Pull hwmon fixes from Guenter Roeck:
 "Fix word size register read and write operations in ina2xx driver, and
  initialize uninitialized structure elements in twl4030-madc-hwmon
  driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ina2xx) Fix word size register read and write operations
  hwmon: (twl4030-madc-hwmon) Initialize uninitialized structure elements

Pull drm fixes from Dave Airlie:
 "I realise this a bit bigger than I would want at this point.

  Exynos is a large chunk, I got them to half what they wanted already,
  and hey its ARM based, so not going to hurt many people.

  Radeon has only two fixes, but the PLL fixes were a bit bigger, but
  required for a lot of scenarios, the fence fix is really urgent.

  vmwgfx: I've pulled in a dumb ioctl support patch that I was going to
  shove in later and cc stable, but we need it asap, its mainly to stop
  mesa growing a really ugly dependency in userspace to run stuff on
  vmware, and if I don't stick it in the kernel now, everyone will have
  to ship ugly userspace libs to workaround it.

  nouveau: single urgent fix found in F18 testing, causes X to not start
  properly when f18 plymouth is used

  i915: smattering of fixes and debug quieting

  gma500: single regression fix

  So as I said a bit large, but its fairly well scattered and its all
  stuff I'll be shipping in F18's 3.6 kernel."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits)
  drm/nouveau: fix booting with plymouth + dumb support
  drm/radeon: make 64bit fences more robust v3
  drm/radeon: rework pll selection (v3)
  drm: Drop the NV12M and YUV420M formats
  drm/exynos: remove DRM_FORMAT_NV12M from plane module
  drm/exynos: fix double call of drm_prime_(init/destroy)_file_private
  drm/exynos: add dummy support for dmabuf-mmap
  drm/exynos: Add missing braces around sizeof in exynos_mixer.c
  drm/exynos: Add missing braces around sizeof in exynos_hdmi.c
  drm/exynos: Make g2d_pm_ops static
  drm/exynos: Add dependency for G2D in Kconfig
  drm/exynos: fixed page align bug.
  drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/exynos: Use devm_* functions in exynos_drm_g2d.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file
  drm/exynos: Remove redundant check in exynos_drm_fimd.c file
  drm/exynos: Remove redundant check in exynos_hdmi.c file
  vmwgfx: add dumb ioctl support
  gma500: Fix regression on Oaktrail devices
  ...

Pull scheduler fixes from Ingo Molnar:
 "Smaller fixlets"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix kernel-doc warnings in kernel/sched/fair.c
  sched: Unthrottle rt runqueues in __disable_runtime()
  sched: Add missing call to calc_load_exit_idle()
  sched: Fix load avg vs cpu-hotplug

Pull perf fixes from Ingo Molnar:
 "This tree includes various fixes"

Ingo really needs to improve on the whole "explain git pull" part.
"Various fixes" indeed.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/hwpb: Invoke __perf_event_disable() if interrupts are already disabled
  perf/x86: Enable Intel Cedarview Atom suppport
  perf_event: Switch to internal refcount, fix race with close()
  oprofile, s390: Fix uninitialized memory access when writing to oprofilefs
  perf/x86: Fix microcode revision check for SNB-PEBS

Pull a core sparse warning fix from Ingo Molnar

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm/memblock: Use NULL instead of 0 for pointers

Pull networking fixes from David Miller:

 1) Use after free and new device IDs in bluetooth from Andre Guedes,
    Yevgeniy Melnichuk, Gustavo Padovan, and Henrik Rydberg.

 2) Fix crashes with short packet lengths and VLAN in pktgen, from
    Nishank Trivedi.

 3) mISDN calls flush_work_sync() with locks held, fix from Karsten
    Keil.

 4) Packet scheduler gred parameters are reported to userspace
    improperly scaled, and WRED idling is not performed correctly.  All
    from David Ward.

 5) Fix TCP socket refcount problem in ipv6, from Julian Anastasov.

 6) ibmveth device has RX queue alignment requirements which are not
    being explicitly met resulting in sporadic failures, fix from
    Santiago Leon.

 7) Netfilter needs to take care when interpreting sockets attached to
    socket buffers, they could be time-wait minisockets.  Fix from Eric
    Dumazet.

 8) sock_edemux() has the same issue as netfilter did in #7 above, fix
    from Eric Dumazet.

 9) Avoid infinite loops in CBQ scheduler with some configurations, from
    Eric Dumazet.

10) Deal with "Reflection scan: an Off-Path Attack on TCP", from Jozsef
    Kadlecsik.

11) SCTP overcharges socket for TX packets, fix from Thomas Graf.

12) CODEL packet scheduler should not reset it's state every time it
    builds a new flow, fix from Eric Dumazet.

13) Fix memory leak in nl80211, from Wei Yongjun.

14) NETROM doesn't check skb_copy_datagram_iovec() return values, from
    Alan Cox.

15) l2tp ethernet was using sizeof(ETH_HLEN) instead of plain ETH_HLEN,
    oops.  From Eric Dumazet.

16) Fix selection of ath9k chips on which PA linearization and AM2PM
    predistoration are used, from Felix Fietkau.

17) Flow steering settings in mlx4 driver need to be validated properly,
    from Hadar Hen Zion.

18) bnx2x doesn't show the correct link duplex setting, from Yaniv
    Rosner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  pktgen: fix crash with vlan and packet size less than 46
  bnx2x: Add missing afex code
  bnx2x: fix registers dumped
  bnx2x: correct advertisement of pause capabilities
  bnx2x: display the correct duplex value
  bnx2x: prevent timeouts when using PFC
  bnx2x: fix stats copying logic
  bnx2x: Avoid sending multiple statistics queries
  net: qmi_wwan: call subdriver with control intf only
  net_sched: gred: actually perform idling in WRED mode
  net_sched: gred: fix qave reporting via netlink
  net_sched: gred: eliminate redundant DP prio comparisons
  net_sched: gred: correct comment about qavg calculation in RIO mode
  mISDN: Fix wrong usage of flush_work_sync while holding locks
  netfilter: log: Fix log-level processing
  net-sched: sch_cbq: avoid infinite loop
  net: qmi_wwan: fix Gobi device probing for un2430
  net: fix net/core/sock.c build error
  ixp4xx_hss: fix build failure due to missing linux/module.h inclusion
  caif: move the dereference below the NULL test
  ...

Pull USB patches from Greg Kroah-Hartman:
 "Here are a number of USB patches, a bit more than I normally like this
  late in the -rc series, but given people's vacations (myself
  included), and the kernel summit, it seems to have happened this way.

  All are tiny, but they add up.  A number of gadget and xhci fixes, and
  a few new device ids.  All have been tested in linux-next.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low
  usb: chipidea: cleanup dma_pool if udc_start() fails
  usb: chipidea: udc: fix error path in udc_start()
  usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  usb: chipidea: udc: fix setup of endpoint maxpacket size
  USB: option: replace ZTE K5006-Z entry with vendor class rule
  EHCI: Update qTD next pointer in QH overlay region during unlink
  USB: cdc-wdm: fix wdm_find_device* return value
  USB: ftdi_sio: do not claim CDC ACM function
  usb: dwc3: gadget: fix pending isoc handling
  usb: renesas_usbhs: fixup DMA transport data alignment
  usb: gadget: at91udc: Don't check for ep->ep.desc
  usb: gadget: at91udc: don't overwrite driver data
  usb: dwc3: core: fix incorrect usage of resource pointer
  usb: musb: musbhsdma: fix IRQ check
  usb: musb: tusb6010: fix error path in tusb_probe()
  usb: musb: host: fix for musb_start_urb Oops
  usb: gadget: dummy_hcd: add support for USB_DT_BOS on rh
  usb: gadget: dummy_hcd: fixup error probe path
  usb: gadget: s3c-hsotg.c: fix error return code
  ...

Pull TTY fixes from Greg Kroah-Hartman:
 "Here are 2 tiny patches for a serial driver to resolve issues that
  people have reported with the 3.6-rc tree.

  Both of these have been in the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: imx: don't reinit clock in imx_setup_ufcr()
  tty: serial: imx: console write routing is unsafe on SMP

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are a few staging tree fixes for problems that have been
  reported.

  Nothing major, just a number of tiny driver fixes.  All of these have
  been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  drm/omap: add more new timings fields
  drm/omap: update for interlaced
  staging: r8712u: fix bug in r8712_recv_indicatepkt()
  staging: zcache: fix cleancache race condition with shrinker
  Staging: Android alarm: IOCTL command encoding fix
  staging: vt6656: [BUG] - Failed connection, incorrect endian.
  staging: ozwpan: fix memcmp() test in oz_set_active_pd()
  staging: wlan-ng: Fix problem with wrong arguments
  staging: comedi: das08: Correct AO output for das08jr-16-ao
  staging: comedi: das08: Correct AI encoding for das08jr-16-ao
  staging: comedi: das08: Fix PCI ref count
  staging: comedi: amplc_pci230: Fix PCI ref count
  staging: comedi: amplc_pc263: Fix PCI ref count
  staging: comedi: amplc_pc236: Fix PCI ref count
  staging: comedi: amplc_dio200: Fix PCI ref count
  staging: comedi: amplc_pci224: Fix PCI ref count
  drivers/iio/adc/at91_adc.c: adjust inconsistent IS_ERR and PTR_ERR
  staging iio: fix potential memory leak in lis3l02dq_ring.c
  staging:iio: prevent divide by zero bugs

Pull driver core fix from Greg Kroah-Hartman:
 "Here is one fix for 3.6-rc6 for the kobject.h file.

  It fixes a reported oops if CONFIG_HOTPLUG is disabled.  It's been in
  the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kobject: fix oops with "input0: bad kobj_uevent_env content in show_uevent()"

We already use them for openat() and friends, but fstat() also wants to
be able to use O_PATH file descriptors.  This should make it more
directly comparable to the O_SEARCH of Solaris.

Note that you could already do the same thing with "fstatat()" and an
empty path, but just doing "fstat()" directly is simpler and faster, so
there is no reason not to just allow it directly.

See also commit 332a2e12, which did the same thing for fchdir, for
the same reasons.
Reported-by: ольга крыжановская <olga.kryzhanovska@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org    # O_PATH introduced in 3.0+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We noticed a plymouth bug on Fedora 18, and I then
noticed this stupid thinko, fixing it fixed the problem
with plymouth.

Cc: stable@vger.kernel.org
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Alex writes:

This is the current set of radeon fixes for 3.6.  Two small fixes:
- fix the fence issues introduced in 3.5 with 64-bit fences
- PLL fix for multiple DP heads

* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: make 64bit fences more robust v3
  drm/radeon: rework pll selection (v3)

If vlan option is being specified in the pktgen and packet size
being requested is less than 46 bytes, despite being illogical
request, pktgen should not crash the kernel.

BUG: unable to handle kernel paging request at ffff88021fb82000
Process kpktgend_0 (pid: 1184, threadinfo ffff880215f1a000, task ffff880218544530)
Call Trace:
[<ffffffffa0637cd2>] ? pktgen_finalize_skb+0x222/0x300 [pktgen]
[<ffffffff814f0084>] ? build_skb+0x34/0x1c0
[<ffffffffa0639b11>] pktgen_thread_worker+0x5d1/0x1790 [pktgen]
[<ffffffffa03ffb10>] ? igb_xmit_frame_ring+0xa30/0xa30 [igb]
[<ffffffff8107ba20>] ? wake_up_bit+0x40/0x40
[<ffffffff8107ba20>] ? wake_up_bit+0x40/0x40
[<ffffffffa0639540>] ? spin+0x240/0x240 [pktgen]
[<ffffffff8107b4e3>] kthread+0x93/0xa0
[<ffffffff81615de4>] kernel_thread_helper+0x4/0x10
[<ffffffff8107b450>] ? flush_kthread_worker+0x80/0x80
[<ffffffff81615de0>] ? gs_change+0x13/0x13

The root cause of why pktgen is not able to handle this case is due
to comparison of signed (datalen) and unsigned data (sizeof), which
eventually passes a huge number to skb_put().
Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit a3348722 added afex support but lacked
several logical changes. This lack can cause afex to crash, and also
have a slight effect on other flows (i.e., driver always assumes the Tx ring
has less available buffers than what it actually has).

This patch adds the missing segments, fixing said issues.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Under traffic, there are several registers that when read (e.g., via
'ethtool -d') may cause the chip to stall.
This patch corrects the registers read in such flows.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch propagates users' requested flow-control into the link layer,
which will later be used to advertise this flow-control for auto-negotiation
(until now these values were ignored).
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior to this fix, the driver reported the chip's active duplex state
is always 'full', even if using half-duplex mode.
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent updating the xmac PFC configuration when using a link speed
slower than 10G -the umac block is responsible for 1G or slower connections,
therefore it is possible the xmac block is reset when connection is slower.
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

FW needs the driver statistics for management. Current logic is broken
in that the function that gathers the port statistics does not copy
its own statistics to a place where the FW can use it.
This patch causes every function that can pass statistics to the FW to
do so.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During traffic when DCB is enabled, it is possible for multiple instances
of statistics queries to be sent to the chip - this may cause the FW to assert.

This patch prevents the sending of an additional instance of statistics query
while the previous query hasn't completed.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only increase the higher 32bits if we really detect a wrap around.

v2: instead of increasing the higher 32bits just use the higher
    32bits from the last emitted fence.
v3: also use last emitted fence value as upper limit.

The intention of this patch is to make fences as robust as
they where before introducing 64bit fences. This is
necessary because on older systems it looks like the fence
value gets corrupted on initialization.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=51344

Should also fix:
https://bugs.freedesktop.org/show_bug.cgi?id=54129
https://bugs.freedesktop.org/show_bug.cgi?id=54662
https://bugzilla.redhat.com/show_bug.cgi?id=846505
https://bugzilla.redhat.com/show_bug.cgi?id=845639

3.5 needs a separate patch due to changes in the
fence code.  Will send that out separately.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For DP we can use the same PPLL for all active DP
encoders.  Take advantage of that to prevent cases
where we may end up sharing a PPLL between DP and
non-DP which won't work.  Also clean up the code
a bit.

v2: - fix missing pll_id assignment in crtc init
v3: - fix DP PPLL check
    - document functions
    - break in main encoder search loop after matching.
      no need to keep checking additional encoders.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=54471Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This fixes a hang on suspend due to calling wdm_suspend on
the unregistered data interface. The hang should have been
a NULL pointer reference had it not been for a logic error
in the cdc_wdm code.

  commit 230718bd net: qmi_wwan: bind to both control and data interface

changed qmi_wwan to use cdc_wdm as a subdriver for devices with
a two-interface QMI/wwan function.  The commit failed to update
qmi_wwan_suspend and qmi_wwan_resume, which were written to handle
either a single combined interface function, or no subdriver at all.

The result was that we called into the subdriver both when the
control interface was suspended and when the data interface was
suspended.  Calling the subdriver suspend function with an
unregistered interface is not supported and will make the
subdriver bug out.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

gred_dequeue() and gred_drop() do not seem to get called when the
queue is empty, meaning that we never start idling while in WRED
mode. And since qidlestart is not stored by gred_store_wred_set(),
we would never stop idling while in WRED mode if we ever started.
This messes up the average queue size calculation that influences
packet marking/dropping behavior.

Now, we start WRED mode idling as we are removing the last packet
from the queue. Also we now actually stop WRED mode idling when we
are enqueuing a packet.

Cc: Bruce Osler <brosler@cisco.com>
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

q->vars.qavg is a Wlog scaled value, but q->backlog is not. In order
to pass q->vars.qavg as the backlog value, we need to un-scale it.
Additionally, the qave value returned via netlink should not be Wlog
scaled, so we need to un-scale the result of red_calc_qavg().

This caused artificially high values for "Average Queue" to be shown
by 'tc -s -d qdisc', but did not affect the actual operation of GRED.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each pair of DPs only needs to be compared once when searching for
a non-unique prio value.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is a bad idea to hold a spinlock and call flush_work_sync.
Move the workqueue cleanup outside the spinlock and use cancel_work_sync,
on closing the channel this seems to be the more correct function.
Remove the never used and constant return value of mISDN_freebchannel.
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Cc: <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso say:

====================
The following patchset contains four updates for your net tree, they are:

* Fix crash on timewait sockets, since the TCP early demux was added,
  in nfnetlink_log, from Eric Dumazet.

* Fix broken syslog log-level for xt_LOG and ebt_log since printk format was
  converted from <.> to a 2 bytes pattern using ASCII SOH, from Joe Perches.

* Two security fixes for the TCP connection tracking targeting off-path attacks,
  from Jozsef Kadlecsik. The problem was discovered by Jan Wrobel and it is
  documented in: http://mixedbit.org/reflection_scan/reflection_scan.pdf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sound fixes from Takashi Iwai:
 "Just a few small / trivial regression fixes at this time."

* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: ice1724: Use linear scale for AK4396 volume control.
  ALSA: hda_intel: add position_fix quirk for Asus K53E
  ALSA: compress_core: fix open flags test in snd_compr_open()
  ALSA: hda - Fix Oops at codec reset/reconfig
  ALSA: usb-audio: Fix bogus error messages for delay accounting
  ALSA: hda - Fix missing Master volume for STAC9200/925x

Pull arm-soc bug fixes from Olof Johansson:

 - A set of OMAP fixes, about half of them PM/clock related, the rest
   scattered over the platform code but all small and targeted to real
   bugs.
 - Two small i.MX fixes for SSI device clock setup.

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: clk-imx35: Fix SSI clock registration
  ARM: clk-imx25: Fix SSI clock registration
  ARM: OMAP4: Fix array size for irq_target_cpu
  ARM: OMAP4: hwmod data: temporarily comment out data for the sl2if IP block
  ARM: OMAP: hwmod code: Disable module when hwmod enable fails
  ARM: OMAP3: hwmod data: fix iva2 reset info
  ARM: OMAP3xxx: clockdomain: fix software supervised wakeup/sleep
  ARM: OMAP2+: am33xx: Fix the timer fck clock naming convention
  ARM: OMAP: Config fix for omap3-touchbook board
  ARM: OMAP: sram: skip the first 16K on OMAP3 HS
  ARM: OMAP: sram: fix OMAP4 errata handling
  ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER

Pull additional AHCI PCI IDs from Jeff Garzik.

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: Add identifiers for ASM106x devices
  ahci: Add alternate identifier for the 88SE9172
  ahci: Add JMicron 362 device IDs

ARM: i.MX: Fix SSI clock associations for i.MX25/i.MX35

* tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM: clk-imx35: Fix SSI clock registration
  ARM: clk-imx25: Fix SSI clock registration
  + Linux 3.6-rc5

They don't always appear as AHCI class devices but instead as IDE class.

Based on an initial patch by Hiroaki Nito

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42804Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This can also appear as 0x9192. Reported in bugzilla and confirmed with the
board documentation for these boards.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42970Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: The Stables <stable@vger.kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The JMicron JMB362 controller supports AHCI only, but some revisions
use the IDE class code.  These need to be matched by device ID.

These additions have apparently been included by QNAP in their NAS
devices using these controllers.

References: http://bugs.debian.org/634180Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes

Inki Dae writes:
- fix build warnings
- minor code cleanup
- remove non-standard format, DRM_FORMAT_NV12M
- add dummy mmap for exynos dmabuf
  . dma_buf export needs this patch

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm: Drop the NV12M and YUV420M formats
  drm/exynos: remove DRM_FORMAT_NV12M from plane module
  drm/exynos: fix double call of drm_prime_(init/destroy)_file_private
  drm/exynos: add dummy support for dmabuf-mmap
  drm/exynos: Add missing braces around sizeof in exynos_mixer.c
  drm/exynos: Add missing braces around sizeof in exynos_hdmi.c
  drm/exynos: Make g2d_pm_ops static
  drm/exynos: Add dependency for G2D in Kconfig
  drm/exynos: fixed page align bug.
  drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/exynos: Use devm_* functions in exynos_drm_g2d.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file
  drm/exynos: Remove redundant check in exynos_drm_fimd.c file
  drm/exynos: Remove redundant check in exynos_hdmi.c file

The NV12M/YUV420M formats are identical to the NV12/YUV420 formats.
So just remove these duplicated format names.

This might look like breaking the ABI, but the code has never actually
accepted these formats, so nothing can be using them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

this patch removes DRM_FORMAT_NV12M from plane module because this format
is same as DRM_FORMAT_NV12. DRM_FORMAT_NV12M will be identified by
mode_cmd->handles and mode_cmd->offsets fields internally.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>