Skip to content

L
linux
Switch branch/tag
  1. 09 Feb, 2021 10 commits
    • Stefano Garzarella's avatar
      vsock: fix locking in vsock_shutdown() · 1c5fae9c
      Stefano Garzarella authored 
      In vsock_shutdown() we touched some socket fields without holding the
socket lock, such as 'state' and 'sk_flags'.

Also, after the introduction of multi-transport, we are accessing
'vsk->transport' in vsock_send_shutdown() without holding the lock
and this call can be made while the connection is in progress, so
the transport can change in the meantime.

To avoid issues, we hold the socket lock when we enter in
vsock_shutdown() and release it when we leave.

Among the transports that implement the 'shutdown' callback, only
hyperv_transport acquired the lock. Since the caller now holds it,
we no longer take it.

Fixes: d021c344 ("VSOCK: Introduce VM Sockets")
Signed-off-by: default avatarStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1c5fae9c
    • David S. Miller's avatar
      Merge branch 'hns3-fixes' · 49c2547b
      David S. Miller authored 
      Huazhong Tan says:

====================
net: hns3: fixes for -net

The parameters sent from vf may be unreliable. If these
parameters are used directly, memory overwriting may occur.

So this series adds some checks for this case.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      49c2547b
    • Yufeng Mo's avatar
      net: hns3: add a check for index in hclge_get_rss_key() · 532cfc0d
      Yufeng Mo authored 
      The index is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this index before using it in hclge_get_rss_key().

Fixes: a638b1d8 ("net: hns3: fix get VF RSS issue")
Signed-off-by: default avatarYufeng Mo <moyufeng@huawei.com>
Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      532cfc0d
    • Yufeng Mo's avatar
      net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx() · 326334aa
      Yufeng Mo authored 
      The tqp_index is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this tqp_index before using it in hclge_get_ring_chain_from_mbx().

Fixes: 84e095d6 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox")
Signed-off-by: default avatarYufeng Mo <moyufeng@huawei.com>
Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      326334aa
    • Yufeng Mo's avatar
      net: hns3: add a check for queue_id in hclge_reset_vf_queue() · 67a69f84
      Yufeng Mo authored 
      The queue_id is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this queue_id before using it in hclge_reset_vf_queue().

Fixes: 1a426f8b ("net: hns3: fix the VF queue reset flow error")
Signed-off-by: default avatarYufeng Mo <moyufeng@huawei.com>
Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      67a69f84
    • Vladimir Oltean's avatar
      net: dsa: felix: implement port flushing on .phylink_mac_link_down · eb4733d7
      Vladimir Oltean authored 
      There are several issues which may be seen when the link goes down while
forwarding traffic, all of which can be attributed to the fact that the
port flushing procedure from the reference manual was not closely
followed.

With flow control enabled on both the ingress port and the egress port,
it may happen when a link goes down that Ethernet packets are in flight.
In flow control mode, frames are held back and not dropped. When there
is enough traffic in flight (example: iperf3 TCP), then the ingress port
might enter congestion and never exit that state. This is a problem,
because it is the egress port's link that went down, and that has caused
the inability of the ingress port to send packets to any other port.
This is solved by flushing the egress port's queues when it goes down.

There is also a problem when performing stream splitting for
IEEE 802.1CB traffic (not yet upstream, but a sort of multicast,
basically). There, if one port from the destination ports mask goes
down, splitting the stream towards the other destinations will no longer
be performed. This can be traced down to this line:

	ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);

which should have been instead, as per the reference manual:

	ocelot_port_rmwl(ocelot_port, 0, DEV_MAC_ENA_CFG_RX_ENA,
			 DEV_MAC_ENA_CFG);

Basically only DEV_MAC_ENA_CFG_RX_ENA should be disabled, but not
DEV_MAC_ENA_CFG_TX_ENA - I don't have further insight into why that is
the case, but apparently multicasting to several ports will cause issues
if at least one of them doesn't have DEV_MAC_ENA_CFG_TX_ENA set.

I am not sure what the state of the Ocelot VSC7514 driver is, but
probably not as bad as Felix/Seville, since VSC7514 uses phylib and has
the following in ocelot_adjust_link:

	if (!phydev->link)
		return;

therefore the port is not really put down when the link is lost, unlike
the DSA drivers which use .phylink_mac_link_down for that.

Nonetheless, I put ocelot_port_flush() in the common ocelot.c because it
needs to access some registers from drivers/net/ethernet/mscc/ocelot_rew.h
which are not exported in include/soc/mscc/ and a bugfix patch should
probably not move headers around.

Fixes: bdeced75 ("net: dsa: felix: Add PCS operations for PHYLINK")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eb4733d7
    • David S. Miller's avatar
      Merge branch 'bridge-mrp' · 6bbc088d
      David S. Miller authored 
      Horatiu Vultur says:

====================
bridge: mrp: Fix br_mrp_port_switchdev_set_state

Based on the discussion here[1], there was a problem with the function
br_mrp_port_switchdev_set_state. The problem was that it was called
both with BR_STATE* and BR_MRP_PORT_STATE* types. This patch series
fixes this issue and removes SWITCHDEV_ATTR_ID_MRP_PORT_STAT because
is not used anymore.

[1] https://www.spinics.net/lists/netdev/msg714816.html
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6bbc088d
    • Horatiu Vultur's avatar
      switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT · 059d2a10
      Horatiu Vultur authored 
      Now that MRP started to use also SWITCHDEV_ATTR_ID_PORT_STP_STATE to
notify HW, then SWITCHDEV_ATTR_ID_MRP_PORT_STAT is not used anywhere
else, therefore we can remove it.

Fixes: c284b545 ("switchdev: mrp: Extend switchdev API to offload MRP")
Signed-off-by: default avatarHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      059d2a10
    • Horatiu Vultur's avatar
      bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state · b2bdba1c
      Horatiu Vultur authored 
      The function br_mrp_port_switchdev_set_state was called both with MRP
port state and STP port state, which is an issue because they don't
match exactly.

Therefore, update the function to be used only with STP port state and
use the id SWITCHDEV_ATTR_ID_PORT_STP_STATE.

The choice of using STP over MRP is that the drivers already implement
SWITCHDEV_ATTR_ID_PORT_STP_STATE and already in SW we update the port
STP state.

Fixes: 9a9f26e8 ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: fadd4091 ("bridge: switchdev: mrp: Implement MRP API for switchdev")
Fixes: 2f1a11ae ("bridge: mrp: Add MRP interface.")
Reported-by: default avatarRasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: default avatarHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b2bdba1c
    • Edwin Peer's avatar
      net: watchdog: hold device global xmit lock during tx disable · 3aa6bce9
      Edwin Peer authored 
      Prevent netif_tx_disable() running concurrently with dev_watchdog() by
taking the device global xmit lock. Otherwise, the recommended:

	netif_carrier_off(dev);
	netif_tx_disable(dev);

driver shutdown sequence can happen after the watchdog has already
checked carrier, resulting in possible false alarms. This is because
netif_tx_lock() only sets the frozen bit without maintaining the locks
on the individual queues.

Fixes: c3f26a26 ("netdev: Fix lockdep warnings in multiqueue configurations.")
Signed-off-by: default avatarEdwin Peer <edwin.peer@broadcom.com>
Reviewed-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3aa6bce9
  3. 08 Feb, 2021 2 commits
  5. 06 Feb, 2021 11 commits
  7. 05 Feb, 2021 10 commits
  9. 04 Feb, 2021 4 commits
  11. 03 Feb, 2021 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7