Merge tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Multiple fixes, cleanups and documentations for Hyper-V core code and
   drivers

* tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: make hv_bus const
  x86/hyperv: Allow 15-bit APIC IDs for VTL platforms
  x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad()
  x86/mm: Regularize set_memory_p() parameters and make non-static
  x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback
  Documentation: hyperv: Add overview of PCI pass-thru device support
  Drivers: hv: vmbus: Update indentation in create_gpadl_header()
  Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header()
  fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem()
  Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory
  hv_utils: Allow implicit ICTIMESYNCFLAG_SYNC

Pull phy fixes from Vinod Koul:

  - qcom: m31 pointer err fix, eusb2 fix redundant zero-out loop and v3
    offset fix on qmp-usb

  - freescale: fix for dphy alias

* tag 'phy-fixes2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: qcom-qmp-usb: fix v3 offsets data
  phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
  phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
  phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes

Pull dmaengine fixes from Vinod Koul:

 - dw-edma fixes to improve driver and remote HDMA setup

 - fsl-edma fixes for SoC hange, irq init and byte calculations and
   sparse fixes

 - idxd: safe user copy of completion record fix

 - ptdma: consistent DMA mask fix

* tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: ptdma: use consistent DMA masks
  dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  dmaengine: idxd: Ensure safe user copy of completion record
  dmaengine: fsl-edma: correct max_segment_size setting
  dmaengine: idxd: Remove shadow Event Log head stored in idxd
  dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
  dmaengine: fsl-qdma: init irq after reg initialization
  dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
  dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
  dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
  dmaengine: dw-edma: Add HDMA remote interrupt configuration
  dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
  dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
  dmaengine: dw-edma: Fix the ch_count hdma callback

Pull powerpc fixes from Michael Ellerman:

 - Fix IOMMU table initialisation when doing kdump over SR-IOV

 - Fix incorrect RTAS function name for resetting TCE tables

 - Fix fpu_signal selftest failures since a recent change

Thanks to Gaurav Batra and Nathan Lynch.

* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix fpu_signal failures
  powerpc/rtas: use correct function name for resetting TCE tables
  powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV

Pull x86 fixes from Borislav Petkov:

 - Do not reserve SETUP_RNG_SEED setup data in the e820 map as it should
   be used by kexec only

 - Make sure MKTME feature detection happens at an earlier time in the
   boot process so that the physical address size supported by the CPU
   is properly corrected and MTRR masks are programmed properly, leading
   to TDX systems booting without disable_mtrr_cleanup on the cmdline

 - Make sure the different address sizes supported by the CPU are read
   out as early as possible

* tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/e820: Don't reserve SETUP_RNG_SEED in e820
  x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers
  x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()

Now that the driver core can properly handle constant struct bus_type,
move the hv_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-hv-v1-1-521bd4140673@marliere.netSigned-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240204-bus_cleanup-hv-v1-1-521bd4140673@marliere.net>

Merge tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "A workaround to suppress the continuous bus resets in the case that
  older devices are connected to the modern 1394 OHCI hardware and
  devices

  In IEEE 1394 Amendment (IEEE 1394a-2000), the short bus reset is added
  to resolve the shortcomings of the long bus reset in IEEE 1394-1995.
  However, it is well-known that the solution is not necessarily
  effective in the mixing environment that both IEEE 1394-1995 PHY and
  IEEE 1394a-2000 (or later) PHY exist, as described in section 8.4.6.2
  of IEEE 1394a-2000.

  The current implementation of firewire stack schedules the short bus
  reset when attempting to resolve the mismatch of gap count in the
  certain generation of bus topology. It can cause the continuous bus
  reset in the issued environment.

  The workaround simply uses the long bus reset instead of the short bus
  reset. It is desirable to detect whether the issued environment or
  not. However, the way to access PHY registers from remote note is
  firstly defined in IEEE 1394a-2000, thus it is not available in the
  case"

* tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: use long bus reset on gap count error

Pull xfs fix from Chandan Babu:
 "Drop experimental warning message when mounting an xfs filesystem on
  an fsdax device. We now consider xfs on fsdax to be stable"

* tag 'xfs-6.8-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: drop experimental warning for FSDAX

Pull gpio fixes from Bartosz Golaszewski:

 - fix resource freeing ordering in error path when adding a GPIO chip

 - only set pins to output after the reset is complete in gpio-74x164

* tag 'gpio-fixes-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: fix resource unwinding order in error path
  gpiolib: Fix the error path order in gpiochip_add_data_with_key()
  gpio: 74x164: Enable output pins after registers are reset

In commit 19416123 ("block: define 'struct bvec_iter' as packed"),
what we need is to save the 4byte padding, and avoid `bio` to spread on
one extra cache line.

It is enough to define it as '__packed __aligned(4)', as '__packed'
alone means byte aligned, and can cause compiler to generate horrible
code on architectures that don't support unaligned access in case that
bvec_iter is embedded in other structures.

Cc: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 19416123 ("block: define 'struct bvec_iter' as packed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "Two small fixes, all in drivers (the more obsolete mpt3sas and the
  newer mpi3mr)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
  scsi: mpi3mr: Reduce stack usage in mpi3mr_refresh_sas_ports()

Pull power supply fixes from Sebastian Reichel:

 - Kconfig dependency fix

 - bq27xxx-i2c: do not free non-existing IRQ

* tag 'for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: bq27xxx-i2c: Do not free non existing IRQ
  power: supply: mm8013: select REGMAP_I2C

Pull iommufd fixes from Jason Gunthorpe:
 "Four syzkaller found bugs:

   - Corruption during error unwind in iommufd_access_change_ioas()

   - Overlapping IDs in the test suite due to out of order destruction

   - Missing locking for access->ioas in the test suite

   - False failures in the test suite validation logic with huge pages"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd/selftest: Don't check map/unmap pairing with HUGE_PAGES
  iommufd: Fix protection fault in iommufd_test_syz_conv_iova
  iommufd/selftest: Fix mock_dev_num bug
  iommufd: Fix iopt_access_list_id overwrite bug

Pull devicetree fix from Rob Herring:
 "One fix for a bug in fw_devlink handling of OF graph. This doesn't
  completely fix the reported problems, but it's with users adding out
  of tree code"

* tag 'devicetree-fixes-for-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: property: fw_devlink: Fix stupid bug in remote-endpoint parsing

Introduced a stupid bug in commit 782bfd03 ("of: property: Improve
finding the supplier of a remote-endpoint property") due to a last minute
incorrect edit of "index !=0" into "!index". This patch fixes it to be
"index > 0" to match the comment right next to it.
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/lkml/20240223171849.10f9901d@booty/
Fixes: 782bfd03 ("of: property: Improve finding the supplier of a remote-endpoint property")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240224052436.3552333-1-saravanak@google.comSigned-off-by: Rob Herring <robh@kernel.org>

Pull RISC-V fixes from Palmer Dabbelt:

 - detect ".option arch" support on not-yet-released LLVM builds

 - fix missing TLB flush when modifying non-leaf PTEs

 - fixes for T-Head custom extensions

 - fix for systems with the legacy PMU, that manifests as a crash on
   kernels built without SBI PMU support

 - fix for systems that clear *envcfg on suspend, which manifests as
   cbo.zero trapping after resume

 - fixes for Svnapot systems, including removing Svnapot support for
   huge vmalloc/vmap regions

* tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Sparse-Memory/vmemmap out-of-bounds fix
  riscv: Fix pte_leaf_size() for NAPOT
  Revert "riscv: mm: support Svnapot in huge vmap"
  riscv: Save/restore envcfg CSR during CPU suspend
  riscv: Add a custom ISA extension for the [ms]envcfg CSR
  riscv: Fix enabling cbo.zero when running in M-mode
  perf: RISCV: Fix panic on pmu overflow handler
  MAINTAINERS: Update SiFive driver maintainers
  drivers: perf: ctr_get_width function for legacy is not defined
  drivers: perf: added capabilities for legacy PMU
  RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
  riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
  riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly
  riscv: add CALLER_ADDRx support
  RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
  kbuild: Add -Wa,--fatal-warnings to as-instr invocation
  riscv: tlb: fix __p*d_free_tlb()

Pull ceph fix from Ilya Dryomov:
 "Catch up with mdsmap encoding rectification which ended up being
  necessary after all to enable cluster upgrades from problematic
  v18.2.0 and v18.2.1 releases"

* tag 'ceph-for-6.8-rc7' of https://github.com/ceph/ceph-client:
  ceph: switch to corrected encoding of max_xattr_size in mdsmap

Pull btrfs fixes from David Sterba:

 - fix freeing allocated id for anon dev when snapshot creation fails

 - fiemap fixes:
     - followup for a recent deadlock fix, ranges that fiemap can access
       can still race with ordered extent completion
     - make sure fiemap with SYNC flag does not race with writes

* tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix double free of anonymous device after snapshot creation failure
  btrfs: ensure fiemap doesn't race with writes when FIEMAP_FLAG_SYNC is given
  btrfs: fix race between ordered extent completion and fiemap

Pull exfat fix from Namjae Jeon:

 - Fix ftruncate failure when allocating non-contiguous clusters

* tag 'exfat-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix appending discontinuous clusters to empty file

Pull vfs fixes from Christian Brauner:
 "Two small fixes:

   - Fix an endless loop during afs directory iteration caused by not
     skipping silly-rename files correctly.

   - Fix reporting of completion events for aio causing leaks in
     userspace. This is based on the fix last week as it's now possible
     to recognize aio events submitted through the old aio interface"

* tag 'vfs-6.8-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs/aio: Make io_cancel() generate completions again
  afs: Fix endless loop in directory parsing

Pull iommu fix from Joerg Roedel:

 - Fix SVA handle sharing in multi device case

* tag 'iommu-fix-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/sva: Fix SVA handle sharing in multi device case

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix eMMC initialization with 1-bit bus connection

  MMC host:
   - mmci: Fix DMA API overlapping mappings for the stm32 variant
   - sdhci-xenon: Fix PHY stability issues"

* tag 'mmc-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-xenon: add timeout for PHY init complete
  mmc: sdhci-xenon: fix PHY init clock stability
  mmc: mmci: stm32: fix DMA API overlapping mappings warning
  mmc: core: Fix eMMC initialization with 1-bit bus connection

Pull pmdomain fixes from Ulf Hansson:

 - qcom: Fix enabled_corner aggregation for rpmhpd

 - arm: Fix NULL dereference on scmi_perf_domain removal

* tag 'pmdomain-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: qcom: rpmhpd: Fix enabled_corner aggregation
  pmdomain: arm: Fix NULL dereference on scmi_perf_domain removal

Pull EFI fixes from Ard Biesheuvel:
 "Only the EFI variable name size change is significant, and will be
  backported once it lands. The others are cleanup.

   - Fix phys_addr_t size confusion in 32-bit capsule loader

   - Reduce maximum EFI variable name size to 512 to work around buggy
     firmware

   - Drop some redundant code from efivarfs while at it"

* tag 'efi-fixes-for-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efivarfs: Drop 'duplicates' bool parameter on efivar_init()
  efivarfs: Drop redundant cleanup on fill_super() failure
  efivarfs: Request at most 512 bytes for variable names
  efi/capsule-loader: fix incorrect allocation size

Pull sound fixes from Takashi Iwai:
 "The amount of changes wasn't as small as wished, but all reasonably
  small fixes. There is a PCM core API change, which is for correcting
  the behavior change we took in 6.8. The rest are device-specific fixes
  for ASoC AMD, Qualcomm, Cirrus codecs, HD-audio quirks & co"

* tag 'sound-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2
  ASoC: amd: yc: add new YC platform variant (0x63) support
  ALSA: hda/realtek - ALC285 reduce pop noise from Headphone port
  ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk table
  ALSA: hda/realtek: Add special fixup for Lenovo 14IRP8
  ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()
  ALSA: hda/realtek: tas2781: enable subwoofer volume control
  ALSA: pcm: clarify and fix default msbits value for all formats
  ASoC: qcom: Fix uninitialized pointer dmactl
  ALSA: hda/realtek: fix mute/micmute LED For HP mt440
  ALSA: Drop leftover snd-rtctimer stuff from Makefile
  ALSA: ump: Fix the discard error code from snd_ump_legacy_open()
  ALSA: hda/realtek: Enable Mute LED on HP 840 G8 (MB 8AB8)
  ASoC: cs35l56: Must clear HALO_STATE before issuing SYSTEM_RESET
  ALSA: hda/realtek: Fix top speaker connection on Dell Inspiron 16 Plus 7630
  ALSA: firewire-lib: fix to check cycle continuity

Pull drm fixes from Dave Airlie:
 "Bunch of fixes, xe, amdgpu, nouveau and tegra all have a few. Then
  drm/bridge including some drivers/soc fallout fixes. The biggest thing
  in here is a new unit test for some buddy allocator fixes, otherwise a
  misc fbcon, ttm unit test and one msm revert.

  Seems pretty normal for this stage.

  buddy:
   - two allocation fixes + unit test

  fbcon:
   - font restore syzkaller fix

  ttm:
   - kunit test fix

  bridge:
   - fix aux-hpd leaks
   - fix aux-hpd registration
   - fix use after free in soc/qcom
   - fix boot on soc/qcom

  xe:
   - A couple of tracepoint updates from Priyanka and Lucas
   - Make sure BINDs are completed before accepting UNBINDs on LR vms
   - Don't arbitrarily restrict max number of batched binds
   - Add uapi for dumpable bos (agreed on IRC)
   - Remove unused uapi flags and a leftover comment
   - A couple of fixes related to the execlist backend

  msm:
   - DP: Revert a change which was causing a HDP regression

  amdgpu:
   - Fix potential buffer overflow
   - Fix power min cap
   - Suspend/resume fix
   - SI PM fix
   - eDP fix

  nouveau:
   - fix a misreported VRAM sizing
   - fix a regression in suspend/resume due to freeing

  tegra:
   - host1x reset fix
   - only remove existing driver if display is possible"

* tag 'drm-fixes-2024-03-01' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
  drm/nouveau: keep DMA buffers required for suspend/resume
  nouveau: report byte usage in VRAM usage
  drm/xe/xe_trace: Add move_lacks_source detail to xe_bo_move trace
  drm/xe: Deny unbinds if uapi ufence pending
  drm/xe: Expose user fence from xe_sync_entry
  drm/xe: Use pointers in trace events
  drm/xe/xe_bo_move: Enhance xe_bo_move trace
  drm/xe/mmio: fix build warning for BAR resize on 32-bit
  drm/xe: get rid of MAX_BINDS
  drm/xe: Use vmalloc for array of bind allocation in bind IOCTL
  drm/xe: Don't support execlists in xe_gt_tlb_invalidation layer
  drm/xe: Fix execlist splat
  drm/xe/uapi: Remove unused flags
  drm/xe/uapi: Remove DRM_XE_VM_BIND_FLAG_ASYNC comment left over
  drm/xe: Add uapi for dumpable bos
  drm/amd/display: Add monitor patch for specific eDP
  Revert "drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changes"
  drm/tests/drm_buddy: add alloc_range_bias test
  drm/buddy: check range allocation matches alignment
  drm/buddy: fix range bias
  ...

Merge tag 'probes-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull fprobe fix from Masami Hiramatsu:

 - allocate entry_data_size buffer for each rethook instance.

   This fixes a buffer overrun bug (which leads a kernel crash)
   when fprobe user uses its entry_data in the entry_handler.

* tag 'probes-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  fprobe: Fix to allocate entry_data_size buffer with rethook instances

Since tomoyo_write_control() updates head->write_buf when write()
of long lines is requested, we need to fetch head->write_buf after
head->io_sem is held.  Otherwise, concurrent write() requests can
cause use-after-free-write and double-free problems.
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://lkml.kernel.org/r/CAEkJfYNDspuGxYx5kym8Lvp--D36CMDUErg4rxfWFJuPbbji8g@mail.gmail.com
Fixes: bd03a3e4 ("TOMOYO: Add policy namespace support.")
Cc:  <stable@vger.kernel.org> # Linux 3.1+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SETUP_RNG_SEED in setup_data is supplied by kexec and should
not be reserved in the e820 map.

Doing so reserves 16 bytes of RAM when booting with kexec.
(16 bytes because data->len is zeroed by parse_setup_data so only
sizeof(setup_data) is reserved.)

When kexec is used repeatedly, each boot adds two entries in the
kexec-provided e820 map as the 16-byte range splits a larger
range of usable memory. Eventually all of the 128 available entries
get used up. The next split will result in losing usable memory
as the new entries cannot be added to the e820 map.

Fixes: 68b8e971 ("x86/setup: Use rng seeds from setup_data")
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/ZbmOjKnARGiaYBd5@dwarf.suse.cz

iommu_sva_bind_device will directly goto out in multi-device
case when found existing domain, ignoring list_add handle,
which causes the handle to fail to be shared.

Fixes: 65d4418c ("iommu/sva: Restore SVA handle sharing")
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240227064821.128-1-zhangfei.gao@linaro.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>

My recent commit e5d00aaa ("selftests/powerpc: Check all FPRs in
fpu_preempt") inadvertently broke the fpu_signal test.

It needs to take into account that fpu_preempt now loads 32 FPRs, so
enlarge darray.

Also use the newly added randomise_darray() to properly randomise darray.

Finally the checking done in signal_fpu_sig() needs to skip checking
f30/f31, because they are used as scratch registers in check_all_fprs(),
called by preempt_fpu(), and so could hold other values when the signal
is taken.

Fixes: e5d00aaa ("selftests/powerpc: Check all FPRs in fpu_preempt")
Reported-by: Spoorthy <spoorthy@linux.ibm.com>
Depends-on: 2ba107f6 ("selftests/powerpc: Generate better bit patterns for FPU tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240301101035.1230024-1-mpe@ellerman.id.au

The current method for signaling the compatibility of a Hyper-V host
with MSIs featuring 15-bit APIC IDs relies on a synthetic cpuid leaf.
However, for higher VTLs, this leaf is not reported, due to the absence
of an IO-APIC.

As an alternative, assume that when running at a high VTL, the host
supports 15-bit APIC IDs. This assumption is safe, as Hyper-V does not
employ any architectural MSIs at higher VTLs

This unblocks startup of VTL2 environments with more than 256 CPUs.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1705341460-18394-1-git-send-email-ssengar@linux.microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com>

Hogs are added *after* ACPI so should be removed *before* in error path.

Fixes: a411e81e ("gpiolib: add hogs support for machine code")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

In a CoCo VM, when transitioning memory from encrypted to decrypted, or
vice versa, the caller of set_memory_encrypted() or set_memory_decrypted()
is responsible for ensuring the memory isn't in use and isn't referenced
while the transition is in progress.  The transition has multiple steps,
and the memory is in an inconsistent state until all steps are complete.
A reference while the state is inconsistent could result in an exception
that can't be cleanly fixed up.

However, the kernel load_unaligned_zeropad() mechanism could cause a stray
reference that can't be prevented by the caller of set_memory_encrypted()
or set_memory_decrypted(), so there's specific code to handle this case.
But a CoCo VM running on Hyper-V may be configured to run with a paravisor,
with the #VC or #VE exception routed to the paravisor. There's no
architectural way to forward the exceptions back to the guest kernel, and
in such a case, the load_unaligned_zeropad() specific code doesn't work.

To avoid this problem, mark pages as "not present" while a transition
is in progress. If load_unaligned_zeropad() causes a stray reference, a
normal page fault is generated instead of #VC or #VE, and the
page-fault-based fixup handlers for load_unaligned_zeropad() resolve the
reference. When the encrypted/decrypted transition is complete, mark the
pages as "present" again.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-4-mhklinux@outlook.comSigned-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-4-mhklinux@outlook.com>

set_memory_p() is currently static.  It has parameters that don't
match set_memory_p() under arch/powerpc and that aren't congruent
with the other set_memory_* functions. There's no good reason for
the difference.

Fix this by making the parameters consistent, and update the one
existing call site.  Make the function non-static and add it to
include/asm/set_memory.h so that it is completely parallel to
set_memory_np() and is usable in other modules.

No functional change.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-3-mhklinux@outlook.comSigned-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-3-mhklinux@outlook.com>

In preparation for temporarily marking pages not present during a
transition between encrypted and decrypted, use slow_virt_to_phys()
in the hypervisor callback. As long as the PFN is correct,
slow_virt_to_phys() works even if the leaf PTE is not present.
The existing functions that depend on vmalloc_to_page() all
require that the leaf PTE be marked present, so they don't work.

Update the comments for slow_virt_to_phys() to note this broader usage
and the requirement to work even if the PTE is not marked present.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-2-mhklinux@outlook.comSigned-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-2-mhklinux@outlook.com>

Add documentation topic for PCI pass-thru devices in Linux guests
on Hyper-V and for the associated PCI controller driver (pci-hyperv.c).
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240222200710.305259-1-mhklinux@outlook.comSigned-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240222200710.305259-1-mhklinux@outlook.com>

A previous commit left the indentation in create_gpadl_header()
unchanged for ease of review. Update the indentation and remove
line wrap in two places where it is no longer necessary.

No functional change.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240111165451.269418-2-mhklinux@outlook.comSigned-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240111165451.269418-2-mhklinux@outlook.com>

create_gpadl_header() creates a message header, and one or more message
bodies if the number of GPADL entries exceeds what fits in the
header. Currently the code for creating the message header is
duplicated in the two halves of the main "if" statement governing
whether message bodies are created.

Eliminate the duplication by making minor tweaks to the logic and
associated comments. While here, simplify the handling of memory
allocation errors, and use umin() instead of open coding it.

For ease of review, the indentation of sizable chunks of code is
*not* changed.  A follow-on patch updates only the indentation.

No functional change.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240111165451.269418-1-mhklinux@outlook.comSigned-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240111165451.269418-1-mhklinux@outlook.com>