended/resumed, at least on TypeC platforms where the TC PHYs must be left in a disconnected state during encoder-suspend, and the PHY's TypeC mode must be initialized already during encoder-resume. Since the above issue occurs only in case the display recovery during GPU reset is simulated in CI tests (on new platforms w/o the GPU reset clobbering the display), this patch fixes the issue by simply restoring the saved display state in this case w/o doing a display HW state readout / sanitization first. This also fixes the WARN below introduced by commit a82796a2 ("drm/i915: Fix TypeC mode initialization during system resume") <4> [319.983309] ------------[ cut here ]------------ <4> [319.983313] i915 0000:00:02.0: drm_WARN_ON(dig_port->tc_link_refcount != 1) <4> [319.983341] WARNING: CPU: 10 PID: 268 at drivers/gpu/drm/i915/display/intel_tc.c:751 intel_tc_port_sanitize_mode+0x239/0x290 [i915] <4> [319.983407] Modules linked in: fuse snd_hda_codec_hdmi i915 x86_pkg_temp_thermal mei_hdcp coretemp wmi_bmof r8153_ecm cdc_ether kvm_intel usbnet r8152 mii kvm prime_numbers snd_hda_intel ttm snd_intel_dspcfg irqbypass drm_buddy e1000e crct10dif_pclmul snd_hda_codec crc32_pclmul drm_display_helper ptp snd_hwdep ghash_clmulni_intel snd_hda_core drm_kms_helper pps_core mei_me syscopyarea video i2c_i801 snd_pcm sysfillrect i2c_smbus sysimgblt mei fb_sys_fops intel_lpss_pci wmi <4> [319.983483] CPU: 10 PID: 268 Comm: kworker/10:1H Not tainted 6.0.0-rc7-CI_DRM_12200-g394e575b57e9+ #1 <4> [319.983486] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P LP5 RVP, BIOS ADLPFWI1.R00.2313.A00.2107301001 07/30/2021 <4> [319.983488] Workqueue: events_highpri heartbeat [i915] <4> [319.983536] RIP: 0010:intel_tc_port_sanitize_mode+0x239/0x290 [i915] <4> [319.983600] Code: 85 d2 75 03 48 8b 17 48 89 14 24 e8 e1 dc 2d e1 48 8b 14 24 48 c7 c1 f8 db 5b a0 48 c7 c7 3e 3c 5e a0 48 89 c6 e8 45 d7 66 e1 <0f> 0b e9 20 fe ff ff 0f 0b 49 c7 c0 8b 3c 5e a0 e9 9e fe ff ff 48 <4> [319.983601] RSP: 0018:ffffc90001617a30 EFLAGS: 00010286 <4> [319.983604] RAX: 0000000000000000 RBX: ffff88811f9d2000 RCX: 0000000000000001 <4> [319.983606] RDX: 0000000080000001 RSI: ffffffff8231e8cd RDI: 00000000ffffffff <4> [319.983607] RBP: ffff888121e98000 R08: 0000000000000000 R09: c0000000ffffc134 <4> [319.983608] R10: 00000000000d6078 R11: ffffc900016178c8 R12: ffff88811f9d3838 <4> [319.983609] R13: ffff88811f9d397d R14: ffff888121e98000 R15: 0000000000000000 <4> [319.983611] FS: 0000000000000000(0000) GS:ffff8882a7300000(0000) knlGS:0000000000000000 <4> [319.983612] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [319.983613] CR2: 00007fe7397f1e18 CR3: 0000000006612003 CR4: 0000000000770ee0 <4> [319.983615] PKRU: 55555554 <4> [319.983616] Call Trace: <4> [319.983617] <TASK> <4> [319.983621] intel_ddi_sync_state+0x3f/0x90 [i915] <4> [319.983698] intel_modeset_setup_hw_state+0x3a3/0x1440 [i915] <4> [319.983777] ? intel_gt_reset_global+0xeb/0x160 [i915] <4> [319.983839] ? __intel_display_resume+0x15/0xe0 [i915] <4> [319.983909] __intel_display_resume+0x15/0xe0 [i915] <4> [319.983979] intel_display_finish_reset+0x58/0x130 [i915] <4> [319.984048] intel_gt_reset_global+0xf3/0x160 [i915] <4> [319.984107] ? intel_reset_guc.cold.62+0x5d/0x5d [i915] <4> [319.984189] ? 0xffffffff81000000 <4> [319.984192] ? queue_work_node+0x90/0x90 <4> [319.984202] intel_gt_handle_error+0x2c2/0x410 [i915] <4> [319.984267] ? _raw_spin_unlock_irqrestore+0x54/0x70 <4> [319.984271] ? lockdep_hardirqs_on+0xbf/0x140 <4> [319.984276] ? intel_guc_find_hung_context+0x19e/0x1d0 [i915] <4> [319.984352] reset_engine+0x99/0xd0 [i915] <4> [319.984399] ? __drm_printfn_seq_file+0x20/0x20 <4> [319.984406] heartbeat+0x4cd/0x4f0 [i915] <4> [319.984454] process_one_work+0x272/0x5b0 <4> [319.984461] worker_thread+0x37/0x370 <4> [319.984465] ? process_one_work+0x5b0/0x5b0 <4> [319.984467] kthread+0xed/0x120 <4> [319.984470] ? kthread_complete_and_exit+0x20/0x20 <4> [319.984474] ret_from_fork+0x1f/0x30 <4> [319.984484] </TASK> <4> [319.984485] irq event stamp: 36107 <4> [319.984487] hardirqs last enabled at (36113): [<ffffffff811391d6>] __up_console_sem+0x66/0x70 <4> [319.984492] hardirqs last disabled at (36118): [<ffffffff811391bb>] __up_console_sem+0x4b/0x70 <4> [319.984494] softirqs last enabled at (34316): [<ffffffff81e00323>] __do_softirq+0x323/0x48e <4> [319.984497] softirqs last disabled at (34309): [<ffffffff810c16b8>] irq_exit_rcu+0xb8/0xe0 <4> [319.984499] ---[ end trace 0000000000000000 ]--- v2: - Instead of trying to fix the suspend/resume sequence, restore simply the state w/o the HW readout/sanitization step. (Ville) References: https://lore.kernel.org/intel-gfx/20221005175251.3586272-1-imre.deak@intel.com/T/#mcfac180a67f6048096d09fa04347aa088291fafb Closes: https://gitlab.freedesktop.org/drm/intel/issues/7021 Cc: Mika Kahola <mika.kahola@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 11 Oct, 2022 2 commits
-
-
Anusha Srivatsa authored
MTL and dgfx use the same DC5 counter. While at it, this patch also adds the corresponding debugfs entries. Some cleanup wrt dc3co register which makes the code more readable. Driver loads all firmware that it finds in the firmware binary but platform doesn't *need* all of them. Cleaning the previous debugs entries to reflect which firmware is needed and if the needed firmware is loaded or not. MTL needs both Pipe A and Pipe B DMC to be loaded along with Main DMC. BSpec: 49788 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Andrzej Hajda authored
There is special helper for register read/modify/write. Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
