Remove the unused CFB/OFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the unused CFB/OFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the unused CFB/OFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

    
Remove the unused CFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

    
Remove the unused CFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the unused CFB/OFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the unused CFB/OFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the unused CFB/OFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the unused CFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the unused CFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When processing the last block, the s390 ctr code will always read
a whole block, even if there isn't a whole block of data left.  Fix
this by using the actual length left and copy it into a buffer first
for processing.

Fixes: 0200f3ec ("crypto: s390 - add System z hardware support for CTR mode")
Cc: <stable@vger.kernel.org>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewd-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pre-store the valid value of the zip alg support related capability
register in hisi_zip_qm_init(), which will be called by hisi_zip_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset failed
and the memory space disabled.

Fixes: db700974 ("crypto: hisilicon/zip - support zip capability")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pre-store the valid value of the sec alg support related capability
register in sec_qm_init(), which will be called by probe process.
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.

Fixes: 921715b6 ("crypto: hisilicon/sec - get algorithm bitmap from registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pre-store the valid value of hpre alg support related capability
register in hpre_qm_init(), which will be called by hpre_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.

Fixes: f214d59a ("crypto: hisilicon/hpre - support hpre capability")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In previous capability register implementation, qm irq related values
were read from capability registers dynamically when needed. But in
abnormal scenario, e.g. the core is timeout and the device needs to
soft reset and reset failed after disabling the MSE, the device can
not be removed normally, causing the following call trace:

	| Call trace:
        |  pci_irq_vector+0xfc/0x140
        |  hisi_qm_uninit+0x278/0x3b0 [hisi_qm]
        |  hpre_remove+0x16c/0x1c0 [hisi_hpre]
        |  pci_device_remove+0x6c/0x264
        |  device_release_driver_internal+0x1ec/0x3e0
        |  device_release_driver+0x3c/0x60
        |  pci_stop_bus_device+0xfc/0x22c
        |  pci_stop_and_remove_bus_device+0x38/0x70
        |  pci_iov_remove_virtfn+0x108/0x1c0
        |  sriov_disable+0x7c/0x1e4
        |  pci_disable_sriov+0x4c/0x6c
        |  hisi_qm_sriov_disable+0x90/0x160 [hisi_qm]
        |  hpre_remove+0x1a8/0x1c0 [hisi_hpre]
        |  pci_device_remove+0x6c/0x264
        |  device_release_driver_internal+0x1ec/0x3e0
        |  driver_detach+0x168/0x2d0
        |  bus_remove_driver+0xc0/0x230
        |  driver_unregister+0x58/0xdc
        |  pci_unregister_driver+0x40/0x220
        |  hpre_exit+0x34/0x64 [hisi_hpre]
        |  __arm64_sys_delete_module+0x374/0x620
        [...]

        | Call trace:
        |  free_msi_irqs+0x25c/0x300
        |  pci_disable_msi+0x19c/0x264
        |  pci_free_irq_vectors+0x4c/0x70
        |  hisi_qm_pci_uninit+0x44/0x90 [hisi_qm]
        |  hisi_qm_uninit+0x28c/0x3b0 [hisi_qm]
        |  hpre_remove+0x16c/0x1c0 [hisi_hpre]
        |  pci_device_remove+0x6c/0x264
        [...]

The reason for this call trace is that when the MSE is disabled, the value
of capability registers in the BAR space become invalid. This will make the
subsequent unregister process get the wrong irq vector through capability
registers and get the wrong irq number by pci_irq_vector().

So add a capability table structure to pre-store the valid value of the irq
information capability register in qm init process, avoid obtaining invalid
capability register value after the MSE is disabled.

Fixes: 3536cc55 ("crypto: hisilicon/qm - support get device irq information from hardware registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Extract a public function to set qm algs and remove
the similar code for setting qm algs in each module.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There is a dead-lock in the hwrng device read path.  This triggers
when the user reads from /dev/hwrng into memory also mmap-ed from
/dev/hwrng.  The resulting page fault triggers a recursive read
which then dead-locks.

Fix this by using a stack buffer when calling copy_to_user.
Reported-by: Edward Adam Davis <eadavis@qq.com>
Reported-by: syzbot+c52ab18308964d248092@syzkaller.appspotmail.com
Fixes: 9996508b ("hwrng: core - Replace u32 in driver API with byte array")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Factor out duplicated skcipher fallback handling code to a helper function
sahara_aes_fallback(). Also, keep a single check if fallback is required in
sahara_aes_crypt().
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The "error" field in sahara_dev struct hasn't been needed/used since commit
c0c3c89a ("crypto: sahara - replace tasklets with kthread"), so remove
the remaining references.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Do not call dma_unmap_sg() for scatterlists that were not mapped
successfully.

Fixes: 5de88752 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

It's not always the case that the entire sg entry needs to be processed.
Currently, when cryptlen is less than sg->legth, "Descriptor length" errors
are encountered.

The error was noticed when testing xts(sahara-ecb-aes) with arbitrary sized
input data. To fix this, take the actual request size into account when
populating the hw links.

Fixes: 5de88752 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

update() calls should not modify the result buffer, so add an additional
check for "rctx->last" to make sure that only the final hash value is
copied into the buffer.

Fixes the following selftest failure:
alg: ahash: sahara-sha256 update() used result buffer on test vector 3,
cfg="init+update+final aligned buffer"

Fixes: 5a2bb93f ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The kernel crypto API requires that all CBC implementations update the IV
buffer to contain the last ciphertext block.

This fixes the following cbc selftest error:
alg: skcipher: sahara-cbc-aes encryption test failed (wrong output IV) on
test vector 0, cfg="in-place (one sglist)"

Fixes: 5de88752 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the FLAGS_NEW_KEY logic as it has the following issues:
- the wrong key may end up being used when there are multiple data streams:
       t1            t2
    setkey()
    encrypt()
                   setkey()
                   encrypt()

    encrypt() <--- key from t2 is used
- switching between encryption and decryption with the same key is not
  possible, as the hdr flags are only updated when a new setkey() is
  performed

With this change, the key is always sent along with the cryptdata when
performing encryption/decryption operations.

Fixes: 5de88752 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Macro dma_map_sg() may return 0 on error. This patch enables
checks in case of the macro failure and ensures unmapping of
previously mapped buffers with dma_unmap_sg().

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 49186a7d ("crypto: inside_secure - Avoid dma map if size is zero")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add clk_disable_unprepare() in the error path in stm32_rng_init().

Fixes: 6b85a7e1 ("hwrng: stm32 - implement STM32MP13x support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There are limited number CPT LFs (example 64 LFs on cn10k) and
these LFs are allocated/attached to CPT VF on its creation.
cptpf sysfs parameter "kvf_limits" defines number of CPT LFs
per CPT VF. Default "kvf_limits" is initialized to zero and if
kvf_limits is zero then number of LF allocated are equal to
online cpus in system.

For example on 24 core system, 24 CPT LFs will be attached per VF.
That means no CPT LF available when creating more than 2 CPT VFs
on system which have total 64 LFs. Although VFs gets created but
no LF attached to it.

There seems no reason to default allocate as many LFs as many
online cpus in system. This patch initializes "kvf_limits" to
one to limit one LF allocated per CPT VF. "kvf_limits" can
be changed in range of 1 to number-of-online-cpus via sysfs.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There is a possibility that the function adf_devmgr_pci_to_accel_dev()
might return a NULL pointer.
Add a NULL pointer check in the function rp2srv_show().

Fixes: dbc8876d ("crypto: qat - add rp2svc sysfs attribute")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: David Guckian <david.guckian@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the function validate_user_input() returns an error, the error path
attempts to unlock an unacquired mutex.
Acquire the mutex before calling validate_user_input(). This is not
strictly necessary but simplifies the code.

Fixes: d9fb8408 ("crypto: qat - add rate limiting feature to qat_4xxx")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The input argument `sla_in` is a pointer to a structure that contains
the parameters of the SLA which is being added or updated.
If this pointer is NULL, the function should return an error as
the data required for the algorithm is not available.
By mistake, the logic jumps to the error path which dereferences
the pointer.

This results in a warnings reported by the static analyzer Smatch when
executed without a database:

    drivers/crypto/intel/qat/qat_common/adf_rl.c:871 add_update_sla()
    error: we previously assumed 'sla_in' could be null (see line 812)

This issue was not found in internal testing as the pointer cannot be
NULL. The function add_update_sla() is only called (indirectly) by
the rate limiting sysfs interface implementation in adf_sysfs_rl.c
which ensures that the data structure is allocated and valid. This is
also proven by the fact that Smatch executed with a database does not
report such error.

Fix it by returning with error if the pointer `sla_in` is NULL.

Fixes: d9fb8408 ("crypto: qat - add rate limiting feature to qat_4xxx")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Having multiple in-flight AIO requests results in unpredictable
output because they all share the same IV.  Fix this by only allowing
one request at a time.

Fixes: 83094e5e ("crypto: af_alg - add async support to algif_aead")
Fixes: a596999b ("crypto: algif - change algif_skcipher to be asynchronous")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Kai Ye is no longer participates in the Linux community.
Zhiqi Song will be responsible for the code maintenance of the
HPRE module.
Therefore, the maintainers list needs to be updated.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When dma_map_single() fails, wa->address is supposed to be freed
by the callers of ccp_init_dm_workarea() through ccp_dm_free().
However, many of the call spots don't expect to have to call
ccp_dm_free() on failure of ccp_init_dm_workarea(), which may
lead to a memleak. Let's free wa->address in ccp_init_dm_workarea()
when dma_map_single() fails.

Fixes: 63b94509 ("crypto: ccp - CCP device driver and interface support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Return crypto_aead_setkey() in order to transfer the error if
it fails.

Fixes: d2c8ac18 ("crypto: sa2ul - Add AEAD algorithm support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1. Remove redundant array element, prevent the size obtained by
ARRAY_SIZE() from qm_log_hw_error is greater than actual size.
2. Add comments in function qm_set_vf_mse() and qm_cq_ctx_cfg()
to make it easier to understand.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The 'QM_INIT' and 'QM_CLOSE' status of qm and 'QP_INIT'
and 'QP_CLOSE' status of queue are not actually used. Currently,
driver only needs to switch status when the device or queue
is enabled or stopped, Therefore, remove unneeded status to
simplify driver. In addition, rename'QM_START to'QM_WORK' for
ease to understand.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1. Remove unnecessary brackets in function hisi_acc_create_sgl_pool().
2. Modify local variable type, ensure that the variable type is
consistent with the variable type to be compared.
3. Because the function clear_hw_sgl_sge() is in the task process,
obtain the value of le16_to_cpu(hw_sgl->entry_sum_in_sgl) before
loop execting to shorten the loop execution time.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To meet specific application scenarios, the function of switching between
the high performance mode and the high compression mode is added.

Use the perf_mode=0/1 configuration to set the compression high perf mode,
0(default, high compression mode), 1(high performance mode). These two
modes only apply to the compression direction and are compatible with
software algorithm in both directions.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The compiler doesn't know that `32` is an offset into the Hash table:

 56 struct Hash_ctx {
 57         u8 H[16];       /* subkey */
 58         u8 Htable[256]; /* Xi, Hash table(offset 32) */
 59 };

So, it legitimately complains about a potential out-of-bounds issue
if `256 bytes` are accessed in `htable` (this implies going
`32 bytes` beyond the boundaries of `Htable`):

arch/powerpc/crypto/aes-gcm-p10-glue.c: In function 'gcmp10_init':
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: error: 'gcm_init_htable' accessing 256 bytes in a region of size 224 [-Werror=stringop-overflow=]
  120 |         gcm_init_htable(hash->Htable+32, hash->H);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 1 of type 'unsigned char[256]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 2 of type 'unsigned char[16]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:40:17: note: in a call to function 'gcm_init_htable'
   40 | asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]);
      |                 ^~~~~~~~~~~~~~~

Address this by avoiding specifying the size of `htable` in the function
prototype; and just for consistency, do the same for parameter `Xi`.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20231121131903.68a37932@canb.auug.org.au/Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The qat_rl sysfs attribute group is registered within the adf_dev_start()
function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_rl attribute group was successful or not.

In cases where this condition is encountered, an error similar to
the following might be reported:

    4xxx 0000:6b:00.0: Starting device qat_dev0
    4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
    4xxx 0000:6b:00.0: Failed to send init message
    4xxx 0000:6b:00.0: Failed to start device qat_dev0
    sysfs group 'qat_rl' not found for kobject '0000:6b:00.0'
    ...
    sysfs_remove_groups+0x2d/0x50
    adf_sysfs_rl_rm+0x44/0x70 [intel_qat]
    adf_rl_stop+0x2d/0xb0 [intel_qat]
    adf_dev_stop+0x33/0x1d0 [intel_qat]
    adf_dev_down+0xf1/0x150 [intel_qat]
    ...
    4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
    4xxx 0000:6b:00.0: Resetting device qat_dev0

To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.

Fixes: d9fb8408 ("crypto: qat - add rate limiting feature to qat_4xxx")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>